Window update from HP that is displayed on the screen

Similar Questions

• How can I get rid of non-existent drive (local disk Q :) that is displayed on the screen of my computer?

  original title: How do I get rid of non-existent hard disk that appears on my computer screen?

  I have a local disk (q) that loads automatically on my folder "Computer" [the folder that shows all hard drives and peripheral storage removable]. The drive does not exist and when I double click above it says "Q:\\ is not accessible access is denied." I unplugged my external hard drives, and these drives disappear from the screen by this disc remains still.  How can I get rid of him?

  I found an article from third party in which people have found a solution:

  Hide the Local disk (q) added by Office 2010 Beta

  I hope this helps! (you can back up the registry first)

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 will not change main display when the screen is off

  Hello

  I am running Windows 7 Professional 64 bit on a computer laptop Dell Precision M6800, Nvidia Quadro K3100M graphics card.  I have a 3-monitor Setup: a monitor being the laptop LCD and the other two being Dell U2414h.  My laptop is on the far right.  I had these in extended mode with the installation of Garland Display Port 1.2 for about 1.5 years.  Due to the massive headache of configuring Garland DP1.2 is not not reliable (tons of forums about this) with these monitors, I recently bought a HDMI 2.0 cable so that I could run a U2414h off the coast of the DP1.2 port on my laptop and the other U2414h on the HDMI port on my laptop.  When all three monitors were turned on, I like my main screen for the monitor at the far right.  With the previous configuration of Garland, my main screen would move left to right like my monitors have been disabled (left to right).  With this current configuration (through DP1.2, the other via HDMI), my main screen does not move to my average when the left monitor, we stop, so when I disable my left monitor, I lose my taskbar and all icons (they don't move to another monitor).  Did someone else using a similar setup where they had this problem, and there a will?

  Thanks in advance!

  Have you tried to do the steps on this link?

  Other factors, why you can't reach your goal:

  • Port different types/versions.
  • Port types/versions are not supported.
  • Suggest to use a different separator to display that supports this type of installation.

• My caps lock, shift, NumLock, and icons of volume that is displayed on the screen are gone, and I want them back.

  I don't know what happened to do. How to make a comeback?

  Hello

  Thanks for posting!

  1. have there been recent changes to the system before the show?

  2 what CAPS Lock icon are you referring?

  3. using any tactile function?

  Method 1:

  Follow the link and perform a system restore. Check if it helps.

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Answer with the results, I would be happy to help you further.

• Windows update does not work and displays C80044E error code.

  Windows update does not work and displays C80044E error code.

  Hello

  I suggest you to try the steps below and check if it helps.

  View update history.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Let me know the description the updates that do not have the status.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists then try to set your computer in check and clean boot state, if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  More information: The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• I would like to have at least 1 of my toolbars that are displayed at the bottom of my browser open screen. How can I move a toolbar from the top to the bottom of the page?

  I would like to have at least one of my toolbars that are displayed at the BOTTOM of my browser open screen. How can I move a toolbar from the top to the bottom of the page? I don't want to do this by using an extension, and when I read about the extension, I really have not seen how it would move the toolbar to the top-down any browser page open.
  Thanks in advance for the supply, the answer and the procedure to get this accomplished.

  You can't drag an entire toolbar to the bottom of the window. The Bar of the Addon is a "toolbar", drag whatever you want from the Palette to customize or a toolbar up to the bar of the Addon.

• Code 80070005. After carefully installing Windows 7, Windows update tells me that I must install a critical update that keeps failing

  After carefully installing Windows 7, Windows update tells me that I must install a critical update for the graphics card to Nvidia 9600 m GS on my Touchsmart, but every time I start the process, the download fails with the error code 80070005. I tried several times a day for a week now. Media Center won't play any TV, saying that the correct graphics drivers are not installed. I tried to install the drivers from the Nvidia site, but nothing helped.

  Hi Jos Kelly,

  Try this link, it might be useful:

  http://www.nvidia.com/object/win7_winvista_32bit_191.07_whql.html

  Good luck, let us know if it works.

  Stephen Davies MS

• How to stop messages from Skype that suddenly appears on my screen when other people use my computer? using windows 8

  How to stop messages from Skype that suddenly appears on my screen when other people use my computer?  using windows 8, but I can't control these messages (sometimes very) distracting to appear?

  Hello

  If you are allowing others to use the computer, set up a new account for each user.  They would then not be able to display your desktop or Skype messages.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

• Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista. I shut down the computer?

  Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista.  I shut down the computer?

  Yes. Close and restart, the updates will catch up.

• can older windows updates from 2006 be deleted safetly?

  In Add/Remove Programs, can the older windows updates from 2006 be deleted safetly? or is it better to let them show?

  Hello.

  You have not necessarily needed to let showing itself as they can be hidden by unchecking the checkbox for show updates at the top of the Add/Remove Programs window. However, do not uninstall them.

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Hello

  In Windows 7, the AllUsers folder is not a real file.

  It is a symbolic link that redirects to the C:\ProgramData folder.

  ProgramData is not hidden, by default.

  The correct syntax for the Attrib command would be,

  C:\>attrib h ProgramData

  You can view all files by going to the tab options\View Organize\Folder and research.

  In the section files and hidden files , place a check mark in the Show drives, folders and hidden files.

  Click Apply/OK.

  Concerning

• What is the unit allocation size that is displayed in the window to format USB?

  Original title: allocation unit size

  What is the unit allocation size that is displayed in the window to format usb

  Hi Moaz,

  Thanks for posting your question in the Microsoft Community.

  I understand that you want to know the unit allocation size that is displayed in the format USB window. Correct me if I'm wrong.

  I will certainly help the question of fixing.

  In computer file systems, a cluster is the unit of allocation of disk space for files and directories. To reduce the load of the management of data on disk structures, the file system allocates no individual disk sectors, but contiguous groups of sectors, called clusters.

  On a disk that uses 512-byte sectors, a 512-byte cluster contains one sector, whereas a 4-Kibibyte (KiB) contains eight sectors.

  Refer to the below mentioned article and see if it provides information that you are looking for.

  By default for NTFS cluster size, FAT and exFAT:

  http://support.Microsoft.com/kb/140365

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

  Hello
  I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

  I installed Windows XP Mode.

  I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
  
  I tried several options suggested as
  (a) restarts - did not work
  (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
  (c) try cmdprompt in a high of UAC cmd window.

  I was wondering if there is something else that needs to be done to install this package KB.

  Thanks in advance
  Vishal-

  ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

  I know. You will see that I asked a moderator to post a valid link for this thread.

  Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

  I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.