Windows 7 black screen at startup

Similar Questions

• Windows Vista black screen after startup

  Hello!

  I have a pc HP G60 with Windows Vista. After the updated pc, I couldn't use Google Chrome (it crashed and said 'Whoa Google Chrome has stopped working') after reading a few posts, I decided to restore the pc. So once I did this it worked fine. The next day Chrome stopped working again and not so my Mozilla Firefox (it says THAT XPCOM is not found) and I think it was because as I closed the previous night there are more updates running on the computer. So I restored around 4 or 5 times and the last time I have done that and restarted the computer, that he was really a lot of time with a black with just the mouse screen shows so I shut it down by pressing the power down button (bad I know). Now, whenever I turn it on, you can see the Windows loading screen with the small bars at the bottom and then there is a black screen with white text, requesting that the operating mode (safe mode, normal mode, etc.) and then after I decided to use it says loading files or something like that in the white text then just a bunch of names to run it on the screen. However, after that then it goes to a black screen with only the mouse showing. Someone knows how to fix this? I tried pressing the f8 key and I tried pressing the power button for 30 seconds without energy sources and put into market as Sigma_08 says in this post:

  https://social.msdn.Microsoft.

  and the CTRL ALT DEL, but it still does not work. Is there something I can do? D:

  * I tried all modes (normal, security) on the start screen (it opens with this screen every time since I closed it the wrong way.

  Hello! Thanks for the help! I have not tried, but because it turned out that I was pressing f8 at the wrong time, then tried again before the windows logo showed on the screen and was able to use the Repair Options and then system restore and this time he solved the problem! Thank you again for taking time to answer and the link!

• Pavillion dv6 6b15ed: Driverupdate to fix the black screen at startup windows 10!

  Hello

  Question:

  Is there a new driver is released for my AMD Radeon HD card 6755 2? (double grafics)

  Because the latest driver causes a black screen at startup. Sequence: wenn turn on u see hp and that start-up logo win 10 after that it crashes on a black screen for about 2 minutes, then start 10. (about 2, 5 minutes later)

  I have now installed a windows 8 (issues) driver and windows starts in 6 seconds (with normal hard drive).

  I can't play the games but the bootspeed is good.

  So is there a fix or is there is 1 entry?

  TNX

  While the video card is not supported with the latest drivers.

  You can update as much if you want to, but isn't is not helping.

  Even in charge AMD said that this card is not supported with drivers.

  But today, I tried 1 times more, I used the old driver AMD_Display_13.352.

  With the first reboot, it was still black and some errors of the pilot, but after that the second quick start installation restarts!

  Appearance of the logo Windows 10 only 3 or 4 seconds and start immediately, without black screen and I got sound, video and video tube work as well.

  If other people having the same problem download Drivethelife and download the old pilot 13.352 and see for yourself.

  Make sure u delete all drivers previously installed with DDU (Display Driver Uninstaller) of guru3d site.

  Almost forgot: I also disabled windowsupdate to prevend install other drivers (new).

  Greetings

• Windows Vista, problem of black screen at startup

  original title: Windows Vista black screen problem

  I have a laptop that has an installation damaged Windows vista on it.

  When he starts from the (or should I say trying to start), it's just a black screen, with the slider makes this action of spinning, but that is as far as it.

  It does not start in safe mode

  It will not boot into normal windows is

  & When I run vista disc start Recovery option, he just said, is that the boot files are ok.

  I'm eager to perform a new installation of vista on it, but the label of product key on the base of the laptop has been damaged and is unreadable.

  Q. is possible to recover the product key of the installation that is damaged so that I can run a new installation?, (as I can't currently afford to purchase a license fee)

  Thanks for any valid help

  Craig

  If you can get it running, you can use these to get the PK:

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista operating system is still active and running, use one of the programs above to find your product key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If it's a DVD of vista, using the options you can try a system restore; read the info below.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A305-S6898 - half black screen at startup

  I bought this laptop in early March and had to return to store due to a problem at startup when half of the screen would be black on the Windows login screen. They ordered me a new I got about 3 weeks ago and I used it for about a week before I had the same problem of a half black screen on startup.

  Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.
  I had to reboot in safe mode and run a virus scan just to make sure it wasn't my problem.

  I do not download anything on this computer other than basic messengers and photo editing programs.
  I have a HP MP7170N desktop computer which I use to download everything that seems to work faster than the laptop and I use photo, download torrents programs and store most of my pictures and music on this one and it has only 1 GB of memory compared to this the 4 GB.

  What is the problem?
  Anyone have any ideas as to what I can do.
  I can't really go back to the shop because they give only a grace period of 14 days for returns.

  > I had the same problem of a half black screen on startup.
  > Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.

  Doesn't look good for me it sounds a bit like graphic problem.
  Before contacting a professional Toshiba authorized service provider would be, it would be interesting to know if you have seen improvements after recovery procedure and BIOS updated.
  I think you n t get a recovery disk because you can create it using the verification of software preinstalled Toshiba manual how to create the recovery disk

  If, after installing new check usability of portable and so similar issues still persists.
  If nothing will change it s is strongly recommended to communicate with an ASP.

• Satellite A100 - black screen on startup

  For two days my laptop Toshiba A100-495 / model-No. PSAA9E-18F047GR / Y6065357Q with Windows XP SP3 serial shows a black screen at startup. There is still no picture Windows startup.

  The laptop is all starting, but after finishing and be ready for use, the screen is always black. When I am pressing Fn + F5 keys, the desktop appears.

  The black screen is only starting cold after stopping, not awareness of standby or pause.

  > When I am pressing Fn + F5 keys, the desktop appears

  It seems that the display output is set to external monitor
  You see the Toshiba start screen if the laptop is connected to the external monitor?
  Check it!

  In addition, I am agree with Akuma BIOS should be the default value.
  To access the BIOS F2 press while turning on the laptop. I hope that you can do this then press F9 for default settings and then exit the BIOS save settings.

• B540 TDR and black screen on startup

  Hi all, I bought a B540 in April a power works fine until end of July when it began to show the error "display driver has stopped working and has recovered." a few days later I let him (I have need as a wifi station to connect devices remove) and after a few hours of work, when I came back, the screen was off and there wa no way to turn it on. I press the power button for a few seconds to turn off the pc and he died. When I turned on, the computer started but the screen is off (not the 'lenovo' logo was shown on the eve) but everything else seemed to work (play plug/unpluging usb external hard drive the sound of the carachteristic). I turned off again and wait ten minutes before the market again, this time above the 'lenovo' logo was shown, but it seems that the pc failed to boot win 8. I unlplugged everything, removed the power cord, wait an hour and after that all started ok but the error message "display driver stop" was still there. After this date the computer randomly starts ok or with the screen. Given that I do not use it intensively Isuspected some windows update to cause this strange behavior and I'm trying to use a point of restoration, until July 17, but the problem was still there. Then I removed all recent windows update of June on, and I realized that in one case, it was not possible (i.e. the "remove/uninstall" button not showed that KB). I googled around and found the subject KB has been reported to broken system and the only way to react was to use a DOS command to reatore a new installation of the system. I did and actually everything works ok for 2 days (one day, I actually use the PC all day to upload stuff to iternet it to work). Unfortunately, after that day, everything seems to repeat: new 'pilot not resposinding to display' and a black screen at startup.

  Please consider that the system is quite new and clean (only 3/4 months of life) and everything works fine until end of July. What do you suggest me?

  
  

• Power outage during Vista SP2 install; black screen on startup of the PC

  Hello-

  I have a PC desktop Gateway which is no longer start after a power failure has occurred during the installation of Vista SP2. The computer displays the progress at the bottom indicator, then, before that can display the login screen, the screen goes black, with a white cursor. CTRL-Alt-Del and Ctrl-Shift-Esc do nothing.

  I tried without success to the following:

  * Safe Mode/Safe Mode control guest - boots to black screen new
  * Startup Repair - told me there is nothing wrong
  * System Restore - tells me there is no available restore points
  * System restore the OEM DVD - can not find hard drive
  * Re-install this is disabled because I can't start Windows Vista-

  There are * all * options other than wiping the disc/lose all my data? The PC is in a remote area and backup drive is not an easy thing to achieve.

  The PC is no longer under warranty of the bridge, and I understand that Microsoft supports is no longer installs OEM of Vista.

  Can anyone help?

  Thank you

  -Andrew

  I can tell you how to make bootable disks, but you already have a disk.

  He has changed since good means of XP repair install from disk by booting from it.

  I would add that info to disk Bootable repair, just in case your DVD is a factory of one computer.

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  It's Vista only repair installation option these days.
  It must be switched on!
  Not much use, is it!

  Good luck with it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista Startup Repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Blocking of black screen at startup

  Hello

  I have a workstation HP Z420 with 32 GB of ram, which starts later, but has a long deadlock over a minute on the black screen of 20 seconds with a cursor, then without for 50 seconds.

  The computer is used for the Audio (Protools). I bought it was loaded with Windows 7 pro I reflected the HD to an SSD at the reception of the box and it started quickly after that. I went into the bios and made a few tweaks. Cutting off the turbo and any limitation of the cpu. This seems to be when it started. I went back and load the defaults and it still does the same thing.

  How can I solve this?

  Hi Tim,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  a. don't you make changes to the computer before this problem?

  b. have you also any error message with the black screen?

  There could be a variety of causes, with the result a black screen the performance of Windows 7 systems. Reasons could be a problem with the video driver, problems with the Desktop Window Manager or may be some registry problems. So, I suggest the following methods to diagnose the problem and help get started you in a good sense:

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:

  If your screen goes black for a few minutes after you unlock the system, you can consult the following link:

  Windows Vista and Windows 7 black screen on computer unlock 

  Method 3:

  If the methods above do not help, please refer to the procedure described in the following link:

  Why my screen is black when I start Windows 7?

  Registry warning:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• VMWare Fusion 7 Windows 7 Black Screen

  VMWare Fusion 7 Pro. I have an existing, working VM of Windows 7 on my Macbook Pro 15 "Early 2011 (4xi7) running OS x 10.10 (Yosemite). I copied the VM to my Mini Mac 2012 (4xi7) running OS x 10.8. When you start the computer virtual on the Mini, I chose the option "moved" instead of "copied", as two virtual machines will never be upwards at the same time. While the virtual machine on the Macbook Pro still works fine, the VM copied on the Mac Mini boots to a black screen in the main window. However, the preview window indicates planned graphs and charts in this window it is started normally! I tried:

  1 again copy the VM

  2 turn off the acceleration option and the retina of 3D graphics

  3 reinstall the VMWare Tools (since I see still graphs in preview window, this was difficult but not impossible)

  4. turn the simple core CPU and remove image from DVD player

  Nothing has worked so far. Any ideas?

  Well, I found the problem: the card drivers USB DisplayLink. It's one of these USB devices that allows you to attach a view to it. The version of the drivers I had installed caused this problem. Not sure if the new drivers solve this problem, because I just uninstall them. More info here: [solved] black screen at startup of Windows 7 VMWare Fusion Bootcamp VM when you use displaylink USB drivers | Sean Cull

• Black screen at startup, unable to boot from the CD

  I did something wrong on my Thinkpad T43 2668, now I have Black Boot screen cannot Access IBM, can not press a function key, cannot start from the CD.  Here's what I did:

  1 got unwanted winxp sp3 updates automatic, then restored to the permeable point via Windows XP system restore, then, cannot start system; cannot boot from the Windows XP CD

  2 2 demarrer start from Linux Live CD, format hard drive and install ubuntu, hidden Partition of domain is not deleted, always there;

  3. can start Linux OS, but black screen on startup. There is no way to see what's happening at startup; Pressing a key of function or IBM bottons returns no result, always boot in Linux;

  4. cannot boot from any CD bootable legal except Ubuntu Live CD;

  5. no means of access Bios to set the boot sequence, therefore, cannot boot from USB floppy either.

  Advice is appreciated!

  PS. I tried Linux live CD some time ago before this trouble, click on "help me to boot from CD", got something installed. I guess it's something installed out of the box and that is why now I can boot from a Linux Live CD.

  
  

• All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup

  All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup, no problems before

  Try to leave is SafeMode as shown here:

  Try safe mode if your Mac does not end commissioning - Apple Support

• Black screen on startup Satellite A80

  I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

  Hi poly

  Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
  Switch you to other devices to display, before this problem occurs?
  Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.

• HP x 360 310 n3530 g1: black screen after startup

  Hello

  I just bought n3530 g1 310 hp x 360 and upgraded to windows 10. I have a weird question. Since the whenewer then I computer shutdown and boot it up I have black screen. I have to press the power button / stop to put it in standby mode. So I have to tap it again and after the awakening of the screen lights up and I can connect. What is more interesting, does not happen if I restart the system. Then everything works fine. Any ideas?

  Concerning

  HI Marqueee,

  Try this link to third parties for a solution. This a common problem after upgrade Windows 10.

  http://www.thewindowsclub.com/Windows-10-black-screen-problems

• Windows xp black screen with the cursor

  Windows xp black screen with the cursor

  Hello

  You did it changes on the computer before the problem started?
  You are able to start the computer in safe mode?

  If you cannot start the computer in safe mode , and then follow the steps in the article mentioned below.

  Computer stops responding with a black screen when you start Windows XP:
  http://support.Microsoft.com/kb/314503

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.