Windows 7 and server 2008

Similar Questions

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• For Windows 7 and Server 2008 Windows Firewall

  Hello

  I have a Server 2008 R2 as a DC and four workstations to Windows 7 (32).  I have a requirement to have the windows firewall on the computers of Windows7 desktop and Server 2008 R2 domain controller.

  At the level of the Windows 7 Desktop, I can GPEDIT. MSC and manually add a firewall

  On the DC 2008 Server, I can add to

  1. Group Policy Management, default domain policy, firewall
  2. Group Policy Management, default domain controller policy, firewall

  But I can't get Windows 7 and Server 2008 Firewall work, 'Domain' under the network profile retains by default "Public" or "not identified."

  Any Suggestions?

  Thank you

  B

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

  What is the FTP.EXE program included in Windows 7 and Server 2008 helps to connect in PASV Mode?

  I ask because I had a strange experience with her. First, I will mention that I did hours of research and found many articles stating that it does not work in XP/2000/Server 2003, but I found nothing for Windows 7 or Server 2008.

  I found some people who kept him at work and others who could not. I tried with Windows Firewall turned off and will be on and firewall rules created. Others said it is not supported and that I should use a third-party FTP client. I could make it work in Internet Explorer and Windows Explorer. I am well aware of the situation these options in Internet Explorer.

  Here are the best real, I could run from the command line on my PC Windows 7 (32 bit), but not on Server 2008 64 bit.

  Now, before someone comes and asks me to check the firewall, I want to mention that I tried more than five clients of third-party FTP Server 2008 and they all worked perfectly. In addition, from the same Server 2008 it worked fine in IE and explore.

  On Windows Server 2008:

  FTP client blocked on: 150 opening data of channel for the directory list.

  Windows 7:

  C:\Users\wxk1>Systeminfo | b/findstr/c: "Name of the OS" / c: "Version of the OS.
  Name of the operating system: Microsoft Windows 7 Enterprise
  OS version: 6.1.7601 Service Pack 1 Build 7601

  C:\Users\wxk1>FTP ftp.secureftp - test.com
  Connected to ftp.secureftp - test.com.
  220 - FileZilla Server version 0.9.39 beta
  220 - Written by Tim Kosse (* address email is removed from the privacy *)
  220, please visit http://sourceforge.net/projects/filezilla/
  User (ftp.secureftp - test.com:(none)): test)
  331 password required for test
  Password:
  230 logged on
  FTP > dir
  200 port command successful
  Data channel opening 150 to the directory list.
  -r - r - r - 1 ftp ftp bookstore.xml 1471 25 June 2007
  -r - r - r - 1 ftp ftp 279658 25 June 2007 hamlet.xml
  -r - r - r - 1 ftp ftp 80641 25 June 2007 hamlet.zip
  -r - r - r - 1 ftp ftp 2164 japanese.xml 25 June 2007
  -r - r - r - 1 ftp ftp 0 July 3, 2007 the new text Document .txt (2)
  -r - r - r - 1 ftp ftp 0 3 July 2007 new document texte.txt
  -r - r - r - 1 ftp ftp 4677 25 June 2007 nutrition.xml
  -r - r - r - 1 ftp ftp 8463 pigs.xml 25 June 2007
  -r - r - r - 1 ftp ftp 7581 25 June 2007 plants.xml
  drwxr-xr-x 1 ftp ftp 0 subdir1 June 25, 2007
  drwxr-xr-x 1 ftp ftp 0 subdir2 June 25, 2007
  226 transfer OK
  FTP: 697 bytes received in 0.01Seconds 46.47Kbytes / s.
  FTP >

  Also, I do not install a server FTP PASV will be IIS 7 or anthing like that, just try to connect to a server FTP PASV. Here is the test server that I used:

  http://www.SecureFTP-test.com/

  Type	FileZilla
  Address	FTP.SecureFTP - test.com
  Opening of session	test
  Password	test

  Details on using

  Chilkat provides this FTPS test account for all those wishing to test the secure FTP client functionality. You can connect to ftp.secureftp - test.com, connect as a 'test' with password 'test' and download that all files present on the server. The "test" account can also retrieve entries in the directory. There is, however, no downloading files on the server.

  Hello

  The question you posted would be better suited to the Technet community. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• HP Pavilion 15-E007TU Windows 7 and Server 2008 windows - drivers please

  Hi team,

  Could you please help me about windows 7 and windows server 2008 drivers for the HP Pavilion 15-E007TU.

  Kind regards

  Sri.

  Hello:

  You can use the W7 64 bit drivers for the 4540 s of HP Probook except audio and card reader drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio:

  Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  This model card reader driver should also work on your.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Query for windows small business server 2008 SP1

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hey AAAAAAAAAAAAtif

  It's an instance of vista installation

  Try the link below sbs forum

  This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  Walter, the time zone traveller

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• What version of esxi supports Windows 8 and Server 2012

  We have ESXi 5.0 and vSphere 5.0.

  I want to make the smallest upgrade for our VMware supports Windows 8 and Server 2012.

  What upgrade do I do?

  According to the matrix of product interoperability VMwarevCenter Server 5.0 (without update) supports ESXi 5.0 Update 1 guests too.

  André

• CS5 Windows 7 or Server 2008 and memory Question

  Hi guys,.

  I will get CS5 with the first, but before I do that I want to make sure that my computer has configured it optimal for her.

  I have a Toshiba Satellite with iCore 3 and 2 GB of ram. So to start than I did today, I ordered 8 GB of ram for it because it's maximum, but.

  My next step is the choice of OS, I have Win7 32 bit installed which I want to replace with Win7 64 bit, but I'll be better with Windows Server 2008 R2 for example?

  Thank you very much

  I don't want to violate your closing the thread but didn't you know "because I heard that CS5 is very quick about it (Server 2008) because he did not get the apps Windows 7 for"the masses"works in the background." All you have to do is follow any good guide adjustment to get rid of all the fluff of Windows 7.  Here is a starting point, it is a first draft that I use.

• How to set the time between workstations and Server 2008 R2

  Hello world

  I have problem with my Server 2008 R2

  all the workstations on my company doesn't synchronize the time on the domain controller

  I tried many ways to set up automatic synchronization via command prompt (Net time) and its does not work

  Please help me configure the time between the DC and the workstations

  Thank you

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Can I run Virtual PC Vista Home host and Server 2008 R2 comments?

  I am running Windows Vista family in a workstation with 2 GB of RAM, 1.2 Ghz Intel Core Duo. I would like to run Virtual PC to install Windows Server 2008 R2. What do you think it will work ok?

  Thank you.

  You * can *-really, the question is "Why would you?" because the server would be limited (severely) by bothe, VPC restrictions and those of the home edition. This is a configuration of (very) not supported.

  So not the areas and very limited display features.

  Many of you also on the low side of the RAM in the configuration or vice versa - I recommend at least 3 GB so that you can didicate at least 1 GB at the prompt, and still have room to move around in the host. You can allocate the guest at best - even if WIn7/ServerR2 is less expensive RAM than Vista.

• VMWare and Server 2008 R2 64-bit data recovery

  Hello

  Y at - it no problem using the plugin of VMWare and MS Server 2008 R2 (64-bit) data recovery?  Whenever I try to back up a virtual computer with the operating system 2008 R2 on it, she returns with the error:

  Failed to create the snapshot for VMName, error - 1 (unknown)

  The status message in the Panel said recent jobs:

  Cannot create a snapshot suspended because the snapshot creation operation has exceeded the time off I/O forholding in the frozen VM.

  When I use the same application to save a regular 32-bit version of 2008, it works very well.

  Any ideas?

  Thank you

  Windows 2008R2 isn't an entirely guest OS support on vSphere 4 and VMware Data Recovery.  We are aware of the problem and must lean into it by a version update - for now, 64-bit Windows 2008 R2 is not supported.

• PE1850 4e/Si and Server 2008

  Anyone tried this?  Are raid drivers for the 4th if on the dvd?  I was wondering if this is possible since the server MSFT HCL explains that the 4th if is not supported in Server 2008.

  
  

• Windows Small Business Server 2008 starts after the full restoration of the PC

  I need help URGENT here. My company has a HP Vantage 2 hard drives with Windows 2008 Server. C and D, both have important data on them. D drive has become corrupted over the last weekend, and as a result, the server was very slow and data on the d drive was inaccessible. Unfortunately, D drive was somehow part of the boot sequence, and when I took it out, the computer would not start at all.

  Well made to purchase two new drives of 1 TB and replace the old records with them (we need the extra space anyway) and I did a complete system restore by booting from the windows installation CD and choose the external USB hard drive, we had that we were using for daily backups. Restore seemed to be going great, it took almost 3 hours and when he was done he had some problems.

  1 when the external USB drive was plugged and the system tried to start, it would give an error message and would not continue even if the BIOS was said to NOT boot from the USB key.

  2. when the drive has been disconnected, windows seems to start normally, I would still get up to a point where I had a mouse cursor that I could move on a black screen, but then the computer would suddenly reboot! Like someone hitting the reset button. I can hear the drives stop when it happens. The same thing happens with no failure or last known good configuration mode.

  It is a major problem because we do not have Internet or files. I wish there was a phone number that I can call for assistance. I would be happy to pay for it! even if it is a third party.

  I saw that Microsoft had "pay per incident" support but it just says: it is $ 260, what for? An hour? A case? A month?

  Any help would be appreciated

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Install PeopleTools 8,53 Linux question: Windows Client and server Linux

  People,

  
  Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  Now, I'm going to implement database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually using Starter named PT853 Oracle database instance. We need run Data Mover script in a Windows Client computer to populate the PeopleSoft database instance in Linux Sever machine.

  Suppose that:

  VM1: Server - Oracle Linux 5 Machine
  VM2: Client - Windows XP

  Nicolas has this tutorial:

  http://Gasparotto.blogspot.com/2008/01/on-PeopleSoft-road-PeopleSoft-database_10.html

  Step 15 to step 23, Nicolas does not explain how to connect VM2 (client) with VM1 (server) and load some data from to VM1 VM2.

  My questions are:

  First of all, we need to install PeopleTools 8.53 Windows version on the Client Windows XP when installing PeopleTools 8,53 Linux version on the machine Oracle Linux 5 Server?

  Second, how to connect with VM1 VM2, and then load to VM1 VM2 data?

  
  Thank you.

  My computer's processor 64-bit, so 32-bit install PeopleTools or Oracle database server, there must be some mistakes!

  No errors. 32 applications and processes will be running on 64-bit Windows. PeopleTools client programs (PSIDE, etc.) require the Oracle 32-bit client

  What are the 'Oracle customer' in Windows machine?

  'Oracle customer' is the "connectedness agenda" used by Oracle to connect to the Oracle database.

  You mean besides install PeopleTools 8.53 in the Windows client computer, still need to install the Oracle database server in Windows client machine?

  No, not the database server Oracle, just the Oracle client. You can download it separately from delivery for your client operating system.