Windows 7 disk management utility does not allow the creation of simple volume:

Similar Questions

• Windows 7 disk management utility does not allow for creating simple volume: maximum number of partitions exceeded error

  I am trying to create a new partition in Win7 using the disk management utility. Shrank lecteurC existing to create unallocated space. Am not able to create a simple volume with this space unallocated due to the following error message.

  "You cannot create a new volume in this unallocated space because the disk already contains the maximum number of partitions".

  How to fix this or go around with another method to create partitions?

  Hello

  You will need to convert the dynamic disk before creating the extra partition. To do this in disk management:

  -Right-click the disk 0 (gray area) which indicates the total size of your hard drive

  -Select 'convert to dynamic disk.

  Once you have converted to dynamic disk, you will be able to go and create the new simple partition.

  I hope this helps.

  Best regards, Damian

  Damian Coverly

• Why merge GUI does not allow the creation of less than 40 GB drives?

  Is there a reason, like the vmware command line tool - vdiskmanager.exe allows a minimum size of 100 MB?

  If there isn't a specific reason, the GUI can be changed to allow smaller drives.

  The smaller the VMware Fusion GUI using virtual hard drive I could do etait.11 GB or 112.6 MB so small how do you?

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.

  Application of program compatibility does not start

  I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.  What gives?

  If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.

  Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Satellite L100-120: Wlan does not allow the transmission of large data packets

  Satellite L100-120, Intel 3945ABG.
  Router Wi - fi is 3COM OfficeConnect Wireless, same problem with Dlink DI-524.

  By default my wi - fi card does not allow the transmission of packets of data.

  I use ping-f-l 1464 192.168.1.1 to check if it is possible to send a large package. All packages more then 600 large fail to be sent.

  It is tragically wireless performance and I almost cannot use internet at all. I solved the problem partially by setting the MTU to map wi - fi at 548. Connection is now stable, although I can not yet send massive emails. Anyway, it is not a good situation to have such a low MTU value.

  Everybody respected this problem?

  I think you will find the solution in this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15101

  I think the secret is the update of the BIOS!

• my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen

  Original title: green screen

  my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen. I tried all the options in F8 mode with no result. How can I fix it without losing any information on the hard drive?

  Hello

  1 - do you mean that you get the green screen even in safe mode?

  2 did you recent hardware or software changes to your computer before this problem?

  If you are unable to start desktop even in safe mode, then you try to perform the verification and startup repair.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

• the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  Hello

  You have used a form of e-mail field to create 'Appetite' section. This is the reason for which form registers an error as its not able to recognize an e-mail here entry.

  email form field is a required field for form of Muse. Please rename back to e-mail and also to create another field in form in the widget forum (go to the Option to form and enter a single-line text field) and it should work properly.

  

  Concerning

  Vivek

• The workspace page, loads, but does not allow the toolbar.

  Dear Sir

  I use the EPM11.1.2.2. The page of the workspace loads, but does not allow the toolbar with the "Explore". Can someone help me?

  Thank you

  Perhaps you have not installed and configured the components of the RAF.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Fingerprint utility does not recognize the password website - Satellite U400

  Problems with the password Bank (TrueSuite Access Manager, 2.5.29.0 latest version;) Vista); Utility does not work, does not recognize the Web site password entry, doesn't react at all. Tried it in IE8 and Opera 10, tried to reinstall Truesuite Access Manager. The fingerprint login works fine, very well file protection works.

  Someone at - it the same problem? Any ideas on a solution?

  Thank you.

  Thanks for the comments.
  If you have questions try to find answer using the advanced search options.
  In this forum, you'll find helpful advice a lot or comments about so many different issues with Toshiba laptops.

• Reinstalling an OEM of Windows XP version and it does not accept the PK

  Reinstalling an OEM version of Windows XP, but it does not accept the PK and no hardware changes were made.

  Check the letters and numbers carefully, do not confuse the letter B for number 8, letter O for the number 0, letter Q for the letter O.

  If it does not then help following XP forum post: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install?page=1&tab=all

  J W Stuart: http://www.pagestart.com

• I can't sync my iPod to Windows Media Player. WMP does not recognize the iPod and I can't drag music files between them

  My iPod is connected to the computer and it works fine with iTunes.  But I can't get the music in Windows Media Player to iPod.  When I try to sync in Windows Media Player, it does not recognize the iPod, and I can drag files from WMP to iTunes or the iPod.

  You cannot synchronize an Apple product in itself using WMP, unless you buy a 3rd party. You must use iTunes.

  See you soon,.
  Jerry

• I want to reinstall CS6 to a disk, but it does not accept the serial number

  I want to reinstall CS6 on my new Mac on a disk, but it does not accept my serial number

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

  In addition, IF El Capitan read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491