Windows 7 blue screen DRIVER_POWER_STATE_FAILURE ntoskrnl.exe
Hi community
I'm having a problem with my installation of Windows 7. When I try to shut down my pc, it still shows the blue screen with the message "DRIVER_POWER_STATE_FAILURE. I did research on the internet and discovered that this blue screen is above all connected to a driver problem. Then I updated some drivers at random, but it has not solved the problem for me. Could someone help me to analyze my Minidump file? I put it on OneDrive:
https://onedrive.live.com/redir?RESID=A57FDA7761102DB1! 154 & authkey =! ALphxLeHKGmn8fM & ithint = the file % 2cdmp
Thank you!
A site shows the same stop error messageand it points to 5U877.sys camera Ricoh drivers, can cause this stop error
This file is 5 years on your system. See if there is an update for it
Tags: Windows
Similar Questions
-
I have a new Sony Vaio Pro and have experienced outages of system 3 times. All the accidents that happened after I've restored from hibernation and were related to the bug check DRIVER_POWER_STATE_FAILURE. After the first two accidents, I ran Sony diagnostics on the memory and hard drive SSD and they passed the test. I even sent my Vaio Pro to the repair depot to Sony for a test on the memory, hard drive and other hardware and they all passed.
I found my Vaio Pro last Wednesday and updated the Windows 8 from scratch. This morning, after the resumption of hibernation, I realized my Bluetooth mouse did not work. So I stop the laptop hoping a restart could solve the problem. However, it took almost 5 minutes before they would stop and restart Windows gave a warning:
"Experienced problem with closed Windows. Your PC fell on problem. This problem case your PC to restart.
BlueScreen Viewer it pointing DRIVER_POWER_STATE_FAILURE caused by driver ntoskrnl.exe.
BlueScreen details as follows:
A problem has been detected and Windows has shut down to prevent damage to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is installed correctly.
If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading.
If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options and then
select Safe Mode.
Technical information:
STOP: 0X0000009F (0X000000000000012C, 0XFFFFFA80196707C0, 0 X 0000000000000004, 0XFFFFF880009EC810)
Ntoskrnl.exe - address 0xfffff80189072106 base at 0xfffff8018901e000 DateStamp
0x51a966cd
Here's my minidump file:
https://DL.dropboxusercontent.com/u/1928780/093013-7531-01.dmp
File Msinfo32.NFO:
https://DL.dropboxusercontent.com/u/1928780/Msinfo32.nfo
Dump file memory (do not know why this file is nearby big 550MO):
https://DL.dropboxusercontent.com/u/1928780/memory.dmp
p.s. I think this may have something to do with my Bluetooth driver I had experienced many times the Bluetooth driver has been disabled by Windows and the event viewer reported "the Local Bluetooth is not indeterminate way and will not be used. The driver has been unloaded. "
Thanks in advance,
William
Hi William,.
The attached file of the DMP is the error checking DRIVER_POWER_STATE_FAILURE (9f) .
This bug check indicates that the driver is in an inconsistent or invalid power state.
9F, {4, 12 c, fffffa80196707c0, fffff880009ec810} error checking
Parameter 1 of the bugcheck is 4 , which indicates that the transition of power over waiting to synchronize with the Pnp subsystem.
The 2nd setting is 12 c , which indicates that it is exceeded for a total of 12 seconds.
By default, the crash dump is failing UsbHub3.sys who is the pilot of HUB-USB3 (System driver and not the true cause, and is due to the fault by something else).
If we look further into the dump:
ERROR: Module load completed but symbols could not be loaded for btmhsf.sys
FAILURE_BUCKET_ID: 0x9F_4_btmhsf_IMAGE_UsbHub3.sys
Implicit thread is now fffffa80 196707 c 0
^^ If we run one! thread on the address fffffa80 196707 c 0:
Child-SP RetAddr: Args to child: call Site
fffff880 '20b42f20 fffff801' 890bb7cb: fffffa80'00000001 00000000'00000000 00000000'00000003 00000000'00000000: nt! KiSwapContext + 0 x 76
fffff880 '20b 43060 fffff801' 890ba60f: fffffa80'18b23ef8 fffff880 '0115a 178 00000000 00000000' fffff880' 0622a 202: nt! KiCommitThreadWait + 0x23b
fffff880'20 b 43120 fffff880'06114700: fffffa80 '16115fd8 fffff880' 00000001 00000000' 00000000 00000000'00000000: nt! KeWaitForSingleObject + 0x1cf
"fffff880 '20b431b0 fffff880' 06117ef0: 00000000 ' 00000018 fffff880 ' 0622a2f8 00000000'00000000 00000000'00000018: btmhsf+ 0 x 33700
fffff880 '20b431f0 fffff880' 060fb1e4: fffffa80'17 has 00030 fffff880 '20b433b0 fffff880' 0622a2f8 00000000' 00000000: btmhsf+ 0x36ef0
fffff880 '20b 43260 fffff880' 060e2b84: 0000057f 'e9eaddd8 00000000' 00000127 fffff880 '0622a2f8 fffff880' 0115 has 178: btmhsf+ 0x1a1e4
fffff880 '20b432b0 fffff880' 060e2cce: 00000000'00000008 fffff880 '20b 43370 00000000'00000008 fffff880' 20b 43378: btmhsf+ 0x1b84
fffff880 '20b432e0 fffff880' 0114ecb0: fffffa80'16153860 00000000 00000000' fffff8a0 '04c3a748 fffff801' 89403cfe: btmhsf+ 0x1cce
"fffff880 '20b 43310 fffff880' 010e881d: 00000000 ' 00000127 fffff880 ' 20b433b0 00000000'00000119 fffffa80'16153860: Wdf01000! FxPkgPnp::PnpEventSurpriseRemoveIoStarted + 0x2c
"fffff880 '20b 43340 fffff880' 010e9032: fffffa80 ' 16153980 fffffa80' 16153988 fffffa80 ' 16153860 fffff880 ' 20b434c0: Wdf01000! FxPkgPnp::PnpEnterNewState + 0x1a1
"fffff880 '20b433e0 fffff880' 010e8cdd: 00000000 ' 00000000 fffff880 ' 20b434c0 fffffa80 ' 16153970 fffffa80' 16153860: Wdf01000! FxPkgPnp::PnpProcessEventInner + 0 x 122
fffff880'20 b 43450 fffff880'0114 701 d: 00000000 00000000' fffffa80 '16153860 fffff880' 00000000 00000000 00000000': Wdf01000! FxPkgPnp::PnpProcessEvent + 0x18d
fffff880 '20b434f0 fffff880' 010d1ecf: fffffa80'16141 b 30 fffff880 '20b 43570 00000000 00000000' fffffa80' 1615d1d0: Wdf01000! FxPkgFdo::_PnpSurpriseRemoval + 0 x 25
fffff880 '20b 43520 fffff880' 010c99da: fffffa80'197 b 9010 fffffa80 '197b 9010 fffffa80' 197b 9010 00000000 00000000': Wdf01000! FxPkgPnp::Dispatch + 0x18f
"fffff880 '20b 43580 fffff880' 010c9aa6: fffffa80' 197b 9010 00000000'00000005 fffffa80 ' 161531 c 0 fffff880 ' 062fca20: Wdf01000! FxDevice::Dispatch + 0x19a
fffff880 '20b435c0 fffff880' 062e3cbe: fffffa80 '197b 9010 00000000 00000005' fffffa80' 1615e190 00000000' 00000000: Wdf01000! FxDevice::DispatchWithLock + 0xa6
fffff880 '20b 43600 fffff880' 062e3484: fffffa80 '197b 9010 00000000 00000000' fffffa80' 1615e190 00000000' 00000000: bthport! BthDefaultPnpHandler + 0x2a
fffff880 '20b 43630 fffff880' 062e2cc1: fffffa80 ' 1615e190 fffff880 '062fca17 fffffa80' 1615e190 fffffa80 ' 197b 9010: bthport! BthHandleSurpriseRemoval + 0xc4
fffff880 '20b436b0 fffff880' 062e2b04: fffffa80' 197b 9010 00000000'00000701 fffff880 '062fca20 fffff880' 20b 43800: bthport! BthHandlePnp + 0x16d
fffff880 '20b 43700 fffff801' 8940a8f7: fffffa80 '1615e040 00000000' c00000bb 00000000 00000000' fffff880' 00a 82180: bthport! BthDispatchPnp + 0 x 68
"fffff880'20 b 43750 89526 fffff801 39 d: 00000000 ' 00000017 fffff880 ' 20b 43819 fffffa80 ' 16137710 fffffa80' 16137060: nt! IopSynchronousCall + 0xc7
fffff880 '20b437c0 fffff801' 895265e6: fffff8a0 ' 04069710 00000000'00000308 fffffa80' 16137060 00000000 00000000': nt! IopRemoveDevice + 0xd9
fffff880'20 b 43880 fffff801'89526501: fffffa80'16137710 00000000 00000000' fffff8a0 '0c432a01 fffff880' 20b 43930: nt! PnpSurpriseRemoveLockedDeviceNode + 0xaa
fffff880'20b438d0 fffff801'89526468: fffff8a0 00000000'00000000 00000000'00000000 ' 0c432a70 fffffa80'16137710: nt! PnpDeleteLockedDeviceNode + 0x5d
fffff880 '20b 43910 fffff801' 89525bcb: 00000000 00000000' fffff880 '20b43a70 fffff8a0' 0b89e6f0 00000000'00000005: nt! PnpDeleteLockedDeviceNodes + 0 x 98
fffff880 '20b 43970 fffff801' 893b52e5: fffff880'20b43b88 00000000 00000000' fffff8a0 ' 05764100 fffff8a0' 00000000: nt! PnpProcessQueryRemoveAndEject + 0x2c3
fffff880'20b43ae0 fffff801'89418346: fffff8a0'04069710 00000000'00000000 00000000'00000001 00000000'00000000: nt! PnpProcessTargetDeviceEvent + 0x9d
"fffff880 '20b43b20 fffff801' 890b62a1: fffffa80 ' 196707 c 0 fffff8a0 ' 0b89e6f0 fffff801 ' 8941805 c fffffa80' 16748130: nt! PnpDeviceEventWorker + 0x2ea
"fffff880 '20b43b80 fffff801' 8904afd9: fffffa80 ' 00180000 00000000 00000080' fffff801 ' b 890, 6160 fffffa80 196707 c 0: nt! ExpWorkerThread + 0 x 142
fffff880 '20b43c10 fffff801' 890ff7e6: fffff880 ' 00a 82180 fffffa80 ' 196707 c 0 fffffa80 ' 06741b 00 fffffa80' 06765940: nt! PspSystemThreadStartup + 0 x 59
fffff880'20b43c60 00000000' 00000000: fffff880 '20b 44000 fffff880' 20b3e000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16We can see the various routine calls BTHUSB Device bthport.sys (Bus Bluetooth driver) who then finally enter various before btmhsf.sys some error checking.
btmhsf.sys is the Intel Proset Bluetooth HighSpeed filter driver and probably the culprit here. Update this driver ASAP - http://downloadcenter.intel.com/default.aspx?iid=gg_support-EN_01+home_downloadctr
or uninstall it if you do not plan to use BlueTooth.---------------------------------------------------------------------
If after doing the above, you are still blocked, remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:
-AVG removal tool http://www.Avg.com/us-en/utilities
In addition, to answer your question as to why the MEMORY. DPM is so important because it's a dump of memory rather than a small kernel. Kernel memory dumps contain all the kernel memory was working with and that was in use at the time of the accident, that is why it is larger and provides much more information.
Kind regards
Patrick
-
Hi all
I got a blue screen today with my Windows 7 which is something disappointing and I don't want to do it again, can someone check the dump for me file and tell me what is the cause?
********************************************************************************
The problem seems to be caused by the following file: ntkrnlpa.exeDRIVER_POWER_STATE_FAILURE
Technical information:
STOP: 0X0000009F (0 X 00000003, 0X8903B458, 0X83133AE0, 0X88B16008)
Ntkrnlpa.exe - address 0x830eaf1c base at 0x8300c000 DateStamp 0x4f5583be
********************************************************************************
I have:
Intel i5 760
4 GB of ram
Windows 7 32 bit
Comodo 5.10.228257.2253
NOD32 4.2.71.2In case there is something wireless (I read something on this, but not sure!), I have:
Device USB of TP-link wireless (& TP-link utility)
SecurityKISS tunnel software
proXPN vpn softwareDrivers:
Microsoft virtual Wifi Miniport adaprot
Realtek PCIe GBE controller (disabled)
TP - LINK 150Mbps Wireless N adapter Lite
Unknown device
TP - LINK 150Mbps Wireless N adapter LiteVirtualBox has been running a win XP version that has Avast & Comodo
At the point of issue, virtualbox was operating in full screen, Firefox open and no one to the PC (no action)
I downloaded the dump file to:
http://DepositFiles.com/files/q4ebw15vb
Password: win7winThank you
Hello
You have made any changes to your computer recently?
I suggest you to follow the steps and check if it helps.
Method 1: Disconnect all external devices except your mouse and your keyboard and check what is happening.
Method 2:
Step 1: Login to the Safe Mode and then check if it helps.
Start your computer in safe mode
Step 2: Perform a clean boot Hardware and a software clean boot, and then check if it helps.
(a) click "Start" and type "DEVMGMT. MSC"in the search text box and press enter
(b) develop "audio, video and game controllers".
(c) right click on your sound card, select "Properties".
(d) 'Pilot' click, click Disable the selected device. Click OK
(e) Please use the same method to disable other devices such as: Modem, network card, CD - R drive. Please note that some devices such as the video card are not available should be disabled.
(f) Please restart the computer.
Note: do not forget to activate the devices to return after you complete your troubleshooting.
Method 3: You can also check out the link and then check if it helps.
-
Need help... My ASUS N43SL got BSOD every time I try to Hibernate. (Windows Pro 8, update Windows 7 via Windows site)
Stop and restart Mode did not.It comes to my minidump link... https://SkyDrive.live.com/redir?RESID=F266C2A31EC1D90D! 344The minidump file showed a DRIVER_POWER_STATE_FAILURE (9f) referencing the ndiswan.sys.
Other users report similar errors and Connectify and Kaspersky installed for example here , the problem seems to be Connectify or Connectify clashing with Kaspersky.
Try to uninstall Connectify and, if him persists error uninstall Kaspersky and use alternative security such as firewall and antivirus integrated Windows 8 (Windows Defender) software.
Also, the driver verifier seems to be activated which should not be enabled under normal circumstances also to 'turn off' the driver verifier:
Start > type verifier.exe and press 'Enter' on the keyboard > clear the existing settings > finish > click 'Yes' to the message to delete the settings and exit the program
-
blue screen "driver_power_state_failure.
I have a Dell laptop running Windows 8.1 (64-bit).
From time to time I get error on blue screen "driver_power_state_failure", which is caused by this driver "ntoskrnl.exe".
I don't know why I get this error exactly, but I have, it appeared after each update the graphics card (I have Niviad GeForce 840).
Here is a link to the .dmp file:
https://www.dropbox.com/s/s8fr2kb153ymg4f/062315-32156-01.dmp?DL=0
Hello
9F error checking, {3, ffffe000b907e5e0, fffff802247c7960, ffffe000b90b5bd0}
Probably caused by: ACPI.sys
ACPI.sys and other indicators in the minidumps are components of Windows which means
else led him into error.No real help in the minidump.
1. uninstall McAfee and the use of Windows Defender in Windows 8/8.1 that is a complete antivirus.
McAfee removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeList of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN1462. check with Dell Support, their drivers and documentation online and ask in their forums
on known problems. Updated BIOS, drivers of low level chipset and on-board major
and drivers of separate devices (see methods of updating driver below).<-- in="" this="" case="" this="" is="">-->
important.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
3 use all methods in the troubleshooters below if necessary.4 if necessary execute DriverVerifier to see if it can indicate a CAUSE (see methods of DriverVerifier
below).------------------------------------------------------------------------------------------------
Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate Windows 7 methods and use them on Windows 8.
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
Start Windows (applies to Windows 8).
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990==========================================================
This "might" be a power problem, even if it's not the most common cause.
9F is probably a driver issue. Antivirus/antispyware/security programs can also cause these problems.
Have you added the recent devices or the updated drivers - do not forget to check in Windows updates of
see if a driver has been updated before that happens. This can also be caused by a loose card
or cable and even a weak power supply.This error means that a driver does not properly support the power state. Check in Control Panel-
Device to be sure management of great drivers are stopped not for sleep - double-click on display
Adapter - card NETWORK and WIFI - healthy and others - tab power management - uncheck allow
computer to power off. Maybe the only has a problem.(Use EXECUTION instead of start - search such as used on Vista or Windows 7)
WINDOWS key + X - RUN - type MSCONFIG.exe
General tab - tick this box start Diagnostic - APPLY / OK - REBOOT
Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
(and it might still be video interacts with something else). See link to the troubleshooting tool
above my generic driver update methods.Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE<-- read="" this="">-->
http://msdn.Microsoft.com/en-us/library/ff559329 (v = vs. 85) .aspxBCCode: 9F 0x0000009F<-- read="" this="">-->
* 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-------------------------------------------------------------
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7 (and Windows 8).
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver
Driver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
----------------------------------------------------------------------------------------------------
It's my generic how updates of appropriate driver: (update of your key drivers and BIOS)
This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmMicrosoft - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWhat happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctlyI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Windows 7 blue screen... BCCode: a
I was recently watching a movie on my laptop when suddenly "blue-screen" appeared with error codes. My laptop then restarted and it happened again. I then waited so he can restart once again, however, I started windows in safe mode and then rebooted the system, and it came perfectly. After you find the error Although the center of the action, I found this information.
Signature of the problem
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 2057Additional information about the problem
BCCode: a
BCP1: FFFFFA8015CAF010
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80002B8BA57
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Bucket ID: X64_0xA_nt! MiReleaseConfirmedPageFileSpace + 87
Information about the server: 1d3b1813-1d92-44ea-8f24-3e4ca7b3dac8I would really appreciate any information on this subject and how to work around this problem in the future. Thank you for any feedback.
Hello
References to Vista also apply to Windows 7.
Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates -
updates to the pilot), or add key software lately? Drivers and antivirus/antispyware/security
the products are also suspect likely. Next message is my generic driver updated methods to use when
you get to this part of the resolution of the problems.BCCode: a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after installing a faulty device driver,
BIOS or system service.If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be
caused by a device driver, system service, a virus scanner, or backup tool which is not compatible
with the new version.Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the Windows Advanced Options menu, select last known good Configuration .
- This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus
Scanner, or backup tool- Check the system log in Event Viewer for error messages that may identify the device or
- the driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of material provided by the manufacturer of the system, in particular the memory
- scanner. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has interface cards (SCSI) small computer system, contact the adapter
- manufacturer for updates of Windows drivers. Try to disable sync negotiation in the SCSI
- BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port.
- Also, check each IDE device to the right setting master/slave/stand alone. Try
- remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and all the
devices are listed in the list of the products tested Microsoft Windows market.BCCode: a 0x0000000A<-- read="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that causes
It crashing.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
This is my generic troubleshooting tool and can probably give a bit more specific when help
you give the ICC codes.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen
of death "crashes and displays the information about all crashes in one
Table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista (also Windows 7) Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
DRIVER_POWER_STATE_FAILURE ntoskrnl.exe e58d2
I'm the blockages of the system and this is the error I get: driver_power_state_failure ntoskrnl.exe e58d2
Here is a paste of bluescreenview log:
==================================================
Dump file: 111914-29234 - 01.dmp
Crash time: 19/11/2014-15:39:27
Bug Check String: DRIVER_POWER_STATE_FAILURE
Bug check code: 0x0000009f
Parameter 1: 00000000'00000003
Parameter 2: fffffa80'07581680
Parameter 3: fffff800'04895748
Parameter 4: fffffa80 12854 c. 60
Caused by the driver: ntoskrnl.exe
Caused by the address: ntoskrnl.exe + 75bc0
File description: NT kernel & system
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
CPU: x 64
Plant address: ntoskrnl.exe + 75bc0
Stack address 1:
The stack address 2:
Address 3 the battery:
Computer name:
Full path: C:\Windows\Minidump\111914-29234-01.dmp
Number of processors: 8
Main version: 15
Minor Version: 7601
Size of the dump file: 1 475 032
Dump of file time: 19/11/2014-15:41:49
==================================================Someone has an idea of what is causing this crash? Let me know what I can provide. I'm stumped on this one.
Shaun
I don't know your config so can suggest only you remove the current driver and then install a new one without having to reboot. You can also contact the computer manufacturer for information about the procedure to update.
-
Last night, my laptop that runs windows xp blue screened and says something about the queue
original title: help solve a mistake, please on windows xp
Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:
SC stop cisvc
SC start cisvc
Can someone tell me please how to do this? I think I know, but I'm really not sure so please help... Thank you
It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.
However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.
If you don't see an icon for the printer that you think should be there, you need to fix this. On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.
If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post. However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.
Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless. If you want to change your encryption, you would start by changing the configuration of your router from Verizon. You should be able to find detailed instructions on the Verizon support site. I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm
-
Windows xp blue screen stop: 00000024
Title: original windows xp blue screen
had a blue screen with stop:
Hi steveshepherd,
(1) since when are you facing this problem?
(2) remember to make changes?
(3) what happens when you insert the Windows XP CD?
You can follow the steps provided by Karena R in the link below, which relate to this issue
Kind regards
Ajay K
-
Windows 7 blue screen problems
Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Windows 7 blue screen - halmacpi.dll / ntkrnlpa.exe
Hey guys!
I had the famous Blue error screen in my office, I hope you can save me!
Halmacpi.dll halmacpi.dll + efcd 0x8302d000 0 x 83064000 0 x 00037000 0x4ce788d2 2010-11-20 06:37:38 Microsoft® Windows® Operating System Hardware Abstraction Layer DLL 6.1.7601.17514 (win7sp1_rtm.101119 - 1850) Microsoft Corporation C:\Windows\system32\halmacpi.dll
Ntkrnlpa.exe ntkrnlpa.exe + d166c 0x82c18000 0x8302d000 00415000 0x5315a008 03/04/2014 0 x 07:42:32 (win7sp1_ldr.140303 - 2307) Microsoft® Windows® NT Kernel operating system & 6.1.7601.22616 Microsoft Corporation C:\Windows\system32\ntkrnlpa.exe
Files:
https://onedrive.live.com/redir?RESID=40C4D78CE0F81FB9! 116 & authkey =! AGA__M5bCw31VYs & ithint = % 2cdmp
They are called BCC124 and are related to the material. Read how to diagnose and, hopefully, correct in this wiki
-
Windows 7 blue screen 0 x 000000116 with nvlddmkm.sys
Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.
Loading dump file [D:\MEMORY. DMP]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol search path is: * invalid *.
****************************************************************************
* Loading of the symbol may be unreliable without a symbol search path. *
* Use .symfix to get the debugger to choose a symbol path. *
* After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Could not load the ntoskrnl.exe, 0n2 error Win32 image
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 processors) free x 86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Computer name:
Core = 0 x 84403000 PsLoadedModuleList = 0x8454d850
The debugging session: 12:52:48.258 Wed Aug 17 2016 (UTC + 08:00)
System Uptime: 0 days 0:00:35.209
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Could not load the ntoskrnl.exe, 0n2 error Win32 image
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Loading the kernel symbols
...............................................................
..................................................
Loading user symbols
Mini Kernel Dump does not contain the list of discharged drivers
Failed to load image dxgkrnl.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for dxgkrnl.sys
ERROR: Module load completed but symbols can be loaded for dxgkrnl.sys
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.Error checking 117, {88 99008, 9153fed8, 0, 0}WARNING: Unable to verify timestamp for mssmbios.sys
ERROR: Module load completed but symbols can be loaded for mssmbios.sys
WARNING: Unable to verify timestamp for dxgmms1.sys
ERROR: Module load completed but symbols can be loaded for dxgmms1.sys
The kernel symbols are FALSE. Correct symbols to do the analysis.*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
WARNING: Unable to verify timestamp for nvlddmkm.sys
ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
Probably caused by: nvlddmkm.sys (nvlddmkm + 13eed8)Follow-up: MachineOwner
---------1: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************VIDEO_TDR_TIMEOUT_DETECTED (117)
The display driver did not timely.
(This code can never be used for actual error checking).
Arguments:
Arg1: 88 99008, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
Arg2: 9153fed8, the pointer in the responsible device driver module (e.g. owner tag).
Arg3: 00000000, the secondary driver specific bucketing key.
Arg4: 00000000, optional internal context data dependent.Debugging information:
------------------The kernel symbols are FALSE. Correct symbols to do the analysis.*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
Your debugger is not using the appropriate symbols *.
*** ***
In order for this command works correctly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************ADDITIONAL_DEBUG_TEXT:
Use '! findthebuild' command to search for the generation of target information.
If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.FAULTING_MODULE: 84403000 ntDEBUG_FLR_IMAGE_TIMESTAMP: 4fb2071bFAULTING_IP:
nvlddmkm + 13eed8
9153fed8? ???DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_TIMEOUTTAG_NOT_DEFINED_202b: * unknown tag in the list analysis 202 b
BUGCHECK_STR: 0 X 117CURRENT_IRQL: 0STACK_TEXT:
WARNING: Information not available stack unwind. Sequence of images may be wrong.
8eddcb30 91f765b8 9153fed8 00000000 88 69008 dxgkrnl + 0x81a5e
8eddcb9c 91f7597e 00000000 00000001 88 99008 dxgkrnl + 0x825b8
8eddcbbc 91fb192c 00000000 00000102 88 69008 dxgkrnl + 0x8197e
8eddcc34 91fdb944 fffffcfb 00000000 0000075b dxgmms1 + 0x692c
8eddcc5c 91fdc065 00000000 00000000 00000000 dxgmms1 + 0 x 30944
8eddcc98 91fb88f0 8eddcc90 8443a50e 88 69008 dxgmms1 + 0 x 31065
8eddcd28 91fdd3c9 69008 8443a50e 69008 dxgmms1 88 88 + 0xd8f0
8eddcd3c 91fdd485 69008 00000000 88c09d48 dxgmms1 88 + 0x323c9
88 69008 abfb2822 00000000 dxgmms1 8460cf5e 8eddcd50 + 0 x 32485
8eddcd90 844b 4219 91fdd406 69008 00000000 nt 88 + 0x209f5e
00000000 00000000 00000000 00000000 00000000 nt + 0xb1219
STACK_COMMAND: .bugcheck; KoFOLLOWUP_IP:
nvlddmkm + 13eed8
9153fed8? ???SYMBOL_NAME: nvlddmkm + 13eed8FOLLOWUP_NAME: MachineOwnerMODULE_NAME: nvlddmkmNom_image: nvlddmkm.sysBUCKET_ID: WRONG_SYMBOLSFollow-up: MachineOwner
---------1: kd > g
^ No executable debuggees error in 'g '.Hello
nvlddmkm.sys
Seems Nvidia video drivers.
Check with Nvidia Support, their drivers and documentation online and ask questions in the forums about known problems. Update video drivers. If there are no more recent ones it may be necessary to go back to an older stable version.
NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
http://www.nvidia.com/download/index.aspx?lang=en-usNVIDIA Support - check with the support that she might be a known issue
http://www.nvidia.com/page/support.htmlNVIDIA forums - also check for the forums it might be a known issue or others likely to have
http://forums.nvidia.com/--------------------------------------------------------------------------------------------------
Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7We can analyze the minidumps if you make it available from the OneDrive or another file sharing of sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.
Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialA disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
=========================================================
BCCode: 117 0 x 00000117
* 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-BCCode: 117 0 x 00000117<-- read="" this="">-->
https://msdn.Microsoft.com/en-us/library/ff557271%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396Update the video driver - also look for the BIOS and the chipset drivers of low level from the system (motherboard manufacturer of custom systems) manufacturer.
--------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Windows 7 blue screen with prototype and crashed with Crysis
I have windows 7 Professional 64-bit and I have the latest Nvidia Forceware drivers for my graphics card.
I played the game "ProtoType" I've been on it for about an hour, and then he froze suddenly and given a blue screen then restarted.
It is the newspaper that came after it restarted:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 5129More information about the problem:
BCCode: d1
BCP1: 000000000000004A
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF88004684705
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1Files helping to describe the problem:
C:\Windows\Minidump\012110-16785-01.dmp
C:\Users\Alex\AppData\Local\Temp\WER-29484-0.SysData.XMLRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtAlso, when I play the game Crysis after around 10-30 minutes, it freezes and unresponsive, and I have to leave. It's the journal Crysis comes with.
(same error happens in exes Crysis 32-bit and 64-bit)Signature of the problem:
Problem event name: APPCRASH
Application name: Crysis.exe
Application version: 1.1.1.6115
Application timestamp: 562b029a
Fault Module name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16385
Timestamp of Module error: 4a5bdbdf
Exception code: 0000087a
Exception offset: 0000b 727
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 5129
Additional information 1: a580
More information 2: a580fb66e5132619b142ac800d3ffa2b
3 more information: a40c
Additional information 4: a40ce37e5f74a8bbc8853b60e476fc9dRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtThanks for your help :D
animebuster,
For error that you got with ProtoType, I found some information on our site MSDN (which is intended for the developers). Here is the explanation of this error code:0XD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug control has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.I suggest you check that all your drivers are up-to-date.
If you get a response from the thread of Crysis then let us know. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
My PC works very well but a bit slower than before. but as soon as I want to analyze the computer or to change my security settings the computer hang or sometimes shows a blue screen with this error:
STOP: 0x0000001A (0 x 00041287, 0x0080D366, 0 x 0, 0000000 0000000)
It was then that that I am facing this problem and shortly, I write what I did:
1.i made a backup and format the computer and reinstall windows 7, but the problem was still there.
2 change the RAM and HARD drive, but the problem was there even if the problem wasn't their share.
3. I asked some experts they said maybe you should change the motherboard, but that's the last thing I want to do because it's almost cost me new computer and I think the problem is something else.
4. After all this, I decided to work with the computer anyway because I had so much unfinished business, then I realized my keyboard does not work. I bought a new keyboard and it worked.
now my problem is up to this:
I could work with my computer totally fine but it isn't as fast as ever, but that's fine. as soon as I scan the computer or change some settings the computer hangs or sometimes shows error blue screen!
What should I do?
Please help me
y at - it a hope that I could fix it this computer.
Hello
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
According to the description, I understand that you have a problem with slow performance, or sometimes the system hangs while parsing.
Certainly, I understand your concern and will try my best to help you.
I appreciate all your efforts really to try to solve this problem.
I would suggest trying the following methods and check if that helps.
Method 1:
Try to run the troubleshooter of performance and check if it helps. Please follow the steps outlined in the article below.
Note: The resolution of performance problems check issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.
Open the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
If the problem persists, follow method 2
Method 2:
I suggest you try to follow the steps in the link given below and check if it helps.
How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.
https://support.Microsoft.com/kb/929833?WA=wsignin1.0
Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how run the tool (SFC.exe) System File Checkerto scan your system for files and to repair the system missing or corrupt files in Windows. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.
If the problem persists, follow method 3
Method 3:
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft, security scanner please follow the steps in the link provided below.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
For reference:
We may also refer to the article below and check if that helps.
8.1 Windows, Windows 8 or Windows 7 hangs or freezes
https://support.Microsoft.com/en-us/KB/2681286
Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Important: While running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
Get windows error blue screen after installation Service
I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.
I tried to install GO twice and got the same error.
Awating for your valuable review
Hi piZviZ,
Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:
(1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.
(2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1
(3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails
I recommend just update to the latest going TO if possible.
Kind regards
Joseph
Maybe you are looking for
-
6.5.0 fan control and control of the fan
Hello Where can I find the fan control option?
-
My phone is stuck on the black screen
Hello! I own an iPhone 6 hours while I used it began to freeze, and the screen went black. It can vibrate even when people call me or send me messages but that's it. This happened a week ago except that my phone is stuck on the home screen and I coul
-
How to create a seamless copper mask?
-
Impossible to turn off parental control in Windows 10
Today, I met a rather frustrating problem. After starting my laptop with preview W10, build 10130, I noticed a guest who said that safety was turned on, but before I could click it for more information, he disappeared. Nothing in my status bar bar to
-
Installed Hexic Deluxe in a new PC but need the key to unlock. I didn't download it I bought the game. I don't have the key and no one seems to be able to help me no matter where I'm going.