Win10/problems

Similar Questions

• Inspiron 5748 - new battery, do not charge, new adapter not recognised...jack/socket or Win10 problem?

  Battery does not charge in my Inspiron 5748 - Intel [email protected] / 8 GB RAM / 1 TB drive / two years. I replaced the charger and the battery but the problem persists. I've seen on other mobile messages and wonder if this could be a problem with the connector/plug (between the adapter and laptop), and if I could replace that? In addition, the problem seems to have started when we went from Win8.1 to Win10; would that be a problem?

  It is a hardware issue that will not be solved by a BIOS update.

  If the system is under warranty, call Dell for the repair or replacement of the adapter / power to the system.

  If it is out of warranty,

  1. try a new adapter Dell OEM.  It can solve the problem.

  2. in the case, replace the DC Jack:

  www.Parts-People.com/index.php

  3. If that does not resolve the problem, it is the motherboard that is defective and must be replaced.

• XPS13-9350 Linux to Win10 problems

  Hi all

  I got my brand new XPS13-9350 today. I ordered it with Linux as an operating system. As I have a few Win10 spare Pro licensed, I did a clean install of Win10 Pro. So far so good, except for two issues:

  In Device Manager, IDE ATA/ATAPI controllers entry has a yellow exclamation point and wrote:

  "This device cannot start. (Code 10). A card i/o hardware error has occurred. "

  I installed the Intel Chipset driver from the dell Web site.

  Also, if I go to the dell drivers page and do "detect the drivers", I get

  Detection of driver is not available
  Please try again later or use find it it me tab to find the drivers for the Service label or consult the list of the drivers available for your product.

  I tried to download a windows restore image, but it seems that I can't do that, because my computer is configured with Linux.

  I would be grateful for any advice what I can do.

  Thank you very much

  This mode is the nec - AHCI or RAID system?

  Have you installed the Intel storage driver:

  >

  ?

• Pavilion 15 L3S53EA: Problem with my audio

  I have a HP laptop with beats speakers.

  I also discovered that I have the Beats Audio software on my laptop.

  I use Realtek High Definition Audio driver, but when I installed it first time sound was fine and clear.

  Later, it became a kind of "distorted", and I think it's because of Beats Audio software.

  I have read many solutions, but they do not work for me.

  The sound is terrible, and it drives me crazy, so please help!

  I have a Pavilion L3S53EA 15.

  M4rin

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about your recent audio quality in Win10 problems and wanted to help.
  
  Whenever someone comes here running Win10 and complains about something just suddenly does not work, I immediately suspect driver updates Windows.
  
  Unfortunately, Win10 forces automatically updates driver on each of us, without our knowledge and without our permission - and in this case, a work PC is suddenly 'broken '.  This could happen to you.
  
  You must go to the settings, update & Security-> Windows Update.
  
  Then, choose Advanced-> history to see when the updates have been applied last.  If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem.  Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.
  
  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/15989-device-driver-automatic-installation-turn-off-windows-10-a.html
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• I was wondering if there were other problems with Adobe CC and the last IOS El captain?

  I've recently updated to IOS Yosemite to El Capitan, when I went to launch Premiere Pro for the first time, there were a few very visible differences of how things went, if not, the program has worked very well.

  Thinking that this might just be a problem after installing just El Capitan, I thought that a reboot would clear things up. When I went to restart, I could not go beyond the initial start-up of the grey Apple screen, I ended up having to wipe the drive and reinstall El Capitan, nd, then migrate my data from my backup of TM, what a shot, it took hours to complete.

  Anyone else having similar problems? Anyone know when Adobe get out their CC to CE upgrade?

  I don't know about Apple (I'm on Windows), but I read that Microsoft has a way to restore the previous operating system if an upgrade to Win10 does not work

  I don't want to know about it, because my Win8.1 works with all my current software... I have read Win10 problems with the software that I have now, so I will NOT go to Win10

  If Apple does not offer a way back to the BONE you had before, I think you're stuck with problems until 'the 3rd party vendors' make changes to work with El Capitan

  And, if you do a "time machine" backup before the upgrade, be aware that TM backups do NOT work with Adobe because of... hidden folders software then you would need to uninstall and reinstall

  And just so you know, Microsoft has also problems with Mac 10.11 El Capitan

  -http://www.macrumors.com/2015/10/05/microsoft-office-2016-el-capitan-bugs/

• Pavilion 15-ab023AX: install Windows 10

  I have a new computer laptop (about 2 months) and I tried to load windows 10 that several times but it does not load. Says it is restarts and he's back to 8.1 for Windows.
  
  Also don't know if this is related to the attempt to load windows 10 or not, but continues to go from my black screen and I have to restart.

  neighbour5

  It's a good decision.  You'd be surprised how many people insist on lameness with a paralyzed machine that works — JUST so they can operate "the last and largest" Windows operating system - v10!

  Myself, I got tired of Win10 problems and returned to Win8.1 - because I like a machine where everything works.

• TRYING TO PLAY THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  Original title: papabob68

  have windows 7-

  I'M PLAYING THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  After that, I have to go to master to stop and start again... I have read all the post I can find and I updated the driver and reset the display and SO ON, SO ON, AND...

  I played this game on windows xp and I have done everything but put A BULLET in it and I think about IT!

  I'd be willing to by a new game made for windows 7 but does...

  MANY OF THE POST TALK ABOUT A 64-BIT SYSTEM, BUT MINED IS A 32-BIT, SO THERE HAS NOT BEEN TWO MANY ANSWERS...

  "HELP!" @!@!

  PAPABOB68

  "I updated the driver and reset the display and SO ON, SO ON, AND ON...". »

  It is better to translate 'SO ON'... to something specific, or you can read suggestions for

  have you tried things once again.

  -Include your brand of processor graphics and model as well.

  -The best place for the hotfixes to vintage games is usually on a specific to this game fan site,

  or the developer forums, but...

  "but mine is 32 bits"

  (Assuming you are using the disk depending on the version of the game.)

  -A 32-bit Windows can be an advantage with some games of this vintage (release date of 97) as

  always use a 16-bit Installer, which will run on 32-bit but not 64-bit of Windows.

  Apart from that, there should be no difference between the OS versions for compatibility.

  -However, prior to version 2000 games (and some newer), may have other

  questions that make them run poorly. Audio and color are two common problems.

  -The camera may result from a problem with earlier versions of Open GL, Direct 3D.

  DirectPlay and Glide3D (gone, but not forgotten) can be a problem sometimes too?

  These questions sometimes have patches on based fan sites.

  -Some 97 games maybe still based back that requires using the window BACK, an emulator "BACK."

  Good old games sells some vintage games with DRM (copy of code protection) removed, and installs

  with BACK box automatically.

  They have Panzer General 2 for $10 USD, but if you expect one of their frequent sales you should be

  able to pick up for US $5-$ or less.

  http://www.Gog.com/

  [ EDIT: just watched add it, and it seems to be a DirectX game 9] It must have been updated DX9

  for the downloadable version.

  It can been Direct3D when released.  DX 9 was not released before 2002

  -All on the theme of DirectX. If you have not updated DirectX, you should do it.

  Win7 is not the most recent DX 9, 10 or 11 files when first installed.

  Download installer Web Runtime DirectX end-user of the official Microsoft Download Center ]     

  -You can also use D-Fend Reloaded, which is a user interface that reduces the learning curve for the DOS window.

  The download includes the box and a few BACK based games start practicing.

  D - Fend Reloaded: overview

  Finally, and above all by an effort... An important announcement for all users of the disk based games.

  -A new (since Win10) problems with the old disk based games comes from malicious software developed by MS - DRM blocking.

  If your disc games has a file called - secdrv.sys - on it, the game will be blocked by a

  Windows 'security update' - KB3086255-.

  I have more information about the blocking of the DRM, including how to work around this - here -

  .

• alerts to activate after update of Windows 10

  After an automatic update Windows 10 about 2 weeks, I
  Get Adobe activation alert "Activation limit reached for CS5.5 Master
  Collection"every time I start an application such as Photoshop Acrobat Adobe or
  Acrobat. The alert said that my Adobe software will stop working in the next few days.
  Is there a a way to solve this problem by resetting the activation limit?

  I have several work projects using Adobe Mater
  Collection. I've been spending money and time on them. They are now in danger
  not working more.

  Adobe Master Collection CS5.5 was original installed in my
  PC with operating system Windows 7. Around July 2016, my PC has been upgraded to
  Windows 10 by itself without my consent. It seems the Adobe activation alert
  did not come to the top right after the immediate passage of the upgrade to Windows 7
  10 Windows. Only in about 2 weeks, the 10 Windows updated itself again
  automatically and alerts activation limit comes all the time.

  Please, is it possible to set the activation
  problem? I now fear that all applications of third party software
  specific Adobe applications, which I've previously installed on my PC with Windows 7
  probably will not work on Windows 10. I must restore to Windows 7 in order
  having CS5.5 Master Collection working correctly?

  If your problem REALLY is associated with activation, here is the link

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

  Given that your problem started with a Win10 update, personally, I doubt you have a problem with the activation... you have a Win10 problem

  If the imaging program that you use also captures the hidden record files, dating back to Win7 should work... then, you need to set your options of Windows Update (something like) "Tell me about updates, but do NOT install automatically" or later, you'll be immediately where you are now, with causing the problems with old programs Win10

• Audio problem in macbookpro with win10

  Hello

  I installed win10 in my macbookpro 2011.

  There are a few problems with the audio. He said: "no audio output device is installed".

  I searched internet everywhere for solution and drivers... .but none of them worked.

  Thank you.

  Howdy Abel K,.

  You're supposed to be unable to hear the audio at all when you are booted into Windows 10 in your Boot Camp partition on your Mac. I advise to use this article to help resolve this problem:

  If you do not see some Mac functionality if you are using Windows on your Mac

  Thank you for using communities of Apple Support.

• Win10 on end 2011 17' MacBookPro problem

  I'm running the Mavericks on a MacBookPro end of 2011 10.9.5 with 2.4 ghz I7 and 16 gig of ram.  Installed under bootcamp 7ish Win many moons ago. Upgrade to Win8.1 and everything was fine.  When Win10 came out, it was a free downloadable update so I did. What I failed to do, it was note the Bootcamp update initially in Win10 after the upgrade. I restarted for some reason any and am now takeen for diagnosis Win10 Panel whenever I try to start on the side of victory. Nothing seems some problem I have... I know that there is lack of support on the Mac for Win10 old but seems to be reading people who have success with this combo...

  What I might try here?

  You can post a screenshot of the Panel Diagnostics and error code?

• Connection problem Ipod mini, 2005 with win10 model

  Hello! I have an Ipod mini, 2005 model, and I decided to use it again after many years. My problem is that when I connect the camera with my PC (win10 + itunes 12.3), there is nowhere in my PC or itunes. It starts to load, but that's all. Is there a way to make it work, or it is old and I forget it? Thank you very much!

  When you connect it, look at the screen of the iPod.  It recognizes the data connection (said 'do not disconnect')?  Or does only show the battery charge indicator?

  FYI - I have a mini iPod, and it works with the latest version of iTunes.

• Shutdown/sleep problems Win10 V5-573-54204G50aii and similar models

  Hello

  I have an acer aspire v5 - 573 and its got some problem with win10.

  go to sleep is not turned off in all parts of the pc.

  the operating system goes into sleep mode and the screen turns off, but the fans continue to operate and it remains hot and unresponsive.

  the only way out of this State is force it off by holding the power button.

  which obviously stop the machine completely and if the sleep state saved is lost when its powered upwards again.

  So basically the day before is unusable.

  with respect to the regular diet down, it only works if I arrested him shortly after the start (maybe an hour or two).

  If the machine is on for longer than this, a judgment will result in the same State, as described above for

  standby. pretty funny if I run the system for a few hours (until a stop working properly) and then do a restart, it restarts, but instead correctly stop...

  I have gone through several complete relocations of a different version of win10 and have installed the latest drivers acer and no other programs. the problems persist. In addition, a friend of mine who has a different configuration of this acer aspire model v5 - 573, knows very similar if not exactly the same questions.

  y at - it a fix for this? everyone knows about similar problems?

  It is a known compatibility issue with computers Intel Haswell-ULT (e.g. 4200U i5, i5 4210U i7 4500U) and the driver Windows 10 Intel Management Engine Interface 11.0.0.1146.

  The most commonly used workaround is to use the Windows 8.1 Intel Management Engine Interface 9.5.24.1790 driver.   If you're lucky, it's just a simple matter to go to the Device Manager and roll back the driver.  If you did a clean installation of Windows 10, rollback may not work, and you may need to install 9.5.24.1790.

  https://community.Acer.com/T5/Windows-10/aspire-V5-573G-freezes-instead-of-sleep-irregularly-not/m-p...

  If you need more information or details, please search in the forum that there are hundreds of positions on the issue.

  Here is an another computer Haswell-LATER with the same problem.

  Insofar as a long term solution, I don't know.  I do not work for Acer and only Acer or Intel or Microsoft could answer that.  This Windows 8.1 MEI driver is probably the solution long term.

• [IMPORTANT] Problem of BSoD (CLOCK_WATCHDOG_TIMEOUT) with Win10

  ENGLISH___

  Hello. A few years ago, I bought a HP dv5-1110el with Windows Vista 32-bit.

  I have updated first to Win7, of Win8, without problems or issues.

  Last Saturday, I installed Win10 Technical Preview on the PC. Today I tried to update the drivers. Then, I have updated the BIOS. When I was updating to BIOS with HP software (Insyde? I remember not so good...) a Blue Screen of Death came. The error was CLOCK_WATCHDOG_TIMEOUT.

  Here's a picture: http://www.tomshw.it/forum/attachments/windows/134199d1415713193-urgente-problema-clock_watchdog_tim...

  The computer did not stop, so I removed the battery.

  When I rebooted, it did not start the BIOS and the screen remains black.

  Now, whenever I start it up, the BIOS and the operating system don't start and I can't use the PC.

  HOW DO I RESTORE THE BIOS THO THE PREVIOUS STATE/SETTINGS?

  Please, help me!

  ITALIAN___

  Ciao gente. Some anno fa ho labor-intensive UN HP dv5-1110el con preinstallato 32-bit of Windows Vista.

  The Ho aggiornato prima a Win7 e poi a Win8 senza avere problemi di sorta malfunzionamenti o.

  Sabato during vi ho da sopra Win10 Technical Preview. Nono ho avuto some problema finchè oggi non ho aggiornato I have drivers. dopo, ho tried ad aggiornare he con BIOS program Bolivia dalla HP, TR chiamasse Insyde credo che, o qualcosa del genere. Stavo Mentre Aggiornando it BIOS software col e tanto temuta schermata blu di comparsa dead stupid error CLOCK_WATCHDOG_TIMEOUT.

  ECCO immagine: http://www.tomshw.it/forum/attachments/windows/134199d1415713193-urgente-problema-clock_watchdog_tim...

  It computer no may alla pressure dei tasti, do so spegneva come invece promised dalla schermata, Così ho rimosso the batteria.

  Quando Ho fatto centred, he BIOS simply because no e avviato despite the fan funzionassero e luci e the screen e was nero.

  Adesso ogni volta che provo ad accenderlo do it BIOS do ovviamente he partono operating system, it pc non reagisce one

  COME POSSO FARE BY FOURTH IT BIOS ALLE IMPOSTAZIONI DI FABBRICA O MEGLIO ANCORA ALLO STATO PREVIOUS?

  Per favore, SAVE!

  Follow the instructions on the following web document. Start with the key combination Win + B.

  http://support.HP.com/us-en/document/c02693833

• Adapter WiFi has worked with win7 being automatically updates to adapter Win10 has problems

  I have NOT upgraded to Win10.

  I have a Dell Inspiron 660 Win7 Home Premium Service a running package.

  My wireless adapter is a Dell 1506 wireless 802.11b/g/n (2.4 GHz)
  Qualcomm's Atheros Communications 9.2.0.512 10/23/2012 is the driver and the date of the driver (the last a Dell has on their site).

  Given that I have automatic updates on Windows I have all the latest windows dates.

  Throughout the last two months my adapter is hard to connect to the wireless network after sleeping. Re-booting does not help.

  I have all the power management options that are set for maximum performance and it did not help.

  I also unchecked the box for "Allow the computer to turn off this device to save power" in the adapter properties

  I have updated the driver after downloading from the Dell Web site. No help.

  I deleted the driver then re-installed the driver card without help.

  I received a message to upgrade to Win10 and all my gear is comparable to Win10.

  I've had this computer for two years and the adapter worked without problem until recently.

  I know that the router works fine my Galaxy Tablet works fine right next to the computer.

  Thank you

  try the command prompt type: "" netsh interface ip delete arpcache"" and tab

  and also "«ipconfig \flushdns»»