Similar Questions

• BSOD 0 X 50 & 0X1A MEMORY_MANAGMENT

  I have a computer that has about a year and a half, I built there I'll post the form below. I have Windows 7 Home premium running on it and I was doing the blue screens lately with two errors. 0 x 50 PAGE_FAULT_IN_NONPAGED_AREA and 0x1A MEMORY_MANAGEMENT. I was getting the blue screen of 0 x 50 only at the beginning so I did research and what I found out, is that the 0 x 50 is linked to one of the few things, a hardware problem, a problem of antivirus or a partition problem. I excluded the antivirus issue because I ran several antivirus (AVG, Avast, Trend Micro, etc.). I have run chkdsk /f /r and reformat the drive and re installed windows without error at all, I have completely updated the drivers and after the doing received BSOD 0 x 50. I ran memtest86 + on the computer during the night (for 8 hours) and received no error. the next day, while I was running the computer trying to get something happening I was running just twitch.tv watch the CHA when I got a new MEMORY_MANAGEMENT BSOD 0x1A that lead me to believe that he was a RAM problem after doing some research. But I ran memtest86 + again for another 12 hours and all, I have not received any error. Can someone lend me their spirit and help me understand this? I can post a DMP file to the 0 x 50, but in my own folly I ran ccleaner to clean things up and remove the event log of the 0x1A who I was regretting.

  Please help this computer is my work, I really am trying everything I can to solve this problem.
  Processor AMD FD4100WMGUSBX FX-4100 - 3.60 GHz, 2 MB L2 Cache, L3 Cache, Quad Core (3.80 GHz Turbo) 8MD, Socket AM3 + 95W
  MSI 990FXA-GD65 V2 AMD 990FX card mother SATA 6 Gb/s USB 3.0
  Patriot Viper 3 Performance extreme Black Mamba PV38G186C9K memory 8 GB DDR3 1866
   
  EVGA Geforce FTX 550 Ti superclocked 1 GB DDR5 ram
  2 TB WD hard drive Red
  Power supply 700W OCZ Technology
  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run this test to find out which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

• "Bcdedit-set {default} displayboot menu" does not-server windows 2012 R2

  Microsoft support cherish,

  I have windows server 2012 R2 running the Dell server 'PowerEdge R210 II', today found that the server suddenly unable to windows for lunch and when I tried to lunch the server it asks me to insert the CD of windows media and after that it stops popping to insert the support CD, and now it shows me an error "can not find script file c:\remindpopup2.vbs.

  I tried to access the windows safe mode and given that it is windows 2012 and after some googling, I realized that I need to activate the command line start menu since I can't access the windows.

  I insert the windows CD and using the option 'fix my PC' I managed to gain access to the command line so I tried to use the following command to activate the start menu

  bcdedit/set {bootmgr} displaybootmenu Yes

  but the operation did not succeed with the error below

  the boot configuration data store could not be opened.

  the volume of the file has changed on the outside so that the opened file is no longer valid.

  With kindness your advise how to solve this problem and please let me know if no need more details.

  Kind regards...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Corrupt Windows 2012 R2 Administrator profile

  Hi all

  I logged on my current server to run Windows 2012 r2 level one day and a new profile of the administrator is created.

  C:\Users\Administrator\Desktop, I see clearly my original files, but the current Administrator profile is directed to C:\Windows\System32\config\systemprofile\Desktop

  I tried:

  (1) deletion and recreation of the account administrator profile using another account has administrator (System Settings Advanced-> advanced-> user profile tab) rights.

  (2) to make scanning of virus/malware

  (3) Regedit to change the value or values of ProfileList (https://support.microsoft.com/kb/947215?wa=wsignin1.0)

  Nothing can make me "point back" to the original Administrator profile I want to have. Whenever I log into admin account, it just go directly to C:\Windows\System32\config\systemprofile to load the profile.

  The main problem is that I can't use desktop connection remote, which is crucial for my operations. The error dialog box pops up just indicating that Remote Desktop cannot be connected. I did a check and my ddns account works fine.

  Please do not asked to re - format or system restore. I had reasons not to do so.

  Anyone?  Help...

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Update error code 80246008 windows has encountered an unknown error

  IV recently corrected my windows update service, but I'm unable to install the important updates because I get an error code 80246008 windows has encountered an unknown error. I don't know what to do, ive tried microsoft solve this problem, iv also been on www.tweaking.com, I can't seem to find a solution, can anyone help?

  See the article below for more information and measures.

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  UTC/GMT is 21:59 Sunday, September 9, 2012

• When I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hi when I install windows 7 at the end of the expansion of windows files editing get an error "0x8007045D.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have found the error code.

  I suggest you refer to the suggestions by Andre Da Costa MVP responded on 27 April 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/cannot-install-Win7-error-0x8007045d/8cce76b4-25c6-4d07-ACB4-0dfa1ac3f4d3?DB=5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I'm not able to activate windows 7, its error to throw as a problem occurred when windows tried to activate. Error code: 0x8007007B.

  Hello

  I'm not able to activate windows 7, its throwing error as 'a problem occurred when windows tried to activate. "Error code: 0x8007007B '.

  Please let me know, what I should do with it.

  Below is the windows 7 validation data:

  «Verification code: 50»
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 2VJC9 - XBBR8-HVTHH
  Windows product key hash: k/l/EMDQdwK9OvdCkPtHG1YdosE =
  Windows product ID: 00392-918-5000002-85157
  Windows product ID type: 1
  Windows license Type: customer KMS
  The Windows OS version: 6.1.7601.2.00010100.1.0.004
  ID: {B2762B49-5475-40A7-9E1D-765F0BE3533F} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Enterprise
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.111025 - 1505
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-

  80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: allowed
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {B2762B49-5475-40A7-9E1D-765F0BE3533F}

  1.9.0027.0 6.1.7601.2.00010100.1.0.004 x 32 *-* -.

  -* - HVTHH00392-918-5000002-851571S-1-5-21-3116799435-357663476-

  3804916037INTEL_D945GNT_Intel

  Corp. NT94510J.86A.3528.2006.0208.1102

  minor = "3" / >20060208000000.000000 + 000FC613A07018400FC0409040

  9India Time (GMT + 05:30) Standard

  0 3

  achineData >1030000000FF1CE}">103Microsoft Office Enterprise

  200712ACD7202654E586fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066 -.

  6542114

  Version = "12" result = "103" / >

  Version = "12" result = "103" / >

  Version = "12" result = "103" / >

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Microsoft(r) Windows(r) 7, Enterprise edition
  Description: operating system Windows - Windows (r) 7, VOLUME_KMSCLIENT channel
  Activation ID: ae2ee509-1b34-41c0-acb7-6d4650168915
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00392-00170-918-500000-03-1033-7601.0000-2782012
  Installation ID: 008676579733265341196796947186687472240623681746864890
  Partial product key: HVTHH
  License status: Notification
  Reason for the notification: 0xC004F056.
  Remaining Windows rearm count: 2
  Trust time: 04/10/2012-13:30:10
  Please use /ato slmgr.vbs to activate and update information on KMS clients in order to update the values.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: MAAAAAEABAABAAEAAAABAAAAAQABAAEAJJTeG6qGkliqdkjkYl1 + q0qFqB7Y1Ow7

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC INTEL D945GNT
  FACP INTEL D945GNT
  HPET INTEL D945GNT
  MCFG INTEL D945GNT
  WDDT INTEL D945GNT
  ASF!   INTEL D945GNT

  The installed license is for a KMS Volume for Enterprise Edition client.

  If you use a machine society, contact your system administrator.

  If you are a user of MSDNAA, contact your issuing authority - colleges/universities.

  If you bought this detail of the license, you have purchased a counterfeit - Volume license cannot be sold separately.

• Agent Oracle 12 c deployment Windows 2012 R2 (x 64) fails with exit Code: 127

  EM 12 c Cloud control fails to add target Windows 2012 R2 host

  Description of the problem

  ---------------------------------------------------

  OEM12c box:

  Oracle Linux 5; EE database Oracle 11.2.0.3, OEM Cloud control 12 c - 12.1.0.3 + the last plug-ins

  Target area:

  Windows Server 2012 R2 Standard; Oracle 12.1.0.1 EE database

  Try to add the target host of Windows in the cloud of control and the prerequisites checks fail and cannot continue the deployment.

  OEM12c > Setup > add target > add target manually > add target host > Add Host

  Hosting platform

  mcsdbora2. ESRI.com Microsoft Windows x 64 (64-bit)

  Error

  Executing the command c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereq_stage/core/12.1.0.3.0/oui/bin/setup.exe - prereqchecker-silent - ignoreSysPrereqs - waitForCompletion - c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereqlogs prereqlogloc - PREREQ_CONFIG_LOCATION=c:/oracloud/ADATMP_2014-03-21_09-19-19-AM/prereq_stage/core/12.1.0.3.0/prereqs-J DORACLE_HOSTNAME = mcsdbora2.esri.com - DAGENT_PORT = 3872 - DALLOW_IPADDRESS = true on the host mcsdbora2.esri.com Failed oracle.sysman.top.agent_Complete entry point

  Cause: "Error Message: not available Exit Code: 127.

  The SGD log location:

  mcsoracloud.ESRI.com:/u01/app/Oracle/gc_inst/em/EMGC_OMS1/SYSMAN/agentpush//2014-03-21_10-25-47-AM/applogs/mcsdbora2.ESRI.com_deploy.log

  Target area: C:\oracloud\ADATMP_2014-03-21_09-19-19-AM\prereqlogs is empty.

  MOSC: My Oracle Support community

  EM 12.1.0.3 agent for Windows 2008 server x 64 bit installation fails

  "This is related to the issue being reported in note: 1631508.1 ' EM 12 c: Agent push the target MS Enterprise Manager 12 c Cloud control Windows host fails remote verification of prerequisites.

  "The version of cygwin has been recently updated on cygwin website.  This caused bugs: 18250066, which means that it is not possible currently to deploy an agent on windows if you are using the latest version of cygwin. »

  "Workaround in the meantime would be to do a silent install of the agent or install an older version of cygwin"

• Running Powershell script with ESXCLI commands via a scheduled task in Windows 2012 does not work.

  I'm trying to run a powershell script of a scheduled task in Windows 2012. The script calls the commands ESXCLI and ends with success (exporting to a CSV file) but the file has no data inside.  If I run the script manually without the scheduled task file has all the I expect to exit.

  I wonder if there is a framework with Powershell or a PSSnapin I need to add to the script for it to run via a scheduled task.  Has anyone done this before with the ESXCLI commands?

  panhvr - you may to something.  The process account that I use to run this script has only read-only access in vCenter.  I logged on the server I am running these reports with the process ID and tried to run the script.  He gave me errors indicating permission to perform the operations of esxcli was denied.

  I think we found the culprit!  I'll have this process ID in vCenter rights upward.

  Thank you all!

• CF10 on Windows 2012 & Apache Tomcat 7.0.42 mandatory update: cannot start Tomcat/CF

  Everything was OK with multiple instances of Tomcat and CF10 (large deployment of the CF here more than 15 years) but I ran the update mandatory on the first of the new instances of Tomcat/CF10 and Tomcat cannot complete its startup and CF10 is dead in the water.  He came to this line and crashes.

  October 14, 2013 14:48:03 org.apache.catalina.startup.HostConfig deployWAR

  "INFO: deployment of web application C:\Apache\330_CFMX1\webapps\cfusion.war archive.

  and stop...

  I put the Tomcat logging for the debug level.  Here is the result of the

  (1) - COMMON-DEMONS JOURNAL-

  [2013-10-14 14:48:02] [debug] (prunsrv.c:1679) The procrun log common demon [1096] initialized

  [2013-10-14 14:48:02] [info]  (prunsrv.c:1683) [1096] common demon procrun (1.0.15.0 64-bit) started

  [2013-10-14 14:48:02] [info]  (prunsrv.c:1596) Service [1096] term '330_CFMX1 '...

  [2013-10-14 14:48:02] [debug] (prunsrv.c:1374) Inside [3476] ServiceMain...

  [2013-10-14 14:48:02] [debug] (prunsrv.c:844) [3476] reportServiceStatusE: 2, 0, 0, 3000

  [2013-10-14 14:48:02] [info]  (prunsrv.c:1127) Check [3476]...

  [2013-10-14 14:48:02] [debug] (javajni.c:233) loading jvm [3476] 'C:\JDK7\jre\bin\server\jvm.dll '.

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option-Dcatalina.home=C:\Apache\Tomcat7.0 [0]

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [1]-Dcatalina.base=C:\Apache\330_CFMX1

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [2]-Djava.endorsed.dirs=C:\Apache\Tomcat 7.0\endorsed

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option-Djava.io.tmpdir=C:\Apache\330_CFMX1\temp [3]

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [4] - Djava.util.logging.manager = org.apache.juli.ClassLoaderLogManager

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option-Djava.util.logging.config.file=C:\Apache\330_CFMX1\conf\logging.properties [5]

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [6] - Dhttp.proxyHost = 167.131.0.12

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [7] - Dhttp.proxyPort = 8080

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [8] - Djava.class.path=C:\Apache\330_CFMX1\bin\bootstrap.jar; C:\Apache\330_CFMX1\bin\tomcat-ju li.jar

  [2013-10-14 14:48:02] [debug] (javajni.c:704) Out of Jvm Option [9] [1248]

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [10] - Xms384m

  [2013-10-14 14:48:02] [debug] (javajni.c:704) [1248] Jvm Option [11] - Xmx1024m

  [2013-10-14 14:48:02] [debug] (javajni.c:888) [1248] argv [0] = start

  [2013-10-14 14:48:02] [debug] (javajni.c:941) [1248] Java Worker thread started org/apache/catalina/boot/Bootstrap: hand

  [2013-10-14 14:48:03] [debug] (prunsrv.c:1186) Java [3476] started org/apache/catalina/boot/Bootstrap

  [2013-10-14 14:48:03] [info]  (prunsrv.c:1284) [3476] service started in 1279 ms.

  [2013-10-14 14:48:03] [debug] (prunsrv.c:844) [3476] reportServiceStatusE: 4, 0, 0, 0

  [2013-10-14 14:48:03] [debug] (prunsrv.c:1528) [3476] waiting for the worker in the end...

  [2013-10-14 14:48:39] [debug] (prunsrv.c:844) [1096] reportServiceStatusE: 4, 0, 0, 0

  [2013-10-14 14:49:39] [debug] (prunsrv.c:844) [1096] reportServiceStatusE: 4, 0, 0, 0

  [2013-10-14 14:50:40] [debug] (prunsrv.c:844) [1096] reportServiceStatusE: 4, 0, 0, 0

  [2013-10-14 14:51:40] [debug] (prunsrv.c:844) [1096] reportServiceStatusE: 4, 0, 0, 0

  [2013-10-14 14:51:47] [debug] (prunsrv.c:844) [1096] reportServiceStatusE: 3, 0, 0, 3000

  [2013-10-14 14:51:47] [info]  (prunsrv.c:943) [2768] stop service...

  [2013-10-14 14:51:47] [debug] (javajni.c:888) [3676] argv [0] = stop

  [2013-10-14 14:51:47] [debug] (javajni.c:941) [3676] Java Worker thread started org/apache/catalina/boot/Bootstrap: hand

  [2013-10-14 14:51:48] [debug] (prunsrv.c:990) Waiting [2768] for java jni worker stop finish...

  [2013-10-14 14:52:08] [debug] (prunsrv.c:1679) The procrun log common demon [3436] initialized

  [2013-10-14 14:52:08] [info]  (prunsrv.c:1683) [3436] common demon procrun (1.0.15.0 64-bit) started

  [2013-10-14 14:52:08] [info]  (prunsrv.c:687) [3436] stop service '330_CFMX1 '...

  [2013-10-14 14:52:09] [error] (prunsrv.c:708) [3436] cannot stop service '330_CFMX1 '.

  [2013-10-14 14:52:09] [error] (prunsrv.c:708) [3436] the service cannot accept control at this time messages.

  [2013-10-14 14:52:10] [info]  (prunsrv.c:716) [3436] stop service finished.

  [2013-10-14 14:52:10] [error] (prunsrv.c:1755) [3436] common Daemon procrun failed with the output value: 6 (impossible to stop the service)

  [2013-10-14 14:52:10] [error] (prunsrv.c:1755) [3436] the service cannot accept control at this time messages.

  (2) THE LOG STDERR OUTPUT-

  2013-10-14 14:48:02 common Daemon procrun initialized stderr
  October 14, 2013 14:48:02 org.apache.catalina.startup.ClassLoaderFactory validateFile
  WARNING: There is problem with directory [C:\Apache\Tomcat7.0\lib]: [false] isDirectory,: [false], canRead: [false]
  October 14, 2013 14:48:02 org.apache.catalina.startup.ClassLoaderFactory validateFile
  WARNING: There is problem with directory [C:\Apache\Tomcat7.0\lib]: [false] isDirectory,: [false], canRead: [false]
  October 14, 2013 14:48:03 org.apache.catalina.core.AprLifecycleListener init
  NEWS: APR based Apache Tomcat Native library that allows optimal performance in production environments was not found on the java.library.path: C:\Apache\330_CFMX1\bin. C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\JDK7\jr e\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32\WindowsP owerShell\v1.0\;
  October 14, 2013 14:48:03 org.apache.coyote.AbstractProtocol init
  INFO: Initializing ProtocolHandler ['http-bio-8101"]
  October 14, 2013 14:48:03 org.apache.coyote.AbstractProtocol init
  INFO: Initializing ProtocolHandler ["ajp-bio-8050"]
  Charge of org.apache.catalina.startup.Catalina October 14, 2013 14:48:03
  INFO: Initializing treated in 678 ms
  October 14, 2013 14:48:03 org.apache.catalina.core.StandardService startInternal
  INFO: Starting service Catalina
  October 14, 2013 14:48:03 org.apache.catalina.core.StandardEngine startInternal
  INFO: Starting the Servlet engine: Apache Tomcat/7.0.42
  October 14, 2013 14:48:03 org.apache.catalina.startup.HostConfig deployWAR
  NEWS: Deployment of web application C:\Apache\330_CFMX1\webapps\cfusion.war archive
  The service cannot accept control at this time messages.

  The service cannot be stopped

  No response from support CFInstall yet.

  Any input would be appreciated since nothing is going forward without this mandatory update

  Thank you

  Scott

  You say that you install on Windows 2012.  If you are using the latest installation programs (which adds support for Windows Server 2012 and Windows 8), the mandatory update is already integrated and does not need to be installed again.  If you were using one of the older installers, then you download the last being and use it.

  -Carl V.

• C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

  I can't open windows live mail and other programs that also many installers will not work for this reason.

  I get the following error:

  wlmail.exe - incorrect Image

  C:\Windows\System32\wship6.dll is not designed to run on
  Windows or it contains an error. Try to install the program using the
  the original installation media or contact your system administrator or
  the Publisher of the software to support

  I had to click OK 4 or 5 times to make it go away

  Many installers will not work because of this.

  System information:

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5610
  Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
  Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
  Motherboard: Hewlett-Packard, 358B
  Antivirus: Norton Internet Security, updated and activated

  Here's what I did to remedy:

  I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

  I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

  ( 1 copy the file in a place should be on my boot drive (c :) in my case))

  2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

  3 . Select repair your computer and press enter.

  4 . Select the option for command line

  type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

  type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

  type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

  If this does not work, you may need to replace syswow64 system32 in all the above instructions

• OfficeJet 6830 support for windows 2012

  If anyone can help with installation of the HP officejet pro 6830 drivers/software on Windows 2012.   The HP documentation says that 2012 Windows is supported, but here there are no drivers available for Windows 2012.  Windows 8.1 and 2008 drivers do not install in Windows 2012.  Any help is appreciated.

  @enruis

  Thank you for using the HP support forum. I sent you a private message. If you are unsure how to check your private messages please click here.
  Thank you
  Omar

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• TS140 install Windows 2012 on RAID 1

  Hello

  I intend to install a Windows Server 2012 on a TS140 using RAID 1 configuration.

  As I read in the manuals, the RAID is most often used with the CSM (compatibility Support Module), but as Windows 2012 supports UEFI, it could be used with the drivers.

  What is the recommended configurarion?

  In addition to the installation of the driver are the drawbacks in any configuration?

  Thanks in advance,

  Pablo Moleri

  I don't think that will give you all the advanced features.

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services