Windows 7 does not stop after updates

Similar Questions

• Windows 7 does not start after update

  My problem started with an automatic update in the last 48 hours. Worked well previously. After installing the update? I'm more able to start. BIOS works great and then Windows 7 hangs at the homepage. I tried to restore it on several points and now he is responsible for the paper painted and hangs there.

  Under Update installed, the newest I see one is June 11. I don't see the dates for updates of office 2007 etc..

  It starts in safe mode with network fine. I used the windows disk to start troubleshooting and restoration. Any ideas on the next steps? Not a problem before the updates. I'll turn off the automatic updates but you need to know how to precede to recover my computer

  Thank you

  Intel 7 2.8 GHz Windows 7 64 bit

  NVIDIA 480 6 GB of ram

  Hi PMMDOC,
   
  I assume that your system works very well after running system restore from the system recovery options .
   
  After the system restore, you can install the updates manually one by one to check the update is causing the problem to occur.
   
  If the problem persists, you can do the Startup Repair by using the Windows 7 installation disc. It will automatically fix problems that prevent Windows to start.
   
  If you want as follows to disable automatic updates , you can follow the steps from the link below. (not recommended)
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off
  Alternatively, you can install all updates in a clean boot State.
  
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• autorotation does not work after update 8, 1 wind - W510

  

  I have a tablet with docking station and 32 GB w510

  the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

  I ve installed the latest driver form acer download page and Windows update.

  then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

  What can I do?

  PS the camera does not work

  

  -solution for me! ----

  I don't know what happened, but I'll tell you what I did not last:

  I have the European version of Windows 8.1 N(without Media Feature Pack)

  1. reinstalled microsoft silverlight.
  2. search for update---> silverlight update available!---> installed!
  3. reset
  4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
  5. reset
  6. Search again---> new available updates updates---> installed
  7. reset!

  now, camera, autorotation and all the apps work for me. I hope this will help you

  Best regards

• Windows xp does not stop running, if you click on < close > to stop computer. How can I

  My Windows xp does not stop running, although I clicked on to stop to the bottom of the computer.

  I tried , but does not work.

  How can I recover the system quite the same for the last available time.

  Thank you

  Hello

  1. don't try to start the System File Checker?

  If not, then I suggest you to run that and then try to do system restore and check.

  Let us know the results.

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Dual booting of Z3 tone does not work after update Marshmallow

  Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

  I don't think he has a...

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Gyro does not work after update 6 Android on z3 D6633 double

  Gyro does not work after update of the marshmallow on Xperia Z3duos D6633

  Issue edited by Rickard

  @dipuvellara

  Could you try to restart in safe mode and test again?

• Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After I download and visualize the 'air - SDK - description.xml', the version is 21?

  Adobe AIR 22 beta (April 6, 2016), 'Download AIR SDK & compile for Windows' file does not? After that I have download and view the 'air - SDK - description.xml',

  < name > AIR 21.0.0 < / name >

  < version > 21.0.0 < / version >

  Hello

  We have fixed this problem. Please download a second time to get 22 AIR beta build.

  Thank you

  Krati

  Adobe AIR Team

• First Adobe Pro CC does not work after update code 0xc000001d

  First Adobe Pro CC does not work after update code 0xc000001d

  W7 OS 2

  Hi Gernots,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications