Windows 7 click cycles through the windows environment

Similar Questions

• My update is my phone keep cycling through the settings of update iCloud

  My update is my phone keep cycling through the settings of update iCloud

  What should I do

  Try disabling the Contacts under settings > iCloud. When you are asked if you want to keep them on your phone, select "keep". Tomorrow or Saturday, rallumer turn it back on again, select "Merge" and see if the problem is resolved.

  See you soon,.

  GB

• Cycling through the tab...

  Hello

  Any help would be much appreciated!

  When the timer is finished auto cycling through tabs (1 to 16) of the ViewStack and passage to tab (1) up to the STOP, I want to address a function to do something?
  The question now is how to write the code ID that the timer came to a STOP on the tab (1) and how I can incoperate this service (onTimerOne).

  <mx:Script>
  <![CDATA[
      import flash.events.TimerEvent;
      import flash.utils.Timer;
  
      private var timerOne:Timer;
            
      private function initOne():void {
  
          timerOne = new Timer(5000, myViewStack.numChildren);
          timerOne.addEventListener(TimerEvent.TIMER, onTimerOne);
      }
                                
      private function onTimerOne(evt:TimerEvent):void {
                                
          if(myViewStack.selectedIndex == myViewStack.numChildren-1) {
          myViewStack.selectedIndex = 0;
          return;
      }
          myViewStack.selectedIndex++;
      }
  
      private function autoOne():void {
          if (!timerOne.running) {
          timerOne.start();
          } 
      }
  
      private function manualOne():void {
          if (timerOne.running) {
          timerOne.stop();
          } 
      }
  ]]>
  </mx:Script>
  
  Thanks in advance aktell2007
  			 
  Hi aktell2007,
  You can make use of TimerEvent.TIMER_COMPLETE to achieve...
  See the code example below:
  
  
      http://www.Adobe.com/2006/mxml '.
  Layout = "vertical".
  verticalAlign = "middle".
  backgroundColor = "white" creationComplete = "initOne ()" > "
  
  
  
          Import mx.controls.Alert;
  import flash.events.TimerEvent;
  import flash.utils.Timer;
  
          
  private var timerOne:Timer;
  
                        
  private function initOne (): void
  {
  timerOne = new timer (5000, myViewStack.numChildren);
  timerOne.addEventListener (TimerEvent.TIMER, onTimerOne);
  timerOne.addEventListener (TimerEvent.TIMER_COMPLETE, onTimerComplete);
  }
  private void onTimerOne(evt:TimerEvent):void
  {
  If (myViewStack.selectedIndex == myViewStack.numChildren - 1).
  {
  myViewStack.selectedIndex = 0;
  return;
  }
  myViewStack.selectedIndex ++;
  }
  private void onTimerComplete(evt:TimerEvent):void
  {
  
  timerOne.stop ();
  timerOne.reset ();
  Alert.Show ("cycling through the complete tabs.");
  There, you'll come to know that cycling is performed once and you can do it here logic what ever you want to write
  callYourFunction();
  and then start your timer by calling autoOne(); function to start a new cycle in the tabs
  
           
  }
  private function autoOne (): void
  {
  If (! timerOne.running)
  {
  timerOne.start ();
  }
  }
  private function manualOne (): void
  {
  If (timerOne.running)
  {
  timerOne.stop ();
  }
  }
  ]]>
  
  
        
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
         
  
          
  
         
  
        
  
  
  Thank you
  Jean Claude
  		   

• How to get connected through the recovery environment for the command prompt administrator privileges?

  Original title: how to make the command prompt as Administrator via dvd, USB system recovery / then to repair, recovery environment invites of commands in menu on win vista, win 7, win 8?

  Hello world?, please can someone tell me how do the command prompt as Administrator via/via menu environment of recovery with the option prompt orders..., that way I can activate the hidden administrator because I forgot my password of the computer... rather than editing the registry with the cmd... It says on the top of the command prompt x administrator cmd prompt and on the guest herself said x source then the guest... I thought that I can activate the admin hidden here coz he said administrator on the top of the program but it won't let me activate the admin hidden using this command: "net user administrator / Active. ": Yes" he says: successfully completed, but after I rebooted the computer the hidden admin did not appear on the menu of connection of users, I can activate the admin hidden with this command. "net user administrator / Active: Yes" through connection to a normal startup, then proceed to the command prompt with administrator previledge, but not through, dvd environment then recovery recovery menu system, the command line option... is one way or shortcut to the command prompt with admin previledge as the high cmd prompt the normal start standard? Please please help... I want to do coz I forgot my password for admin user computer, there is no other user account on the computer... "Please help, guru of the computer/engineers/programmers out there," and I thank you so much all the response I get, and God bless the guy more... «what I wanted to say that I can make the order: "net user administrator / Active: Yes" in the connection of nomal startup is coz I tried on another computer with windows vista 64 bit...» "but I forgot my computer password... I know how to edit the registry, although to allow the hidden via the recovery environment option administrator cmd menu but I want the shortcut... thank you once again,

  Hi Robert,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/threads

  Hope this information helps.

• wwv_flow. Accept null off the coast of the element leader through the execution environment

  Hi all

  I use APEX 5.0 running on ADR and Tomcat.  Element browse file uses the type of storage APEX_APPLICATION_TEMP_FILE.

  In development env, I create a simple form with a selection list, item file browse and view the field to display the value of the item when click on the "submit" button.  It is the result of the tests in run mode

  

  I export and import the script execution environment and you can see he has selected file

  

  The result in Runtime Environment prompt filename must have a certain value because it is obligatory validation and display field is empty.  Perform a validation system at wwv_flow.accept

  

  Below the log tool Chrome Developer collected

  < / select > < / div > < / div > < div class = "Form-t-fieldContainer-rel - col" id = "P1_FILENAME_CONTAINER" > < div class = "Form-t-labelContainer col col-null" >

  < label ID = "P1_FILENAME" = "P1_FILENAME_LABEL" class = 't-forms-labels' > Filename < span class = "u-VisuallyHidden" >(Value Required) </span > < / label > < span class = "t-form-required" > < span class = "Icon-icon-asterisk" > < / span > < / span >

  < / div > < div class = "t-Form-inputContainer col col-null" > < input type = "hidden" name = "p_arg_names" value = "18666865580678664" / > < input type = "file" id = "P1_FILENAME" name = "p_t02" needed aria-required = "true" class = "file & #x 20; Apex-page-point-error"size ="50"/ > < span class = 't-form-error' > Filename must have a value. < / span > < / div > < / div > < div class = "t-Form-fieldContainer-rel - col" id = "P1_DISPLAY_FILENAME_CONTAINER" > < div class = "t-Form-labelContainer col col-null" >

  < label = "P1_DISPLAY_FILENAME" ID = "P1_DISPLAY_FILENAME_LABEL" class = 't-forms-labels' > view the name of the file < / label >

  < / div >

  Anyone this encounter in the runtime environment?  Any special action to import what item type to browse file?  What is the possibility of this issue?

  Thank you, Dorothy

  Dorothy salvation,

  have you ever tried to turn the logging/debugging in ADR? See https://cdivilly.wordpress.com/2013/03/08/configuring-logging-in-oracle-application-express-listener-2-0-1/

  (This will work also in ADR 3).

  When I started ADR mode autonomous and presents a page with a downloaded file (named kirschbaumhaus.txt), I see the following output in the console of ADR window. You see a similar output when you try with your single runtime system. I think that your question is not in the APEX (because we never see the file name), instead, it could be that ADR is not able to store the file in the WWV_FLOW_FILES.

  {p_page_submission_id=939808037044, p_request=New, p_flow_id=104, p_instance=16677270668553, p_flow_step_id=2, p_arg_names=1932112550244117}
  p_request=New
  FILE: kirschbaumhaus.txt
  TYPE: text/plain
  UNZIP:false
  {p_page_submission_id=939808037044, p_request=New, p_flow_id=104, p_instance=16677270668553, p_flow_step_id=2, p_arg_names=1932112550244117}
  p_flow_id=104
  {p_page_submission_id=939808037044, p_request=New, p_flow_id=104, p_instance=16677270668553, p_flow_step_id=2, p_arg_names=1932112550244117}
  p_flow_step_id=2
  {p_page_submission_id=939808037044, p_request=New, p_flow_id=104, p_instance=16677270668553, p_flow_step_id=2, p_arg_names=1932112550244117}
  p_instance=16677270668553
  {p_page_submission_id=939808037044, p_request=New, p_flow_id=104, p_instance=16677270668553, p_flow_step_id=2, p_arg_names=1932112550244117}
  p_request=New
  request parameter: p_t01=1940850026051534/kirschbaumhaus.txt
  Form field: p_md5_checksum with value:  detected.
  request parameter: p_md5_checksum=
  

  You can also try to recreate your grants and public synonyms, because I saw you another thread with a different number of grants... I guess that the file upload fails due to a missing grant/synonym.

  $ sqlplus /nolog
  SQL> CONNECT SYS as SYSDBA
  Enter password: SYS_password
  
  ALTER SESSION SET CURRENT_SCHEMA = APEX_050000;
  exec wwv_flow_upgrade.recreate_public_synonyms('APEX_050000');
  
  select * from wwv_flow_upgrade_progress;
  ALTER SESSION SET CURRENT_SCHEMA = SYS;
  

  Concerning

  Patrick

• Slideshow with buttons will not allow more than one cycle through the timeline.

  Hi, I'm new to AS3. I have a slideshow with 4 slides. They are all in scene 1 in the timeline. Each is on its own layer (and I have a fade between them on the timeline effect). I added labels to a separate layer in the timeline panel so that I could use the front and back to "accelerate the process" essentially (instead of wait for the slide to change). I can successfully use the buttons to scroll through the slideshow once, but if I try to scroll the slides more than once, I get no further than the first slide.

  I put this code on the buttons in the first frame of each section marked on my calendar:

  fwd_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_18);

  function fl_ClickToGoToAndPlayFromFrame_18(event:MouseEvent):void

  {

  gotoAndPlay ("Shopper_2");

  }

  back_btn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_19);

  function fl_ClickToGoToAndPlayFromFrame_19(event:MouseEvent):void

  {

  gotoAndPlay ("Shopper_1");

  }

  Any ideas?

  Kind regards

  zerozone

  The code for the buttons would not change much and would not be in frame 1.  You would only change the functions to use variables for the gotoAndPlay() class

  var fwdFrame:uint =? ; Use whatever the value would be for the goto frame 1 normally

  var backFrame = 1;

  fwd_btn.addEventListener (MouseEvent.CLICK, fl_goForward);

  function fl_goForward(event:MouseEvent):void {}

  gotoAndPlay (fwdFrame);

  }

  back_btn.addEventListener (MouseEvent.CLICK, fl_goBack);

  function fl_goBack(event:MouseEvent):void {}

  gotoAndPlay (backFrame);

  }

  Make sure that this layer extends the full chronology tlength so that variables and functions are available all she.

  Then, you just need to change the values of fedFrame and backFrame again each breakpoint on the timeline.

• Error when you try to play multimedia files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  ERROR: Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web.

  I get the error Windows Media Player 11.0.6001.7007.  "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web frequently. "What happens on the music or video files even those I had on my PC for a long time.  They work some days and other days they don't.  I have to reboot to clear it and it's really annoying. I can read a file and then 10 minutes later the same file will not play.  Sometimes after the error message, if I don't click Close, the video is not yet but the audio will not.

  I'm on a laptop HP DV5 with vista 32-bit and 4 GB memory such that shipped HP (Yes, 4 concerts and 32-bit).

  I don't know if it was related, but IE7 would continually fail to open, click on through the windows and should be completely closed.  essentially the WMV and IE are fails miserably on this laptop, and it was only 6 months old.  Firefox fixes my problem of browser.

  How can I fix this WMV as I can't UN/reinstall with Vista?

  I ran sfc/scannow after completion of the analysis, the results were that "windows resource protection finds corrupted but files could not solve some of them" gives then refers to where the cbs.log file is located. I tried to open the cbs log, and he says that access is denied.

  UPDATE: there seems to be a conflict between WMP and any other application that opens which can play the video with sound.  When I close firefox, and then the videos and sound can play (these same questions happened on IE7 and firefox was installed just yesterday).  I met the same problem with more than Pinnacle video editing software.  Is it possible to change a parameter with WMP as there is no sharing violation during a different application can play the video?

  SO thanks a lot!    I had to use the following steps to get your simple solution:

  1. Select Options under the button 'SYNC '.

  2. choose 'other Options '.

  3. click on the tab 'network '.

  4. only check box RTSP/TCP and HTTP and Multicast Streams allow the player Pourrecevoirun multicast stream (which meant I had to uncheck "RSTP/UDP"

  5. click on apply and take advantage of my windows media player.

  Thanks a lot wmd_user!

• Impossible to scroll through the list of fonts in InDesign (stuck on the list of Document only)

  Hello

  It is my first time ever poster and if I posted in the wrong place or wrong I apologize.

  Just recently, my InDesign (CS6) met a problem scroll through fonts in the drop down menu on the Panel. I always just selected (highlighted) text in the document and then to scroll upwards / downwards in the box the name of the font so that it should scroll each cast. Of course, this would result in being able to get a glimpse of what my selected text would look like in each font that I scrolled. Well now, all of a sudden I can only scroll my document only fonts (which are at the top of my list of fonts). He basically just guard cycling through the list like 5 fonts over and over. He won't go past the last document only melting in the list. If I click on a font not in my paper now and start to scroll from there he still jumps in my fonts only document. Any idea on what could be the cause? Any help would be greatly appreciated.

  Thank you

  Heather

  Try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences

• Tables in the schema APEX_050000 not granted to the PUBLIC in the runtime environment

  Hi all

  I compare development and Runtime environment APEX_050000 property schema and subsidies.  I have no error in two newspaper plants

  Select count (*) in the dba_tab_privs where owner = 'APEX_050000' and recipient = "PUBLIC";

  In development, count = 270, at runtime, count = 109

  Select count (*) in the dba_synonyms where owner = 'PUBLIC' and table_owner = 'APEX_050000. '

  To = 293, runtime development County, County = 270

  Is this a bug?  I'm running on DB 11.2.0.4

  Any script available in APEX I can run to grant so many pictures?

  Thank you, Dorothy

  Dorothy salvation,

  a single runtime system has intentionally less public synonyms and subsidies, because we do not install all the packages that are needed for a dev environment. But see wwv_flow.accept null off the coast of the element leader through the runtime environment to find the declaration of re - create these synonyms/grants.

  Concerning

  Patrick

• I can't get the STOP button to appear in the Navigation bar, even after going through the suggestions; It will appear when the Restore Default Set window is open, but disappears as soon as a click on

  The X to STOP loading the page does not appear in the Navigation toolbar. If I right-click, select Customize, restore the default value, it is displayed; Click done and it disappears. I disabled the theme; disabled all extensions; reset the toolbar and commands; disabled acceleration. No luck.

  From Firefox 4, the Go, the buttons Stop and reload are combined into a single button at the right end of the toolbar URL or address. The button changes depending on the type of activity:

  • green arrow GB when you type in the address bar
  • Red Stop ("X") button while the page is loading
  • Reload (circular arrow) to gray when the page is finished loading.

  There are separate buttons:

  1. Open the Customize the toolbar by clicking the Firefox button > Option > toolbars OR by clicking View > toolbars > customize if using the menu OR bar right click in an empty space on a toolbar and select Customize
  2. Stop and Reload buttons will show separate from the address bar and the search bar
  3. Drag the buttons anywhere on the Navigation toolbar
     • order Reload-Stop will bring together into a single button
     • order Stop-Reload will remain in separate keys
     • or drag a "separator" in the window customize between Reload-Stop and that they remain separated
  4. Click done at the bottom right of the window customize to finish

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  You have several older versions of Java installed Console Java did not clean up when updating. Your old versions are: 6.0.16, 6.0.22
  
  Follow these instructions to remove older versions: http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

• I have 17 Friefox and use Windows 7. I can't click on all the links at the top of the pages. Does anyone else have this problem? How to fix?

  I've updated to 17 FF and use Windows 7 on a 2 year old Sony Vaio laptop. Since the update, I can't click on some links, most of which seem to be located at the top of web pages. I also have problems with click and hold to scroll through the long (on the side). He is very picky on where the button sliding I can click on to make it work. I have no problem with the up arrow and down buttons on the right side.

  How to fix?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• The Bookmarks button is now completely missing, and it's forcing me to go through the bookmarks toolbar. The use of FF 17 under Windows 7.

  I just put VII Windows on this computer and therefore had to install 17 FF (I think I was still fifteen years before).

  On this new version, there is no single 'Bookmark' button click to access my favorites and I have to go through the "Bookmarks" thing to the right which gives me no access to most of my links.

  The old method was very good, why do fuck with her! How can I get the single button back so I can open the list of bookmarks together?

  I thought it just a minute ago. It must be because I was running Vista before and 7 now. Bookmark system came back to an older style with a different interface.

  Please, close this issue. Thanks to those who took the time to answer!

• When I download a WMV file on a website and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.

  When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni.  I was told that the media player can miss a card.

  Hello

  1. what operating system is installed on the computer?
  2. are you able to play videos other than video .wmv successfully?
  3. don't you make changes to the computer before the show?

  Method 1
  I suggest you to check if the hardware acceleration of the display device setting is too high.
  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. click the Troubleshooting tab, and then move the hardware acceleration to none.

  d. click on apply and then click OK twice.

  e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.

  Method 2
  The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

  If the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• Ive reinstalled my windows xp through the recovery on my computer several times trying to change my language to English... but it keeps French

  Ive reinstalled my windows xp through the recovery on my computer several times trying to change my language to English... but it keeps French

  Hello

  1. What is the base language that is installed on the system?

  You must install the English language pack.

  I advise you to review the eligibility criteria for the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=XP

  Windows XP has Language Interface Pack provides a version translated from the dialogs used more widely, menu items, and help content. You may be eligible for the same function of the XP license.

  After you install the language pack, you will need to change the settings on your computer below:

  a. in the menu start standard Windows XP, click Startand then click Control Panel.

  In the start menu classic Windows XP, click Start, click settings, and then click Control Panel.

  b. double-click regional and Language Options.

  c. click the languages tab and then click details under "input languages and text Services.

  d. click Add under "installed Services", and then click the language you want to add and the keyboard layout you want to use for that language.

  e. to configure the settings for the Language bar, click language under "Preferences" bar

  You can also see the following article for more information:

  Regional and Language Options Overview:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  Configure Windows XP for multiple languages: http://windows.microsoft.com/en-US/windows-xp/help/setup/set-up-multiple-languages-windows-xp

  HOW TO: Use the language bar in Windows XP: http://support.microsoft.com/kb/306993

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• When I play a DVD on Windows Media Player I get almost no noise through the external speaker on my laptop

  Original title: no volume when playing DVDs

  When I play a DVD on Windows media player I get almost no sound through the external speaker on my laptop. I get some, but it is too weak to really enjoy the movie. If I use headphones I can hear the DVD very well, and I can hear the clips DVD sample provided with my computer on my speakers and headphones. If the computer can generate the volume correctly, but something goes wrong, whenever I try to play a DVD that is not on my hard drive. I tried every button volume already. Thank you

  Hi amorchien,

  1. He played very well earlier?

  2 have you tried to play the DVD in another computer?

  Step 1:

  In Windows Media Player.

  a. click on tools and select Options

  b. click on devices and click on DVD, then select Properties.

  c. make sure that Rip and playback are in digital mode.

  Step 2:

  This problem can be caused by incompatible codecs. I suggest that remove you / uninstall all installed third-party codec packs, players or video record programs.

  Codecs, frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions