PE1850 4e/Si and Server 2008

Similar Questions

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• For Windows 7 and Server 2008 Windows Firewall

  Hello

  I have a Server 2008 R2 as a DC and four workstations to Windows 7 (32).  I have a requirement to have the windows firewall on the computers of Windows7 desktop and Server 2008 R2 domain controller.

  At the level of the Windows 7 Desktop, I can GPEDIT. MSC and manually add a firewall

  On the DC 2008 Server, I can add to

  1. Group Policy Management, default domain policy, firewall
  2. Group Policy Management, default domain controller policy, firewall

  But I can't get Windows 7 and Server 2008 Firewall work, 'Domain' under the network profile retains by default "Public" or "not identified."

  Any Suggestions?

  Thank you

  B

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

  What is the FTP.EXE program included in Windows 7 and Server 2008 helps to connect in PASV Mode?

  I ask because I had a strange experience with her. First, I will mention that I did hours of research and found many articles stating that it does not work in XP/2000/Server 2003, but I found nothing for Windows 7 or Server 2008.

  I found some people who kept him at work and others who could not. I tried with Windows Firewall turned off and will be on and firewall rules created. Others said it is not supported and that I should use a third-party FTP client. I could make it work in Internet Explorer and Windows Explorer. I am well aware of the situation these options in Internet Explorer.

  Here are the best real, I could run from the command line on my PC Windows 7 (32 bit), but not on Server 2008 64 bit.

  Now, before someone comes and asks me to check the firewall, I want to mention that I tried more than five clients of third-party FTP Server 2008 and they all worked perfectly. In addition, from the same Server 2008 it worked fine in IE and explore.

  On Windows Server 2008:

  FTP client blocked on: 150 opening data of channel for the directory list.

  Windows 7:

  C:\Users\wxk1>Systeminfo | b/findstr/c: "Name of the OS" / c: "Version of the OS.
  Name of the operating system: Microsoft Windows 7 Enterprise
  OS version: 6.1.7601 Service Pack 1 Build 7601

  C:\Users\wxk1>FTP ftp.secureftp - test.com
  Connected to ftp.secureftp - test.com.
  220 - FileZilla Server version 0.9.39 beta
  220 - Written by Tim Kosse (* address email is removed from the privacy *)
  220, please visit http://sourceforge.net/projects/filezilla/
  User (ftp.secureftp - test.com:(none)): test)
  331 password required for test
  Password:
  230 logged on
  FTP > dir
  200 port command successful
  Data channel opening 150 to the directory list.
  -r - r - r - 1 ftp ftp bookstore.xml 1471 25 June 2007
  -r - r - r - 1 ftp ftp 279658 25 June 2007 hamlet.xml
  -r - r - r - 1 ftp ftp 80641 25 June 2007 hamlet.zip
  -r - r - r - 1 ftp ftp 2164 japanese.xml 25 June 2007
  -r - r - r - 1 ftp ftp 0 July 3, 2007 the new text Document .txt (2)
  -r - r - r - 1 ftp ftp 0 3 July 2007 new document texte.txt
  -r - r - r - 1 ftp ftp 4677 25 June 2007 nutrition.xml
  -r - r - r - 1 ftp ftp 8463 pigs.xml 25 June 2007
  -r - r - r - 1 ftp ftp 7581 25 June 2007 plants.xml
  drwxr-xr-x 1 ftp ftp 0 subdir1 June 25, 2007
  drwxr-xr-x 1 ftp ftp 0 subdir2 June 25, 2007
  226 transfer OK
  FTP: 697 bytes received in 0.01Seconds 46.47Kbytes / s.
  FTP >

  Also, I do not install a server FTP PASV will be IIS 7 or anthing like that, just try to connect to a server FTP PASV. Here is the test server that I used:

  http://www.SecureFTP-test.com/

  Type	FileZilla
  Address	FTP.SecureFTP - test.com
  Opening of session	test
  Password	test

  Details on using

  Chilkat provides this FTPS test account for all those wishing to test the secure FTP client functionality. You can connect to ftp.secureftp - test.com, connect as a 'test' with password 'test' and download that all files present on the server. The "test" account can also retrieve entries in the directory. There is, however, no downloading files on the server.

  Hello

  The question you posted would be better suited to the Technet community. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• HP Pavilion 15-E007TU Windows 7 and Server 2008 windows - drivers please

  Hi team,

  Could you please help me about windows 7 and windows server 2008 drivers for the HP Pavilion 15-E007TU.

  Kind regards

  Sri.

  Hello:

  You can use the W7 64 bit drivers for the 4540 s of HP Probook except audio and card reader drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio:

  Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  This model card reader driver should also work on your.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• How to set the time between workstations and Server 2008 R2

  Hello world

  I have problem with my Server 2008 R2

  all the workstations on my company doesn't synchronize the time on the domain controller

  I tried many ways to set up automatic synchronization via command prompt (Net time) and its does not work

  Please help me configure the time between the DC and the workstations

  Thank you

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Can I run Virtual PC Vista Home host and Server 2008 R2 comments?

  I am running Windows Vista family in a workstation with 2 GB of RAM, 1.2 Ghz Intel Core Duo. I would like to run Virtual PC to install Windows Server 2008 R2. What do you think it will work ok?

  Thank you.

  You * can *-really, the question is "Why would you?" because the server would be limited (severely) by bothe, VPC restrictions and those of the home edition. This is a configuration of (very) not supported.

  So not the areas and very limited display features.

  Many of you also on the low side of the RAM in the configuration or vice versa - I recommend at least 3 GB so that you can didicate at least 1 GB at the prompt, and still have room to move around in the host. You can allocate the guest at best - even if WIn7/ServerR2 is less expensive RAM than Vista.

• VMWare and Server 2008 R2 64-bit data recovery

  Hello

  Y at - it no problem using the plugin of VMWare and MS Server 2008 R2 (64-bit) data recovery?  Whenever I try to back up a virtual computer with the operating system 2008 R2 on it, she returns with the error:

  Failed to create the snapshot for VMName, error - 1 (unknown)

  The status message in the Panel said recent jobs:

  Cannot create a snapshot suspended because the snapshot creation operation has exceeded the time off I/O forholding in the frozen VM.

  When I use the same application to save a regular 32-bit version of 2008, it works very well.

  Any ideas?

  Thank you

  Windows 2008R2 isn't an entirely guest OS support on vSphere 4 and VMware Data Recovery.  We are aware of the problem and must lean into it by a version update - for now, 64-bit Windows 2008 R2 is not supported.

• Windows 7 and server 2008

  Two weeks ago, that I update 25 laptop from XP to Windows 7. They were already joined to the domain on the server with a given name. When I upgraded, I appointed the namesake. I saw that there were names duplicated in Active Directory, so I deleted the duplicate name. Should reflect on the early naming scheme. So now I get this error when you try to connect to the domain account:

  The database of security on the server doesn't have a computer account for this workstation trust relationship

  However, I can sign in for the computer account. Is there to remedy this?

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Windows Server 2008 SP2 remote management for the

  I am trying to install windows on windows server remote management 2008, but it continues to tell me that this update is not appy to this system.  I'm trying to manage windows Server 2008 Windows server 2012.  I have the updated 2012 in place like active directory and Server 2008 as a file server.  I like to leave the file as a unit without a head server. Any help would be great!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• easy printing in windows server 2008, how it works

  Dear techs... Let me see how well you guys are compared to the expert exchange... How do we really get printer to work via Remote Desktop RDP redirection.

  I tried basically every thing, but it doesn't seem to work well.

  Please explain, and I'll explain my methods

  no errors in the event log

  my xp machine connects to Server 2008 and two machine operators are identical, but it still redirect... what could be the problem?

  even if you the subject says easy printing, I don't use this feature yet... Why normal redirection does not work?... versions of windows: xp and server 2008. the printer connected via a usb cable.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• My master wants me to load windows server 2008 on our existing server. (It is not an upgrade).

  He wants our Server 2003 our secondary server and Server 2008 be our principal. He also wants to migrate our Server 2008 our announcement of the 2003 server. I would like step by step instructions. Can you help me?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Wireless user is unable to connect to Server 2008 r2

  I just migrated to Server 2003 r2 to Server 2008 r2 in my company. I have a pretty good work for all users of wired & wireless on Server 2003 r2, but once I upgraded to the counter and Server 2008 r2 user wireless can not connect to the server but Wired user works very well.

  I realize that if the user wireless connect the wireless name is showing field name... Yes, I can connect to the server. But, if the wireless name showing SSID then failed to connect to the same server not ping IP of the server also no response. I tried manually inside the server IP in favorite DNS server also failed.

  Help, please!

  Hello

  I suggest you to ask your question in the following TechNet Forum for better support.

  Windows Server 2008 R2 network.

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2networking/threads

  I hope this helps.

• Server 2008 statement incorrect drive size

  I have the following problem on 2008 Server and Server 2008 R2 (didn't happen on the Server 2003 or even 2012) of the virtual computer where space C:\ drive is not well seen by the virtual machine until after a reboot. The player is put into operation end. After a restart of the server correctly to see disk space again and is very well for a few weeks to a month, but then randomly happen. As you can see in the screenshots below Windows Explorer and disk management are the C:\ as having only 795 MB remaining but WinDirStat reports there should be 15.8 GB. After the restart, all of the 15.8 GB is reported correctly.

  Any ideas?

  Incorrectly display disk space:

  

  Analysis of results of the reader WinDirStat:

  

  Disk management view:

  

  Finally, I came to a resolution of this problem. Stop and restart the VSS service (Volume Shadow Copy service) instantly get all the disk space missing (from my experience that it is anywhere between 5 to 15 GB). I hope someone else finds this useful.

  Thanks again for the help guys.

• No driver LAN detected on the Satellite Pro U400 and Tecra A10 Win Server 2008

  Hello

  We use in our coupany a Windows Server deployment with Windows Server 2008 boot.wim to the installation of our computers.

  I have ad driver marvell netwok our Boot.wim, but after starting the network, I have an error message because the network adapter does not work.

  We install workstations HP, VMware servers with it without problem, but we can't to install computers of latest toshia!

  We have 10 to 15 computers to install a week and we need to use this tool.

  I try to ad Intelshipset utility drivers without success.

  We have this problem with all models of just sitting Pro U400 PSU45E 10 years!

  Is there any other driver to install?
  ANYTHINK to set up?

  Best regards

  Hello

  As far as I know, Toshiba offers a few drivers are included in the recovery image and it is unclear to me that there are different drivers LAN for the specific model of laptop.
  All these drivers are available if someone wants to install a clean version of the operating system and do not want to use the factory settings.

  Have you created your own ghost image to SP U400 with all the necessary applications for the company's employees?