Windows 7 don't recognizese (of Kingston Data traveler) USB storage device what to do?

Similar Questions

• Kingston Data Traveller urDrive app works is not in Windows 7 64 bit

  I am using Windows 7 64 bit with Kingston Data Traveller 32 G DT 101 G2, v2.1.0.92 urDrive, error "this disc is not allowed to run the software.".

  Hello

  Look for the detailed event viewer error message.

  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I suggest you run urDrive app in a clean boot state.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note:  After troubleshooting, set the computer to start in normal startup mode to follow the link.

  You can also check this thread for more information:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Kingston-data-traveller-urdrive-app-is-not-working/51103b83-5de6-40e4-93a6-a6aff12d4dad

  Note: Please do not provide your e-mail address in this forum, as shown in the above thread.

• Kingston Data Traveller urdrive soft does not work

  Original title: Kingston Data Traveller urdrive app

  Does not load under win7 64-bit.   The application starts to load and then stops just... anyone?

  Hello

  It's Michael UrDrive team.  I'm sorry that you have this problem with UrDrive.  I would like to help but will need certain information in order to solve this problem.
  When UrDrive loading stops, you see an error message?  For example, you see a message "this disc is not authorized to run this software."?  The error message can be hidden behind other open windows.
  Can you tell me what the Kingston Data Traveler flash drive model you are using?
  Can you tell me what version UrDrive?  This can be found by: 1. from Windows Explorer, click the folder/drive associated with the flash player. 2. right click on the UrDrive.exe and select properties from the context menu to launch the urDrive.exe Properties window. 3. in the urDrive.exe Properties window, click the details table. The version of the product should be displayed.
  Could you please leave your email so I can contact you directly?  If you prefer, you can contact support UrDrive directly to * address email is removed from the privacy *.  Mention this message in your email.
  I hope hear from you soon.
  Best regards
  Michael

• How to install a driver for USB Kingston Data Traveler 100 G3 routine

  I failed to get the key USB Kingston Data Traveler 100 G3 work on one of my computers (Windows 7).

  But I have in fact on another computer and I found that this driver is signed by Microsoft Windows. The version is 6.12.7601.17577. The date is 2006-06-21.

  So I want just a site where I could download the driver routine.

  I finally received a response from a company of the retail, Claes Ohlson. There is a hardware thing lacking on computers more alumni who explains why the Kingston 3.0 will not work. It will make no difference, if I reinstall Windows. Kingston or other Zalman services could give me this answer. Neither Microsoft Community could give this answer. So I end the question.

• Data traveler USB Kingston G3. Recognized in device Mangager.

  Subsequently appears in my computer as removable disk , and are not accessible. It is connected to a hub USB 7 port powered via a 4-Port PCI card - USB 2. What can I do to solve this problem?

  Data traveler works in other PCs without worries.
  Have tried to uninstall all components USB, reboot and re-installation, etc.
  No problem display in Device Manager.
  The mobo had 4 port USB 1.1, which I disabled it in the BIOS.
  I have WIN HOME XPSP3, with all updates.

  Hi Vinod, n.

  Thanks for your information.
  After a long, frustrating period of USB problems and having all your suggestions and a lot of myself, I think I found the solution for the problem with a utility from the manufacturer of the motherboard.
  Gigabyte provides a set of utilities with their mobo installation cd. Included is a display of system utility, cpu temperatures. When I got it running in the background, he seems to have caused the problems I described with Kingston data traveler. Check with the activation of the utility (GWUM) and by inserting the traveler data, causing two of them to hang on. Disabling the GWUM and inserting the data traveler = no problem!
  Strange but true.
  Regards, Ray.

• Windows 7 is no longer reads the USB storage devices

  I have a problem similar to some other posts, but different enough so that I write it here.

  When I insert a USB storage device (like a Microcenter * Go Flash) Windows 7 Ultimate just shows a yellow exclamation mark next to the device in Device Manager. OtherDevices, USB Flash drive. Software update driver fails, no update.  Uninstalling and reinstalling has no effect.

  Under properties:

  Type of device: USB FLash Drive

  Maufacturer: unknown

  Location: Port_ #0003.Hub_ #0008

  Pilot wrote:

  Privder: unknown

  DAT: Not available

  Version: Not available

  digital GIS: dig signed ot

  Under Details:

  Hardware ID: USB\VID_1307 & PID_0163 & REV_0100

  USB\VID_1307 & PID_0163

  There is no ping, no popup. Nothing. All this used to work very well, and now, when I need to copy files to work urgrnetly, he's dead.

  Just rub a little salt, I CAN access the device through Linux in VMWare Workstation. But when vmware is not current execution, or when I disconnect and try to attach to host, nothing happens.

  I tried each storage device USB I can find and no luck on any of them.

  Thank you

  TMB

  After digging through the forums, I tried to copy the usbstor.inf and .pnf to the Windows\inf directory and reinstalled the driver through the Device Manager, and it loaded right up.

  I don't know, but I suspect that the impact of this change, there are other devices that can complain. For now, the process of transfer between W7 and VMWARE/linux seems flawless.

  TMB - back

• Deletion of data (step by step) USB storage device

  I need to know how correctly, step by step, remove a usb port connected data storage device. I am currently using, Windows visit Home Premium. Thank you...

  By the clock in the bottom right notification area, you will find an icon. Hovering over it said something like 'remove hardware safely '.

  Double click on this button.

  Find the usb storage device in the hardware list.
  Select this device.
  Click on stop / remove safely

  Wait until you receive a notification that can be removed.
  Remove the USB port.
  If so, you can now safely unplug unit from wall outlet as well.

  I hope this helps.

• Interruption USB Raw: flow of data between USB Raw Device and Labview!

  I do the USB communication between device (Microcontroller) Labview and USB RAW. I did all the things like the raw driver OR USB and I am able to get the 8 bytes using getusbinterrupt.vi, but my application requires continuous data transfer between pc and microcontroller, inorder to achieve that I put continuous loop in the microcontroller, so it transfers the data of continuos on pc, (in this case e.g.0 to 255 and again from 0 to 255 and so on.) , but I'm not able to get increment of 1 as written in my program, instead of that I'm getting increment of 5 to 10... is it because Microcintroller is very fast as my pc? If so how can I get continuous data without breaks...

  I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

  Like, I would also like to write to the device with labview, can you also suggest for this also? I read messages like:

  http://forums.ni.com/ni/Board/Message?Board.ID=170&message.ID=382144&Query.ID=445342#M382144, but I am facing the same problem as this user...

  Thanks in advance.

  MRS.

  26314362 wrote:

  I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

  MRS.

  Run a quick code continuous mode is completely unnecessary.

  In your code you continiousely who and unregster events, it takes a while, maybe the following will help to improve the code:

  

  I don't know, but you might be able to reuse the event.

  Tone

• Windows XP Pro not be assigned a number of hard disk to an external USB storage device

  I can see the SanDisk USB mass storage device manager devices under the USB connection or hard drives. But cannot see it in disk management.

  Screenshot here

  The site better troubleshooting for problems of USB that I found is this:
     <>http://www.Uwe-Sieber.de/usbtrouble_e.html >
  At the very beginning of the page is the problem "No Drive Letter".  Try to go through the suggestions.

  HTH,
  JW

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• in windows 7 USB storage device is showing again c drive not accessible

  I can't access the USB key, but it clearly shows in the management of the comp as drive c!  When I click it it just hangs.  I ended up ejecting

  Go to Disk Manager (run diskmgmt.msc) and see if you can change the drive letter assigned.

• Kingston 2 GB data traveler file erasure

  I have a 2 GB Kingston data traveler who has some pictures I want to erase, but I lost the manual.

  Any suggestions on how to proceed is appreciated.

  All the same way you delete all the other files, go to them and delete.  Unless this element has some sort of data locking mechanism, in which case visit the Kingstons for more information.

• After the synchronisation in a new installation window I don't see my data and bookmark and history

  Hello

  I synchronize my book.password, history of all time with firefox. in the last windows installation, I don't see any of my data. I properly connect and just reset my password and sync with my account. I need my info. If mozilla do place browser data backup, he can see what data and backup the data on pc and other services like this time.

  How can I access my data and why my data is disappear?

  Your password reset will erase your data synchronized. There is a warning on what appears before you start resetting. See the screenshot to view this message

• Windows Media Center: Photos are wrong / unknown Date

  Windows Media Center 12 with Windows 7.

  Displaying photos with WMC in chronological order, it shows a date of 01/09/2010.  This date is not on the information file, or within the Exchangeable Image File (EXIF) metadata format.  Whence this date?  I want to display the photos in chronological order according to the indication of date of file, such as 'Date Modified'.  There are tools out there to view and modify file dates and so dates EXIF, but I don't see whence this date 01/09/2010.  My smart TV is also picking up this date 01/09/2010 and it is why my photos are displayed out of sequence.

  I do digital images from slides using a scanner and then download on my PC.  The scanner is filling some EXIF metadata but no date.

  Whence this date?  Is he created somehow?  Is she on the Smart TV as well?

  Hello

  This can happen due to corrupt settings related to Windows Media Center. Try to repair Windows Media Center and check if it helps. Check out the link to do so:

  http://blogs.msdn.com/b/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  Note: Please make sure you backup the registry before performing the operations from the link above.

  Please let us know if the problem still persists.

• When I click on the + to open a new window I don't like the images that arise. I tried to change that in all: config; Browser.newtab.URL, but it will not

  When I click on the + to open a new window I don't like the images that arise. I tried several times to change that through words: config; Browser.newtab.URL. I put in the site I want and it won't change. I tried to put in: blank and it don't work. I'm obviously something wrong - can you help please?

  Thank you

  If Firefox is ignorant preference browser.newtab.url, the usual culprit is an extension.

  You can open the page in Firefox Add-ons using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons
  • in the Windows "Run" dialog box, type or paste
    firefox.exe "about:addons"

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Do not forget that all extensions are optional, none come with Firefox, and you can learn more about them by checking their reviews on the site of the Add - ons.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?