Windows 7 initialization is always taking on new Machine

Similar Questions

• How to install Windows XP without service pack in my new machine with a hard drive sata and sata dvd?

  Installation problem

  Hello

  Not much to go here, but I'll try my best.

  First of all, I hope that your PC has a floppy drive. If it isn't, this isn't the end of the world, but it will make things much more complicated.

  Second, you must make sure that your motherboard BIOS is set according to your desired disk configuration. AHCI or RAID is the best but RAID is only if you want to set up a RAID. If you select IDE maybe you don't need the Setup F6 disk and the driver installation mentioned below.

  You have perhaps been provided with F6 floppy by your motherboard manufacturer but, if not, download the XP driver for your SATA controller from the manufacturer's web site and create your own F6 driver diskette.

  You must start your PC from the windows CD. Very shortly after the installation starting to show prompted to press F6 to another pilot. You have to hit F6 when you see this prompt. A few minutes later you will be asked to insert the Setup disk and identify your SATA controller. You should be able to continue with the installation later.

  It is a simplified version of what needs to be done and only goes up to get the installation to begin.

  If you want more specific help you should repost with exactly what installation problem that you are experiencing.

  Tricky

• Open a new window of the browser always puts an FLV (0bytes of a youtube vid) previously seen on the desktop. 18.02 Firefox

  Open a new window of the browser always puts an FLV (0bytes of a youtube vid) previously seen on the desktop. 18.02 Firefox

  seen the vid yuotube yesterday. delete all the flv on the desktop.
  even today, a new window always puts the same empty file from yesterday.

  any suggestions?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I don't think I should have to pay for the new Windows program. I always have an active product key. What can I do?

  XP came with my laptop. Now I have to start all over again and get a new hard drive. The rescue disc does not work and I can't get a new manufacturer, my computer is too old. I don't think I should pay for a new Windows program. I always have an active product key. I would like to get the program from Microsoft using my current key. What can I do?

  XP came with my laptop. Now I have to start all over again and get a new hard drive. The rescue disc does not work and I can't get a new manufacturer, my computer is too old. I don't think I should pay for a new Windows program. I always have an active product key. I would like to get the program from Microsoft using my current key. What can I do?

  I do not speak for Microsoft. However, I saw many times when working with clients in your situation with regard to the reactivation of windows because of the failure of a component. They are not, however, responsible for providing you with a windows disc that should be provided by your computer manufacturer. However, if I were you, I would ask to borrow a disc of windows of a friend or a neighbour then contact Microsoft for activation, making sure to explain the circumstances surrounding the re-setup.

• Launch BTF in a new window via URL - always creates a new instance of the AOS?

  Hello

  JDeveloper/ADF 11.1.2.4

  I use the method documented by Frank Nimphius to open a workflow bounded in a new window. The difference in my case is rather than a range of remote data control, I want the new window to share the same instance of module app launch window.

  My BTF has Transaction < controller Transaction No. > the value and scope of data control is a shared value.

  When I run the first page (in the unlimited workflow), a new instance of AOS is created as expected.

  When I click on the button to launch the window with the stubborn workflow, another instance of AOS is created.

  The problem is that in the request module original I stored some status information in the user session data (and I coded the passivation/activate process to handle this). Unfortunately, the second instance of AOS has no access to these data. User session data is empty and no activation process is triggered to complete.

  I can use the Andrejus Baranovskis method to inject the session data in the new instance AM using a custom control of Data Factory, but it seems unnecessary to instantiate the second AM when the first could be reused.

  Is it possible I can configure the system to share the app between two windows module? If you start a BTF via a URL will be always instantiate a new App Module, regardless of the settings of transaction?

  Thank you very much

  Kevin

  Hello

  I connected an SR for this and the answer is that this is normal. A new window will always cause a new instance of AOS to create.

  See you soon,.

  Kevin

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• I can't run activision 1994 shanghai game eye of the dragon II on the new machine of windows 7. It ran fine on the XP machine

  My 1994 shanghai eye game activision II of the dragon does not not on my new machine of windows 7.  It ran fine on the XP machine.  I used the windows troubleshooting utility for the old software and indicated he was running very well on XP service Pack 2, but convenience store said activision shanghai II is not compatible and advised me to come here for to help.  Thank you

  You can always try Compatibility Mode.

  Right-click on the game. EXE file and head of real estate. Then go to the Compatibility tab, check the "run this program in compatibility mode for:" box, and then select from the drop of the version of Windows the last game ran (try Windows XP Service Pack 3, and work toward the bottom.)

  Another option is to run the wizard that determines what settings to use. On the Compatibility tab, click on "Help me choose these settings", and then follow the on-screen instructions.

• How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on

  How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on.

  I got this without my notice:
  Administrator
  Administrator.User
  Administrator.User.000
  Now, I want to go back to my old files with the first administrator account. Also, I would like to know why.

  Hello

  Thanks for the reply.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view &gt; customization window. So, how manually open a new tab in FF9?

  Question
  I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

  To open the window to customize the toolbar, do one of the following:

  • Firefox button > Options > toolbars
  • Press ALT or F10 to temporarily show the Menu bar and choose from there (view > toolbars > customize)
  • Hold DOWN the ALT key while pressing the VTC keyboard letters

  See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36

  Regarding the new button tab, you see the end a '+' after the last tab or the right of the tab bar? This is the icon of the new tab.

  • CTRL + T will open a new tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• in firefox 8, how to configure my tabs to always open a new Web page in a tab next to the one I am currently

  Currently Firefox always open a new url in the tab THAT IS CURRENTLY OPEN. I WANT IT to OPEN in A TAB NEXT TO THE ON that IS CURRENTLY OPEN. How do I DO THAT?

  Intermediary by clicking the mouse button or by maintaining the CTRL on the keyboard and left-click, also open links in a new tab.

• Installation of Windows XP on new machines

  Hey, does anyone know if the latest machines Toshiba supports the installation of Windows XP,
  It is commonly accepted to support only Windows 7 and OS later?

  I tried to install Windows XP Pro SP3, 2008 version on the machine Satellite C660 released in 2011.
  and he crashed at the beginning of the installation. Is it possible that the Bios prevents
  forcing to work with Win 7?

  Or some drivers are missing in XP installation package, which makes XP incompatible with HW?

  On this forum, you will find number of threads where you can find answer to your question and also good explanation how to do to install Windows XP Home edition on the new laptop models.

  > I tried to install Windows XP Pro SP3, version 2008 on the satellite C660 released in 2011.
  and he crashed at the beginning of the installation.
  I assume that it happens because of lack of driver SATA. It must be loaded with F6 before installation of WXP begins. You can also create the installation disk of Windows XP Home edition with the integrated SATA driver. How to do this you can read
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  If you have any other questions you are welcome.

  By the way: you have created recovery DVDs before you started the installation of Windows XP Home edition?

• My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  If you forget to say 'thank you '?

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  0 x 80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT component store is in an inconsistent state.

  TaurArian [MVP] 2005-2010 - Update Services

• Whenever I try to find new updates for my computer error 80248009 appears under Windows Updates. I have not installed new updates on my computer in a month because of this problem. How should I do so that I can update my computer?

  Whenever I try to find new updates for my computer error 80248009 appears under Windows Updates. I have not installed new updates on my computer in a month because of this problem. How should I do so that I can update my computer?

  Error when you try to use Microsoft Update or Windows Update Web sites to install updates: "0 x 80248009":
  http://support.Microsoft.com/kb/956700

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows cannot initialize the device of this hardware driver. (Code 37)

  Windows cannot initialize the device of this hardware driver. (Code 37)
  There is no upper or lower filters in reg.
  external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
  How do I solve this problem

  Hello Rajendra Aagarwal,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

  Method 1: Run the Fixit and check

  Hardware devices do not work or are not detected in Windows (Fixit)

  Method 2: Check the steps to get the 37 error code

  Explanation of error codes generated by Device Manager in Windows XP Professional 

  Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW