Windows 10 support/drivers monitor G185H
Hello
I upgraded to Windows 10 and I have a dell monitor and a G185H Acer monitor model. My Dell monitor displays fine on the operating system but my Acer just says no: "no signal". It was displayiong before the update, so the only thing I can think is that there are no drivers available for the moment for her. Did anyone here know if this is the case? If he gets from Acer, you be updated drivers for the older model monitors?
Kind regards
GR
Hey Justin! I had actually fixed by going into the Windows Device Manager and setting of the pilot after the update! Thanks for your response!
Tags: Acer Displays
Similar Questions
-
XPP windows does support multiple monitors (above 3 monitors)?
XPP windows does support multiple monitors (above 3 monitors)?
XPP windows does support multiple monitors (above 3 monitors)?
Windows XP should be able to use up to 10 monitors. However, you may need to use your video device software to manage them as you wish.
How to configure and use multiple monitors in Windows XP
"Windows XP makes it possible for you to increase your productivity by using multiple monitors to increase the size of your desktop. With the use of up to ten individual monitors connected to a single computer, you can create an office that is large enough to hold many programs or windows. »
You can also obtain this information from the built-in in Windows XP Help system. (Press F1, which should bring up & assistance. Type "Multiple monitors" in the search field. You should find some information).
-
15 - e034TX support drivers for windows 7 os
15 - e034TX support drivers for windows 7 required OS...
Hello:
Please see that this related thread. Read the information of saly on the next to the last post on the thread.
-
HP Envy 700-414: HP Envy 700-414 Office windows 7 64 drivers
I didn't like Windows 8.1, because of crashes and recoveries almost every day. So I contacted HP, does not and according to the frustration, I erased the hard drive, disk recovery and all partitions and installed Windows 7 ultimate 64 not knowing not only desktop 700-414 HP Envy Legacy CMOS and HP support don't like no change of. Also, the biggest problem is supported for the HP Envy 700-414 Office windows 7 64 drivers are extremely hard to find, especially drivers LAN Modem, if they exist in HP supports. What can I do?
Hello:
This model has the same motherboard as you and has a complete set of W7 x 64 drivers.
Do not use the BIOS or the files of the firmware of this model on your.
-
HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?
Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:
I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?
Thank you very much!
Paul
Hello:
If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.
You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.
Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.
Paul
-
If you want to learn the basics of using Windows 8, HP has a support topic that addresses exactly this. The topics included are:
- Getting started with Windows 8
- Learn how to use the new interface to start, charm Bar and gestures
- Printing from Windows 8
- How to find drivers
- How to troubleshoot printer installation problems
- Learn how to use your printer HP with Windows 8.
- Scanning
- Faxing
- Applications Windows 8
- Learn how to get and use them
You can view detailed information on the following link:
I hope someone finds the topic useful support with learning of Windows 8 and the basics of its use. If anyone has a question about the topics covered in the topic Windows 8 support just after below.
- Getting started with Windows 8
-
I keep getting an error on c:\windows\system32\spool\drivers\w32x86\3\dlcjtimedll lack entry: run dll entry.how can solve this problem?
Hello
DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer then re - install
pilots. If you no longer use the printer and then subsequently properly, delete the printer. Also
Contact the Dell Support and forums for known problems.Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerHow to uninstall a printer from your Windows based computer
http://www.ehow.com/how_2299771_uninstall-printer-from-Windows-based.htmlDell drivers
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell support
http://support.Dell.com/Dell forums
http://en.community.Dell.com/forums/=================================================
If necessary use to remove the error.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
http://support.Microsoft.com/kb/929135How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlHow to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps and happy holidays!Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
OfficeJet 6700: windows 10 supports for officejet 6700
Are there any support/printer drivers HP for the OfficeJet for Windows Enterprise 10 6700?
Hello
Windows 10 is still in its beta phase, any pilot will not be provided before the release of the operating system.
From my experience, Windows 8.1 drivers should work fine, I suggest to give it a try:
Shlomi
-
After update my PC with the latest patches I started getting the following error message every time I reboot:
Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll
Entry: rundllentryI know it has to do with my Dell printer and I have uninstalled and reinstalled the printer, but keep getting the same error message. What is the cause and how to fix?
Hello
See this message from Dell - even if the models are different ago probably similar
problems with your computer and your printer. http://support.Dell.com//support/topics/global.aspx/support/DSN/en/document?c=JM&DL=false&l=en&s=Gen&docid=28E393B4B4A5ADEEE040A68F5B2849AA&doclang=en&CSCheck with Support from Dell and their forums.
Dell support
http://support.Dell.com/Dell forums
http://en.community.Dell.com/forums/
------------------------------------------------These could help however check with 1 Dell.
What is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htmI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows xp reinstall drivers boot disk system
I deleted by mistake some drivers system for departure upward on Windows xp and I need to reinstall them if I can run in normal mode instead of safe mode.
http://www.Dell.com/support/drivers/us/en/19/drivershome/showproductselector
Go here, enter your express service code located next to the sticker of coa on your pc, this will lead to a page with the necessary drivers for your pc more precisely.
There is a certain order to install dell drivers:
SO THAT DELL INSTALL DRIVERS
Software for desktop or Notebook System Software
Chipset or SMBus driver
Processor driver (if applicable)
Video
Audio (sound)
Input drivers (keyboard/mouse)
Modem
Network card
more important are the first 2 after it did not really matter, restart after one and then two.
-
Windows xp support bi-ecrans screen runs at the same time?
Windows xp support bi-ecrans screen runs at the same time?
Hi stuckfree,
If you plan to use a dual monitor set up with windows XP, I suggest that go you through Microsoft Help section that will guide you to do the same thing.
How to configure and use multiple monitors in Windows XP
http://support.Microsoft.com/kb/307873
See also:
Setting up dual monitor: two screens are better than one
http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=-4WMSOu6qnn
Hope this information is helpful and let us know if you need more assistance.
-
Original title: starting Windows Error Message
Starting Windows I get the message: error in entry c:\windows\system32\spool\drivers\w32x86\3\DLCCtime.dll RUNDLLentry
Hello
Have you made changes on the computer before this problem?To narrow down on the issue, I suggest you to check the behavior by starting the computer in a clean boot state. You can read the article and check.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: after a repair, be sure to set the computer to start as usual as mentioned in the "steps to configure Windows to use a Normal startup state" section of the article above.Let us know if that helps. -
Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:
-IDT Audio system tray app has encountered a problem - sttray.exe and
-Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry
I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.
Thank you
Dennis Holmquist
Hi Dennis,
DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.
Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.
To connect a printer directly to your computer
See also:
Microsoft Windows XP - add a printer attached to your computer
For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.
-
I have a Canon MX850 printer: when the document is passed, I get the following error and it repeats until I have load with paper and press OK. I'll have 30-40 on the screen before I can reload the printer with paper. I deleted the printer and reloaded it. I scanned everything and nother works.
---------------------------
RUNDLL
---------------------------
Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\cnmsm98.dllThe specified module could not be found.
---------------------------
Ok
---------------------------
billtriceHi billtrice,
I suggest that you contact Canon support for more information on the issue.
http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer
-
I get this message and have no idea what it is or what it touches.
"Error in entry: RunDLLEntry C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\DLCJtime.dll missing.
Can anyone offer a solution to get rid of him?
Hello
This message refers to Dell printer drivers. You can try simply remove and reinstall the printer drivers relevant to get rid of it.
If not, visit this link to the Dell website, it can be applied to your system too:
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=JM&l=en&s=Gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true
Maybe you are looking for
-
I want to classify several bookmarks in a folder. What are the steps to make a new folder?
-
Wrong version of Adobe Flash Player
I downloaded Adobe Flash player 11,9,900,117 update 094 to 117. I use http://www.adobe.com/software/flash/about to determine which version I'm running as well as the current version of Flash. I did it with IE Explorer. So I thought that I was present
-
Satellite L875-S7153: Activation of Windows work no-error 0xc004f074
Hello, I bought some time ago a laptop model Toshiba Satellite L875 S7153. early in the day at the moment I have turnt turn it on and connected to the internet, I gave the warning that is not Windows 8 could be activated now. Every 2-3 hours it gives
-
Taken WT310 of headset does not
I bought the Tablet 5 days ago, and 2 upgraded to Windows 10 days ago. All the drivers are up to date - 10.0.10240.16384, Audio Driver 6.0.1.7541. I show disabled devices, showing disconnected devices.My problem is that it does not recognize a microp
-
F5 4 K upgrade and Shogun and the Odyssey
So it seems if we get the upgrade 4K F5 now works with the Shogun and Odyssey as the F5 will now 4K of SDI and HDMI output. It also means that we can reocrd 4K Prores as REH in RAW format? Heard this in one of the IBC. I am wrong in any of these assu