Window will not be aligned on the menu bar in El Capitan

Similar Questions

• Is it possible to create a page that will not be displayed in the menu bar?

  I would like to create a page that my visitors will be sent to only after submitting a form. I want this page to be unique and not available through the navigation bar. Whenever I have create a page in the plan view it appears so in the menu bar or in one of my submenus when I create a subpage. Is it possible to have a page that is "invisible" to the menu bar?

  Thank you.

  Under the PLAN form, do a right click on the page you want to exclude from your list of menu, go to the Options Menu and select exclude Page of Menus.

• I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2 but I can not Airpay icon on the menu bar of my mac to turn blue when I select the apple TV conn

  I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2, but I can't get the Airpay icon on the menu bar of my mac to turn blue when I select the apple TV connected to a HD from LG smart TV. Help!

  Hi, Arghbee1.

  Please visit Apple support communities.

  I understand that you are unable to AirPlay from your Mac to your Apple TV.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you do not see the AirPlay icon , make sure that your Apple TV is awake and that it meets the system requirements.

  If you do not see your Apple TV in the AirPlay menu, make sure that your Mac and Apple TV comply with the system requirementsand your software from the Apple TV is updated. Also check your firewall settings:

  1. Choose the Apple menu > System Preferences, click Security & Privacy, and then click the Firewall tab.
  2. Click the lock icon and enter an administrator name and password.
  3. Click Firewall Options.
  4. Deselect the option "block all incoming connections".
  5. Select the option "automatically allow signed software to receive incoming connections.

  If your office does not look great on your HDTV, high-definition TV could apply image quality improvements that are not the best for the computer images. Check the manual of your HDTV for more information on how to adjust your HDTV settings for use with a computer. Your HD TV could offer a more appropriate display mode, such as the computer or game mode mode. Also try adjusting the HDTV settings like sharpness, retail building and noise reduction.

  If you mirror your screen and the image correspond to your HDTV screen, you can adjust the size of the Office for the best image. Click the AirPlay icon, and then select an option under "game size desk to." If you fit to desktop size to your Apple TV, the image fills the screen HDTV but will not look as good on your Mac screen. Learn more about overscan and underscan and what you can do about it.

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  See you soon

• Windows will not honor "always use the selected program to open this type of file."

  When I try to open a file *.img using 'open with... '. "I get a window of"Leader Type Helper"asking what software I want to use.  I have check "open this file using a software program (sic) that (sic) is already installed."  This very unnecessarily opens another dialog box titled 'open with' * Sub * the files already browser window fill the screen while I'm not yet aware that the box is here.  Having managed to find, I choose "7-Zip File Manager" and click on the box always saying "use the selected program to open this type of file", and then click OK.  This opens the file using the selected program, as you wish.

  However next time I try to open a *.img file, I again get the window "Help file of Type" and must go through the whole process again.  (By double-clicking on the file shows "Windows Disc Image Burner".)  Why don't Windows 'always use the selected program' like I asked?  Windows is aware that I have chosen before, because it is considered to be the only 'recommended program' in the 'Open with' dialog box  Thanks for any help!

  Care to try another tool?  This small utility can help: http://izt.name/apps/types/

  You will find the file type in the list of icons (.img files, then), and then to change what he uses to open the file by clicking on the option 'open' and edit the properties.

  

• I have FF7 and my history of location bar will not clear either through the menu controls the keyboard, HELP

  I tried to delete all the history of location bar using the tools, the menu clear history and selected all the boxes. I still had the URL of sites in my location bar history. I then tried using SHIFT/DELETE on each URL. The next time I go to location bar history that URLS are back.

  See;

  • https://support.Mozilla.com/kb/clearing+location+bar+history
  • https://support.Mozilla.com/kb/cannot+clear+location+bar+history

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Vista will not start - stuck on the progress bar with MS logo

  Yesterday afternoon, my HP desktop PC would not initialize. The progress bar would be continually scroll down with MS logo, and it will never change. I tried unplugging all USB ports and running system recovery. This morning, the PC said something to the tune of «this machine could not be restored...» If you have recently made a hardware change try to return to your old configuration. If problems persist, please contact your administrator. »

  We had the machine for about 18 months with no problems at all. It is equipped with AMD processors and is running 32-bit Vista Home Premium. I currently have anti-virus protection of software and spyware. I don't think that the office came with a recovery CD. There is a restore disc but I don't know if that was consulted. I tried to boot normally and repair the command prompt startup files with no luck.

  I hope that we bought the extended warranty from Staples, but meanwhile information or suggestions would be greatly appreciated.

  Thank you

  lucasmartin,

  The Advanced Boot Options menu lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. Try the loads up in safe MODE , there may be some drivers that are corrupt or using last known good Configuration.

  For more information http://windowshelp.microsoft.com/Windows/en-US/Help/f9c50a72-04ec-4088-9fd4-a4f979eef5a71033.mspx#EAF

  Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• HP Deskjet 3520: 10 Windows will not let me block the update "ghost".

  I am running in the same question as 'has no updates nightly for Hewlett Packard Imaging NULL print HP Photosmart 6520 series' and 'I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop Window 7 error 80070490 o/s", when I run windows updates I get the message

  "He had problems installing the updates, but we will try again later. "If you keep seeing this and you want to perform an Internet search or contact support for further information, this can help: Hewlett-Packard - imagery - print Null - series HP Deskjet 3520 - error 08024200 b ×".

  The solution to both of these post say is to disable the update is not tried to be applied, however, I use Windows 10 and it seems to be an option to ignore an update than previous versions of windows.

  What are 10 Windows users supposed to do when they are run this problem?

  Hello:

  As you know, Windows 10 has made it impossible to hide or ignore updates (or so it seems).

  I found this tool from Microsoft that allows you to hide updates that don't work, or mess up your PC if they work, (as a synaptics touchpad update has done on my laptop).

  https://support.Microsoft.com/en-us/KB/3073930

  I saved this tool on my PC for use in the future if necessary.

• Windows will not start after replacing the motherboard

  To begin, I must say that I am pretty clueless when it comes to computer skills.

  To summarize, I sent my CPU to a repair shop when my computer has stopped working. I removed my hard drive before starting the repairs because it contains confidential data.  They have narrowed the cause to a faulty motherboard and replaced by a new dissimilar.
  At the store, the guy had a vista 64 bit recovery disc so I have it home and tried to fix it. He said it will be a breeze and relatively bug free. As part of the Startup Repair, I tried to drive the Startup Repair, and tests were all successful except one. An error of diagnosis readings

  "Unspecified system configuration changes may have caused the problem.

  Repair action: repair and checking the integrity of system files

  Result: failed. Error code 0 x 490

  time taken = 720023 ms

  Everything I've done has led to a brief blue screen to the Windows loading screen and then it restarts itself.

  I also tried to restore to the previous two points, but it has also led to the square - a brief blue screen after the loading screen and restarts on its own windows. I'm not ready to reinstall vista and I can't afford to do it too, because I don't have enough disk space to perform another installation. Nor am I willing to reformat one of my two disks.

  If you need additional information on the specifications of the material that must be provided, ask me.

  IM at my end intelligence now, and I really hope to solve this problem.
  Thank you.
  Bryan M

  Hello

  I'm sorry, but you have to completely reinstall the operating system after replacing the motherboard with a different motherboard.

  "Startup Repair" is exactly that: a start NOT a repair system repairs

  What has happened, it is the operating system on your hard disk contains the drivers for the old motherboard and does not and you can't change drivers in doing what you do.

  The only way to solve this problem is to reinstall Vista.

  You wipe the hard drive and restart and make sure that the repair shop gave you the disc to install the new drivers of motherboard after you reinstall vista or download on the website of the manufacturer of the motherboard.

  And here a question for you to consider, too.

  If you bought a copy of Vista retail yourself, you can use the method above to a new installation and then install the new disk motherboard drivers.

  But, if your computer is a trademark of purchased manufacturer, HP, Toshiba, etc., you can not change the motherboard that the license of Vista OEM is stuck at motherboard the origin of the manufacturer that it has been installed on and now you canceled your Vista license.

  See you soon.

• Only the menu bar since update to 18.0.1; No windows. If you press Command-N for a new window, nothing happens.

  Not much I can say. A window appeared yesterday to the effect that Firefox has downloaded an update and that it was ready to restart. When he did, there was no window, no screen, nothing other than the menu bar. If I click on all the options of the file menu (command-T, N, L, or O), absolutely nothing happens. I have that menu bar.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went

  reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went bar & customize window title bar changed...

  By default Firefox will be "reduced to adjust." You who can disable in layout in a regular window or in print preview, but it's hard to call Preview in the window pop up in print, because the menu bar and the toolbar are removed. If it is a common problem, you can use a different add-on (!) which puts the print preview before printing and Page Setup on the shortcut menu.

  I have not used for some time, but I hope that it always works in Firefox 29: https://addons.mozilla.org/firefox/addon/printprint-preview/

• Add icons to the menu bar in 13 items

  Just watched a video in "Ask Bob" and noticed his window of PSE 13 icons on the menu bar, probably his most frequently used. This is a feature that was missing from PES 11 (at least I couldn't find it!), and one that I had hoped would be made available in PSE 13, as it is in almost every other program I use. I don't see how to do it, and I couldn't find a reference in the user manual. Can someone tell me how to accomplish this customization - add icons in the menu bar (or elsewhere) for tasks often used without having to open the drop-down menus.

  Thank you.

  Hello

  I think that "Ask Bob" uses a MAC and those are the icons associated with applications of system not with PSE - it's like the taskbar on a Windows System.

  You are running on a MAC or a Windows system?

  Brian

• History and bookmarks will not appear in the menu bar and have a message "not yet implemented".

  history and bookmarks will NOT display on my menu bar. I can see them both in my sidebar, but not on the menu bar

  This has happened

  Each time Firefox opened

  Is updated for FF 3.6

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene