Windows 7 - Audit Mode

Similar Questions

• Having problems with maintaining device drivers loaded on Windows 7 audit mode

  Trouble in paradise. I'm working on new images of Windows 7 and we're having problems that new pilots appear after the computer has been deployed. I extend to the computer in audit mode and either use an answer file to add drivers or add them manually using pnputil. I add drivers for 5 different Dell Optiplex computers. When you use the answer file the computer back mode audit on this computer, and drivers have been installed. After checking the Device Manager, everything is in place. I also checked the Driverstore folder to make sure they have been installed, they. But when I finished the process sysprep, the image on your computer and place it on another computer, it does not see the new drivers. I still have to add them manually. I did it on five computers with the same result so I know that the pilots were initially loaded correctly. For some reason any after sysprep, it seems to lose track of the path to the drivers when the computer starts in windows setup mode. Once installation is complete, the same missing drivers in Device Manager are still missing. Even if they were there to audit mode. If I send the device missing in Device Manager the driverstore in research, he finds the driver without problem. Here's what I use for sysprep:

  C:\Windows\System32\Sysprep\sysprep /audit /reboot /unattend:C:\Windows\System32\Sysprep\imagetest.xml

  And then run the oobe and generalize the windows sysprep interface options to stop out of audit mode

  I hope that I do just something wrong, it's simple.

  GOOSE

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows cannot complete the installation during the passage in audit mode

  Hi all

  I was recently trying build a Windows 7 image for use in a high school lab.
  scenario until now:

  1.) configure WDS
  2.) use DISM to add any drivers necessary for the boot.wim and install.wim file
  3.) copied the files to the WDS server
  4.) installed Windows 7 x 64 enterprise on computer in the lab.
  (5.) to the menu screen post install (where it asks you to enter a user/computer name), I pressed Ctrl + shift + f3 to put the computer in audit mode to start putting in place a default profile.
  6.) after the reboot, I get the following message:
  "Windows could not complete the installation. "To install windows on this computer, restart the installation.

  After reading several posts I changed the SATA mode in the bios in legacy/IDE and tried installing again with the same result.

  I tried to install with a new download windows 7 directly from the DVD without integrated drivers, with the same results.

  I used DBAN to completely erase the hard drive and then tried installing twice with the same result.

  I tried to install it on another computer in the lab and still not received the same message.

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I recommend posting your question in the following TechNet Forum:

  http://technet.microsoft.com/en-us/ms772425.

• Win 7 Audit Mode, BCDBOOT & ImageX

  I have created a Windows 7 Pro image in audit mode and captured by using imagex to a drive USB of PE3. When he imaging on the machine and running bcdboot C:\windows it has two entries in startup but without run bcdboot system will not work. No idea why? If so any ideas how to get around him.

  I understand that yes I can get him to go into MSConfig and remove one of the entries and make the changes permanent, but would like to know why its happening in the first place.
  
  Should I be anything except when you run ImageX?

  I need to make a recovery CD in case the person, I'll send the machine manages BA * s it upward and can easily rebuild without entry or if possible confusion.

  Hi,

   

  The question you posted would be better suited in the TechNet Forums.

  I suggest you to ask your question in the below link:

   

  Windows 7 Installation, Setup, and deployment:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

   

  I hope that the information above helps you.

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Satellite L755 - failures of recovery appeared in audit mode

  Chess appeared in audit mode in the 4 DVDs + environment (DVD 5) made 2 attempts throughout the DVD s, all DVDs have folders and files stored on it.
  no more impressed with a machine which is only 2 weeks, I could take a chance and guess the stuff on the DVD s is 'kosher', but not knowing what's out there ' if 'push comes to shove' probably not a good idea!

  Copied output error, but I first thought I pose/position the question and see if anyone out there can give me some advice
  JIZJAZZ

  Can you please tell us what blank media are you using?
  Do you use DVD + R or R media?

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• How to enable Media Player in Windows XP safe mode

  Does anyone know how to enable Windows Media Player in Windows XP safe mode? I sound activated in safe mode but Windows Media Player does not work, it will not only open and there's nothing in Task Manager which shows that it is running in the processes list. It depend on what services? Media Player works fine in normal mode, but only in safe mode.

  Any suggestion would be appreciated

  Hello Victor,.

  I don't think that it is possible to get Windows Media Player to work in Mode safe as it does start normally.
  I suggest that you work on the main problem which is screening at the blue start of your machine. I suggest you post a thread on our repair system and the recovery location here:
  http://answers.Microsoft.com/en-us/Windows/forum/system?page=1&tab=no

• PAGE_FAULT_IN_NONPAGED_AREA error, I can't yet start windows in safe mode, I can't really afford to lose everthing on my laptop

  I get error page_fault_in_nonpaged_area, I can not even to start windows in safe mode, I can't really afford to lose everthing on my laptop, it did not come with any disk, I have not installed new hardware, only the new software is Google Chrome with a few Add-ons for it, laptop Dell with Windows XP Please help

  I don't really know what to do, I can't access the windows at all, please help

  Hello

  To retrieve your documents, you can download a program called knoppix that you can put on a cd. Then boot on this cd. They copy the documents on another device. Here's a link for you help do - option 3

  MyPcHealth - free tools

• I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

  I can connect with the Administrators account without starting windows in safe mode and if yes, how?

  If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

  Thank you, Andre

  If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
  Most Microsoft Valuable Professional

• How can I start windows in safe mode if I have the error status code 2000-142 7?

  I NEED TO KNOW HOW TO START WINDOWS IN SAFE MODE, I CAN GO TO THE INSTALLATION PAGE BUT ONLY THEN, HOW I START ON SAFE MODE?

  Hello

  Looks like your hard drive is defective or has failed.

  Use the following steps to confirm that.

  Hard drive:

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• Computer crashes microsoft windows security audit event id 4624.

  Hi all.. Im having some problems with my computer hanging while I listen to music these days... I looked in the Windows Event Viewer and that's what I found with the corresponding times. It's only annoying of any help that you can suggest would be great. I'm using Windows 7 64 bit

  Error description:
  An account has been connected successfully.

  Object:
  Security ID: SYSTEM
  Account name: MATT-PC$
  Domain account: WORKING group
  Logon ID: 0x3e7

  Logon type: 5

  New logon:
  Security ID: SYSTEM
  Account name: SYSTEM
  Account domain: NT AUTHORITY
  Logon ID: 0x3e7
  Logon GUID: {00000000-0000-0000-0000-000000000000}

  Process information:
  Process ID: 0 x 204
  Process name: C:\Windows\System32\services.exe

  Network information:
  Name of the workstation:
  Source network address: -.
  Source port: -.

  Detailed authentication information:
  Logon process: Advapi
  Authentication package: negotiate
  Transited Services: -.
  Package Name (NTLM only): -.
  Key length: 0

  This event is generated when a session is created. It is generated on the computer that was consulted.

  The fields of the object indicate the account on the local system that requested the opening of session. It is more often a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.

  The logon type field indicates the type of logon that occurred. The most common types are 2 (interactive) and 3 (network).

  The new session fields indicate the account for which the new logon was created, which is the account that was logged.

  The network fields indicate where source opening of remote session request. Workstation name is not always available and may be left blank in some cases.

  The authentication information fields provide detailed information on this specific logon request.
  -Connection GUID is a unique identifier that can be used to correlate this event with a KDC event.
  -Transit services indicate which intermediate services participated in this logon request.
  -Name of the package indicates what auxiliary Protocol was used among the NTLM protocols.
  -Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

  Details

  - < event="" xmlns=" http://schemas.microsoft.com/win/2004/08/events/event ">"
  -< system="">

    < provider="" name=" Microsoft-Windows-Security-Auditing " guid=" {54849625-5478-4994-A5BA-3E3B0328C30D} ">

    < eventid="">4624

    < version="">0

    < level="">0

    < task="">12544

    < opcode="">0

    < keywords="">0 x 8020000000000000

    < timecreated="" systemtime=" 2009-12-10T00:50:23.253155100Z ">

    < eventrecordid="">9073

    < correlation="">

    < execution="" processid=" 540 " threadid=" 1596 ">

    < channel="">Security

    < computer="">mast - PC

    < security="">

   

  -< eventdata="">

    < data="" name=" SubjectUserSid ">S-1-5-18

    < data="" name=" SubjectUserName ">MATT-PC$

    < data="" name=" SubjectDomainName ">WORKING GROUP

    < data="" name=" SubjectLogonId ">0x3e7

    < data="" name=" TargetUserSid ">S-1-5-18

    < data="" name=" TargetUserName ">SYSTEM

    < data="" name=" TargetDomainName ">NT AUTHORITY

    < data="" name=" TargetLogonId ">0x3e7

    < data="" name=" LogonType ">5

    < data="" name=" LogonProcessName ">Advapi

    < data="" name=" AuthenticationPackageName ">Negotiate

    < data="" name=" WorkstationName ">

    < data="" name=" LogonGuid ">{00000000-0000-0000-0000-000000000000}

    < data="" name=" TransmittedServices ">-

    < data="" name=" LmPackageName ">-

    < data="" name=" KeyLength ">0

    < data="" name=" ProcessId ">0 x 204

    < data="" name=" ProcessName ">C:\Windows\System32\services.exe

    < data="" name=" IpAddress ">-

  Thank you for any information you can provide... im a noob when it comes to such things.

  Hi Mkress,

  Welcome!

  You can get this error if Windows Error Reporting Service does not start, try to restart the service on the computer and check if the problem persists or not, follow the steps below to start the service:

  1. click on start.

  2 type Services in the start search.

  3. look for Windows Error Reporting Service in the list.

  4. right click on the Service.

  5. click on properties.

  6. set the Startup Type to automatic.

  7 set the starting state.

  8. click on apply.

  9. click on OK.

  Now restart the computer for the changes to the effect.

  I would say that you do the check disk on the computer to find the bad sectors and disk related errors on the computer, follow these steps:

  1. the procedure for chkdsk to run:

  i. Click Start

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk/r

  Note: When you restart, Windows checks the drive for errors, and then Windows starts. Now, run the disk check in the command prompt.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't do an update of windows in safe mode and unable to start my computer in normal mode?

  Home premium Window7 on Asus laptop

  I want to install antivirus McFee, and it's at a standstill with some problems.  He asked me to do a windows update.

  When I start the computer in normal mode it fails and offers you the following message "a problem has been detected and windows has shut down to protect your computer."

  So I can open only in my local library with the safe mode with networking

  Unfortunately, I can't do an update of windows in safe mode?

  I spent hours trying to solve this problem without the chance and the library is due to close so I'll for now I just ask if anyone can help: -.

  So, how can I do because the computer does not allow me to open in normal mode and I need to install windows updates?

  REMOVE McAfee.  Download your computer up to date and works well.

  Do a scan with ADWcleaner http://www.bleepingcomputer.com/download/adwcleaner/

  AFTER that, install McAfee.