Windows 7 has high CPU usage and slow performance. Tried all the tips. no solution

Similar Questions

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• Recently FireFox often caused 100% CPU usage and locks until it finishes the process (the different). Clear the cookies/cache did not help. Any ideas?

  Windows 2000 SP4, 1 g RAM, Firefox version 9.0.1
  We keep IE6 and Firefox open simultaneously to 2 different email accounts. Firefox has always been much faster even with 3 or 4 tabs open, but for the past few weeks trying to update a screen suddenly CPU goes to 100% usage and of course nothing will move until the process is complete. Close one or more tabs does not help. If I close Firefox completely using the task processor Manager goes back down to zero. After restarting Firefox CPU use may or may not go back to the top as he tries to continue the previous task which has been lock him up.
  He did this with Firefox 3.6, but still it did not happen immediately after the 9.0.1 update either.

  Hi vbolton,

  Have you looked at the Knowledge Base article Firefox using too much memory (RAM) - how to fix the or Firefox using too many resources CPU - how to fix? There is a lot of information in there.

  Hope this helps!

• Printing blank pages and after having tried all the solutions in the solutions of HP

  Hello

  I print blank pages.  I tried to clean the printhead several times, and I've tried to unplug, Plug and waited 10, 20 or 30 seconds several times.  Nothing has worked.  Is there anything else I should try?

  Hello

  Cleaning print head for 3 times and then try to make the COLOR copy.

  If the printer still print the blank Page, then it could be the problem with the print head, where to call HP Tech Support (US) - 1-800-474-6836

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• I tried all the tips on the Firefox help site, but I can not even download anything. Yesterday, I was able to download and open PDF files very well. Today... No.

  While I was working on my Mac last night, I received a message that I had to download an Adobe (I think an Acrobat X Pro) update. Yes, I did. This seems to be the time when I started to have problems. Now I can't use the program uninstaller. I think that maybe that's the problem, but my ability to fix stops here.

  I am usually more discernment on updates, etc., but I was working on a project and the update flashing bothers me, so I hit Yes, not really looking at the app I was updating. Ugh. My mistake.

  Go to Firefox preferences, 'Applications' "Preview/application/pdf Documents. Click on the "Action" column and "history of (by default) use. The Adobe update apparently changed that preference to download.

• Why did FireFox flash black and then cause a huge CPU usage and crash?

  I don't know if this has been asked before, but on Windows 7, FireFox will cause a high CPU usage and the black flash and then crash. No idea why? Acceleration is disabled for the options and flash.

  Would help if we could read your Crash reports.

  Please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID that begins with a bp - then go back to your forum question and paste the ID into the box of "Post a reply".

  Note: If a recent report ID does not begin with bp - click it to present the report.

  (Please do not take a screenshot of your plant, just copy and paste the ID.) The image below is just an example of what your Firefox screen should look like).

  

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• problem with high CPU usage audiodg.exe

  While playing the game, I get a message saying that I raised the CPU usage 99% of the base. This is caused by "audiodg.exe. I tried a few bugs that I found online. I was told that they would not work with my computer. I have a Dell XPS15 second-generation i5. Has anyone experience this problem?

  Hello

  1. what you did to solve the problem?

  audiodg.exe [Windows Audio Device Graph Isolation] file hosts the audio engine for Vista and Window s 7.

  All DSP [Digital Signal Processing] and audio processing is done within this file. Suppliers are able to install their own audio effects and DSP in the audio pipeline, which is then processed by audiodg.exe

  In order to correct the high CPU usage, disable audio enhancements addressed by the file audiodg.exe. To disable the audio improvements, follow these steps:
  a. right click on the speaker in the lower corner icon right.

  b. Select the playback device from the menu. A list of devices should appear on the screen.

  c. double-click the device that has a green check mark. The properties for the device windows should open.

  d. click the improvements at the top.

  e. in the list of improvements, uncheck all the, or check Disable all improvements.

  f. click on the OK button to save your changes and close the window.

  g. click OK to close the devices window of reading.

  I would also say that you use resource monitor to monitor the CPU usage.

  Resource monitor is a tool that allows you to analyze the use of the CPU, disk, network, and memory in real time.

  You can use the performance tab in the Manager of tasks to see how the CPU of your computer is used by Windows and other programs running on your computer.

  Reference:

  See use of CPU utilization and other performance information

  http://Windows.Microsoft.com/en-us/Windows7/view-CPU-utilization-and-other-performance-information

• Flag 23: Dealing with "high CPU usage." How can I reduce this?

  Hi, I have a HP Pavailion 23 which has been given to me as a gift. Therefore, I don't know. All I know is I'm a player who likes to play games based on Java and possibly watch the videos at the same time, when I try to do the lagg is important. I get notifications saying that Chrome has high CPU usage. I read something about changing my BIOS settings? I'm not sure.

  I would appreciate help on this. I have dealt with the hand of single task Forcers and I find it quite annoying.
  Thank you!!

  Geez... No love. ?

• Q180 high CPU usage problem

  My new Q180 shows CPU usage by at least 40% all the time in the Windows 7 Task Manager. Sysinternals Process Explorer show that this is due to more than 25% of material interruptions happening all the time.

  Everyone sees these problems / symptoms?

  
  

• When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "

  original title: xvidcore.dll not found.

  Nice day

  When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "  The screen becomes blue white.  I am operating Windows XP SP3.  Any advice much appreciated

  Thank you, Brian Newman

  No guarantee, but it might be interesting to try to download
  and install the XviD Codec:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/
  (name of the file to download: Xvid - 1.3.2 - 20110601.exe)

  Good luck...

• High CPU usage by "System outages" and missing keystrokes in IE on all new HP laptop 15-r085nd

  I recently bought a HP15-r085nd (Win 8.1 with Bing), and right out of the box, I encountered this problem:

  After the awakening of the mode (usually after the first time to wake from sleep mode, but always after the second time), the process "System outages" has high utilization of the processor, up to 45%. The laptop then responds very, very slow. In addition, in Internet Explorer (but only in Internet Explorer, it seems!) strikes are missing out.

  I tried the following:

  -Implementation of all the updates of Windows, all McAfee updates and all of the updates from HP Assistent. No results.

  -Reinstall all the drivers, no results. Windows system restore: no result. Factory reset the recovery partition: no result. Then implemented all the updates again: no result.

  -J' tried to use Microsoft Xperf to diagnose the problem: it seems wdf0100.sys to blame for the high CPU usage. (In other words, if I have interpreted the results in the right way).

  -J' then did some troubleshooting with Microsoft Support: they asked me to disable all startup items in the Task Manager and disable all non-Microsoft services in msconfig. The result was that the high CPU usage of "System interrupts" occurred less frequently after the first time out of the way 'sleep', but still she always had after the second time to wake off mode 'sleep'. Uninstallation of McAfee seems to have the same effect, by the way.

  -J' then did some troubleshooting with the store were I bought it. They used a pilot program to install newer versions of the drivers. Also, in vain.

  Then they gave me another laptop of the same model (r085nd). It had exactly the same problems. So I think that all laptops of this model have the same problem! Does anyone know of a similar case with a laptop similar?

  -J' then did some troubleshooting with HP support. We have updated the BIOS (F.24), without result. We have made a few updates to additional drivers on the HP site, no results. We wanted to update the graphic driver Intel HD (sp65598), but we couldn't install it, an error message saying: minimum system requirements were not satisfied.

  I hope that the HP support can arrive at a solution (they wanted to deepen this). If so, I'll promise to post it here, because it affects probably other r085nd HP as well.

  In the mean time, I'd appreciate any suggestions, because I'm totally confused now. Someone at - it ideas? I will answer all the answers!

  I was contacted by HP Support again. After a new series of updates which included some updates everything new on the site of HP is solved the problem with high CPU usage by "system outages"!

  We have done several updates, so I know not that exactly solved the problem, but it is those:

  -New firmware BIOS: version F.33 (my bet would be that is the one that solves the problem)

  -New Intel chipset driver: 1.20 (sp69575.exe)

  -New driver Intel HD Graphics: 1.20 (sp69589.exe): 10.18.10.3958 (this one tried earlier, without solving the problem)

  -New driver Realtek card reader: 1.20Ap3 (sp69610.exe)

  I hope this helps other people with the same problem.

  Thanks to the HP Support team for their help with this problem!

  Moreover, the problem of lack of strikes in Internet Explorer (more use of CPU (any reason), the sequences of keys more are not registered!) still exists! I work around this problem by using Google Chrome. Again, I hope that this issue might get resolved as well! I nevertheless marks it as "Resolved" as the main problem is resolved.

• memory leak Winlogon.exe and high CPU usage

  I use Windows XP SP3. I'm leaking memory in winlogon.exe (about 5 M/hour). In addition, the CPU usage spikes to 50% of all 6 seconds. The file is properly signed so probably not a virus.

  This problem started after the application of last weeks patches.

  I seriously doubt that winlogon has a memory leak or people around the world would be screaming about it... and they are not.

  If this is what a thing look like, then you have another problem - probably a malware infection, or what you are currently using antivirus/antimalware protection is afflicted.

  Looking at previous answers, I would say that McAfee is afflicted, and it is already a well know that McAfee is a memory and CPU hog and you may want to consider replacing with something of less intrusive as Microsoft Security Essentials (do you use McAfee?).

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  What do you see (exactly) that you don't think you should see, and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, restart and fix any problems.

• Oracle documaker 12.4 and 2.7 - high CPU usage IDS

  Hello

  I have the below two questions when we installed the documaker 12,4 and IDS2.7 in AIX server.

  -1st edition: We have updated the forums such as 2 under article DocumentServer of the docserv.xml. Ideally only two instances of documentserver must run max since we did not have the load balancing. But we are able to see 5 instances that are running on the server. Here's the docserv.xml entries.

  < section name = "DocumentServer" version = "2.3" >

  < input name = "StartCommand" > java < / entry >

  < nom d'entrée = « StartArguments » > - Xmx1024m - agentpath:/appshared/dynatrace/agent/agent/lib/libdtagent.so=name=AIG-APPS_IDS_DocucorpServer_auchasepcg202_CIP-QA,server=auchasepcg201.r1-core.r1.aig.net:9998-Ddsimessage.debug=Y-Dmarshaller.output=n-Djava.endorsed.dirs=lib/endorsed -cp lib/DocucorpStartup.jar-Dids.configuration=docserv.xml-Dlogging.configuration=logconf.xml com.docucorp.startup.Startup com.docucorp.ids.DocumentServer < / Entrée >

  < name of entry = "StartDirectory" >. < / Entry >

  < input name = "Instance" > 2 < / entry >

  < input name = "FileWatchTimeMillis" > 10000 < / entry >

  < input name = "FilePurgeTimeSeconds" > 3600 < / entry >

  < input name = "MaxUpTimeSeconds" > 1800 < / entry >

  < input name = "FilePurgeList" > filecache.properties < / entry >

  < section name = "SNMP" >

  < input name = "Enabled" > not < / entry >

  < input name = "MasterAddress" > localhost < / entry >

  < input name = "MasterPort" > 705 < / entry >

  < / section >

  < / section >

  < section name = 'Watchdog' >

  < section name = "Configurations" >

  ["< section name = 'Router' requires="//section[@name='BusinessLogicProcessor']/section[@name='messaging']/section[@name='http "]" > "

  < input name = "StartCommand" > java < / entry >

  < input name = "StartArguments" >-Djava.endorsed.dirs=lib/endorsed lib/DocucorpStartup.jar - Drouter - Xmx1024m - cp - Dids.configuration = docserv.xml - Dlogging.configuration = logconf.xml com.docucorp.startup.Startup com.docucorp.ids.router.IDSRouter < / entry >

  < name of entry = "StartDirectory" >. < / Entry >

  < input name = "ReplyWaitSeconds" > 30 < / entry >

  < input name = "MaxMsgLength" > 4194304 < / entry >

  < input name = "MaxConnectionAttempts" > 2 < / entry >

  < input name = "Address" 127.0.0.1 > < / entry >

  < name of entry = "database" >

  < input name = "enabled" > false < / entry >

  < input name = "class" / >

  < input name = "URL" / >

  < input name = "userid" / >

  < input name = "password" / >

  < name="debug.sql.driver"/ entry >

  < / section >

  < / section >

  < / section >

  < / section >

  -2nd edition: Some instances of document server keep running, and no closure. Here are the problematic process id.

  Process ID: 14155952

  The process id continues to run almost 10 hours and we need to kill this process manually id.

  Process ID: 5636292

  The process id continues to function of the and we need to kill this process manually id.

  According to our docserv.xml, we gave the < input name = "MaxUpTimeSeconds" > 1800 < / input >. So it must recycle every half hour automatically and the process must be killed automatically. Where these processes keep on running and consuming more CPU usage and by creating the javaheap dump files. We found that many threads created by the process ID's

  Help if faced you this scenario before.

  In order to limit maximum number of instances of defined this value in configuration docserv.xml:

  2

          2

  Of course, you must use the number you want, not necessarily 2.

  Others that own, there is not enough information in what you have described. But too many cases started by IDS could potentially cause higher than normal CPU usage. The formula for default instances of max was changed at some point be proportional the number of CPUS in the system and on some occasions, it causes too many to be started. This setting will limit the total number of occurrences.

• 100% high CPU load and memory usage

  Hi all

  My company bought a new appliance IPS 4510 and after initial installation, I see that the CPU load and memory is 100%. The device is not in a production network. Is this normal or there is a hardware problem? Enjoy a Counselor about it.

  Concerning

  Christine

  Hi Damien,.

  It is actually normal behavior for an IPS sensor.

  To measure the actual load of an IPS sensor, you will want to monitor the "percentage load treatment" of the analytical engine that processes all inspection processing for the sensor.

  You can view these statistics by using the command 'display the scan statistics-engine '.

  Also, the sensor running version 7.0000 E4 5,0000 E4 (or later version), you can check the load percentage value Inspection displayed by the command "Display inspection-load" in its place.

  Hope that answers your query.

  Cyril Shankar

• searchindexer.exe extermemly high CPU usage - days

  Not sure that to do, I rebuilt the index, manually deleted the record of data to index, completely removed, rebooted, and then reinstalled Windows Search from the Add/Remove Windows features, I also chkdsk/f had my records.

  When the Searchindexer.exe uses as much CPU as she can I checked with resource monitor and it is not read to leave or by writing to all files, just chip away cycles CPU.

  Edit: more information

  I created a dump of the searchindexer.exe and its opening with a debugger tool, it is the content

  Microsoft (R) Windows debug 6.2.9200.16384 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [S:\Tools\SearchIndexer.exe.dmp]
  User Mini with full memory dump file: only application data is available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows 8 Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: SingleUserTS
  By: 6.2.9200.16384 (win8_rtm.120725 - 1247)
  Computer name:
  The debugging session: Sun Nov 4 22:01:24.000 2012 (UTC - 07:00)
  System Uptime: 0 days 10:09:39.102
  Running time: 0 days 0:54:31.000
  .........................................................
  Loading unloaded module list
  ..........
  ERROR: The symbol file is not found.  Defaulted to export symbols ntdll.dll.
  ERROR: The symbol file is not found.  By default for exporting symbols for KERNELBASE.dll -.
  ntdll! NtWaitForSingleObject + 0xa:
  000007fc ' ret 5b172c2a c3

  also, I checked the thread problem in hacker process, here is the stack:

  0, ntoskrnl.exe! SeAccessCheck + 0x1ef
  1, ntoskrnl.exe! KeDelayExecutionThread + 0xc32
  2, ntoskrnl.exe! KeWaitForSingleObject + 0x1cf
  3, ntoskrnl.exe! _misaligned_access + 0 x 809
  4, ntoskrnl.exe! SeAccessCheck + 0 x 280
  5, ntoskrnl.exe! SeAccessCheck + 0x4d1
  6, korwbrkr.dll! DllUnregisterServer + 0x2f48
  7, korwbrkr.dll! DllUnregisterServer + 0x243e
  8, korwbrkr.dll + 0 x 12173
  9, korwbrkr.dll! DllUnregisterServer + 0 x 1696
  10, korwbrkr.dll! DllUnregisterServer + 0x62f9
  11, korwbrkr.dll! DllUnregisterServer + 0 x 6117
  12, korwbrkr.dll! DllUnregisterServer + 0x5db9
  13, korwbrkr.dll! DllUnregisterServer + 0 x 5882
  14, korwbrkr.dll! DllUnregisterServer + 0x6fa0
  15, mssrch.dll! DllGetClassObject + 0x3feba
  16, mssrch.dll + 0 x 19425
  17, kernel32.dll! BaseThreadInitThunk + 0x1a
  18, ntdll.dll. RtlUserThreadStart + 0x21

  I also deleted my Outlook data files and started from scratch with my emails, and makes sure the data folders are not on a concert.

  I installed all the updates that are available for Windows 8 and I also ran sfc/scannow.

  I would be grateful if anyone could offer any help at all, thank you.

  Hi entire,

  disable the service in the Services, restart the computer and then re-enable the service.

  I tried, I completely uninstalled from Windows Add/Remove Features service, rebooted the PC and re - he added, and same deal.

  Anyway I found is what the problem is, it's the korwbrkr.dll, it seems to be related to a Korean dictionary, as if the indexer is you are trying to index something with characters Koreans inside (not aware that I have something like that), and he throws a loop for I renamed the korwbrkr.dll to korwbrkr.bak and it has linked the dictionary file and removed from the search index and I allow the indexer to run all night and it shows that indexing is complete, and I have no more high CPU usage.

  I was dealing with high utilization of the processor of the indexer for weeks, now my system is at peace.