Windows 2000 SSL certificate export

Similar Questions

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• 8i/windows 2000 server and import export in 10g / windows 2003

  We took the 8i/windows 2000 server and import export in 10g / windows 2003 server.
  
  I created the empty database in 10g (sys, sysaux, temporary table space) and
  
  made other tablespaces from the database of parnet with autoextet
  
  When importing in 10 g / windows server 2003, it throws IMP-00015
  
  After importing all trying to connect to other databases using db link (created before export), the error message is ora-02019.
  
  HOW TO GET ALL THE privileges to use & roles (sys & object) after importation.
  
  Another thing is to know how to check the integrity of a database after importing in 10g.
  
  What are the steps I need to take before exporting?
  
  I have disabled all triggers before importation, what I need to do before exporting?
  
  I activated all triggers after the import.
  
  
  
  Published by: user608512 on July 30, 2009 20:02
  
  Published by: user608512 on July 31, 2009 07:40

  Re: finding the right user account

• replace the SSL certificate in Dell OMSA 7.2

  My University is compels me to replace the Dell's SSL certificate in OMSA with a certificate from a certification authority.  We use InCommon.

  I generated a certificate using Microsoft IIS request.  InCommon generated the certificate and got sent back links to a variety of formats.

   as PKCS#7 Base64 encoded:
      Other available formats:
         as PKCS#7 Bin encoded:
         as X509, Base64 encoded:
         as X509 Certificate only, Base64 encoded:
         as X509 Intermediates/root only, Base64 encoded:
         as X509 Intermediates/root only Reverse, Base64 encoded
  
  Does anyone know what kind of certificate I need, and exactly how to install it in the apache server that runs Dell OMSA.
  

  Ok.  I have an answer.

  As far as I know, the interface Dell OMSA itself does not have to import the intermediate certificates (returns an error) and cannot be used to create a useful CSR (signature request) because you can't specify your own institutional settings. Our CA would not authenticate the CSR request generated by the Dell OMSA interface, even if it would incorporate new certificates (which she seems to fail at the).

  The simplest approach is to generate a CSR in Windows IIS, the authenticated certificate back from your CA, and then to export to a .pfx file (private, final, intermediate entity certificate and certificates root key, extended attributes).

  Use IBM tool called keyman (download www.ibm.com/developerworks).  Use the version of Windows.

  It can convert a .pfx file in a keystore apache in 3 easy steps.  1. create a new key file

  2 import the .pfx file 3. Save the key file.

  Tips on the internet suggest keeping all the passwords the same - pfx export, keystore, key, etc.

  Edit the server.xml file in the apache server to use your new password.

  Only downside is that your password will be readable text in the server.xml file.  In the original file server.xml file Dell used system tools or java to hide passwords.

• Firefox for Mac does not recognize a valid SSL certificate

  Firefox for Mac does not recognize the SSL certificate that is valid for this site, I got: https://www.georgeglazer.com. It gives a warning "not reliable." However, the Firefox for Windows does not give a warning. This happens even if I clear the cache and it happens in the Mavericks and OS of Yosemite. The certificate is up-to-date and with Comodo. Firefox for Mac is now the only browser producing these errors (v. 39, put updated) - Internet Explorer, Safari and Chrome are not. Our hosting provider has said it's probably a browser issue, perhaps having to do with intermediate certificates in Firefox being obsolete. I really hope you'll solve the problem, as it's annoying for us when we're going to do right by our customers and pay for the SSL certificate. I have attached a picture of the warning and the other from what you see on a PC: a pop-up that says it is a verified SSL certificate and gives details about the issuer, the period of validity, etc.

  COMODO should you sent a link to download the file 'bundle' containing the intermediate certificates. Who needs to go in the same directory as the certificate of your site. If you are using a control panel, your host can probably help with this process. And if you bought through them, shame on them for not taking care of this for you already!

• Thunderbird does not recognize a self-signed SSL certificate

  Dear support,

  I have a very strange problem that I don't understand.

  I run a server ISP offering IMAP and TLS/SSL HTTPS encryption. Both services use the same SSL certificate issued by RapidSSL/GeoTrust Server edward.ennabe.de

  When I open an https connection to the server, Firefox correctly solves the certificate chain and use the certification authority root Equifax (which is correct).
  However, when I try to connect to a mailbox via Thunderbird, all I get in the hierarchy of certificates is my server edward.ennabe.de. I don't think that it's "working as intended", or is it?

  Is something wrong with my Thunderbird or My Dovecot configuration? What is really strange that firefox recognizes it correctly.

  Thanks in advance

  Kind regards

  ZeroEnna

  In Thunderbird, click the 'Détails' tab in the display of the certificate.
  See all certificates of CA listed in the field "Certificate hierarchy" also installed in your Thunderbird certificate store?
  When checking this look for the tab 'authorities '.
  If there are no certificates listed in the missing chain in the Thunderbird certificate store (for some reason any), you can try to export it in Firefox and import them into Thunderbird.

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Install a new SSL certificate for Server 2008 R2

  Hello

  We have a Windows 2008 R2 server running of the machine. As a company that manages payments, we need to be registered PCI DSS and the scan picked up a point of failure is that we do not have an SSL certificate installed. I bought a via GoDaddy and followed the instructions on their site to install it, but the PCI DSS Analysis is always a failure for the following reason: -.

  "The following certificate was at the top of the certificate chain sent by the remote host, but is signed by an unknown certification authority."

  The certificate at the top of the string is the default "integrated". How to promote the certificate GoDaddy installed at the top of the chain?

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• RVL200 and Windows 2000 Server - can not access network resources via VPN

  I am new to the VPN, and I feel I'm missing something very basic in my configuration. I just installed a RVL200 as the gateway for my corporate network router.  The network includes a Windows 2000 Server that acts as server DHCP and several PC and a printer.  I was able to "establish a SSL VPN tunnel" home connection to the router, but after recording in everything I see is the screen of virtual Passage - one with lock icons - otherwise I am inside the router.  The statement shows that I am connected.  Once the tunnel is established, what am I supposed to do to get computers to the computers on my network?  I can ping all computers on the network using their LAN address.  I'm supposed to see a choice of network resources to get to this point?  I put the router as a trusted site in the server and even tried to disable all firewalls, but I see that the VPN screen with icons.  I don't know how to proceed from here because I don't know what I'm supposed to see.  Thanks for any help that you can give to a newbie!

  The SSL connection is only for the VPN router. To access the computer, you can use Windows Remote Desktop connection. So that you can access to remote computers on the network, or you could look for 3 third-party software for remote access

  Hope this helps

• Internal and external customers see certificate of Cisco router, NOT Exchange SSL certificate

  Cisco 876 Integrated Services router (ISR)
  Exchange Server 2010 SP1

  Customer: 2013 Outlook, OWA, ActiveSync WP7/WP8 (?)

  Put us in place a new Cisco ISR. Almost everything works fine, with a few exceptions. Exchange e-mail stopped altogether for several days until I realized that I needed to redirect the ports, SMTP, HTTP, and HTTPS, by external to the Exchange Server. Now, mail flow is fine, but...

  Every time I start Outlook, I get a certificate error. When I look at the certificate in the error popup, it points actually to certificate self-signed Cisco router. When we try to use the Windows phones, they get a "certificate error" and direct the user to the network administrator. Even with OWA: a certificate error, even if it can be "accepted" / overridden.

  Each customer can still work, with the exception of Windows phones. In Outlook and OWA, mail is always be sent and received, but must be accepted manually that the certificate is wrong before the customer takes care, and then it takes a little longer to load.

  Any ideas?

  I did "" port forwarding on the pots of 25, 80 and 443. Again, I did it yesterday and now mail seems to flow, whereas before, even if we could enter the client with Certificate error, message not be received. (There was also a problem with mail however not passed, but that was due to our mail relay provider and was set yesterday as well...)

  Everything worked fine with the previous router (obviously). It was a high-end, the level of consumption Fritz! Box commonly used in Germany. I also had to allow ports through this box is not unlike using the nat ip inside static commands on the 876, but I don't know what he could have let his own or why SRI is the Exchange Server application SSL certificate hijacking.

  Thanks in advance for any help.

  jeremyNLSO
  CCNA Routing & Switching, CCNA security
  MCITP, MCTS
  Berlin, Germany

  If we have actually figured this out today. The internal DHCP Server distributing the a DNS Server public as well as the internal DNS. The internal DNS was time and the customer became the external IP address of the public DNS and it received an unexpected cert of the router. Once we removed the public DNS servers from the DHCP server and used only DNS servers in-house, that the issue went away. Logical after we realized what was going on.

• [Q] how to build and install an SSL certificate signed for the management of a Cisco 5508 WLC?

  Our security policy requires that all web pages admin must be signed by our CA business. I have successfully implemented a SSL certificate 3rd party Auth Web our WLAN of comments, but I need to install a self-signed certificate for the management of the WLC himself. I followed the instructions here:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

  but it was more useful for Web auth. I can't find a specific document explaining how it should be done for the management interface.

  Any help much appreciated.

  (1) Please use a password. Empty passwords regularly give problems.

  (2) you don't recombine the key with the certificate before you download to the WLC:

  Combine the CA.pem certificate with the private key, and then convert the file to a .pem file.

  Type this command in the OpenSSL application:

  openssl>pkcs12 -export -in CA.pem -inkey mykey.pem -out CA.p12 -clcerts
  
      -passin pass:check123 -passout pass:check123
  
      
  
      !--- This command should be on one line.
  
  
      openssl>pkcs12 -in CA.p12 -out final.pem -passin pass:check123 -passout pass:check123
  
      

  Note: In this command, you must enter a password for the parameters -passin' and -passout . The password is set to the setting -passout must match the setting SubscriptionId is configured on the WLC. In this example, the password is configured at the time the -passin' and settings -passout is check123. Step 4 of the procedure in the section download the WLC third certificate of this document deals with the configuration of the SubscriptionId parameter.

  The final.pem is the file that is transferred via TFTP to the Cisco WLC.

  Now that you have the certificate of the third-party CA, you must download the certificate to the WLC.

• How can I move my registered e-mail, e-mail folders and contacts from my Windows 2000 computer using Outlook Express 6 on my new computer Windows 7 with I guess Windows Live Mail or Outlook 2010?

  Hello Microsoft...

  I just bought a new computer with Windows 7 coming next week... I was told to download Windows Live Mail (?), because Outlook Express is no longer used (?), and the new computer will also Microsoft Office 2010 student Addition as well... so my question is would you please, 'how can I move my email, files saved e-mail and contacts to my Windows 2000 machine using Outlook Express 6 to my new Windows 7 machine with I guess Windows Live Mail or Outlook 2010?  I'd appreciate any help available...

  Thank you very much

  Michael

  Transfer of data from Outlook Express and Windows Live Mail:

  For Messages:

  Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail. Open WLMail and: file | Import | Messages | Microsoft Outlook Express 6, and the point where it was saved.

  Location of OE message store:

  In OE: Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  For addresses:

  Open the address book in OE and file | Export | Address book (wab) and save it to the desktop. Copy it to a flash drive. Place it on the desktop or another location on the computer using WLMail.

  Open the Contacts list in WLMail, (go |) Contacts in the Menu bar) and the file | Import | Address book (wab) Windows and the point where you saved it.

  Note: If you use a CD or a DVD instead of a flash drive, after placing on the new machine you must remove the read-only attribute in the properties before you import.

  For the account settings:

  In OE: Tools | Accounts, select the account and export it to the desktop. This will be an .iaf file. Copy it to the new computer and WLMail desktop: tools | Accounts and import the settings from the location you saved the.

  Bruce Hagen ~ MS - MVP [Mail]
  Imperial Beach, CA

• Get Windows 2000 CRL on a router

  I'm setting up devices with VPN site-to-site using Microsoft Windows 2000 Certificate Services to provide the certificates.

  I had connections to the top and running successfully; However, when you download the CRL, I find that it does not contain certificates revoked - where the VPN remain active.

  If someone has encountered similar problems, or have suggestions for a solution?

  Thank you, Matt

  What version of the code you run? You must run 12.2 T code for this. I got this job in 12.2.8T. Does not work in 12.0 and 12.1. Also, have you tried the new certificates revoked on your Publisher. The default value of microsoft is one week. This means that, even if you have revoked certs, the crl list wont be automatically updated, as simple as it sounds. So until the new CRL is published on the server, you will get a new crl list updated on the router. You can change the default on the server, or you can manually publish a new crl on the server list. Publishing manually the new CRL, from your Certificate Manager select revoked certificates, and right-click on it. Should be able to select Publish. Not to have sitting here in front of me but I'm sure it's his property.

  Kurtis

• Red vCenter - unable to check CA (PSC) signed SSL certificate vCenter VMware

  I am trying to deploy a new Horizon view 7 based on vSphere environment 6 U2 to replace our pod 5.3 view existing. I have a Windows Server vCenter Server with separate PSC of Windows. I used the PSC signed the SSL certificate for vCenter and downloaded and added the certificate authority root for the required workstations and servers via Group Policy. If I navigate to vCenter from your desktop with CA root installed all is well on the HTTPS front. I added this vCenter Server in my environment view but it appears in red on the dashboard view. I clicked on the vcenter Server and checked the certificate, but at no time should you go green. The two connection servers have the CA root installed and if I launch a browser from the connection to the server itself, then navigate to the vCenter FQDN certificate is approved.

  Any ideas?

  I cannot create pools for this reason that the view is not currently communicate with vCenter as well and it won't let me choose a virtual machine model.

  If you need to know more details please let me know and I'll happily supply.

  Thanks in advance.

  Having re-read the Horizon view documentation 7 to confirm that I had taken the correct steps already, I decided to restart both of my new server connection, that solved the problem. My vCenter server now shows in green in the dashboard and I was able to successful deployment of desktop computers.