Windows 7 BSOD Lenovo T410

Similar Questions

• Video/HD Audio drivers of Lenovo T410s

  Hello

  I am currently installing windows XP Pro on a new computer laptop Lenovo T410s 2924 - A55 and I got 3 unknown devices that I can not find drivers to work.

  2 of them are video controller (VGA Compatible), I tried to install all the drivers through downloads of lenovo for my model site.

  1 of them are audio device on high definition audio bus

  I know that in the past with other computers laptops lenovo, you must install a fix/patch before you can to get the device recognized by drivers. Anyone know if this is the case or what drivers, this could be?

  Dilli

  Hi and welcome to the forum!

  For graphics drivers see suite KB and doc: -.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/graphics-driver-and-BIOS-setting-for-ThinkP...

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-75732

  Manually install the video driver that links are implying.

  Regarding the audio driver, try to upgrade your XP to SP3.

  Keep us informed.

• Error in installing Windows XP in Lenovo G560

  Hello

  I use lenovo G560 with Windows 7. Now I don't want to use it. So I decided to install Windows XP as normally in desktop computers I used desktop computers only.

  Boot from the CD and windows Set started with loading files... in the Middle, it stops showing the Blue Screen of Death , I'm not sure about why you came.

  Please suggest how to install Windows XP to replace windows 7 in lenovo G560

  When you see the lenovo logo, press f2 to load bios, on the configuration tab, change the sata mode selection settings, save and exit.

  to burn discs of recovery, check the user manuals.

• Lenovo T410s LCD issue

  I have a problem with my LCD on Lenovo T410s. Everyting worked good so far. Today, I wanted to check another LCD for this model that I've got. So I dicsonected the LCD original and connected to another to check. After having seen that the other has worked well, I disconnected it. Then I reconnected the original and the laptop. Unfortunately, when he started, the screen has no shining good – it is very dark. I disconnected that and back I tried the second LCD, but here again the other shined very bad. Can someone tell me what could happen? It seems that the inverter is damaged, but I don't know where is that within this model. Please give me some advice

  My guess is that you skipped a fuse on the motherboard.

  There is no converter as such since it's led lighting panels.

  Good luck.

• Windows 7 BSOD and receiver code error BCCode: 9f

  Original title: Windows 7 BSOD
   
  Hey guys I just built my first system and it was a lot. I used the trial version of Windows 8 64-bit for about a week I had to wait for my windows 7 to arrive. Windows 8 everything went fine with no problems. Then I installed windows 7 and ever since then, every time I leave my system alone for an hour or two, I'll be back to see that it crashed because of this error message below. Can I use my computer all day, video, editing, etc, but when I close all and leave for an hour, I'll be back to see that I have broke down. I try to leave it overnight to install my steam on games but crashes after about an hour.
  Any help would be great.
  Error message:
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA80070A4A10
  BCP3: FFFFF800047C43D8
  BCP4: FFFFFA80097AB010
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\122112-20077-01.dmp
  C:\Users\Ryan\AppData\Local\Temp\WER-58203-0.SysData.XML
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt
  Data sheet:
  Intel i5 3570 k @3.4 ghz
  Cooler Master Hyper 212 Evo
  Z77 UD5H Gigabyte motherboard
  EVGA Gtx 670 FTW
  Corsair Vengeance 8 GB 1600
  Corsair HX 750w PSU
  Seagate Barracuda 7200 rpm 1 TB
  Cooler Master Storm Stryker
  Edit: I thought it might have something to do with memory, so I ran Memtest 86 + 4 hours and had no error: P

  Hello

  Thanks for posting your query in Microsoft Community!

  According to the description, you are receiving BSOD (Blue Screen of Death) and receive the error code BCCode: 9f.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Did you do changes on the computer before the show?

  I suggest to follow the steps of the items listed below and check if it works.

  Error message when you try to resume a Windows 7 or Windows Server 2008 R2 to Hibernate computer-based: "Stop 0x0000009F"

  http://support.Microsoft.com/kb/977186

   

  Stop error when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby or into hibernation, or when you restart the computer: "0x9F".

  http://support.Microsoft.com/kb/975599

   

  stop "0x0000009F" error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/981848

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I don't know how to transfer my Photoshop elements of old Dell Vostro 1720 in New Lenovo T410.  Help, please

  I'm askink to help pass my photoshop elements 10 laptop Dell Vostro 1720 to my most recent Tour Lenovo T410

  You don't move the Adobe applications, install you them, so get the installation files and install them as you did initially.

  PES 10: 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  You will also need your serial number to activate the new installation.  If you have not kept a record of it, you might be able to find it in your account Adobe online if you have registered the program.

  You are allowed to have two facilities enabled so if you wish you can keep the software working on the old machine.  If you wish to remove or disable it, you must disable (help-> Deactivate).

• Lenovo T410s and Mini Dock Plus Series 3 with 2 monitors DVI, white screen during the boot process

  Hello

  I'm having a problem with the configuration of my lenovo thinkpad T410s.

  I have connected two 19' DVI monitors for the docking station, but during the startup process, I get no output on screens.

  After loading Windows 7, the windows login screen.

  In the BIOS all the graphics preferences are being "switchable graphics", because I also use it on business trips.

  Does anyone have an idea how to solve this problem?

  Thank you!

  Michael

  
  

• Satellite A660-1CJ - 8.1 Windows crashes - BSOD bridge.sys

  Hello

  I have a Satelite A660-1CJ, running Windows 8.1 and he already broke 5 times with a BSOD:
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (bridge.sys)

  What can I do?

  Hello

  It seems that the bridge.sys is causing the BSOD.
  Bridge.sys is a Windows system component.

  Toshiba says that the Windows 8.1 is not supported on Satellite A660 series.
  What does that mean?
  This means that Windows 8.1 drivers are not released by Toshiba.

  I assume that you have installed drivers in your own hand and probably one of the drivers causing the BSOD.

• Portege M200 - problem installing Windows Xp - BSOD

  I recently got 2 computers Portege M200 laptops, but previous users had wiped the hard drive.
  So now im trying to install windows Xp via cd-rom drives externel accompanying.
  But when its load to the top of the windows Xp cd it gives me a BSOD somewhere near the end of loading the CD (it always stops on 'Setup starts windows').

  Now, I thought that this could be a hard drive problem, so I have a drive hard "nine", but this still does not work (this problem exists on two laptops).

  Now im wondering if theres some sort of special installation process or something of the sort for the M200?

  I hope someone can help me with my problem.
  Thank you... DG

  Hi mate,

  What version of Windows XP you are trying to install? Windows XP Professional or Tablet edition? You have the available recovery? If Yes, then you should use it :)

  If not, you should check if there could be maybe something with the Tablet thing. It s just a hint, so I'm sorry that I Don t have a real good solution...

  Good luck

• Start the upgrade to Windows 7 BSOD

  Satellite L300 was running Vista 32 sweet as a nut, never any problems. Upgrading to 7 and twice in the last few weeks have had an error at startup 'Page in the nonpaged area failure'. The Startup Repair utility was not able to fix it, but ok after system startup.

  Journal displays all tests OK except:

  Root cause found:
  ---------------------------
  Unknown error checking: bugcheck 50. Parameters = 0 x 0, 0x931f2493, 0x9d789000, 0 x 0.

  Repair action: repair and checking the integrity of system files
  Result: failed. Error code = 0 x 490

  No change in hardware/software/updates or the failure of the system before the startup problem.

  I would normally think RAM may be suspect, but it seems more likely given the totality of the circumstances that it is Windows 7 that is at fault.

  Any thoughts?

  Hmm. It of always difficult to say what could be the reason for the BSOD
  Above all it s related to a software or hardware problem

  I google a bit and result: failure. Error code = 0 x 490 appears also running Vista OS.
  So it s not associated with Win 7 only

  Maybe it s RAM as you suggested you can try to use only a single module of RAM for test purposes

• Windows 8.1 Lenovo z500 drivers

  Hello!

  I have a question when upgrades all drivers lenovo z500 for windows 8.1?

  I want windows 8.1, but I don't update to 8.1 because not all drivers has been updated to 8.1.

  You should be ok if you install via windows update...

• Unknown device - windows 8.1 - lenovo y550

  Hello

  As in the topic, I got problem with the software. I have an unknown device and I can't figure out who it is. Hardware ID shows:

  ACPI\VEN_ENE & DEV_0201
  ACPI\ENE0201
  * ENE0201

  I installed the drivers from the lenovo site and also those that is recommended by "driver max" - even if I thought that it is a false and uninstalled driver, he'll be back. Windows Update will not install anything, I have not updated in hidden. Automatically won't find anything.

  I have Lenovo IdeaPad Y550, 8.1 Windows 64-bit [eng],

  I would be grateful for any help.

  Kind regards

  Krystian

  PS. Here is a screenshot of my device manager, because a screen detailed please ask.

  [code] http://Speedy.sh/JBuNC/devmgmt.jpg [/ code]

  Note of the moderator; s/n, edited for the protection of its own

  OK, my problem is solved, an accident. I was cleaning my external drive when I found the folder with the drivers for Win7 64 bit. I looked through them and install to try, pilot named "ENE CIR driver (remote control)". After a successful installation, I saw this unknown device in Device Manager have disappeared.

  I write it for people who may have had the same problem!

  You see, thank you!

  Krystian

• Install Windows 7 on Lenovo G500 with no operating system

  Windows 7 installation of the cd has frozen to extend the files of 0%. The version of windows 7 previos and all partitions have been removed during installation. I can't access bios or menu command start (Fn + F2 or Fn + F12). All I see is black screen with the lenovo logo. Is it possible to install windows on this machine?

  If you have access to a second computer, you can download the contents of the DVD (.iso file) from Microsoft to install from DVD or with a USB key. Alternatively, you can contact Lenovo support via phone and order your set of recovery DVDs.

• Windows 7 for Lenovo G50-70 - the computer will not boot from the CD

  Hello world

  I hope that someone here will be able to help

  I bought a new laptop with Windows 8.1. I want to install Windows 7 on that I know well because I can't use the new windows. I changed the settings in the BIOS to get the machine to boot from the CD, but it won't be fair. I also tried to restore the system to boot from the CD, but it installs just the Windows pre-installed, new instead. Also, I can't access the CD from the drive while all my other computers are capable of (what is strange)

  Can someone help, please?

  See you soon

  PS. : I can turn on the computer through the small "boot botton" on the side and select the DVD drive to boot from. But this is not followed by the message "Press any key to boot from CD" and the computer starts just W8 yet;

  I contacted customer service and followed your advice. They refused to help him on the ground that there nothing wrong with the machine in their opinion, and since I wanted to change operating system. All preinstalled spyprogrammes Lenovo has been erased with this downgrade. So far, I've owned a laptop computer brand new and expensive for a year I used only to waste my time, trying to make it work, that was not why I bought it in the first place. What a RIP-OFF!

• The upgrade of Windows and the Lenovo enhanced experience

  Hello

  I just got my new laptop Lenovo Z580 with Windows Home Premium 64 bit operating system.

  My school has me given an upgrade of Windows 7 Pro 64-bit because it is necessary for my program. If I run the disk to upgrade to upgrade windows, will be affected features improved experience? I am especially concerned by the optimized startup and its Dolby Home Theater.

  Thank you

  Hello
  You upgrade form win7 for another "version" of windows 7. Thus, all programs will suffer anyway. More during the upgrade, the installer would say the compatibility of all programs.

  Concerning
  Ishaan

  Say thank you by clicking on the 'Star' that is on the left.
  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem