Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

Similar Questions

• Tecra S2 very noisy fan

  I just got my (used to have a S1) S2, but the fan is very noisy. It is noisy it is even annoying me during labor.

  I updated the driver in power saving mode and the power to register the software. But een noise remains.

  The fan also seems to operate continuously at full speed. Especially when loading the batteries upwards again.

  In battery mode
  In battery mode the fan starts, goes to high speed, stops for a short period, starts, going at high speed, stops for a shotr then that implemented site, etc etc this cycle is repeated over and over again. Very annoying.

  Why as with the S1 series where the fan seems to work constantly but that at low speed if you do not hear it.

  Mode full power
  The fan only is in battery mode back regularly at top and goes down to reduce speed also with regular periods. Why not let the fan turns at average speed?
  And as written above when the battery GET fans continue to run at high speed noisy!

  Is there an update of the material of possibel with a fan with less noise? Maybe by any other type of fan.

  I think to go back to my S1 and sell this S2 as it is very boring school work.

  Hello

  As much as I know on some units the fan running normal.
  It is normal that the fan make such a noise.
  I know that it is possible to run 3rd party tools to let the fan run all the time in slow speed.
  I think that you can find in the net.
  In addition, you can try to do the BIOS update if one available on download from Toshiba site.
  You can find them all on

  http://www.toshiba-tro.de/subpage/BIOS.html

  By the way the only way to change some settings of the cooling fan you can find in power management.

  Good luck

  Good bye

• Noise noisy fan on Tecra R850 (HDD vs SDS)

  _Computer_
  * OS *: Windows 7 64-bit
  * Toshiba * Tecra R850
  * Processor *: Core i7 2620M Sandy Bridge
  * AMD HD6450M Grafik *:
  * BIOS *: version 3.90

  Gentlemen.

  in our society, we use the portable Toshiba Tecra for 3 months.
  The fan noise is to us aloud, you always hear the fan sitting a meter away from the computer (no CPU load).

  What helps a little was to change in the
  Control Center Power Options (change Plan settings-> change advanced power-> TOSHIBA Power Saver Settings-> cooling method settings * to * + battery + Optimized).

  But you can still hear the fan turning at 40%-45% when the CPU/system temperature is 40 degrees Celsius.

  On the guy last week also receives a new laptop of Toshiba R850, it is very quiet.
  The difference is that, in his notebook, an SSD is installed (instead of a HARD drive).

  If the SDS make the difference of fan noise? (we do not believe it).

  Maybe someone has had the same experience and has a solution?

  Thanks in advance

  Respect,
  VILSG

  Hi Paulo

  Thanks for the useful comments Paulo. Are there more positive things after replacing HARD drive?
  You may notice faster access to the SSD and performance of mobile in general?
  What is with the consumption of energy when you use your battery Tecra?

• M4: Regulation of the CPU power and fan - tablet is running hot and noisy

  My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

  Is this normal?

  Also my M4 allows on occations to memorize the fan.
  Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
  However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
  Yourself or others behave the same?

  Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
  (http://www.pbus-167.com/)

  East of problems common to the M4 or Tecra series?

  GeirS

  Hello

  If the operating temperature of the machine goes upward, so that the cooling fan turns on.
  Many parts for example produce a lot of heat from the graphics card.
  In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
  If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
  You can believe me :) It's not a fault!

  If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

  Best regards

• Satellite L50 - B fan works even if the CPU load is very low

  I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
  I ordered the video card driver and the system tells methat driver is updated to the latest version.
  I don't know what I can do to change this sad situation.
  Please, please, could you help me solve the problem?
  Thank you very much for your support and understanding.
  I await your quick response.
  Thank you.
  Giovanni Spina

  What CPU temp? Probably overheating?
  Try to replace the thermal interface on the CPU. ;-)

• Noisy fan Portégé Z30-B-117

  Hello

  I have a problem with my new laptop Portege Z30-B-117,
  He really noisy fan, I was forced to use battery saving mode, without which I can't work on this machine.

  The fan speed is absurdly designed.
  There are a lot more speed, even when it does not heat.

  Please make a new bios with the smart fan speed, then it will be the best phone on the market!

  Thanks in advance.

  Sometimes the fan activity would increase where the processor is loaded by some background process.
  I've had the laptop from another manufacturer and the fan speed was high due process that runs in the background. From time to time the process has locked the CPU (up to 80%-90% of CPU usage) and during this time, the speed of the fan was very high.

  I spend a lot of time to learn about this process, and finally, I discovered that my antivirus software (it was Norton) the CPU load. I switched to Avira and Avast and this question doesn't seem anymore.

  However, I guess that the CPU could be occupied as a result of any background process

  By the way: you're right: BIOS contains fan table and this table fan gives indications how to control cooling modules. But the fan activity depends not only on the BIOS as I said above: background as well as the CPU processes affect the speed of the fan.

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Tecra R850 starts when you open the lid

  Hello

  I recently bought a 2nd hand Toshiba Tecra R850.

  Is it normal for the laptop start loading Windows, open the lid?

  I always perform a clean shutdown when I won't be using the laptop - and I always waited to push the button to start.

  So is it normal for the laptop to start when I open the lid? Is there a substitution?

  Thank you
  Brian

  I can answer myself. I went to the BIOS and there is an option for the laptop to start automatically on opening the lid. I put this to disabled.

• TECRA R850 - not found wireless network controller driver

  Hello

  I reinstalled my computer, since then it does not recognize a wireless or network device
  here - after part of the result of the Toshiba Diagnostics tool
  Device Manager indicates that:
  "The drivers for this device are not installed. (Code 28)
  There is no driver selected for the item or a set of device information.
  To find a driver for this device, click Update driver.
  "

  However I can't find the driver, after update of Windows updates, etc.

  Help, please!

  Thank you
  lavver

  Date of 2013/03/15 22:55:35

  [Information on PC]
  Model name TECRA R850
  Part number PT524E-005014BT
  Serial number 4B021792H
  Version of the OS Microsoft Windows 7 Professional 6.1.7600
  Version of the BIOS Version 3.60
  CPU Intel Core i5 - 2410M 2.30 GHz CPU
  Memory8192MB physical RAM
  Hard drive Capacity304, 562, 036, 736 [bytes] 283.646 [GB]
  Hard drive space free Capacity126, 578, 688, 000 [bytes] 117.886 [GB]
  Video version Intel(r) HD Graphics Family = 8.15.10.2291
  Resolution1366 x 768 Pixels screen
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 6.0.1.6271
  Display Audio Intel (r) version = 6.14.0.3074
  Network version Intel Gigabit Network Connection = 12.2.45.0 82579V = E8:9 D MAC address: 87:EA:3 C: 21
  HUAWEI Mobile Connect - 3G version of the network card = 6, 0, 1, 279 MAC address = 00:1E:10:1F:82:A7
  Modem HUAWEI Mobile Connect - 3 G Modem version = 2.0.6.706
  Internet Explorer9.0.8112.16421
  IDE Device Hitachi HTS723232A7A364
  CARPET * A DVD-RAM UJ8A2AS = 1.00 FW version

  [Diagnostics results]
  CPU TEST DOES PASS
  MEMORY TEST DID PASS
  Enhanced Host Controller - 1C2D)
  Enhanced Host Controller - 1 26)

  i.LINK TEST IS NOT FOUND

  Your Tecra a card ATHEROS 802.11 (B/G/N) WB195-HMC w / BT WLAN inside and all the latest drivers you can find on the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Check it out please.

  This is card with BT, then before you install install driver WLAN BT filter. You can find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Satellite A500-1E4 (PSAR9E) - noisy fan stops is never (BIOS version 1.60)

  Hello from the Czech Republic, I have also problem with noisy fan on my new Satellite A500-1E4 (PSAR9E) (i430M, GT330M) on 64-bit Windows 7 over Office Standard - see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46719&start=165&tstart=0.

  Today I have updated the bios to 1.60 (from 1.20) and there has been no change. When the laptop powered to the top of the adapter in all modes the fan is running at 60-70% (sometimes at 90% - my office is perhaps quieter :-(). What laptop power battery in normal fashion fan and high performance race to 60-70% (loud sound) and in the economy mode to 80% (very noisy). It's crazy that in economic mode produce more noise than mode high performance. The CPU temperature is cca. 37-43 C, GPU 48-57. Fans of course never stops and all it's standart office. No intensive work or games. I can't imagine in games.

  Can someone help me please, I'm really helpless. Or this fixes only bios 1.30 and next version not?

  Hey Buddy,

  I think that it of really difficult to say why this happens, but in my opinion you should provide more details about your operating system and drivers.
  Are you running the Toshiba factory settings or you have installed another OS?
  Fan sometimes high activity is due to a different display driver. Have you installed the latest display driver form Toshiba (NOT nvidia)?

  Old BIOS versions, you can get an authorized service provider

• Re: Blue screen on Tecra R850-1HU install Win XP Recovery disk

  Hello

  I have a Tecra R850-1HU that comes with windows 7 pro

  I stopped the media recovery for win xp

  The installation is correctly with xp and when I reboot, I see the logo win xp for 1 second and then screen (0x0000007B) Blue

  I try safemode... nothing works

  I have load mini windows xp from a cd and I see all the files on the hard disk from the cd of recovery if it s installed

  I try to put the bios sata to ahci or compatible with the same problem

  I try many times with the same problem on a different machine with the same problem

  The laptop is returned to Toshiba (they have installed win xp from an original cd of microsoft, so I need activation, and I have to do this on 20 computers laptops and good course that no, the toshiba cd creator app, win the dvd...)

  I contact toshiba, I'm not sure that they understand what I want, I got a new dvd of restoration with the same problem

  Anyone has a solution I would be very happy

  Maybe something to change in the bios but I don't know what?

  Thanks for any help

  In General original Toshiba recovery image is tested and should work properly on certain model of laptop. If there is a problem with recovery original you should clarify this with Toshiba directly.
  As far as I know the BIOS should be set to default settings and nothing should be changed in the BIOS settings when you want to use the recovery image.

  All I can imagine is that there is something wrong in the image itself. In the past, I had a similar problem with old Portege 2000.

  Is done: If you want to use the original image you must clarify this with Toshiba. Toshiba must offer good job recovery image. If you want to use own WXP then you must purchase the license for this. Toshiba has nothing to do with the activation of the OS.
  (> I have to do this on 20 computers, laptops and of course not, the toshiba cd soft > creator, win the dvd...)
  How to understand this?
  You want to buy a recovery disk and install it on 20 laptop computers Tecra absolutely identical?

• Noisy fan on Satellite M50D - A - 10 L

  I bought this Toshiba model recently (2 months) and has started to hear a noise that transmits the sensation of * weight and drag * of the mesma

  Quando check the * "PC Health Monitor" * fan status indicates * 'good' * the strange sound comes * 53% * operating conponente the * "PCHealth Monitor. *

  I would appreciate help in the future, this problem can be identified.

  Thank you very much.

  What exactly do you mean by noisy fan?
  Do you mean the fan activity or perhaps the noise that would be created by the defective cooling module?

  Fan performance is dependent on cell phone usage.
  This means that the cooling module must work more quickly and often in the case where the dissipation of the heat that is created by the GPU and CPU would be longer than simple.

  This is nothing unusual.
  Of course, you can try to edit some Windows power management settings to reduce the CPU performance and to reduce the activity of module cooling.
  But the fact is the higher temperature, the faster the cooling fans

• Satellite U840W-10J - noisy fan and the version of the bios

  Hello

  more top of the machine when you run tempro said new version of bios is available, the link to it is [Satellite U840W BIOS 6, 40 - WIN | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7570 & selSh ortMod = null & language = 13 & selOS = 40 & selType = 4 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 4 & page = 1 & ID = 84640 & DISO =-1 & driverLanguage = 42]

  But when I go to the bios, it says the version of bios is already 6.4 - which is strange since the release of this version of the bios date is 10/07/13. And I don't know that I don't have day of the bios for this version this month :)

  Why does say new version is available?
  Would be - that there's a newer version available, that only that it binds to an evil?
  Even if I download and try to install it, it says that this version of the rom is the same.

  Second question is noisy fan, most of the time is at very high speed (and because of the odd design, when the laptop is open, screen - which becomes really hot fan).
  Since no other laptop I used make these noises, if I really need to update for the bios? But which version?

  Health Monitor shows the 77% fan speed - and I'm not playing games or whatever it is, cpu is always below 10%, I m doing nothing, just a light browsing can turn up to such percentage. What I've noticed, is that it becomes this top still when HARD drive this is - like application installation, download updates, etc... I have download the latest drivers intel to drive HARD, all drivers are more recent. Or is it only noisy due to bad design (fan blowing on screen), and I can use it for heavy work and just have to ignore the noise of the fan?

  Last updated driver to trackpad kills finger double scroll btw, so, maybe you guys could solve the problem too? Since I had to go back to the old version.

  BTW, the machine is only two days old

  I think that you should not be confused on BIOS. Maybe there is a problem with Tempro. This process runs automatically and it is possible that there is a technical problem. If you have latest BIOS is OK so Don t you worry about this. Just continue to use your laptop and don t change anything.

  What about cooling fan? Cooling fan is controlled automatically and according to the temperature CPU cooling fan works more rapid or slower. When you play the games you need more performance, so use leverage plan high performance. For each day of activities, use the balanced power plan. It will reduce the CPU usage, but it will be good enough for low level activities. What you can try is to change the options for the method of cooling. You can find it in the advanced power options. It should reduce fan cooling and portable activity should run quietly.

  Play around with these options.

• Noisy fan - fan starts 15 minutes after turning on the Qosmio F10

  My Qosmio F10 has always had a very noisy fan. The fan noise starts always 15 minutes after turning the PC on and stays of less regardless of what I do on the PC - even if this happens be nothing else!

  I tried to change the battary cooling method optimized in the toshiba saving settings in an attempt to stop the fan coming on but any change of setting seems to have no effect on the fan. I did a search on these forums and found a link to the utility fan - but the link now appears to be dead and someone somewhere else also suggested update but tv pilots who did not work or the other. Anyone have any ideas on how to make this laptop less noisy?

  It's all a bit frustrating saw I bought it to listen to music - and all you hear is the fan when the music calms down!

  Thanks in advance

  Believe me that it is not unusual that the F10 is a laptop with a high GPU and CPU. These regions produce a lot of heat and it must be cooled!

  Please don t compare mobile portable fans with the Qosmio. The Qosmio laptop properties resemble a PC and in my view a desktop PC is much stronger than the F10

• BT stack file TosBTMng.Exe generates 100% of CPU load

  I am also facing the problem that the Toshiba Bluetooth Manager (TosBtMng.exe) very often starts a loop and causes a 100% CPU load.

  This has happened with older versions of the Toshiba Bluetooth stack and the current version (5.1.0.12).

  The affected system is a Tecra S1, BT-Modul and Windows XP SP2.

  BT battery installation went well and the laptop starts succesfull while BT is enabled. I also checked for hidden COM-Ports and other tips in this forum, without success.

  Blocking seems to occur at different times. Sometimes just after are restarted, by clicking on the tray icon of BT with the right button of the mouse. Then the context menu is shown all too the white box, no entries. He can also try to connect to a device already associated. If I kill the process with the Task Manager, I can restart and he continues to work for a while.

  As found in another thread here, I enabled the registration of the API of the Bluetooth Manager and found the following when connecting with the Nokia PC Suite for my mobile phone:

  Call the 00042519 21:55:05 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042520 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  00042521 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] BtCreateCOMM2: InitCOMPort = COM6, CreateCOMPort = COM23
  00042522 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] BlockingSDPCall: send COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000036 (54)
  00042523 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042524 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000028 (40)
  00042525 21:55:05 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  00042526 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] call BtGetLocalInfo()
  00042527 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] BtGetLocalInfo2: entry Paramers / pLocalBtDeviceInfo = 00D9FE8C, plStatus = 00D9FE84
  00042528 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] BlockingSDPCall: send COPYDATASTRUCT / FuncNumber = 00001000 (4096), Size = 00000030 (48)
  00042529 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042530 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00001000 (4096), Size = 0000003F (63)
  00042531 21:56:14 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  00042532 21:56:17 [7208] [TosBtAPI (PCCSTBTP)] call BtGetRemoteDeviceList2()

  A new COM port is created successfully (COM23) and a few seconds later the CPU of TosBtMng load goes up to 100%, but no API calls are made. And if you wait long enough the phone are connected and data can be transferred. However, very slowly.

  Probably because of the high CPU load a next port COM (COM24) will be created some time later and this process is then repeated once again:

  00042740 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042741 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00008007 (32775), Size = 00000041 (65)
  00042742 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  Call the 00042743 21:56:47 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042744 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  00042745 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] BtCreateCOMM2: InitCOMPort = COM6, CreateCOMPort = COM24
  00042746 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] BlockingSDPCall: send COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000036 (54)
  00042747 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] receive WM_COPYDATA / fCloseAPI (BOOL) = 0
  00042748 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] SetReturnBackData: receipt COPYDATASTRUCT / FuncNumber = 00008000 (32768), Size = 00000028 (40)
  00042749 21:56:47 [7208] [TosBtAPI (PCCSTBTP)] call BlockingSDPCall() is returned.
  00042750 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtGetCOMMInfoList2()
  Call the 00042751 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042752 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042753 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042754 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042755 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042756 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042757 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042758 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  Call the 00042759 21:57:52 [7208] (TosBtAPI / PCCSTBTP) BtCreateCOMM()-> BtCreateCOMM2()
  00042760 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtCreateCOMM2()
  00042761 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtGetLocalInfo()
  00042762 21:57:52 [7208] [TosBtAPI (PCCSTBTP)] call BtGetLocalInfo()

  Maybe this allows to locate the origin of the problem CPU load of the Bluetooth Manager.

  Thank you
  Gerhard

  How your com port configuration look like?
  Please compare with the DeviceManager screenshot from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking