Window pop-up with a message to the user using ADF and Java bean

Similar Questions

• Was not asking for window pop up with error message

  As for the other Unasked for Popup window question, my error message is a little different. (I tried, also, to solve the problem using the suggestions appear on the Web site.) I also get the rectangular black box with the title of "tasking.exe", with the following message:

  The message is this: "Windows cannot find 'C:\Users\my name\AppData\Local\browser extensions\client.exe'.

  I would appreciate any help with this!

  I also tried the AutoRun and did remove all the items highlighted yellow - but I still get this message.

  Thank you!

  Run the tool Process Explorer (Procexp) from Sysinternals, it's a bit like the Task Manager.

  When the screen unwanted opens again, open Procexp, click target and select window/box you concern. Procexp will then highlight the line which is the process the institution has this pop-up - this should give a better idea of what is causing this problem.

  

• Whenever I started my PC a window pop up with the massege to allow execution of "WDBtnMgr.exePublisher".

  Every time I started my PC a window pop up with the massege allow execution of "WDBtnMgr.exePublisher"... allow or cancell are option 2 for a year I have to work and I just press Cancel I didn't see any restraint on the performance of the PC.

  Hello

  ·         What operating system is installed on the computer?

  ·         Did you make any changes before the show?

  Follow the methods and check them off below if it helps:

  Step 1: Start in safe mode and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in safe mode, then I suggest you put the computer in a clean boot and check if that helps:

  http://support.Microsoft.com/kb/929135

  Note: Reset the computer to start as usual by following step 7 from the link above.

  Step 3:

  Run the Microsoft safety scanner to make sure that the computer is free from virus infection:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• In Windows Mail, journal on security keeps popping up asking me to check the user name and password.

  Original title: "Windows Security".

  I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today.  I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP.  I can't front/send by email but receive in Windows mail.

  Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',

  So wait a while and try again later.  You can also go to their website and log on there to see if it works.

  Also try to compact and repair the database (see www.oehelp.com/WMUtil/)

  Steve

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.

• Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  I got this program for years.  Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.

  Hi lindat7439924,

  There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/

  Kind regards

  Meenakshi

• When I update my Windows XP, I get a message that the 2 updates cannot be updated. Here is the error message

  When I put update of windows xp I receive message 2 updates cannot been done here is what I get = - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
  -Other hardware - Microsoft HID Non - User Input data filter (KB 911895) CAN
  you help me? Thanks when I update my Windows XP, I get a message that the 2 updates cannot be updated.  Here is the Microsoft - other hardware - error message HID Non-User Input data filter (KB 911895)
  Microsoft - other hardware - HID Non-User Input data filter (KB 911895) can you please help me
  André

  Hi MrPeanut,

  Welcome to the Microsoft answers site.

  This problem can occur because the device sends data of strength of signal for Windows. These data can be interpreted as input device real, such as the movement of the mouse, button activity or strikes. Therefore, this transmission can prevent Windows mode 'sleep'. Windows must enter "sleep" mode to activate the screen saver.

  I suggest that you update the drivers for all devices on the computer entry. You can update the drivers from Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work-good

  If the problem persists, then I suggest that you uninstall the update from Add/Remove programs in the control panel.

  Now, download you the link that resets the update reset Windows components from the following link: How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Now start you the Windows updates and check.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I would like to install my Acrobat 8 Standard on a new laptop (Windows 10) I bought to replace my desktop model existing (Vista). In the process of establishing a window pops up saying that necessary files "the file"Adobe PDF.dII"on Windows Vista is requi

  I would like to install my Acrobat 8 Standard on a new laptop (Windows 10) I bought to replace my desktop model existing (Vista). In the process of establishing a window pops up saying that necessary files "the file"Adobe PDF.dII"on Windows Vista is required. Type the path where the file is located, and then click OK". What should I do to work around this problem. According to the agreement of the user, I should be able to install the program on a second computer.

  If you are using an installation disc, copy the contents of the drive in a desktop folder and install from this directory.

• Display a message to the user w / result of data

  Howdy,

  First off it is a mission of the College work and it's especially complete; seeking advice and the experience here.  The mission is to create a calculator with many functions for each method of arithmetic.  It was easy enough, but the next step is to display a message to the user after each calculation.  For example, if the problem was 4 + 2, the message must be "the result of the addition is: 6. the creation of the part of the message by using the Msg to display the user-defined function is simple, but it is not exactly struck home.  I want to create a message that contains the result of the problem (for example 6).  As it is now I can't do that with the function of Msg, or if it is possible I can not quite understand.  I want to have a separate message for each function, but I don't know if I can incorporate the response into the message.  It's the underlying objective; How to integrate the response in a message dialog box to the user? If it is possible what should I watch?

  The VI himself is quite simple; case of structure for each arithmetic function and a certain time for execution loop.  X and there are entries and a drop-down list to select a structure if necessary. I've attached a screen below.

  Thank you

  

  THA

  You can use the Message to display to the user to view any string to the user. If the key is to use the palette of the chain to manipulate strings to get the error message.

  A subpalette of the palette of the chain is the range of number/String Conversion. This can help you get your (6) value into a string format and then you can concatenate that string however wished with the message.

  With the pop-up windows, you must make sure that you're not trigger this popup with every single loop, so make sure you put a case around the pop-up structure and place the logic in there to make it work only the case of popup when the value changes.

• Cannot open my other user accounts... Download the message, that the user profile service service has no logon. cvannot loaded user profile

  Having only one administrator user account. All my other user accounts will get the above message. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• My Toshiba Windows Vista says that failed to load the user profile when I try to log in.

  He said also the user profile service service has no logon. I have not changed my password.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Husband can no longer connect computer. Message reads ' the user profile service has no logon. User profile cannot be loaded"

  How can I solve this problem? I have Windows Vista.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Is that the compress/decompresss utility file supported by all types of window OS? or for some region the user install it?

  Hi all:

  Is the Compress/decompress utility file supported by all types of Windows OS (XP, VISTA, Windows 7)? or for some region the user install it?

  Any link from the website of Microsoft?

  I managed to get the guide from the Microsoft web site, but just a guide without a show of declaration of default installation during installation of the operating system.

  Window XP:

  http://support.Microsoft.com/kb/306531

  Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/compress-and-uncompress-files-ZIP-files

  Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files

  Thank you.
  Coulombe

  Hello

  Compress and decompress are not a separate tool/utility to download and install in the computer. They have functions that come with these 3 operating systems. These features are available in Windows XP/Vista/7 from across operating systems.

  However, you can also use your favorite search engine for non-Microsoft applications to compress and extract files such as Winzip and Winrar.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful.

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner