Windows 7 Anytime Upgrade key does not

Similar Questions

• Windows anytime upgrade key does not work

  After trying to upgrade my OS Windows 7 Home Premium to Windows 7 Professional, I received the following message:

  
  
  "Enter a different upgrade key
  The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade.  Enter a different key. »
  
  
  Just to be sure, I tried upgrading several times, but got the same message.
  Due to manufacturing defects, my laptop had to be repaired three times.  The motherboard has been replaced twice, the hard drive has been replaced three times and the processor once.  In fact, just a year last month, it still does not properly.  I bought the Windows Anytime Upgrade [upgrade to Windows 7 Professional to Home Premium] at the same time that I buy my laptop. Each time, except this time, I got to spend my OS.
  The operating system on my laptop is now Windows 7 Home Premium [SP1]
  Another thing, I bought this laptop until I moved to the United States to Asia.  If this may have something to do with the problem that I am facing?
  In any case, I hope you can help.  It is difficult to really buy a lemon manufacturing refuses to stand behind and now having this issue, where I can't upgrade the OS that I bought.
  I hope you can help.
  Thank you in advance.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and maintenance records

  and the difficulty of corrupted data, the tool is listed under kb947821 we find at the following link

  http://support.Microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  http://msdn.Microsoft.com/en-GB/academic/bb250622.aspx - License of MSDN AA

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• I have windows vista but CD Key does not work so that was ok until now

  The President complied,

  I have the authentic drive of Microsoft Windows Vista, but now the product key does not work as it was working before and I use it for the past two years. Mr President, I am facing a very big problem my windows stops automatically after 30 days, please fix this.

  Hello ElumBuneri,

  As you stipulate that Windows stops working within 30 days, I'll assume that you have been unable to activate your copy of Windows. You receive the error message probably is "key to product already in use"? If this is the case, a simple phone call will solve the problem.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• My Windows 8 Pro product key does not work to activate my copy of Windows 8 Pro

  My work of Windows 8 product key is not

  Step 1: Yesterday I bought a new hard drive clean Virgin and I bought Windows 8 Pro at a local big-box store. It is a complete copy. Not an upgrade.

  Step 2: I removed all the other my system HARD drives and installed Windows 8 on the new hard drive. The system asked product key. I went in and everything installed perfectly. Windows works fine. I like it.

  Step 3 However, when I went to 'activate' my copy of Windows 8 and I enter this SAME product key, that I used to install I get the following message "this key did not work. Check it out and try again, or try a different key. "I repeated this step at least 4 different times after the reboot. Still does not accept it.

  Question: I can not activate my new copy of Windows 8. How can he accept my key for installation and then NOT accept for activation?

  Help!

  JWM

  The problem was solved!

  Step 1: I called Microsoft support MICRSOFT (800)

  Step 2: I navigate through all voice menus for installation tech Support for Windows 8

  Step 3: I explained the problem to the technology (Jerry)

  Step 4: The tech had me find the search function and he get a function of 4 letters (I forgot the command). I executed the function, and I got to a screen that asked me to enter a code for the Microsoft Technical Professional. I entered the 8 digit code that the tech provided for me.

  Step 5: I get to a new screen and technology (Jerry) explains that I am turned on.

  Step 6: I restart my PC and I go to the 'System' page in the control panel and it shows that my copy of Windows 8 is activated!

  The Tech explained that my copy of windows is an "upgrade" version (it isn't) and that is why I got the sentence. I explained repeatedly that it was a COMPLETE copy.  Finally, I dropped my 8 Windows has been activated.

  Call the technical support and good luck!

• Brand new Windows XP Professional SP3 key does not

  I fell right on my old CD-ROM Windows XP Professional SP1 and my new key SP3. I installed XP on my old Compaq ProSignia 165 to make it work again, and when it prompted me to insert the key, I tried my SP3 key. It didn't work as I thought, so I used the key out of my Dell OptiPlex 170 L to install because I still use it a lot. Then I threw SP3 on it and downloaded the Microsoft program change key and tried. It does not accept it, nor any of my other XP Pro key. Everything except my netbook works Pro, so what is happening here? I have to do in the registry or what? I'm starting to get fact TIC TACS in this thing, because it does not appear WHAT I put on it. Please help me, because I'm starting to lose here.

  Try the Activate by phone:

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  If the activation of the Internet does not work, then see the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 can be confused with the letter B, etc.).

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Accidentally, I bought the Windows 7 Professional upgrade and does not have an earlier version of Windows

  Hello

  Recently I bought Windows 7 Professional upgrade because of the student discount, I had about it, not realizing it was only an upgrade. I do not have an earlier version of windows, and so now I have a copy of UN activated Windows. My question is can I buy an old vista or XP and just plug this code? It is said the upgrade works from previous versions and because I already bought the upgrade I look forward to having to buy a brand to the copy of windows 7, if I buy xp or vista.
  Thanks for your help.
  -Bill

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  Note: You will not have to activate the previous license, just install.

  Option 2:

  Call the Activation Center and explain your situation.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• Why is my Windows 7 Ultimate pro. key does not?

  I installed 7ultimate on this laptop as an 'upgrade' but the Pro.Ke. does not work, why?

  the keys are specific edition.

  a pro key only works on pro. If you have ultimate you need a key.

• Windows 8 Pro product key does not work

  I get this error message: "this product key has not worked. Please check it and try again"

  
  
  Just bought the Windows 8 Pro in Windows 7 home premium upgrade.  Fresh installed from a USB...

  Got mine sorted... I called customer service... you guys can check it out here for your countries respective http://support.microsoft.com/gp/customer-service-phone-numbers

  So yes... to explain the situation, they will provide you with this diagnostic package... click on the package, reset your comp... and you should be able to activate your shiny new operating system... they were quick to fix my problem... Bravo to them... hope it helps = D

  Method for those who don't want phone customer service:
  Your key is a unique key for update... meaning that it will not allow a new installation... unless you do the workaround of Windows 7 registry.

  You must open a run dialog box and type: "Regedit".

  Then I located this key:

  HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE /.

  And find one called "MediaBootInstall.

  Double-click that and change a 1 to 0.

  Then open cmd as administrator

  Type the command "slmgr /rearm.

  You will get a restart of your computer messge.

  Restart

  Then when you restart your computer, you open a dialog box run again and type "slui.exe 3" and it will allow you to enter your product key and activate :)

• EliteBook 840 G2: Elitebook after Windows 10 Upgrade keys does not

  Hi on board,

  I'm a 840 Elitebook brand new last week with Win7 and directly upgraded to Win10 64-bit yesterday. It works although until now unless there is a big thing, some keys (FN + F9 for example) are not executed. You know, those little keys most of us use a lot to adjust the brightness or volume.

  In my case, there is the problem with FN + F8, F9 and F10 (off mic, down screen brightness and the brightness of the screen to the top). Other keys work fine (for example, volume).

  Someone at - it a specific link to a Win10 driver for this problem. I was looking on the half-hour but can't find anything (especially not the solution for Win8 proposed with the hot key driver). It might be my problem due to the fact that I'm not used to the new page from HP.

  Any help is appreciated a lot,

  Since the Switzerland

  Hello here is the driver for the keyboard shortcut support, you can try on Elitebook 840 G2:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7343205&swItemId=ob_142323_1&swEnvOid=4132

• After reinstalling Windows Vista, the product key does not work

  Hello, I had to reinstall windows vista home Premium x 64 on my laptop. I was wondering why my product key on my laptop is not working and if there was a way to avtivate using a phone.

  Hello

  This can help you:

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Reinstall Windows 7 Home Prem key does not

  I had somebody asked me to reinstall their laptop (A Toshiba with W7HP) I used Magic Jelly Bean to obtain the product key, because the COA on the bottom of the laptop was unreadable, it had been rubbed so much you can only see things X 15-#.

  Now, I did a reinstall with Microsoft's OEM disc. Trying to activate, I get "Windows 7 Home Premium product key you typed is invaild for activation"

  I copied and pasted so I know that I didn't type.

  What are my choices? Do I have to buy a new product key?

  You use the OEM SLP key which can not be activated. The only way that works an OEM SLP key is with the recovery partition or a Toshiba recovery media. (it itself active) You will need to use the key from the COA or install it from the recovery media.

  See the response from André for more information.
  Additional information:
  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Windows 8 pro activate windows, the product key does not

  Windows 8 pro installed on a new hard drive very well. now the pc settings come to activate windows and my product key does not work. any further suggestions?

  You upgraded to Windows 8, but did not have an earlier version of Windows Installer (error 0xC004F061)

  If you see error 0xC004F061 when you try to activate Windows 8, this means that you are using a product key for an upgrade of Windows 8 version and a previous version of Windows wasn't on your PC when Windows 8 was installed. To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

• 2015 retail Windows 7 Anytime Upgrade

  A DETAIL will modernize key (new/sealed) bought today (March 2015) always updated and load correctly?  I have a machine that still has the Starter and upgrade to the Home Premium edition.  Microsoft will always honor the upgrade?

  A DETAIL will modernize key (new/sealed) bought today (March 2015) always updated and load correctly?  I have a machine that still has the Starter and upgrade to the Home Premium edition.  Microsoft will always honor the upgrade?

  Yes, it will still work.

  If the Windows 7 Home Premium license you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Starter to Windows 7 Home Premium. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation).

  Click Start, type Anytime Upgrade, click on the option to enter a key, enter the key of Windows 7 Home Premium, when asked, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Home Premium files the stored settings and programs.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look in the package and the maintenance of records and fix corrupted data, the tool is listed under kb947821 it is located at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows 7 Anytime upgrade failed

  Windows 7 Anytime upgrade failed after my business card has been charged.

  Who can I call to get a new upgrade key?

  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.

  You can use the same key and try the upgrade again. Click Start, type: Express upgrade
  Press enter on your keyboard
  Click on the option "enter a product key.

  wait for the verification of the key, to accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are needed), your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade , a windows will pop up by notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7, your files, programs and settings retained.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:
  Download the hotfix that contains a tool called CheckSUR, this tool will look in the package and the maintenance of records and fix corrupted data, the tool is listed under kb947821 it is located at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:
  1. go in user accounts in Control Panel
  2 change user account control settings
  3. pull the slider to the level as low as possible
  4. restart the PC
  5. pass by the "Anytime Upgrade" as usual

  If you lose your product key, you can return to www.windows7.com/getkey and sign in using the "Sign In" link in the upper right of the page.  This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

• Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

  Hello
  The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
  Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

  Satellite A500 - 134

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.