WIN8 for Win7

Similar Questions

• Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

  I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
  PCI\VEN_104C & DEV_8241 & CC_0C0330
  PCI\VEN_104C & DEV_8241 & CC_0C03

  Thanks in advance to anyone who can help

  Hello:

  This driver should work...

  Texas Instruments USB Controller Driver

  File name: sp70786.exe

• Portege Z930 - a few questions after decommissioning of Win8 for Win7

  Hello
  I recently bought Z930 PT234E with Win8 pre-installed. Due to the policy of the company, I needed this downgrade to Win7 Pro 32-Bit (deleted all partitions and creates a partition must usually be made). I downloaded all the drivers for the OS and installed. And it all started after that;

  1. I'm trying to install TOSHIBA Smart Client Manager but returns with warning "+ before starting the implementation of TOSHIBA Smart Client Manager Client, copy an action for TOSHIBA Smart Client Manager Server header file to the installation folder. +"and I only have the file and the installation will fail. * Where can I get this file for a successful installation? *

  2. you have + hwsetup + software preinstalled on Win8 but I couldn't find this sw / driver, even for Win8 to download Toshiba pages * where can I get this sw because it gives the possibility to configure the BIOS without waiting for start? *

  3. I see that the battery is + opportunity + while I left my camera on hibernation. I have to unplug it from the power supply after that 100% charged and Hibernate, it. But after a few hours, when I turn it on, I see that it is 91%! I susbect it's because of ' + sleep and fresh + "is enabled from the BIOS, but I need to wait for the next boot. * Any comment? *

  4-if I buy Toshiba online recovery support, this will help me to install Win8 as first boot and create the deleted partitions as in "+ * factory State * +". In other wprds, this recovery media will set my z930 to the State from the factory with the OS and partitions. + OK, I guess this media is a DVD and I know that I need to create a USB bootable for this media... No worries :) +.

  Really thanks for reading and the comments / answers :)

  > 1 - I try to install TOSHIBA Smart Client Manager but returns with warning "before starting the implementation of TOSHIBA Smart Client Manager Client, copy an action for TOSHIBA Smart Client Manager Server header file to the folder of installation." and I only have the file and the installation will fail. Where can I have this file for a successful installation?

  This file is not known to me and usually something like that should not appear if install you the software in the correct order.
  Before you start to install the Toshiba software you need to install the Toshiba value added for Windows 7 package!

  Only if this PPV was installed and restarted laptop, you can follow with other tools.

  > 2 - you have hwsetup software preinstalled on Win8, but I couldn't find this sw / even Win8 to the download pages where Toshiba can get this sw fly because it gives the possibility to configure the BIOS without waiting for the start?

  Driver package system that is available to win 8 is NOT available for Win 7.
  Instead of system driver you have installed to VAP!

  > 3 - I see that the battery is used while I left my camera on Hibernate. I have to unplug it from the power supply after that 100% charged and Hibernate, it. But after a few hours, when I turn it on, I see that it is 91%! I susbect because of the option "sleep fresh" is enabled from the BIOS, but I need to wait for the next boot. Any comments?

  Any comments? Option Charge & sleep, but also other options like the Wake Up LAN or keyboard may discharge the battery. So in case you n t want that, disable it in the BIOS

  > 4 - if I buy Toshiba online recovery support, this will help me to install Win8 as first boot and create the partitions deleted as in "factory condition". In other wprds, this recovery media will set my z930 to the State from the factory with the OS and partitions. OK, I guess this media is a DVD and I know that I need to create a USB bootable for this media... No worries.

  Yes

• Satellite L875D: USB 3.0 ports do not work after decommissioning of Win8 for Win7

  Hello

  I got my OS of Win8 OEM for Win 7 Home Premium because Win8 is just not for me... Its a legal version of Win7 with a product key, storebought...

  The laptop is a Satellite L875D-10N, which I bought in September 13.

  Installation went well, except that 2 3 ports USB 3.0 no longer works.
  I can stil fresh my phone or other devices, but the laptop is not "see". Also, USB drives and other storage devices are not recognized.

  In the Device Manager the ar two ports under "other devices" and no driver is installed for them.
  I tried in different ways to find and install a driver, but it never works.

  Can someone help me with this? I would be very much greatfull!

  Kind regards

  Wilbert
  Amsterdam, Netherlands

  > In Device Manager, the two ports are listed in the "other devices" section and no driver is installed for them.

  Indeed the USB issue seems to be related to the missing drivers.

  You must install this driver USB 3.0:
  [Driver USB AMD v 2.0.7.176 Windows 7 - 64 bit: http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct 7534 = & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 87792 & OSI D = 30 & driverLanguage = 42]

  In addition, you will need to make sure that this chipset driver has been installed too.
  The laptop supports the graphics chip ATI and AMD chipset. The chipset driver is the driver of ATI graphics card and this is why you must make sure that this driver would be installed too.

• 2000-2c29W HP: downgrade HP 2000-2c29W of Win8 for Win7

  I know I need to reformat the hard drive before installing Win7.  What else do I need to know for an installation without problem on this model?

  Thank you.

  It seems that the disc while it is formatted in NTFS is still in GPT and MBR format.

  Have you also convert the disk to GPT on the MBR?

  You can use this free bootable tool that is supposed to be able to convert GPT on the MBR disks then you can format the MBR disk with the NTFS file system.

  http://www.partitionwizard.com/FeatureList.html

• Help: Decommissioning of Win8 for Win7

  I have a new HP Pavilion p6 - 2316 s office running 64-bit Windows 8

  I have 2 things that are not win 8 compadable, and I bought the DVD of Windows 7 64-bit.

  I went and turned off Secure Boot. I also changed the boot sequence so that it starts from the DVD.

  He began to collect files for Windows 7 for a while, and then he went to the process of starting Windows with the logo of Win

  but it stops there. Tried to do again but stopped in the same place. The Logo of Win seems distorted.

  Anyway, I don't know what I'm doing wrong or if there is something else to complete it.

  Thanks in advance for any info.

  Joey

  Oops, I noticed that I turned Legacy support above Secure Boot. I enabled Legacy Support tried. Everything worked well. I am trying to install Win 7.

  Sorry for the wasted post.

• W530 Install Win8 Downgrade for Win7

  Hi all

  I just got a new W530 last month, and I wanted to downgrade Win8 to win7. However, when I was trying to intall

  the windows7, there is an error message:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style

  Then, I tried to use the tool of Gparted to remove all partitions on the disk hard and then created two new

  partitions. However, when I tried to install windows7, it has the same error message. Those who know how

  to resolve this problem, pls let me know. Thanks in advance.

  Alex

  I thought I already solved this problem. My solution is to use Gparted again to delete all partitions, and then quit.
  Then reinstall windows7, windows7 installation process, I created two new partitions, and it worked. I hope this help someone who has the same problem.

• Drivers HP Pavilion g6-2236 for WIN7

  Hello

  I shot my g6-2236 PAvillion of WIN8.1 for WIN7 Ultimate.

  Some drivers are missing and currently is the situation:

  

  And here are the IDS of devices driver missing:

  

  

  

  Where can I find the right drivers?

  Thanks in advance for your help.

  Angelo

  Hi, Angelo:

  Install the AMD chipset driver and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Pavilion g7 - 2354so and missing chipset Intel HM76 for win7 x 64

  I replaced the Malv. WIN8 with win7 x 64 and now System Manager does not recognize devices usb, ethernet, VGA and PCI.

  I think the problem is that I can't find a driver for the Intel HM76 Express chipset.

  I guess HP didn't chipset for win7 drivers?

  Is there any solution for this?

  Hello:

  According to the product specifications for your PC, on the link below, it has an AMD processor.

  The chipset spec on the support and driver page is incorrect, or the processor information are incorrect.

  http://support.HP.com/us-en/document/c03617652

  I'll bet that the chipset info is incorrect and based on this hypothesis, below are the links to the W7 x 64 drivers you need.

  First install the AMD chipset driver and restart. First file listed on the Web page.

  This will install the smbus and usb 3.0 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then the rest of the W7 x 64 drivers and software can be obtained from the g7z-2100 on the link below.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619#n222

• Drivers for Pavilion 15-b054st for Win7

  Hello

  I know know that HP does not have drivers for win7 for Pavilion 15-b054st (win8 was preinstalled on it), but in any case, I'm looking for drivers for Win7... I have already installed everything except a Unkownd USB device. Windows cannot find the driver automatically. can you recommend anything to install the driver manually or at least to tell the creator of devices possible?

  Win7 recognizes as being universal USB Controller

  as a result, I don't have that one UBS port works well (on the left) and both of them don't work at all (on the right side).

  with sincere friendships.

  Egor

  Hello:

  Here is the link for the usb driver 3, you must...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• Downgraded Win8 to Win7

  Hello!

  I buy HP pavilion 17-e004er laptop PC with Win8 pre-installed, but I don't like that operating system, office looks very ugly and impractical. Most of the programs and games that I use today do not work with this operating system, which allows buying a laptop is almost useless. When I reinstalled for Win7 I can't find drivers Ethernet Controller PCI device, SM Bus, video controller controller, Bluetooth, USB Universal Serial Bus Controller controller.

  Can you help me?

  Thank you!

  Hello:

  SMBUS controller. This must be installed first. Then restart.

  First install the chipset AMC driver and restart. You want the first file on the Web page.

  Who will install the smbus controller.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  To install the video contoller - PCI\VEN_1002 & DEV_6660, click on the video controller with this hardware ID, repeat the process of driver installation manual that I pointed out above and in the list of graphics cards, select the AMD Radeon HD series 8600 M graphics card list.

  PCI\VEN_10EC & DEV_8136: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  PCI\VEN_1814 & DEV_3290:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118589_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_1814 & DEV_3298:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118601_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_10EC & DEV_5229:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_1022 & DEV_7814:

  Download and install these two files:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

• Compaq CQ58 - 299EV model of updated video card and driver for win7 64 bit and ram upgrade

  Hello

  Since I was my compaq laptop (about a year), it was windows 7 64 bit operating system inside, even if the manual was for windows 8. So, when I looked up initially for up-to-date drivers I couldn't find support for win8, but I chose not to because I saw tons of compatibility issues with this model of laptop. Well I don't want to update soon, so I would like to know what are the latest drivers I can find for my model for win7 64-bit.

  So, what model of video card has it built in (it just says: "Intel(r) HD Graphics"), so I can find the right drivers for it?
  Also can I put my ram? There are now 2 GB.

  Thanks in advance.

  Since it is a Celeron processor it comes:

  Intel HD Graphics (on models with Intel Pentium or Celeron processor; supports DirectX 10)

  They don't give him a number. The processor is based on the Sandy Bridge architecture, so any driver for the video card HD 3000 series will work.

  Latest version of the Intel driver

  This can take up to 8 GB (2 x 4 GB) DDR3-1333 SO-DIMM, like this:

  http://www.Amazon.com/Samsung-PC3-10600-1333MHz-so-DIMM-upgrade/DP/B003XN3BZC/ref=sr_1_1?ie=UTF8&QID=1413330996&SR=8-1&keywords=DDR3-1333+so-DIMM

  Here is the Manual:

  Manual

  See page 45 for the upgrade procedure.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• display G6-2306el (ATI 7670 M) for Win7 driver

  I spent hours trying to solve the following this problem without success.

  I bought a 2306el g6 and decided to downgrade its win8 to win7 OS. Thanks to your service, I found all the missing drivers... except the graphics card!

  The laptop get ATI Radeon 7670 m (1 GB ram). I tried every package offers in this forum, expecially those provided here.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/drivers-problem-w...

  Unfortunately, no one works for me. It's quite strange because the graphics card model is exactly my model with my hardware ID.

  Attached are all together, I've tried.

  

  ... Do you have another suggestion?

  Thanks in advance

  You are the very welcome.

  What I would do, is to reinstall W7 from scratch and using only the drivers for the laptop on the link I posted.

  Since you have tried other video drivers, probably you have "polluted" bad installation, that it cannot be corrected.

  Then after W7 install, install the following drivers in this order and restart after each installation:

  Chipset installation utility

  AMD 7670 M graphics driver

  Audio

  Wired network.

  Then, you can install any drivers you want later.

• HP pavilion 038sa-15 driwers for win7

  Hello eweryone can someone help me find drivers for my laptop but for win7, I reale hate win8 and does not usually use it. So installed win 7 but no network device is found, tried to install other drivers drank without success.

  I know that this laptop comes with win8 and just win 8 drivers but if have some ideas where I could get the drivers that will meet this card plese let me know
  : integrated 10/100base-t ethernet lan

  Thank you very much

  HP pavilion AMD 15-038sa A1

  Thank you!

  Hello:

  See if these drivers work for you.

  First of all, download and install the driver for chipset amd from the link below. You want the first driver on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then see if the driver AMD beta from the link below works for you...

  http://support.AMD.com/en-us/download/mobile?OS=Windows 7-64

  Audio: Accept the contract, download and install the file second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Ethernet: Download and install the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  USB 3.0: You need both of these drivers...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Card reader:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Webcam:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125247_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3D driveguard:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4132&product=6629123&sw_lang=

  I don't know what model of laptop wireless card is in the Device Manager, click the device listed as a network controller! and view the ID of the hardware for it.

  Use this guide for an example of how to find the ID of the hardware for a device.

  http://www.WikiHow.com/find-hardware-ID