Cannot access my WRT54GL site

Similar Questions

• Cannot access a Web site using Java Script

  Cannot access a Web site using Java Script. I'm not sure what it blocks I use Win 7, Avast free, AntimalwareBytes.
  I get a pop up window with
  Name: mcs
  Location: http://myspeedtest02.windstream.net  
  say "application blocked by security settings, blocking the untrusted application.
  I don't know what it blocks, but suspect it is related to the security of Windows.
  I think that the Java Applet is blocked, but I would like to run this test of speed from my ISP.  I tried to access the website of Google Chrome and IE, with the same result. Nobody knows what this block and how to unlock it?

  This is actually not JavaScript, it's Java.  Despite the name, they are really very very different.

  Java itself can be dangerous, especially if it is not a trusted application.  It is my sincere recommendation that you do not continue.

  If you want anyway, you can go into your control panel, open the Java settings and set it to allow untrusted applications.

• Cannot access https secure sites after installation of Netnanny

  Use Firefox for years. Then recently installed "net nanny" software and it has changed the security settings on Firefox.

  I can't access all the secure https sites regardless of whether net nanny software is even uninstalled.

  The following alert occurs on Firefox running...
  "Could not initialize component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features. »

  Then when you try to access an https site, I get an error as follows:
  "Secure connection failed".

  An error occurred during a connection to support.mozilla.com.

  Cannot connect securely because the SSL protocol has been disabled.

  (Error code: ssl_error_ssl_disabled) »

  Use SSL 3.0 and use TLS 1.0 are both selected in the "Advanced settings"

  I also left a post on the forum of Net nanny however clearly don't have an adequate response when they talk about a setting in their software ("allow secure content") which is already activated anyway with the uninstalled software, however it still does not solve the problem. In fact, I had to use IE to post on this forum.

  It clearly provided a message when configuring the net nanny that he changed the security settings when Firefox has been executed for the first time for each user.

  I wish I had a solution so I can go back to using Firefox as my default browser and do believe a software application and a well known who, should take a non-functional browser but not another.

  Start with this support article:
  
  https://support.Mozilla.com/en-us/KB/could%20not%20initialize%20The%20browser%20security%20component

• Web searches are redirected to OpenDNS. Cannot access these Web sites.

  This problem just started. Whenever I try to load a page (in this case Gamefaqs), I get redirected to this search engine called openDNS, saying that the site is not available. It has a link to the site, and whenever I clicked, it redirects me to this thing OpenDNS.

  I tried loading the page with the default browser of chrome on this phone, but also my laptop using firefox and chrome and have not experienced this problem. Yet the problem persists when you try to access the mobile site through firefox.

  I have tried clearing the cache, uninstall and reinstalling, yet the problem isn't resolved. I have done a virus scan, thinking it might be some form of malware that is hijacking my search engine. That all comes back clean.
  

  I've never heard of OpenDNS, nor have I allowed it to become my search engine. When I go into the settings of search engine, it does not appear, but he manages to keep hijacking of my searches on google and redirect me sites that work normally.

  Please help me.

  Hi SuperRup91, I was able to reproduce this problem on Firefox Mobile on a wi - fi network using OpenDNS. Queries for a single word for non-existent domains + by pressing the arrow go back a page of results of OpenDNS. Typing a search suggestion next to the icon of Google for the word, or by using a query of several given word of Google results. Unless you can change to a different DNS provider, I think you may be stuck with these options.

• Cannot access wireless (WRT54GL) options

  Hello

  I have an AG214 ADSL2 router that I use for my desktop PC. However, I have now also a WRT54GL for wireless connection. I have connected the WRT54GL to my AG214 via ethernet. Everything works fine, I have the wifi and I can use it to connect to the internet. However when I go to my router (192.168.x.x) I can't be able to find a wireless tab to configure my wifi. The network now is unsecure and a default name (linksys). How to access my wireless settings? When I access my router, she goes to the AG214, do I need to access the WRT54GL? If so, how do I?

  Thank you for your time.

  What is the IP address of the AG214?

  How you you connected the WRT54GL the AG214? Which ports connect?

  The WRT54GL's default IP address is 192.168.1.1. Connect a computer to one of the LAN ports of the WRT54GL and open http://192.168.1.1

• Cannot access a Web site, but can ping IP addresses on the internet

  -With the help of Vista SP2 64-bit on laptop faulty.

  -Number of computers on the same network have access to the internet.

  -Tried several network interfaces on this laptop, but no luck for access to the network, wired or wireless

  -From this notebook, I can ping addresses Internet IP so the problem seems to be the side DNS.

  -Flushing DNS cache and reset the network interface.

  -Rebooted several times.

  What did I miss?

  Thanks in advance

  Hey easternguy,.

  Check if you can test the Web site by name.

  To do this:

  a. Click Start and type cmd.

  b. press ENTER.

  c. type the following command:

  ping hostname

  Ping uses name resolution to resolve a computer by IP address name. Therefore, if you successfully ping the IP address but you cannot ping a computer name, there is a problem with host name resolution, and no network connectivity.

  Case 1: If you can not ping the Web site using its address, follow these steps.

  In this case, try changing your host file.

  In the C:\Windows\System32\Drivers\etc Hosts files may be damaged or corrupted.

  Review the contents of your HOSTS file and compare it to the screenshot below. There is no need to worry about any line that starts with a # is ignored by Windows. In addition, the line "127.0.0.1 localhost" can be ignored without risk, because it is a standard input.

  

  Everything that appears in your HOSTS file without a # earlier this year, aside from the "127.0.0.1 localhost" line, should be regarded with suspicion when we try to diagnose the cause of the problem. The fastest way to test the involvement of HOSTS file is to just rename the host file. By changing the name of the HOSTS file, prevent us Internet Explorer to use it and so all problems caused by the file.

  Case 2:

  If you can ping external websites by IP address and name, but can't browse the web, probably your browser is misconfigured.

  Check that you do not have an incorrect Proxy Server affected necessary or not.

  For Internet Explorer, follow these steps.

  a. open Internet Explorer.

  b. go to Tools / Internet Options.

  c. click on the Connections tab.

  d. click the LAN Settings button.

  "e. uncheck both" "automatically detect settings" and "use a proxy server for your LAN '.

  This should be it.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista cannot access https Web sites

  Hello

  My friend Tommy has an Acer Aspire 5315 with an Intel Celeron 550 CPU and 1 GB of RAM.  Service Pack 2 for Windows Vista HomeBasic runs.  He got the computer in the United Kingdom but lives now in Australia.
  He wants to access his hotmail and facebook messaging, but can't.
  The http sites normal http://google.com/ work very well for him.  However, it seems that whenever he tries to use a Web site by using an https connection, it gets a "Internet Explorer cannot display this webpage" or equivalent.
  It connects via a Huawei E585 Pocket Wifi device - it connects to wifi then broadcasts a wireless internet connection to his computer.  He gets his internet through Vodafone Australia.  I have a similar device - a keen wireless thus N420.  It can also connect through it.  Its problems occur for both devices.  My internet works fine on my computer using my camera.  Therefore, it is not a problem of modem and is an internal problem to his laptop computer.
  
  All his problems occur in the same way for Internet Explorer, Chrome, and Firefox.  So it isn't a browser-specific problem.
  I have disabled the Windows Firewall.  He always gets the error messages.
  It is not * seem * to have a firewall installed, even if it was AVG free anti-virus installed.
  AVG Vault shows that he has been hit by at least 4 Trojan horses in the past.
  His computer is incredibly slow - processing both with the internet.  My internet is too slow, so this is probably due to a bad ISP.
  Web sites that work:
  http://Google.com/
  http://News.Google.com.au/nwshp?hl=en&tab=wn
  http://login.live.com
  http://Facebook.com
  Web sites that does not work:
  https://mail.Google.com/mail/?tab=WM (i.e. that by clicking on "Mail" on the google home page)
  https://login.live.com/ppsecure/post.SRF?BK=1336377356 (i.e. as soon as it hits "Sign In" on the windows live login page)
  https://www.Facebook.com/login.php?login_attempt=1 (i.e. as soon as it tries to connect on facebook)
  In addition the microsoft FixIt to places like:
  http://support.Microsoft.com/mats/windows_firewall_diagnostic
  seem to download, but not work.
  Any ideas on what could be wrong and how to fix it?
  Thank you!
   

  Hello

  1. what version of Internet Explorer you are using?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/956196

  Method 2:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/813444

  Method 3:

  Follow the steps from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/967897

• Cannot access a Web site

  Hello;
  I try to access my mail on Hughesnet, and all I get is a blank page.
  Here is the link: http://mail.hughes.net/zimbra/
  The parent page is: http://home.myhughesnet.com/
  All other sites & Firefox work well, and this is my first attempt to access this site in particular.
  I tried to turn off my AV protection, who did nothing.
  Any ideas would be certainly appreciated
  All the best,
  Steve

  I visited their community forum and almost had to laugh. Rest assured that the problem is without a DOUBT on their end. We will mark this issue as resolved, or if a moderator wants to delete it, that's fine with me.
  My apologies for wasting the time of so many people and many thanks for a large community full of people willing to help.
  All the best,
  Steve

• cannot access a major site of the UK insurance company

  I'm trying to access my account at www.legalandgeneral.com. I use the button "Connect" on the home page but after a while you get a message saying "Firefox can't find the server at entry.landg.com. I rang the company and told me as the had problems with Firefox and its Web site and try Internet Explorer. This produces the same result. Is it an intermittent problem or is there something more fundamental going on?

  Please update Firefox. Update Firefox to the latest version

• cannot access the web site driver for fingerprint sensor driver sp52354.exe

  Re HP model dv7-4280us, Win 7 Home Premium.  Caan can't discover fingerprint sensor.  I can't download thedriver-ACCESS web site.

  Hello

  You can download directly from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52354.exe

  Kind regards.

• One of the computers on the local network Windows XP cannot access a http site.

  I ping to the alpha-numeric address (on this computer) and ping uses a private IP address: 198.168.88.68 (all packages are lost).

  All computers on the LAN access correctly.

  When I ping at the same alphanumeric address on other computers

  They ping 204.38.19.76 and I successfully received all return packages.

  I connect using my Internet provider ADSL router. I know it does NAT and all my LAN computers get their IP addresses dynamically.

  I thought it was a problem of Internet Explorer, but after I discovered the computer resolves the ip address for the external address as a private IP address. I force the PC to get another IP address and also I had used: ipconfig/release, ipconfig / renew. And even by configuring it with a static ip address does not work.

  Hello

  I can solve it only in this way https://www.region9.telcel.com/smartdistribuidores/

  This is a secure (via https) site. seems to be a subdomain of http://www.telcel.com.

  Maybe this can help, http://support.microsoft.com/kb/813444

  Otherwise, you should try to talk to http://www.telcel.com support

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• N600 ea2700 cannot access internal Web sites

  I have a new router, n600 ea2700, replace a wrt54g2 for this.

  I have an internal Web server configuration, with port 80 redirection http to my iis7 Web with a server static ip address

  I can access my areas outside my internal network (IE my cell phone), but when I type in www.mydomain(s).com (one of them) in my browser on a wired computer or internal wireless I get "cannot display this page".

  I can ping the www.my... and get an answer to my router static ip (internet provider)

  I can type in my static ip of the Web server and get my splash screen for iis7

  I of the wrong with linksys phone and they could not understand, basically saying take the router at staples and get a different model.

  I think I'll ask here before I do it.  I would add that if I put the old wrt back I can't access no problem.

  Any ideas?

  Thank you!

  Sorry I misunderstood your OP.

  This is called "NAT Loopback" and is not available on the Smart Wifi routers.

  Honestly the firmware of the Wifi chip is not designed for custom networks from servers or DNS requirements.

• Remote VPN users cannot access tunnel from site to site

  Cisco ASA5505.

  I have a tunnel of site-to-site set up from our office to our Amazon AWS VPC.  I'm not a network engineer and have spent way too much time just to get to this point.

  It works very well since within the office, but users remote VPN can not access the tunnel from site to site.  All other remote access looks very good.

  The current configuration is here: https://gist.github.com/pmac72/f483ea8c7c8c8c254626

  Any help or advice would be greatly appreciated.  It is probably super simple for someone who knows what they're doing to see the question.

  Hi Paul.

  Looking at your configuration:

  Remote access:

  internal RA_GROUP group policy
  RA_GROUP group policy attributes
  value of server DNS 8.8.8.8 8.8.4.4
  Protocol-tunnel-VPN IPSec
  value of Split-tunnel-network-list Split_Tunnel_List

  permit same-security-traffic intra-interface
   
  type tunnel-group RA_GROUP remote access
  attributes global-tunnel-group RA_GROUP
  address RA_VPN_POOL pool
  Group Policy - by default-RA_GROUP
  IPSec-attributes tunnel-group RA_GROUP
  pre-shared key *.
   
  local pool RA_VPN_POOL 10.0.0.10 - 255.255.255.0 IP 10.0.0.50 mask

  Site to site:

  card crypto outside_map 1 match address acl-amzn
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 AWS_TUNNEL_1_IP AWS_TUNNEL_2_IP
  card crypto outside_map 1 set of transformation transformation-amzn
   
   
  I recommend you to use a local IP address pool with a different IP address that deals with the inside interface uses, now you are missing NAT are removed from the IP local pool to the destination of the site to site:
   
  NAT_EXEMPT list of ip 10.0.0.0 access allow 255.255.255.0 172.17.0.0 255.255.0.0
   
  NAT (outside) 0-list of access NAT_EXEMPT
   
  Now, there's a dynamically a NAT exempt allowing traffic to go out and are not translated.
   
  I would like to know how it works!
   
  Please don't forget to rate and score as correct the helpful post!
   
  Kind regards
   
  David Castro,
   
   

• Cannot access the Web site 'one' only. I built it, no sense

  For some reason I can't access one of my client's Web sites. I can communicate with everything and all other Web sites that I own or manage. I have a new install of Windows 7 Pro SP1 OEM. It makes no sense at all. I can update the site using my software and download it via their server, but may not display the changes. Their server 1 and 1 says it's my PC. I NEVER encountered this in 12 years on any of my PCS 8 different. Any help would be greatly appreciated.

  Hello

  The question you have posted is better suited for the MSDN forums. Please report the issue in the following link and check:

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  I hope that helps!

• AnyConnectVPN users cannot access remote vpn site-to-site

  Hello-

  We have two 5510 s ASA one in 8.4 (4) and the other to 8.2 (5) in a site to site VPN configuration. All internal traffic is working smoothly.

  A: site/subnet 192.160.0.0 - local (8.4 (4)) Site/subnet b: 192.260.0.0 - distance (8.2 (5)) VPN users: 192.160.40.0 - assigned by ASA

  When you VPN into the network, all the hits of traffic A Site and everything on the subnet A is accessible.

  However, the site B is totally inaccessible to users of VPN. All computers on subnet B, the firewall itself, etc. is not reachable by ping or otherwise.

  There are also some NAT rules weird that I'm not happy with that were created after that I upgraded the Site to ASA to 8.4

  A resident of the site: external 192.160.x.x: 55.55.555.201(main)/202(mail)

  Site B (in addition to site to site) is external 192.260.x.x: 66.66.666.54 (all)

  I've pretty much just the basic rules of the NAT for VPN, Email, Internet and site to site.

  What I need to add for the VPN access to the network from site to site?

  Here is my config NAT:

  NAT (inside, outside) static source DOMAIN_LOCAL DOMAIN_LOCAL VPN_Network VPN_Network non-proxy-arp-search of route static destination

  NAT (inside, outside) static source DOMAIN_LOCAL DOMAIN_LOCAL DOMAIN_REMOTE DOMAIN_REMOTE non-proxy-arp-search of route static destination

  !

  network of the DMZ_Network object

  dynamic NAT interface (DMZ, outside)

  network of the DOMAIN_LOCAL object

  NAT dynamic interface (indoor, outdoor)

  network of the EXCHANGE_Exchange object

  NAT static Outside_Mail (any, any)

  network of the DOMAINCTRL_DHCP object

  NAT (inside, outside) interface static tcp ftp ftp service

  Thank you very much in advance and I hope that I've been pretty thorough.

  Let me know if you need anything that anyone else. Thank you!!

  Theo,

  You don't need the NAT rules outside (depending on your configuration).

  Basically, you need to add the pool VPN L2L traffic and network remote to the ACL of split tunneling (if configured), also the "permit same-security-traffic intra-interface".

  Please let me know.

  Thank you.