Win7 XP mode problem

Similar Questions

• network of virtual xp mode problem

  I use virtual XP mode on a windows 7 Dell.  No problem to see the other computers on the win7 host via a wired network, NS, but when I try to access your network in the virtual XP mode I'm not always able to do.  I get an error that the server is not accessible. "you are not allowed to use this network resource... Contact the administrator of this server to find out if you have access permissions... »

  Thank you!

  David

  Hello

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP. Note:
  Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet
  
  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite C850D-115 / Win7 - key mode special funktion ist does not

  Hello

  key mode special funktion ist does not, but I've tried everything in the Bios and software "Toshiba hardware configuration utility".
  I still need to press on "FN +" to use the special function keys, while active bios mode!»
  Special function mode was never working, I have no more ideas. You...?

  As far as I know using Win7 you must press FN every time when you want to use the FN keys. There is just to Win8 option to change that and use the FN keys without maintaining the FN key.

  > Special function mode was never working...
  Maybe stupid question now but what do I say with special function mode?

• Sleep mode problem

  I have a problem with my mode 'sleep' on my Pavilion laptop 15-n050eb. This takes place since I installed windows 8.1

  When I manually put the pc to sleep I get a screen black still makes the noise but it won't wake up.

  When he falls asleep himself, it's like he stops then when I wake up it upwards (only possible with button / stop) all programs are closed and it takes a lot of time.

  I tried the bios update and drivers and searching online for answers, but they do not seem to solve the problem.

  Hello @Tilia,

  I read your post on how your laptop encounters a problem with wake up from sleep mode, and I'd be happy to help you in this case!

  For more to diagnose this problem, I recommend that you follow the steps described in this document on the sleep and Hibernate in Windows 8 Troubleshooting, issues. This should help to configure your settings to effectively use power management "sleep mode" on your system.

  In addition, you can also restore your laptop default power plans by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Mode problem, freezes or crashes sleep when windows opens again

  Hello

  The problem I have with the pavilion DV4-2145DX , approximately 12 months, using windows 7 is when I close the lid or put in "standby mode", now and then the window opens but the internet does not, nor all the other icons.

  When I go to restart it, the closure does not work so I stop hard.

  When it restarts all works well again.

  When I shut down normally and re start the computer no problem at that time.

  Any ideas please.

  Paul

  DavidPK wrote:
  

  Hi Paul,.

  This can sometimes be the result of hybrid sleep is enabled.  To check if this is the case, follow the guide on the link below to disable hybrid sleep.

  Disable hybrid sleep

  Best wishes

  DP - K

  Thanks Dp - K you have solved the problem

  Paul

• Win7 SP1 installation problems - Code 80004005

  I am trying to install the SP1 of Win7 tonight, and it failed with 'Code 80004005'. I looked this error, and it seems fairly generic. I followed the convenience store of SP1 and still not get SP1 to install. Any suggestions? Thanks in advance.

  Hi NomadBob, another thing you can try is to start the computer in a clean condition and then try to install the update. You said that you have downloaded the entire file. Unplug all unnecessary equipment (external drives etc.) which could interfere with the process of update and update offline.

  In this way, is it at least will eliminate interference 3 third-party product.

  Be patient, I hope a cure can be found in the future near or at least a workaround solution.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Speedlite 580EX II E - TTL mode problem

  Hello

  My speedlite has recently started to produce photos that are underexposed in E - TTL mode. Compared to the previous pictures, the difference is of about 2/3 - 1 full stop.

  I have done a number of tests using my EOS 40 d and an EF 24-105 f4/L IS USM lens.

  I used the fully charged batteries in the camera and speedlite (two alkaline batteries or NiMH in flash). I checked the exposure compensation and flash exposure compensation settings as well as all other parameters of the menu camera and custom in the speedlite and camera functions. Everything is in order and there is no conflict between the camera and the speedlite.

  I shoot in RAW and as a test, I took a number of pictures in the manual, Tv and Av modes, both without flash and using the flash on the camera. All were well exposed (with no exposure or flash exposure compensation).

  I tried recycling the speedlite to full power several times - time 5 seconds. Thus, it seems that the batteries were working well.

  I then carried out a number of tests in the manual, Av and Tv modes at various shutter opening and ISO settings to compare flash shipped with the speedlite E - TTL mode performance. Each of the photos taken with the built-in flash has been well exposed with a good histogram. Each comparison with the speedlite photo is underexposed, with a bad histogram and reduced file size. With some tests, it was necessary to set the exposure compensation to + 2/3 to + 1 stop flash to achieve results globally comparable to the onboard flash.

  However, this workaround solution produce satisfactory results for the subject distances over 20 feet, even at high ISO and long shutter speeds. The output of the speeedlite was much too low. These tests were done inside.

  Then, I made tests with the speedlite in manual mode with all of the production in full. A range of shutter speeds, apertures and ISO settings photos were completely blown out. The same result was obtained with the speedlite in sync and manual high speed selected if the shutter speed is equal to or less than 1/250 second (max height available for the on-board flash shutter speed).

  As a solution, I put the manual speedlite with sync high speed and set faster than 1/250 second shutter speeds and

  tried the exhibitions at different distances from the object. In General, the sync high-speed kicks. I have not yet checked performance to subject more than 30 feet, but a comprehensive exhibition was obtained in all tests to date, (mostly better with flash exposure compensation of-1/3). However, according to the ambient light auto focus was sometimes impossible.

  These tests, it seems that the device works well, the speedlite is capable of generating a full release and in manual/high-sync mode, it will produce a correct exposure with high shutter settings.

  While the two workaround solutions - E - TTL mode with timing of compensation and flash exposure manual/high speed - work, some experiments are required and both have their drawbacks. There are moments where I would like to make with the speedlite in manual, but for the most part, I was pleased with the results in E - TTL mode and I want to be able to restore my speedlite complete state.

  I wonder if anyone can shed light on fault (sensor/transistor?) and repair.

  I'm sorry to have provided a lot of details, but I wanted to avoid unnecessary questions or solutions that I've tried. Any assistance from members who are aware of this problem would be greatly appreciated.

  It is not a fault. It seems that if the flash does not work correctly.

  You realize, not you, the ETTL flash works differently in mode to manual exposure, it does in the automatic exposure modes?

  When you have the ETTL flash game and the camera to Tv or Av or P, the camera will expose by ambient light as if the flash is not there, and the flash is treated as a FILL light. The flash output is reduced by something like 1.5 or 1.7 stops full power, unless you overrided with + or - Flash Exposure Compensation.

  When you have the flash in ETTL and Manual, the flash is FULL and processed by the camera, as if it were the only light source. The ambient light is ignored (but according to the selected parameters can still be a factor in your images). Once more, you can substitute with FEC, if you wish.

  If I read your description, you see the difference between manual/FULL flash and AE/TTL. As long as you keep in mind these, you can configure the camera and flash in ETTL mode easily to many different situations.

  You will notice that the flash often recycle much faster when it acts as a FILLER, because it is drawn to the decline in production. I often use the fill outdoors during the day and can get two or three 'pop' quick lightning before it slows down for recycling.

  If you want the 580EX II to recycle faster, use of quality instead of alkaline batteries rechargeable batteries. For faster recycling, a CP - E4 battery pack is a nice addition. He added 8 AA plus size batteries that flash can appeal.

  I never use the built-in flashes, so I don't really know how they compare.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• Video Mode problems XP ' Safe Mode'

  After you install a new motherboard, I have a problem with Safe Mode.

  The PC has 2 hard drives, one with XP Home, & the other with XP Pro. One can be selected at boot time.

  I have no problem with XP Home, so I know that the material is not at fault.

  With XP Pro, I can boot into normal mode, without any issue.

  However, if I try to boot XP Pro Mode safe mode, the monitor advises "Out of Range". On another monitor, the 'frequencies' appear as 35.5 H & 86.8V. These are not unusual.

  Does anyone know how I can find/replace the video settings of the SafeMode in the registry or elsewhere? I looked at 'DefaultSettings.XResolution', etc. and can see several occurrences of the present, which seem legal. I've tried to set a "DefaultSettings.VRefresh" which had a value of 1, but this did not help.

  I have also tried to change the resolution of the display properties/settings/advanced / "list all modes", but that did not always help.

  I am pretty well confused.

  The only thing that occurs to me is the account that you have just installed a new motherboard is that perhaps you need to install or reinstall the drivers for your new mobo chipset.  See this thread:ttp://www.subwolf.org/v2/articles.php?article=1 h

  As far as I KNOW, the pilot of SafeMode (vgasave) depends on vga.dll and vga.sys.  My understanding is if one of these files is missing or corrupted, the system will BSOD rather than running with screwy resolutions.  Windows file protection should have replaced these files, if something had happened to them, but you can try to expand the vga.sy_ and C:\Windows\servicepackfiles\i386 vga.dl_ or a Windows install CD and replace files in C:\windows\system32\drivers (vga.sys - vga.dll is in windows\system32).  I don't have much hope that this will help.

  You can also try going to the menu Advanced Startup Options (F8 or Mode menu aka safe) and selecting "Enable VGA mode" to see what is happening.  "VGA" mode, the driver installed for the video card should be used instead of vga.sys.  http://support.Microsoft.com/kb/315222 if the mode 640 x 480 video card works for your display, more than one finger pointing at vga.sys.

• Help! Iconia A200 sleep mode problem

  My a200 iconia don't wake up once it is in mode 'sleep' from updating the system a few days ago. I have to plug charger and time keep the button twice to restart. I tried to reset the data, but it does not solve the problem. Can anyone help?

  try using SoftLocker. It is the only solution that I found.

• XP won't start, or go into safe mode. problem w / file system.

  I have XP SP3, and while I was using it today, just to stop randomly and attempted to restart. I had made no changes to any system files or installed anything, etc...

  When he tried to restart, it froze to the logo screen and would not make progress, regardless of how much time was left for her. I tried to start in safe mode, and the usual list of system files and drivers ran to the bottom of the screen, stopping at Mup.sys it froze it there several times. I tried to start the Windows Recovery Console, nothing helps. I could not find my xp cd to try to fix him.

  I replaced my HARD drive died with a new one and now have XP SP3 on a single partition and Ubuntu on the other. I'll also do my data retrieved by Seagate. This problem is now resolved.

• -vpn - XP mode problem

  Hello

  I have a problem with establishing a VPN connection to my company. I changed the network card in XP of NAT to my internal adapter of W7 (Marvell Yukon...). Map of XP mode cannot get valid IP, only APIPA address.

  My W7 Marvell Yukon network card gets IP from the DHCP server of my Internet access by cable modem provider.

  Any ideas?

  Sincerely,

  Stefan

  Hello

  You need a router for such a link, since the wise network, you have two independent computers.

  To work both computers (Win 7 and XP-Mode) must be live on the network, if you connect directly to a Modem you have no network.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• ENDURANCE (?) mode problem

  Good evening.
  You see, I have this situation past that I don't know if its normal behavior or it is a problem. Allow me to explain.

  About 3 weeks (when I bought my z3c) battery level widget (built in) told me that I had about 4 days of battery charge on stamina mode when the battery was at 100% charge. When he was at 14%, I decided to load, but when he reached 100% again, the widget then told me that I had only 24 hours of battery charge. At that time maybe there behavior was normal, given that all the software that I installed (Launcher, screen lock, etc.) was huge amounts of battery drain. So I uninstalled all my software (essentially leaving the phone in a factory State) and still the widget told me that I had only 24 hours to charge the battery to 100%. So I decided to do a complete factory reset and this is when the phone was 100% the widget told me I had about 4 days of battery charge.

  Now in this cycle, I decide to install all my software again (although always at 100% and connected to the charger) beign great attention to the what applications could be the culprits of last time behavior (I decided to leave out launchers and lockscreens). Once I finished (still at 100%), the battery widget still told me I had 4 days of battery, so I concluded that the launcher and the lockscreen was playing with battery levels. So, I unplugged it and start using it until it reaches 14 percent once again. I load it again at 100% to see the widget tells me I had about 24 hours to charge the battery (Yes, the same problem that I had before). I might mention here that in this cycle, mobile data, location services and 4g where listening to the coast.

  Frustrated, like there is no tomorrow, I decide to do a last experiment and try to understand what that would that be the problem. New, I reset my phone to a factory State, and I leave without apps, only those built in. And yet once, at 100% the widget told me I had 4 days of charge of the battery and when I re - load to 100%, the widget tells me that I have 24 hours of battery.

  Can someone tell me whats going on? What I'm missing here? What could be the problem? How should I do?
  Thank you very much for your time.

  The widget is an estimate and is based on your consumption on all about 2 or 3 days from the same amount of days before - so in the present, you are a user of light so the widget would not say what he gives before days however to say 2 days time now what you were doing now will be considered as your time now ,

  Confusion of sounds

• Mobile data in stamina mode problem

  Hi all

  Mobile data continue to work, when I chose in endurance mode. It works even if extended stanby was chosen. mobile data won't stay out of this mode. How can I solve this problem?

  Not: Active applications in stanby is empty.

  My problem has been resolved: mobile data was closed in 15 minutes after I closed keylock

  Stamina mode will kick after 15 minutes. Mobile data remain even after that time? It should allow when you wake up to the device.

• Pavilion g6t-2000 black screen &amp; Sleep Mode problem

  Features of the laptop:
  Name: HP Pavilion g6t-2000 CTO Notebook

  CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

  GPU: AMD Radeon HD m 7670

  OS: Windows 7 64-bit

  So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

  Things I've tired:

  • Removed the beta driver and the GPU of HP drivers installed via the HP website
  • Update BIOS f.25 (latest driver)
  • Changed the power of options such as checking to see if hybrid sleep is turned off
  • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
  • Running sfc/scannow

  On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

  I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

  I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

• M125rnw: HP M125rnw sleep mode problem

  Hello

  Sorry for my English.

  I recently bought a MFP HP LaserJet Pro M125rnw.

  I installed the printer using the ethernet connection.

  I can't solve the problem with the standby printer.

  After a long stay in the mode 'sleep', the printer refused to print:

  1. I can't print from a PC with Windows 7
  2. I can't print from a PC with Ubuntu 14.10
  3. I can print reports using the WEB interface
  4. Turning to the wide on/off the printer solves the problem for a few hours

  Is this a problem with the printer hardware?

  When he goes to sleep, go to the menu of the printer and see if you can push the buttons to get the "sleep mode".  If you can, then the issue is probably with the driver you are using.  If you can't wake up the printer with the button, then you have a hardware problem and the trainer is probably defective.