Windows 2000 on the Fusion 6?

Similar Questions

• Cannot run or install images of Windows 2000, Windows 2000 works with Fusion 5 Pro?

  I have existing images of Windows 2000 tried to run. I also started an installation of Windows 2000 from scratch. Each time Windows 2000 appears at startup with the | bars progress, but when you get to the end, my Mac everything freezes. I have to hold the power button / stop. So far, Win XP and Windows Vista work fine.

  Windows 2000 works with Fusion 5 Pro?

  I use a MacBook Pro of the retina with the default settings.

  Or, go into the settings for this virtual machine and under Advanced.

  change the preferred virtual machine runtime engine for ' Intel VT - x / EFA ", for each of these virtual machines, give you problems.

• can we install windows 2000 on the i3 system

  can we install windows 2000 on the i3 system

  Depends on if you can get the drivers for your Windows 2000-compatible hardware; you need to verify that hardware manufacturers laicists site to check the drivers. Most of the hardware manufacturers are not even the creation of drivers for Windows XP that is newer than Windows 2000.

  Check out the thread below (specifically the post from Andre Da Costa) from earlier today about the installation of Windows 2000 as a virtual machine.

  lnstal dual boot win 2000 on existing Win7Pro64bit
   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/lnstal-dual-boot-win-2000-on-existing-win7pro64bit/fac80945-70f0-4e18-9c1a-65acbb1ec85e

  Kind regards

• Windows 2000 is the network via an ethernet connection does not work.

  Windows 2000... CHANGED DIAL UPWARD... FOR ETHERNET
  I just installed a Lan card so I can connect an Ethernet cable to the router, as I had the OLD DIAL-UP CONNECTION to A TELEPHONE LINE...
  but I am unable to connect to the Internet... I checked my device manager and it say's works well... I asked my Internet provider for help on the connection, BUT ILS DO NOT SUPPORT MY WINDOWS VERSION
  Can someone please advise

  Hello

  I suggest you to download and install the drivers for the network card and check if it helps.

  You can try to get the drivers, go to the manufacturer's Web site and check the version of the windows 2000 drivers.

• Using Windows 2000, resetting the system.

  Original title: Microsoft WINDOWS 2000 PROFESSIONAL HELP

  MY MOTHER BLESS HER SOUL HAD A FRIEND TRY TO RESET HIS SYSTEM BY CLICKING THE START KEY F8 KEY AND IT MESSED UP THE COMPUTER SO THAT IT CAN NOT GET ANY TEXT WHEN YOU GO TO PROGRAMS OR THE PANELOR OF CONTROL ANYWHERE. EVERYTHING THAT SHE GETS IS BOXES OR SPACES SO YOU CAN'T TELL WHERE YOU ARE. CAN RESET US THE SYSTEM

  Hi James Steege,.

  Support for Windows 2000 has been completed from Microsoft. For more information, you can check the mentioned link.

  Center end solutions Support Windows 2000

  http://support.Microsoft.com/ph/1131

  Hope this information helps.

• Reformatted a disk ATA Windows 2000 to XP, how is programs see windows 2000 as the OP?

  He completed the drive reformatted as an NTFS format and Windows XP is installed.  The problem is that I can not install a service pack beyond 2.0 without the multiple errors of program missing a .dll library or another.  As soon as I think I have fixed another appears on reinstall.  I can manage to install service pack 3.1 but that kills my wireless adapter.  I can't install all my virus protection due to the fact that my virus protection does not install if somewhere, she sees a reference to Windows 2000.  Windows 2000 has been completed erased on a complete reformat of the hard drive.  Anyone who can help me understand the reference maybe to hide that I would appreciate that I have no firewall or virus protection on my computer right now as a result.  Help!

  He completed the drive reformatted as an NTFS format and Windows XP is installed.  The problem is that I can not install a service pack beyond 2.0 without the multiple errors of program missing a .dll library or another.  As soon as I think I have fixed another appears on reinstall.  I can manage to install service pack 3.1 but that kills my wireless adapter.  I can't install all my virus protection due to the fact that my virus protection does not install if somewhere, she sees a reference to Windows 2000.  Windows 2000 has been completed erased on a complete reformat of the hard drive.  Anyone who can help me understand the reference maybe to hide that I would appreciate that I have no firewall or virus protection on my computer right now as a result.  Help!

  Download and use the Diagnostics utility by the hard drive manufacturer to analyze the hard disk completely to find errors.  My suggestion, if you find no errors, is to ensure that your backups are current format and low level of the player in question (zero / filling/zero-write).  Next, install your Windows XP, SP1a + SP3 + many post-SP3 updates.

  Also - have you got the latest drivers from web sites by the manufacturer of material for various hardware components in your machine?  No operating system comes with all the (or even most) drivers for hardware devices.  :-)

• Internet Explorer is the best for my Windows 2000 with the Office?

  I think I have IE6 and want to upgrade to 7 or 8, but do not know if my Windows 2000 SP4 operating system is compatible... advice?

  Hello

  Your choice is easy as 2000 is not compatible IE7 or 8. I'm sorry.

  IE7
  http://www.Microsoft.com/Windows/Internet-Explorer/IE7/

  IE8
  http://www.Microsoft.com/Windows/Internet-Explorer/default.aspx

  You can add the Windows Live toolbar to get to navigation tabs
  http://smallworkarounds.blogspot.com/2008/12/tabbed-browsing-in-IE6-how-to-get-tabs.html

  Look at Maxthon that runs on the IE engine
  http://www.Maxthon.com/

  Rob - bicycle - Mark Twain said it is good.

• Where is the graphics driver in Windows 2000 for Fusion 3.01? Stuck in VGA :(

  People

  I just upgraded from Fusion 2 to 3.

  Overall, it works well except for a Windows 2000 SP4 virtual computer. When I started it OS complained that the VMWare SVGA driver is not compatible. I thought okay - we're going to update VMWare tools. It worked too, but (as usual) I received the message at the end of installation to the effect that the graphics driver must be manually installed. Yet once I went for him... but for the life of me I can't find the CD virtual VMware. Usually it would have been in

  Program File\ VMware-VMware Tools-drivers, but all I can see are SCSI drivers...

  Any help would be most appreciated as I'm not stuck with a VGA screen! http://communities.VMware.com/message/1453346/ !!

  I dcn can't run Windows 2000 on my Mac.    But I run Win2000 VMs VMWare Server and Player.  The video driver installs normally with VMWare Tools in these cases.

  I noticed this on page 24 of the guest operating system guide:

  After you have installed VMware Tools, modify the Windows 2000 screen area to be larger than 640 x 480 pixels; If you do change it, Windows 2000 uses the standard VGA driver, and performance will suffer.

  I would say, try to uninstall tools, restart Windows, and then reinstall the tools.

• Tecra M2 mapping of the keyboard in Windows 2000

  Hi all

  I have a Tecra M2 on which the WinXP was removed and replaced by a new installation of Windows 2000 SP4 (I prefer not to go into detail as to why this took place).

  My problem is that the keyboard mapping is not correct under Win2000, for example if I press shift + 2 I get a @ and not a '. '. The problem exists with almost all the characters of Maj (' |,-,', ~,', ', @, #, etc..).

  Note that I don't use any software that remaps the keyboard.

  Does anyone know how this bee fixed?

  Thank you very much

  Hello

  I have the same problem on my laptop, but I don't have time to look at the problem until I saw this ad...

  Here is the answer for Windows XP, I guess it's the same for Windows 2000, because the systems are similar.

  Under start/setting/control panel, you will find the icon "regional and Language Options". Double click it and you get a new window. Select the folder "Language" then "Details". A new Windows pop up and from there you can select 'Add' services 'install '. Select your language to enter the menu drop-down, then click on 'OK '. Ensure that the value "default input language" is correct, then click 'OK' and click on 'OK '.

  Normally, the operating system needs to restart to set the hardware!

  Your keyboard should work correctly after the next system startup.

  Let me know if it works for you

  Rusty

• Installation of the windows 2000 satellite M40X chipset

  I currently own a M40X which has been pre-installed with Windows XP Home Edition, but due to the nature of our business, I now need to install Windows 2000 on the machine. Drivers XP for audio, video and wireless network etc all work fine on 2000, but unfortunately the chipset drivers na? t seem to work at all.
  I was wondering if there is anywhere I could get Windows 2000 compatible drivers like the USB ports and some other components are now rendered useless.

  Any comments or help is greatly appreciated
  Thanking you in advance

  Hello

  The chipset driver utility made by Intel, and I guess that chipset from the Intel Web site for W2k driver should also work on the Satellite M40X.

  I recommend this site:
  http://downloadfinder.Intel.com/scripts-DF-external/Support_Intel.aspx#

  You should check what chipset you have and then to install the right software.

  PS: I'm not 100% sure but I guess there must be chipset type 'Mobile Intel 910GML Express Chipset with CeleronM or Mobile Intel Express Chipset 915GM' Mobile Intel 915 PM Express Chipset

  Good luck

• Why did datasocket works on some of the computers in a windows 2000 network, but not others?

  I use an executable program of labview which write Boolean arrays on multiple computers in a network and their bed on a computer 'server '.  All the client computers are running windows 2000 with the labview run time engine 8.6.  The server computer is running windows 2000 with the labview 8.6 developers edition.  I can only contact between a client computer and the server computer.  Communication will work either way between these two computers.  Either the computer can sucessfully read or write data datasocket.  Other computers cannot communicate in both directions.  All the computers are on the same network in the same workgroup and can see through the network.  It doesn't seem to be a firewall on all computers.  Suggestions?

  It seems he needs the installation standard/full engine runtime 8.6 with decision-making data.  I had the engine smaller run time file installed on the computers that did not work.

• Can a system using Windows XP Professional remotely help another system by using Windows 2000 Professional and control 2000 Professional computer to help solve the problems?

  Windows 2000 Professional has the capabilities of remote assistance?  My sisters husband just passed away and she doesn't know anything about computers.  All their documents, photos, ect..., my brother-in-law kept on the computer.  We live thousands of miles away and I can't fly to him.  Can I remotely access her computer and control it with mine that uses Windows XP Professional?  If the answer is "Yes", if you please tell me how to do it.

  Hello Jeff,.

  -Remote Office application do you use?

  You will be able to connect Windows XP computer to Windows 2000 via the remote desktop connection.

  I suggest you to check the following links for the desktop connection software remotely for Windows XP and Windows 2000.

  Windows XP Remote Desktop Connection software

  Configuration of remote desktop

• I need the generic drivers bluetooth for windows 2000

  I need the generic drivers bluetooth for windows 2000

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.General&cat=en_us_22765189-A408-4423-8e95-f2050920b5e5&lang=en&CR=us

  Discussions in microsoft.public.win2000.general

  They will help you with any question of Windows 2000 in the Windows 2000 Newsgroup at the above address.

  See you soon. Mick Murphy - Microsoft partner

• The upgrade from Windows 2000 to Vista

  Yes, I'm trying to determine if I have to install windows vista after using Windows 2000 for the past eight years.  When XP came out I could see no reason to change because XP couldn't do anything more than Windows 2000.  Now, vista is out and everything ever written on this subject, it can do nothing more than Windows 2000.  Even if the voice activation has been fully successful since 1995, I heard that vista does not come with it.  Even if software video free DVD for many years, vista does not come with it.  Although windows 2000 integrates the easier menu system ever created, vista does not support the menu of windows 2000 System.  Windows 2000 starts, opens all programs instantly, works with internet and who manages all programs perfectly right now, in 2008, they made another OS.  Why did do XP and vista?

  So, why anyone would take another version of an OS after that the first works perfectly?  I've never understood this.  Help, please.

  Peter, there are several good reasons to upgrade to Vista. Depending on what you mainly use your PC for some may be more appealing then others. The following link will help you to discover who has the largest retail dealer and the will you more information about how to upgrade:

  http://www.Microsoft.com/Windows/Windows-Vista/discover/default.aspx

  Thank you for your message and please let us know if there is anything else, we can help you.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install Windows 2000 on Equium A200-1VO?

  Hello

  Can someone help me?

  I would like to install Windows 2000 on the Toshiba Equium A200-1VO laptop, but I need the drivers to do this.
  I have tried the Toshiba web page but cannot find the drivers.

  Can someone please?

  Thank you

  You will not be the drivers because this Vista designed for laptop is not supported by this old operating system. Maybe you can find the drivers for Windows XP Home edition, but not for W2000.

  All you can do is search for the drivers on the net and hope you have success with it.
  I don't know why you would do this, but perhaps you should accept that at some point Toshiba must say stop and don't waste time with the support of the older operating system. I also believe that 0.01% people want to use this old operating system on new generation laptops.

  There is no sense to make support for W2000. What do you think about this?