Windows 7 error Stop: 0x0000007E (0xFFFFF8001347FA1, 0xFFFFF880009A9258, 0xFFFFFFFFC000001D, 0xFFFFF880009A8AB0)
Every time I restart my computer, I get the blue screen of death (the title of this post is the error since the last restart code failed. System Restore does not work every time. Last known good configuration does not work. Usually, I just have to restart the computer several times until something finally works.
The accidents began to occur in February after a Windows Update (not sure one). A few days before that I had removed McAfee from the computer and installed Kaspersky, that came with my computer when I bought on Black Friday. I think it's probably one of those two things, the origin of the problem, but I have no idea what to do.
I restart my computer several times during and after the installation of Kaspersky and all seemed well until the update.
Any ideas?
Hello
When you have installed Kaspersky and uninstalled McAfee you probably went from the stove in
the fire. Franky, I would ditch as well in favor of Avast or MSE which are much more compatible. See
My recommendations in a message below.
Download and SAVE replacements but do not install before you delete these.
Download - SAVE - go to where you put these UNZIP if necessary - just right-click on - RUN AS ADMIN-
RESTART after each.
McAfee removal tool
http://service.McAfee.com/FAQDocument.aspx?ID=TS100507
Kaspersky removal tool-
http://USA.Kaspersky.com/support/home/anti_virus/208279463/?search=remove
=========================================================
Since you have a complex scenario here is what I would try to do.
Start mode safe mode using F8 as you start or do in regular windows when you can access.
Use a System Restore Point before you removed McAfee and installed Kaspersky. This should
also remove the influence of the issue of the possible update.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html
Then I would run the tool to remove McAfee as above and install Avast and MSE.
----------------------------------------------------------------------------------------
If subsequently, you have a problem to update or you want to manually - control panel - configuration
Updates - left superiors change settings - set to download and inform you. Once you're of course updates
are no longer a problem, you can reset to automatic.
If you need to remove an update - on right lower Installed Updates - uninstall.
Be sure to run the SFC and CheckDisk using the methods listed below.
=========================================================
For troubleshooting in-depth:
References to Vista also apply to Windows 7.
This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
generic methods in the next message and then return to the if necessary troubleshooting tool.
Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.
When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.
BCCode: 7F 0x0000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.
Common exception codes are:
0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
the Microsoft Windows Driver Kit (WDK).
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
Make sure you have enough disk space.
If a driver is identified in the bug check message, disable the driver or check with the
Reference of the manufacturer for driver updates.
Try changing video cards.
Check with your hardware vendor for updates to the BIOS.
Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.
If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the/debug switch.
In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
Hardware incompatibility. Make sure all new hardware that is installed is listed in the
List of Microsoft Windows Marketplace tested products.
Service system or driver faulty device. A service driver or defective peripheral system can be
responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.
You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and .chk files files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.
BCCode: 7F 0x0000007E<-- read="">
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.
As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002
or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html
BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.
You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html
You can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html
-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228
The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html
-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
Installation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233
Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htm
Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692
Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033
-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error imagescreenshot of error:
http://sdrv.Ms/Nn8gDA
memory dump file:http://sdrv.Ms/NiXJdJAlso, can you provide the latest files minidump since reinstalling the NIC driver.
-
I first thought that my hard drive went wrong, because it would not allow my to reinstall the Windows XP operating system on the hard drive. I get the blue screen of death. So, I went out and got a new hard drive and tried to install the XP operating system on the new hard drive. I had once more the blue screen of death! So I ask why it does this? I'm stuck!
Here is the error code information:Stop: 0x0000007E (oxc0000005, 0xF749D0BF, 0xF78E9208, 0xF78E8F08)PCR.sys - base at F7496000, datestamp 3b7d855c F749dobf addressPlease help me! I have a dell Inspiron 1520, if it's relevant somehow.original title: I need helpOK, then 'search' in the bios.
make sure that the bios contains specific data on time system, the RAM and the hard drive, IE. :
Make sure that the date and time is correct.
Make sure you installed the amount of memory shown in bios the amount real matches.
Make sure that the new hard drive and its size is denoted accordingly.
(go to dell.com and look for the model number. then go over the web pages on it and the faq on the bios and the size of the ram that came standard with the laptop)
-
Well my computer restarted automatically due to the automatic updates and now he continues to display the Blue error screen and at the bottom it says STOP: 0x0000007E (0 x 80537008, 0xBACCF508, 0xC0000001D, 0xBACCF204)
I did the complete diagnostic test and everything was fine, but the error always happens right as windows is about to start. Also, safe mode does not work as well. Does anyone have any ideas what to do to solve this problem?Quick fix is due to the Kernel patch KB977165 Microsoft applied through Windows updates;
STOP: 0x0000007E, 1st param 0xc000001D through Windows Update KB977165. Uninstalling KB977165 should fix.Boot from your Windows XP CD and start the recovery console (see this link http://support.microsoft.com/default.aspx/kb/307654 on how to use the recovery console)
Once you are in the repair screen...
Type this: CHDIR $NtUninstallKB977165$ \spuninst
Type this: BATCH spuninst.txt
Type this: systemroot
Type this command: exitYou can also do this with a Hiren's BootCD, except that you will need to open the file spuninst.txt manually and copy each line, paste it into a command prompt and let each line.
hope this helps,
Jason/guru -
Window update created an error STOP 0x0000007E... cannot start.
My Windows Update auto ran last night and said he had to restart... When it restarted I now have a BSOD with a STOP error message.
Error code reads Stop 0x0000007E (0xC0000005, 0x7D7FBB28, 0xF789E3E4, 0xF789E0E0)
I can't go to the last good Setup...
I can't switch to secure Mode...
I "want" to restore to a previous restore point.
I don't have a bootable installation disk...
I can download and burn the CD from another PC if necessary...
Any help would be appreciated... (Running Windows XP Media Center)
Networks of meridiansUPDATE - I have logged on to the Recovery Console and search for updates to Windows that were installed yesterday. (Go DIR $* the C:\Windows directory) Here are the updates that might be the problem:
KB971468
KB975560
KB977165
KB977914
KB978037
KB978251
KB978262
KB978706
Any of you who have the same problem verificarlo as well so that we can compare updates? I would go to the bottom of this quickly because I am sure that this is not the only machine I encounter today with this problem.
FIXED!
OK - I uninstalled a few updates and now the PC boots fine. The update that caused the problem is one of the following 3: KB977165, KB977914, or 978037. I started with my list above uninstallation of groups of 3 in time to limit. You will need a Windows XP installation disc to do this. Start out of him and enter the Recovery Console. To uninstall the updates to the recovery console, follow these steps:
1. change of the directories in the directory to uninstall update in question: at the C:\windows prompt, type ' CD $NtUninstallKB977165$ \spuninst "and press ENTER.
2 carry in the uninstall for this update script: at the prompt, type "BATCH spuninst.txt" and press ENTER. She runs the txt as a command script file.
I did for each the three edits I listed above (changing the KB... part to match the update I wanted to delete) and the PC boots into Windows without problem. Now, off the coast of research three updates to find out which Windows has broken one and why. Post and let me know if this helped some of you.
-
Why do I get a blue screen with the error STOP: 0x0000007E every time I turn on my computer?
Error message: STOP: 0x0000007E (0xc0000005, 0xB42E09AC, 0xBA4E39B4, 0xBA4E36B0)
Here is the text of the BSOD:
STOP: 0x0000007E (0xC0000005, 0xB0B9B9AC, 0xBA4DF8AC, 0xBA4DFSA8)Kbdclass.sys - address BOB9B9AC base at B0B9B000, DateStamp 48025372Some of the Stop line numbers change but their pretty much the same content. There is no C:\Windows\Memory.Dmp file on this computer. Sorry it takes so longThe Kbdclass.sys driver that is referenced is the keyboard class driver that is a component of Windows.
It is possible that the accident might actually be due to a third-party keyboard driver.
If you have installed a third party (for example. Keyboard Logitech driver) can update you or, if necessary, uninstall the third-party keyboard driver and see if the error resolves?
Article on Microsoft:
http://support.Microsoft.com/kb/313050
In accordance with article Logitech Mouseware software can also cause the error.
-
Blue screen error STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164)
Original title: blue, impossible to restart screen
System: Dell Dimension 3000, Windows XP Home - SP3.
Problem: I recently installed the new memory (now has 2G), check that the memory has been recognized and work. Computer worked fine for several hours, with a noticiable improvement. Then received warning from McAfee "A Trojan had been identified" and the computer had to be stopped to fix. Not sure if this was related to the new memory, but the moment was just a few hours apart. When I tried to restart the computer - I got a blue screen of death with the following technical information: * STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164). I can't start the computer in safe, except the Mode modes safe mode with command prompt and to my level of skills making me much good. Please notify. Thank you.
Hi mysticskier,.
Follow these methods.
Method 1: Disconnect all external devices such as printer, scanner, etc.
Method 2: Follow the steps in the article.
You may receive a Stop error on a blue screen when you start a Microsoft Windows Server 2003-based computer or a Microsoft Windows XP-based computer
http://support.Microsoft.com/kb/893239
You receive a random "0x0000008E" error message on a blue screen in Windows XP
-
Original title: XP questions
I am running WIndows XP Pro SP3 on a Dell Optiplex gx270s and get several error messages stop "Blue screen" intermittent and different at startup (for protect my computer). Prompt notification Windows found problems with the file system and run CHKDSK/F. I am unable to do so as I can not find my administrator password (also necessary if you plan to run from my XP installation disc). Windows Fix - It Center, running 'Folder & troubleshooting' reports icons randomly change the icons but no resolves not. I didn't notice the icons change and do not if this is related to Stop what error messages at startup, I've been doing. Running a disk check during start-up and Diagnostics IDE are not problems. It lasts for quite awhile and I've delayed just deal with it because it is not always the case. A lot of program installs / uninstalls and Microsoft Updates since its start if the system restore wouldn't do me any good. Before reinstalling the operating system, what are my options? Is there a way to reset my ' Administor password ", or better yet does not require one, (it is a personal computer for personal use only and I don't remember why a password has been assigned)?
Here are some of the error messages:
STOP: 0x0000007E (OxC0000005, 0x89AD8000, 0xA579CCB4, 0xA579C9BO)
BAD_POOL_HEADER
Technical information:
STOP: 0 X 00000019 (0X00000020, 0X89D5FDA0, 0X89D5DC8, 0X0A050002)
IRQL_NOT_LESS_OR_EQUAL
STOP 0X0000000A
(0x6750300C, 0 x 0, 00000002 00000000, 0x804FFDB6)
Hello
You did changes to the computer before this problem?
The administrator password cannot be reset.
See the following article for more information: Microsoft's strategy concerning lost or forgotten passwords
In the following troubleshooting steps may help you resolve this problem.
How to troubleshoot a Stop error 0x0000007E in Windows XP
http://support.Microsoft.com/kb/330182FIX: Error Message When you connect a scanner or a digital camera to a computer that is running Windows Vista or Windows XP Service Pack 2: "BAD_POOL_HEADER STOP"
http://support.Microsoft.com/kb/934177You receive an error message "Stop 0x0000000A" in Windows XP
http://support.Microsoft.com/kb/314063 -
Blue screen error: STOP: 0x0000007E (0 x 0000005, 0x86EFF5E7, 00xF7A7A7E4, 0xF7A7A4E0)
I tried F8 into safe mode and do anything (mode), I put it in, always comes back to the blue screen... Help, please...
Hey ninatc,
Here is an article from the Microsoft Knowledge Base that speaks of STOP error message 0x0000007E.
Follow the suggestions in the article to resolve the problem.
How to troubleshoot a Stop error 0x0000007E in Windows XP
http://support.Microsoft.com/kb/330182Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Blue screen, ERROR * STOP: 0x0000007E (0xC0000005, 0x824EC033, 0x88F03650, 0x88F0334C)
Hi, I turn on my laptop with windows Vista Home Basic (Compaq) and I get a blue screen with this error:
STOP: 0X0000007E (0XC0000005, 0X824EC033, 0X88F03650, 0X88F0334C)
I tried with safe mode and all the options that windows and compaq gives, but everybody works, do you know what I can do? I want only the files in the hard drive, there is a solution?
Thank you
I used a Windows XP Live CD to backup my files, clean the data and reinstall Windows Vista... because I can't correct the mistake x_X
Thank you anyway ^^ -
Hey guys
Since yesterday I've been doing these stop errors. So far I have at least every hour. I tried to use CC cleaner, but it did not help. Also, I restored my computer to before that stop error started, but that did not help either. They are yet to reproduce. There is not really any model to them either, they occur when I use chrome, regarder watch movies, no matter what. So I have not isolated a specific program. The only thing that I think could be what is torrenting, I was downloading a lot recently. But I never download questionable torrents and I always do a complete norton of the system scan immediately after and nothing was found. So could someone please advise me on how to solve this problem! Thanks in adavnce!
Hello
Try running the fix provided by Microsoft and check if the problem persists.
I hope that helps!
-
Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"
Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter
Hi all
I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801I couldn't find anyone with the same problems. Can you help me?Thanks in advance,We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.We prefer at least 2 DMP files to track trends and to confirm the cause.
Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at hereIf you have any questions regarding the procedure, please ask -
Now, I tried to do a clean install of the operating system, and while the machine is to load the required drivers from the operating system cd drive, I get this error message. Any help would be GREATLY appreciated. I'm really stuck!
Hi FootSoldierAZ,
· Did you do changes on the computer before the show?
I suggest you read the articles and check mentioned below.
"STOP: C0000221 unknown hard error" or an error message "STOP: C0000221 STATUS_IMAGE_CHECKSUM_MISMATCH".
http://support.Microsoft.com/kb/314474
Let us know if that helps.
-
Windows 7 error Stop 0 x 00000101
So I bought a new PC and installed windows 7. This machine works well with 0 problems for a few months. Last week I get errors listed below.
This is my machine.
Proc - Intel Core i7-860 Lynnfield 2.8 GHz, 8 MB Cache LGA 1156 L3
Motherboard - ASUS Maximus III Formula LGA 1156 Intel P55 ATX (update of the BIOS to 1305)
RAM - CORSAIR XMS3 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1600
Graphics - HIS H575Q1GD Radeon HD 5750 1 GB 128 - bit GDDR5 PCI Express 2.1 x 16
Running in CROSSFIRE (latest drivers)
Power - 850 watts.I use it for games, I do not on the clock. I play Battlefield 2142, Champions online, star trek online. Here, the kicker is when I play Warhammer Online with it, it's the only time I ever saw this error. I can run prime95 for days with no problems, I load the WAR, I have an accident anywhere from 30 minutes to 6 hours in game time.
I downloaded my DMP on my skydrive. http://CID-13583f9e59a8a31c.SkyDrive.live.com/Browse.aspx/BSOD%20errorsThanks for your help.
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-27 13:40:15
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QUADX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000001, 0x00000000, 0x807c5120). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022710-18080-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
8696
System
QUADX
00000101 0 x (0 x 00000019, 0x00000001, 0x00000000, 0x807c5120)
C:\Windows\MEMORY. DMP
022710 18080-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-27 11:57:12
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QUADX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000001, 0x00000000, 0x8abc5120). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022710-17238-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
8483
System
QUADX
00000101 0 x (0 x 00000019, 0x00000001, 0x00000000, 0x8abc5120)
C:\Windows\MEMORY. DMP
022710 17238-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-28 20:03:13
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QUADX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000001, 0x00000000, 0x807c6120). A dump was saved in the: C:\Windows\Minidump\022810-18033-01.dmp. Report ID: 022810-18033-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
11744
System
QUADX
00000101 0 x (0 x 00000019, 0x00000001, 0x00000000, 0x807c6120)
C:\Windows\Minidump\022810-18033-01.dmp
022810-18033-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-27 12:30:22
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QUADX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0x00000000, 0 x 00000019, 0 x 00000007, 0x807a3120). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022710-19936-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
8592
System
QUADX
00000101 0 x (0 x 00000019, 0x00000000, 0 x 00000007, 0x807a3120)
C:\Windows\MEMORY. DMP
022710 19936-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-28 21:52:23
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QUADX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000002, 0x00000000, 0x8cf00120). A dump was saved in the: C:\Windows\Minidump\022810-19531-01.dmp. Report ID: 022810-19531-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
12023
System
QUADX
00000101 0 x (0 x 00000019, 0x00000002, 0x00000000, 0x8cf00120)
C:\Windows\Minidump\022810-19531-01.dmp
022810 19531-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-28 12:24:14 AM
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QuadX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0x00000000, 0 x 00000019, 0 x 00000007, 0x807a3120). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 16504-022810-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
9412
System
QuadX
00000101 0 x (0 x 00000019, 0x00000000, 0 x 00000007, 0x807a3120)
C:\Windows\MEMORY. DMP
022810 16504-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-26 21:00:55
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QuadX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000002, 0x00000000, 0x8cf00120). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022610-20841-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
7703
System
QuadX
00000101 0 x (0 x 00000019, 0x00000002, 0x00000000, 0x8cf00120)
C:\Windows\MEMORY. DMP
022610 20841-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-26 22:18:45
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QuadX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000000, 0x8cf36120, 0 x 00000003). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022610-23322-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
7811
System
QuadX
00000101 0 x (0 x 00000019, 0x00000000, 0x8cf36120, 0 x 00000003)
C:\Windows\MEMORY. DMP
022610 23322-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-25 22:41:11
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QuadX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116 (0 x 90604960, 0 x 85490008, 0x00000002, 0x00000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022510-21481-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
7151
System
QuadX
0 x 00000116 (0 x 85490008, 0 x 90604960, 0x00000000, 0x00000002)
C:\Windows\MEMORY. DMP
022510 21481-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-27 10:24:36
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QuadX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000001, 0x00000000, 0x807c5120). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022710-21886-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
8173
System
QuadX
00000101 0 x (0 x 00000019, 0x00000001, 0x00000000, 0x807c5120)
C:\Windows\MEMORY. DMP
022710 21886-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-28 13:23:25
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QuadX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0x1000000a (0x00000002, 0x00000000, 0xc84f5b08, 0x82ad8e38). A dump was saved in the: C:\Windows\Minidump\022810-16536-01.dmp. Report ID: 16536-022810-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
11131
System
QuadX
0x1000000a (0x00000002, 0x00000000, 0xc84f5b08, 0x82ad8e38)
C:\Windows\Minidump\022810-16536-01.dmp
022810 16536-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-28 13:13:22
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QuadX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0x0000008e (0xc0000005, 0x900dc32d, 0xa0c4ae48, 0x00000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 022810-16926-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
11086
System
QuadX
0x0000008E (0xc0000005, 0x900dc32d, 0xa0c4ae48, 0x00000000)
C:\Windows\MEMORY. DMP
022810-16926-01
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-02-28 19:53:53
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: QUADX
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000101 (0 x 00000019, 0x00000002, 0x00000000, 0x8cf00120). A dump was saved in the: C:\Windows\Minidump\022810-19765-01.dmp. Report ID: 022810-19765-01.
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">
1001
0
2
0
0
0 x 80000000000000
11648
System
QUADX
00000101 0 x (0 x 00000019, 0x00000002, 0x00000000, 0x8cf00120)
C:\Windows\Minidump\022810-19765-01.dmp
022810 19765-01
I downloaded the MS debug tools of: http://www.microsoft.com/whdc/DevTools/Debugging/default.mspx
I analyzed many minidumps and they said that the question was maybe with 'dxgmms1.sys '.
I went to the MS site to update the latest patches of DirectX: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3
This solved my problem. Also note that this update is really improved how the WAR runs and works for me, it can also help for other games.
-
SCREEN BLUE ERROR STOP: 0X0000007E (0XC0000005, 0XF74F67C0, 0XF7A39528, 0XF7A39224)
I get a blue screen that reads (a problem has been detected and Windows has shut down to prevent damage to your computer) last night my computer started poping up saying windows my computer is infected every 2 minutes, it even changed my image of the desktop, I went and deleted the Windows defender thought it was the sorce , DID I SREW UP?
Hello
You probably have one of these fake antivirus programs that affect your system. Can you tell us what the
program who gave the alert was or if it was you heading? When you receive warnings, you might be
infected by is not a good idea to delete legitimate programs that help protect your computer.First makes sure you are clean if we don't need to know the answers to the foregoing.
It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Satellite M70 shows BSOD on startup
My M70 shows me a blue screen... "" "A problem has been detected and windows has shut down to prevent damage to your computer." " Make sure you have enough disk space. If a driver is identified in the stop message, disbale the driver or check with th
-
HelloI asked the GIS. Paul and reacted very quickly by giving me the addresses on the driver on my problems but I can not communicate on the same post I apologize if they reopen another. The GIS. Paul gave me this address for the audio drivers with t
-
I use hp g32, I can't able to install ubuntu 11.10 on my laptop,
Hello I use G32 with windows7 I tried to install ubuntu 11.10 in my book, it shows an error like "'windows Backend' object has no attribute 'iso_path'" what is the problem and what can I do?
-
Is it possible to use my HP LaserJet 4 with Windows 7 X 64? Is there a driver? I want only to print documents.
-
Once I connect after booting, my wifi doesn't connect for about 30 seconds or so, even if the automatic connection is enabled. It didn't happen when I was connected to the House, but since I started using a public network, this has happened. Any fix