LAST_CONTROL_TRANSFER: from 000007fefeb9a260 to 00000000771832d 0
ADDITIONAL_DEBUG_TEXT: Enable Pageheap/AutoVerifer; All of the [Is_ChosenCrashFollowupThread] attribute-based follow-up of the chassis: thread on [0]: [PSEUDO_THREAD]
I installed the oracle11g and configured the SQL Developer minor and the data correctly, but when I run a workflow, the window 'departure' appears all the time, can't walk in the phase of runing and also can not stop. For now, the only thing I can do is to kill the program in the Windows operating system.
Sometimes, when I kill the program and restart and restart run the workflow, it may be normal.
So, I would like to know why and how to sovle it?
Yes, there is a simple solution:
"To ensure that Workflow tasks Data Miner is visible in your user interface".
It is the window that displays the list of workflows that were run during the last day, and also all workflows running active and their completion percentage.
If this window is visible, if it is not blocked from viewing by another tab, then you will avoid your problem. If you do not see the window tasks of Workflow Data Miner at all, then go to the menu: Tools-> Data Miner-> make it Visible.
That should it appears in your user interface, then you should just make sure that it is fully visible.
SQL Dev 4.0 final version will be released soon, it will be difficult, so this problem is no longer a problem.
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Warning: If you need to temporarily disable the antivirus to install other software. You must enable the antivirus as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to virus attacks.
Disclaimer Clean Boot: boot allows you to check if any service or third party application startup is causing this issue. Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.
Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Let us know if you need assistance with any windows problem. We will be happy to help you.
I have a system that is used to run windows 7 well. Then I went to windows 10 and had problems after a major update soon after liberation. After that, my system did so, but I ran into issues. As a result, nearly a year later, I decided to try to go back to windows 7 with a completely new reinstall and re-upgrade. My windows 7 will not update and I miss all the tools that I can find as a substitute or a repair or cmd commands. The initial error is coded C80003FA. I did a lot of difficulties which seems to be similar to my questions and the Fix - it tool cannot find convenience stores. I also tried the standalone installer of windows and he found the fix, but could not install. After doing all the patches that seem relatable to me somehow, I now get the error code 8008005. This code came while typing, but other codes appeared as well.
Y at - it suggestions on what I can do or is there a way to help?
Thank you
SYSTEM:
Processor: AMD FX 8350 3.2 GHz
GPU: MSI R9 380 4 games
RAM: AMD 8 GB DDR3 RAM
Hard drive: Seagate 1 TB drive HARD drive
PSU: Corsair CX750
MSI M5A97 EVO Motherboard R2.0
Hi Harry,.
At this point we suggest is that reset you the Windows Update components. To do this, you can consult this article for steps to reset the Windows Update components
Update Windows (W7) asks to reboot all the time. I am up to date with all updates. There are usually deferred until 4 am, but sometimes not, and is called a reboot scheduled for 10 minutes. How can this be stopped? I tried to go back to a restore point, and then update again.
The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or eliminate problems.
What antivirus/antispyware/security products do you have on the machine? Include everything you've ALWAYS had on this machine, including those you have uninstalled (they remains of leave behind which can cause strange problems).
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program generates in Windows Vista cbs.log http://support.Microsoft.com/kb/928228
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
Optimize the performance of Microsoft Windows Vista http://support.Microsoft.com/kb/959062 To see everything that is in charge of startup - wait a few minutes without doing anything- then right click on taskbar - task manager - take a look at stored by - Process - Services - this is a quick reference (if you have a little box on) Lower left - show for all users, then check that).
Is a quick check to see who are loading method 2 - using MSCONFIG then after a list of these here. --------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects processes have open, which DLLs they have loaded and more. This unique powerful utility will show you even owned by each process. http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows starts. For each application, what follows the information is displayed: Type of startup (registry/Startup folder), Command - Line Channel file, the product name, Version, company name, location in the registry or file system and more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup. http://www.NirSoft.NET/utils/what_run_in_startup.html
Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, every window created by each execution of the statement program, if the window is visible or not. http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is Poster: load address of the driver, description, version, product name,. company that created the driver and more. http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit Maker as replacements and system manufacturer of device which are the most recent. Control Panel - write - graphics card - device manager the brand and complete model of your video card - double click - tab of the driver- Note the version information. Now click on UPdate Driver (this can do nothing MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT This will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard If there are 3rd party with their own software and drivers and the other main device drivers you have.
Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore) and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device their latest versions. (Look for the system to update the BIOS, Chipset and software updates Site of the manufacturer here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN -. REBOOT after each installation.
Always check in the Device Manager - drivers tab to be sure the version you are installation actually appears. This is because that some rollback of drivers before the later is installed (particularly that audio drivers) so install a driver - reboot. Make sure that it is installed and repeat if necessary.
Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR SCANNER - check manually by model.
If you update the drivers manually, then it's a good idea to disable driver facilities in the updates of Windows, which leaves on Windows updates, but it will not be installed pilots who are generally older and cause problems. If updates provides a new driver then hide it (right click on it) and then go get new ones manually if you want.
Refer to these discussions because many more excellent advice however remember to check your antivirus, the main drivers and BIOS update programs and also to solve problems with the first method cleanboot.
Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
I ran all the virus checking options available on the security of Microsofts site and I keep the Microsoft Security Essentials on all the time - I even uninstalled and reinstalled to double check but nothing takes away the "Debug" window
Does anyone know what is causing the "debug" window pop up and how can I stop from occurring?
Thank you very much
DW
Hi Donna,.
We will see if it is caused by something starting at startup or with some drivers.
Try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
Start in safe mode with network and see if the problem is here. A result allows us to narrow down the search for the cause.
I just bought a mouse yesterday, (explore touch limited edition). That is fine, but my problem with this one is the answer developed. from time to time when I try to move, it lags behind which is very irritating.
It happens in games, at the office, everywhere and all the time...
My windows 7 (64-bit) and I have already downloaded and installed the driver recommended but not luck.
any ideas?
Hello
You can perform the following methods and check if it helps.
Method 1: troubleshoot failures in the response to the mouse or wireless keyboard:
My laptop worked pretty well with Vista and XP it did not sound too, but since I installed Windows7 it her all the time.
And this is the worst that I know because I like it when it is quiet and no sound, but Windows 7 installed 2 days ago and it's all the time. Almost everything I do and yes I installed all the updates by the drivers of Toshiba.
Please can someone give some suggestions?
Thank you.
Hello
Can you also tell us what mean with her sound all the time? I put t really know what you mean.
Maybe you mean the Windows sounds. You can disable it in the control panel. Check this box!
can I view all the bookmarks of all time next to my home page, as the old windows 2003 could, I now have windows 7 & firefox 4. I love being able to see all my favorites all the time. Edit
A hard drive the HP dv2915nr laptop was dead. Installed a new hard drive and use the HP recovery CD. installs for 4 hours and then stops: Windows could not complete installation. Please re - install Windows again. Each facility is 4 hours. Because another install and it took 4 hours and then it restarts and stop at the same error. Now, I'm administrator (locked) - turn off when I pop in the recovery CD. Message: Your account has been disabled. Please, see your system administrator. I tried Safe Mode and loading Windows files stops at crcdisk.sys all the time and then restarts and displays: Windows could not complete installation. Please install again. Can't go in the office. Only restarts with these messages. Asked HP cat (3) Tech people and they do not have the answer. Said, could be a compatibility issue with the software. I ordered this CD of recovery on their part and he got yesterday. Now, they send in the laptop. So tried advice here. Please notify.
I found the answer. HP Tech Support Chat did not know the answer. When you run HP recovery CD, don't hit the restart WINDOWS button when it asks. The software will do it for you automatically. It will take a while (several hours 1-6 hours) to complete. You'll know it's done when WINDOWS ask you information of language, country and keyboard. In other words, don't touch anything once you start the restore CD program. Leave it alone and it will fix it for you. IGNORE the pop-up restart.
I can't believe HP has not even tell me that and 3 chat sessions with them was a waste of time. Last HP person ask me to send in the RECOVERY CD and the laptop.
I have an iPhone 5 c running iOS 9.3.5. Try to add music, but when I try to open the music player, I get an advertisement for the apple's music and the screen freezes. I can't access the actual music files (transferred from my PC via iTunes). I can s
I just did a restore on my windows xp system and am now trying to run the feature update for windows, but I can't go on the internet. I just get this error. the procedure entry point setdlldirectoryw could not be found in the library of links Dynami
The color of my cursor on the side and bottom of the screen is so light that I didn't. Almost transparent. How can I change the color, or make it darker? Thank you in advance. -sid