Win7 and CS3 camera Cal

Similar Questions

• I have LR5 and CS3 on Win7. Merge to Panorama worked perfectly until I had a crash.

  I rebooted both now "merge to Panorama in Photoshop' so that 'Open as Smart Object in Photoshop', 'merge to HDR in Photoshop' and 'Open as layers in Photoshop' are all greyed out. "Editing in another Application" and "Edit in Photoshop CS3" are good and work very well. Still, Photoshop doesn't views ok on his own, just no longer in conjunction with LR. I rebooted LR5 and CS3 again, haven't installed update - no change. Any help would be appreciated.

  J.R.S.

  Yes, I uninstalled and reinstalled both requests, and I work with original images. I probably have about two dozen panoramas before the crash.

  Thank you, JRS

• Profiles of cameras to CS3, Camera Raw 4.6

  I had a major computer failure and had to buy a new one.

  I loaded PS CS3 again, did the upgarde which seems to have been successful and have Camera Raw 4.6, but when I look at camera profiles it only shows ACR 4.4, ACR 3.6, none of the camera profiles are visible has no option for standard Adobe I had before.

  I went to the Adobe site to download the latest Camera Raw, which is for CS3 4.6, which I already.

  I downloaded the beta versions of profiles camera on Adobe labs some years back and everything worked fine. My new computer doesn't has no connections to allow me to run my old hard drive (again) that has profiles of camera download top otherwise I would have loaded their place again.

  I'm doing something wrong?
  Any suggestions gratefully received.

  James

  DNG profiles can be loaded by running the latest DNG Converter installation program of the DNG product Page.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• How can I recover my favorites after having reinstalled Win7 and Firefox?

  I had to reinstall Win7 and Firefox and now need to find my bookmarks file and put it back in Firefox. What is called, and where is it located?

  These backup files are compressed and not human readable. You can use it to completely replace your current set of bookmarks using the rollback feature (see beyond the dates at the bottom of the menu "Choose file...).

  • Restore backup bookmarks or move them to another computer

  Important: A restore completely replaces your current set of bookmarks. If you have saved any new bookmarks you need, add a few steps:

  (1) export current bookmarks to a file as HTML: Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
  (2) then do the restore
  (3) import this file in HTML format: import bookmarks to an HTML file
  (4) move the Bookmarks imported into their correct locations (they should be a folder of bookmarks imported somewhere on the menu bookmarks or Unsorted bookmarks)

• Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

  Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

  I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

  Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

  I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

  Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
  Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

  If someone could have some drivers or set which will slow down the fan under 64-bit windows?

  T.

  Hello

  You can set Windows Power plan settings in order to improve the cooling system.

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

  Try this settings:
  Plan (Toshiba power save) optimised battery
  Technology Intel Turbo Boost (BIOS) - disable
  The CPU always low frequency

  From my experience, this should reduce the noise.

• Camileo B10, what happens if the USB is connected to the PC and the camera is on shot?

  Manual says that to charge battery camera must be set to off. The question is how the camera behaves if usb is plugged (and power) and the camera is turned on? It works normally, but battery is not looking or camera will take it s usb power and battery power or what? I ask this because I am in need of camera that should save minimum 4 hours without interruptions.

  Hello

  > Manual says that to charge battery camera must be set to off
  > Is that it works normally, but battery is not looking or camera will take it s usb power and battery power or what?

  I think it's just because common USB port provides 500mAh and I don t think it would be enough to charge the battery and to power the display, etc...

  I m no owner of the Camileo b10 but I have a: 30 and if the camera is turned on, the laptop will recognize this as an external storage and cam. But I charge the battery with the external AC adapter.

• buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

  buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

  No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

• Error of flow OR MAX and attribute camera out of reach

  I recently bought a camera Point Grey Grasshopper3, it seems to work fine at point software fly Cap Gris provides, but I get an error NI Max when I try to do a simple puncture (see below). This error appears every time I try to catch a time image the first after the opening OR MAX, even if the flow is set to maximum. Then I change the flow under control of the unit to any integer 125000000 max, and the camera works very well for MAX. It will capture images as much as I need. Then I save the camera output MAX, open MAX once again, it shows my saved settings, I'm going to capture images and I get the error again. If I change the range regardless of the number and it works again in the same session in MAX.

  I had a gray point Zebra2 work very well and he used in my program LabVIEW with IMAQdx to acquire images. When I try to use grasshopper3, LabVIEW returns error attribute camera out of reach of the VI camera configuration. I use to test the camera of the VI is the camera just to open, configure acquisition, start acquiring, get the picture, cancel the acquisition and nearby IMAQdx camera configuration. I did twice open MAX, change the flow, save the camera, close MAX without grasping an image and then was able to acquire images in LabVIEW in the first inning. I would run the VI once again and then it returns the error to attribute camera out of reach. I changed the packet size, resolution and the frame rate of the camera with a difference in errors.

  Since I am able to images of the stream from the camera to the gray point fly capture and Max after activating/deactivating the flow layout, it leads me to believe there is some sort of error MAX/LabVIEW that prevent me to capture the images.

  Any ideas? Has anyone else had this problem with MAX and LV?

  Looks like the point Grey cameras showed this error before the firmware on the basis. See this linkfor such a forum. I would monitor the camera (*.icd) file located in the data folder IMAQdx in public Documents to see if the actual value is be replaced after the configuration of the camera has been saved in MAX. There is a chance that the GigE. XML file which is transferred from the camera is overwrite these values in the unacceptable value. See this linkfor a KB about this error, which leads me to believe that this may be the problem.

• 8235 PCIe and several cameras

  I have just connected a second camera of Basler (sc640-70gc) to a PCIe-8235.  The problem is that NIMAX sees only one of them, either the original or the newest one.  I tried different ports and cables; doesn't make a difference.  Any suggestions?

  Hello RTA,.

  If you are running Windows 2000 or XP and you use link-local-addressing (the automatic IP address in the 169.254.x.x range) this is an artifact of a gap in the network stack because it does not properly filter the broadcast by network interface traffic when multiple devices have identical configured subnet information (technical explanation long omitted...)

  The good news is that there are many solutions to this problem:

  -Since you are using the PCIe-8235, you can use our High-Performance GigE Vision driver. When it is installed you can then fill all 4 ports together into a single virtual device network card and this has solved the problem because you only have a link-local IP address configured. All 4 ports act as if they are part of a switch and cameras can easily be moved between them. I think that the manual or guide start-up for the 8235 includes documentation on how to do it. All you have to do is to go to the network connections page, select all the 4 network ports, right click and select "bridge connections".

  -Another option is to assign manual IP addresses in different subnets for each port and the device. A port can be 192.168.0.1 with the subnet mask of 255.255.255.0 correspondent, and his camera would be 192.168.0.2. The following port would be 192.168.1.1 and so on. You can use the configuration utility IP of Basler to assign these IP addresses for the cameras. However, this becomes a bit a maintenance problem that you have for the right camera the right way-related stays.

  -The last option is to upgrade to Windows Vista or later version, which corrects the network stack such that multiple interfaces can use link-local address perfectly.

  Hope this helps,

  Eric

• HP and Sony camera

  I have a Sony DSC T10 and a HP Envy I7 TS with Windows 8.1 and the camera is not recognized when plugged into a USB port.  Device Manager does not recognize the device.  Installing the updated Sony software and it does not find the device.  Any ideas, please.

  Hi clb7122,

  When a device is not recognized by the computer, it can be for several reasons. I've included the document "troubleshooting USB (Windows 8) connections." Please select the option for USB device not detected by Windows (no name of device in the Device Manager)and follow the General troubleshooting steps.

  Please let me know the result of the resolution of problems and if you are able to correctly, connect your camera after troubleshooting.

  Thank you.

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white.

  NETWORK CONNECTIONS

  Can anyone help? My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white, nothing at all, no icons, nothing.        Sincerely, Merlin

  Can you do a system restore at the time where it did not work properly? http://www.officeforlawyers.com/tips/sysrestore.html

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• I bought a computer from a business and it came not with all drives.

  Original title: I bought a computer and it came not with all drives.

  I bought a computer from a business, and it was a computer on the network. It came not with all drives. Is it possible to reformat the system with out having to re - buy windows xp or office? Can I get copies of XP and Office? I still have the XP sticker with the computer.

  If they don't give you the disks, all you need is a boat anchor. Ask them to give you the disks and product keys. Otherwise, you will need to buy.

• my computer is very slow and the sound is crackling and move icons on their own i have norton security and scanned and it came with a few flaws, but has not yet sorted

  my computer is very slow especially on the startup sound is crackliing and when you watch videos it jumps a little icons often have moved when I start I have norton security and it did an analysis complete and it came with a few things but has not yet sorted

  Hello

  Try to update norton antivirus defination files and run a full system scan in SafeMode (http://support.microsoft.com/kb/315222).

  I hope this helps.