Window previews are not more Live

Similar Questions

• What I do when I get this message: there is not enough space left to the location of the cache... Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change

  I don't know what that means:

  "There is not enough disk space to left to the location of the cache...  Thumbnails and previews are not generated or updated in cache on the disk.  Please leave bridge and add more disk space on the volume of the cache or change the location of the cache in the Cache preferences.  Then restart Bridge. »

  I deleted a whole bunch of photoshoots I had on my desktop, but how to make more space here?

  Erica

  Hi Ericacole

  What version of the bridge are you using and what is your OS?

  Please how much is left in your main hard drive.

  By default, the bridge cache is located at: -.

  C:\Users\Yourname\AppData\Roaming\Adobe\Bridge CC\Cache (AppData is a hidden folder)

  Note that cache bridge could be very large depending on your use of the product.

  Please see Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS

  Concerning

  Assani

• Desktop SMS and Windows Mail are not working together

  Hello

  thought I'd post here here as having a few issues with my Windows Mail but my desktop computer suffers the same problems and on a Vista forum where I posted my problem a few very useful told me who to try to solve the problems.

  One of them suddenly realized I had said my laptop is a Toshiba, and apparently the Desktop SMS and Windows Mail are not working together so that the person suggested unless I use it to uninstall apparently amongst the technically trained its known that these two programs do not like each other and explain why my office is not the problem but the laptop don't.

  After you have reset the Touch of Windows Mail (tutorial on a site http://www.vistax64.com/tutorials/ vista) wood don't be put off by vistax64 as site 32 and 64 and followed great reset Windows Mail from Brink (do not restore all mail) then uninstalled Desktop SMS and touch of the drink no more mail questions that gave me problems almost every day with marking than reading/sending project messages.

  So had to click forward then remove those bits and complete the email to send and touch wood since doing these two things as soon as send an email to the box shipment or project to obtain the number of emails in parentheses, whereas before it wouldn't happen unless I closed the program and then reopened.

  Hoping that these solutions have solved my problem and wanted to share it with someone else who wants to read this thread and you recommend Vista 64 because they are all very useful there and speak in non-technical terms for those of us not technically trained.

  Debbie

  Thanks for this piece of information. Should be useful for some of us.

• In the Menu background, recently closed recently closed tabs and Windows Options are not enabled

  Recently closed recently closed tabs and Windows Options are not enabled.
  I tried to reinstall and upgrade to firefox v4 and nothing has changed.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

• Buttons on the Panel are not more enlightened

  Buttons on the Panel are not more enlightened. How can I solve this?

  Enter the parameters of the BIOS (F2 at startup) and under Advanced BIOS options you will find LED illumination. Set it on, save the BIOS settings and restart your laptop.

  Does that help?

• When you try to download Silverlight, I get a message that says that Windows Installer are not available.

  Windows Installer is not correctly installed

  When you try to download Silverlight, I get a message that says that Windows Installer are not available.  Windows install is not properly installed.

  How can I fix it?

  I am running XP Home Edition.

  Thank you

  Hello

  1. you try to directly run the silverlight program without saving it on the computer?

  Run the following article fixit tool and check.

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  You must download and install the version of Acrobat Mac.

• Discs Blu - Ray are not more recognized in Windows 7

  Hello

  I have 2 laptops with internal blu - ray, who never stopped recognizing Blu - Ray discs. I live in the United Kingdom

  A Blu - Ray drive is an Optiarc, the other a LG - PC with the Optiarc has Win 7 64 bit Ultimate and the brand-new PC with the LG drive has Win 7 64-bit Home Premium edition. Both drives are listed in the compatibility list - and were shipped preloaded with Win7.

  They both played Blu - Ray discs in the past, but it is even more recognize them in the drive.

  I ran Diagnostics from CD/DVD drive suggested in other similar topics, but the reader does not recognize the disks, it cannot solve the problem.

  I uninstalled and reinstalled several times readers in Device Manager.

  I also tried the fix involving the upper and lower filter removal in a registry key, also without success.

  I tried to change AHCPI to AHT in my bios - my bios has no AHT, just AHCPI and IDE

  I've installed, uninstalled, and reinstalled several different Blu - Ray software Acer Arcade, PowerDVD, TMT MediaTheatre Total, Slysoft AnyDVD HD and others. None no longer works.

  I even restored the two default factory machines and reloaded drivers manufacturer - no luck.

  The manufacturer, Acer, has even replaced one of the machines - when he arrived, he played all my blu - ray discs. After only a couple of windows update, it doesn't even recognize the discs.

  As you can imagine, I am at a loss on how to fix it.

  I noticed that the driver is installed when the hardware is detected is a Microsoft driver since 1996 - would this work with Blu Rays? No disc manufacturer provides a different driver, and update driver is the correct driver.

  The compatibility list says that Blu - Ray discs should work with the default drivers installed

  I'm quite proficient with PC hardware, after fixing computers for 21 years, but this question has me - and thousands like me on the web - absolutely perplexed. It seems to affect any player Blu Ray with Win 7 installed.

  Please can you help me

  Thanks in advance,

  SoC

  Hello

  Be sure to communicate with decision-makers readers as it is a known problem if it occurs regularly
  with Windows 7. Also keep in touch with Acer for the same reasons - is planning to ask ALL those
  for updates of the firmware.

  Is it possible that you install the same software on the two computer such as antivirus/antispyware.
  security programs or even a CD/DVD player and burn programs or others that may be causing
  the problem?

  If you are sure that it's an update, you can try to remove the update or even re - install Windows 7 and
  block the installation of updates so you can enable them one at a time.

  If you get it working brand a Restore Point immediately make one before installing a
  programs (before each major) and before you add updates.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  How to uninstall a Windows Update in Windows 7
  http://www.SevenForums.com/tutorials/24373-Windows-update-uninstall-update.html

  How to hide or restore the updates of Windows hidden in Windows 7
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  ===============================================================

  Perhaps a repair install might help:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ===============================================================

  You've done most of them however this is my usual convenience store just in case.

  The DVD player does not work after I installed Windows 7 - here are the different readers from Sony
  However the same issue could have an impact on your drive.
  http://support.Microsoft.com/kb/975270/

  -----------------------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows game are not maximized after Alt + tab on

  It seems that whenever I start a game, he struggles to remain maximized.  or if it starts fine and I alt + tab out of it, I will not be able to maximize again.

  If I click on the game in the taskbar, it will maximize to a black screen for a few seconds, sometimes flashing the screen game, reducing me then automatically on the desktop. If I click randomly on the black screen (hoping to activate something in the game) for these few seconds, the game will sometimes load back on the screen and remain stable, but only if I'm lucky and it's a pain in the neck.

  This has only been past moreso in the past months, but it seems more difficult to treat.  I see no changes significant I've done which might cause that.

  I have windows vista 64-bit, Ive tried to play with my display screen resolution and video game options real (my monitor is currently in 1920 x 1080).  Ive tried all sorts of task including alt + tab-switching or "switch to...» "in the Task Manager.  Ive down them as an administrator.  Ive changed the settings for compatibility for the .exe.  None of them have made no difference.  ive tried with several different games, all two (as old as 8 years) old and new games (new this year).

  If it helps to have a game especially allusion when trying to solve this problem, ive got starcraft 2 and dragon age: origins.

  Hey the egg.

  What is the number and the model of your video card and monitor?

  Since the problem is with all games, maybe try with a new driver for your video card. In most cases, get the latest driver solves these problems. If this does not work, you can go for method 2.

  Method 1: Update your video card driver

  For driver updates, see this link:update a hardware driver that is not working properly

  Method 2: Run the clean boot

  A little research showed that many background applications may interfere with the game causing unwanted results. The best bet is to prevent all third party applications to load to the top by performing the clean boot.

  See: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Suddenly, all the printer drivers on Windows update are not digitally signed? So, how to re - install my 3 printers?

  Suddenly none of the printer Co. provides always the downloaded drivers more! And they all quit working, pilots didn't is more accepted, after problems with the Windows updates in general, seem to be fixed now.

  And I finally see HP instructions for a workaround 4 pages long, in Device Manager. But no driver is never accepted to be unsigned digitally suddenly...

  All the printer drivers on Windows update are digitally unsigned? So, how can I install my 3 printers? They are too recent to have discs and HP and Lexmark refer to Device Manager find but none will install because they are not digitally signed. I have W7, W10 and a XP computer for when I have a really frustrated with Windows. Like now.

  How can I reset W7pro and W10pro to accept these drivers yet once, to accept unsigned drivers? What is going on!!!

  Thank you

  I fixed most of my problems of

  -Restore W7 to the 07/01/16 mode without failure and update of the manual setting W.

  -Go back to Firefox 32, with no updates

  -find something new called firewall W features advanced security and made some slash and burn allowing in there

  That's all the misfortunes of weird denied permissions disappeared. I guess I'll stay frozen in time until I get a real solution to all this new protocol permissions I lock the...

  Thanks to you all. I can finally sleep a bit now!

• Indexing options and search for Windows 7 are not locate content of the document since "update" Open Office 3.3 3.4 (he worked for 2 years before that)?

  I have Win 7 with Service Pack 1. I have "updated my Open Office 3.3 to 3.4 and now Win 7 search and options DO NOT locate my document content indexing more? I contacted the support of Open Office: http://user.services.openoffice.org/en/forum/viewtopic.php?f=15&t=55483

  They claim that: "indexing and search in Windows 7 are performed by Windows 7", so there is a problem with Win 7 search and indexing options.

  I checked the indexing options in Windows 7 and the "Index Properties and content of the file" is selected for ALL the 'odt' as well as all the files 'o'.

  I set up a test document: I put only one word "Wednesday" in the Open Office text document, saved and it called "text". I am looking for Wednesday and the search comes up with two other documents containing the word Wednesday in them, but not the Test document?

  I just discovered something. When I did the 'Test' experience above, the file was saved in format 'odt' a:. I changed it to a ".doc" file and it now appears in the search results. As mentioned above, I've changed ALL the files starting with the letter 'o' in Indexing Options > Advanced Options > Types of files to the article: 'properties Index and contents of the file. The description of filter for files 'odt' comes back as: "IFilter shop OpenOffice IFilter" where as 'doc' filter is listed as a: «Filter Microsoft Office» Is it a "Boutique OpenOffice IFilter IFilter: issue" Blocking "the documents appear in the search results? If so, how should I do (I mean in addition to all the documents 'odt' replacing 'doc'?

  Just to clarify: document names 'odt' come to a search, but not the content document.

  Hello

   

   

  Method 1: Run the following fix - it:

  Difficulty of Windows Desktop Search when it crashes or not display results:

  http://support.Microsoft.com/mats/windows_search/en-us

  Method 2:  Restore the computer to a date when it was working fine before:

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Automatic update of Windows buttons are not accessible

  Automatic update of Windows buttons are gryed out and not accessible. I can not change or modify my update settings

  Always indicate what Windows operating system you are using including the Service Pack level and also to advise what security software you use.

  1 check for the 'Automatic update' service manager
  Click Start, select run, and type: Services.msc
  Press enter
  Locate the - "automatic update".
  Make sure that the service is not disabled and started.

  2. If the service is disabled and cannot be started:

  Go to START, select RUN
  Type: regsvr32 c:\windows\system32\wuaueng.dll
  Press Ok

  See also: http://support.microsoft.com/kb/883614/en-us

  and/or

  Automatic Updates options are grayed out? :
  http://WindowsXP.MVPs.org/aupolicy.htm

  TaurArian [MVP] 2005-2011 - Update Services

• Windows 8 are not updated

  updates are not installed. updates are downloaded and 97% installed, but after that, there is a message 'Failure to set up the windows updates, coming back from changes'... my windows have been updated normally before, I get this problem for a month or two.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Cannot access control panel or Windows updates and not more sound

  Yesterday, I restarted my computer and a message keeps popping up that I am victim of software counterfeiting (in reference to Microsoft Windows) when I bought the computer at Future Shop just a year ago. Also, now there is a red X on the speaker icon in the corner and said "no audio output device is installed". I followed the instructions mentioned in another post, as well as other Web sites, and nothing seems them works. Above everything else, I can not access the control panel. It appears and disappears immediately. If this were not already enough, Windows Update does not work or the other. The icon is there, but whenever I click on it, nothing happens.
  I only bought the computer a year ago, and there is already a long list of problems with it. I'm at the end of my rope! If someone is brave enough to tackle these problems, I would really appreciate it. Thank you!

  So.Lai,

  Thank you for visiting the forums of Windows Update. Please post your Windows Genuine Advantage (WGA) related posts in one of the following links:

  For Windows XP:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads/

  For Windows Vista:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads/

  You will find the MVPS and forum MS Moderators who will be able to help you further. Do to the nature of your problem, you must do the following:

  Run the diagnostic tool - http://www.microsoft.com/genuine/diag/

  Then copy and paste the results in your post in the other forum.  No personal information is collected in the diagnostic tests.

  Thank you for visiting Windows Update forum.

  Rick