Windows 7 InputPersonalization 1/2 to 3 hours

I have always used a Wacom tablet and the recognition of Scripture (Tablet PC Input Panel) with my current laptop. Recently, the InputPersonalization process was much more frequently running and for a time sometimes hours. The drain on the system is still about 50%. Other tasks become slow because of this, not to mention the portable fan go on full tilt all the time.

I don't know what did this start happening, and I'm not a computer wiz. Can I temporarily stop run in closing the process in the Task Manager but it reappears soon low-use, then after some time once more ramps upward for the use of the system by 50%. In the resource during the time monitor InputPersonalization going nuts, it's show about 625 000 KB 750 000 KB in memory for commit and working set.

Any ideas on what I can do?

Thank you.

Hello

Thanks for posting your question on the Forum of the Microsoft community.

I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Are all the device drivers and Windows updates are updated?

  2. You did it all changes before the show?

If it helps, try the methods and check them off below.

Method 1

As you mentioned in your message that your PC is slowing down or freezing then you can automatically diagnose and repair problems that slow down your computer by running the fixit provided in the link below.

Difficulty of Windows system performance slow computer problems

http://support.Microsoft.com/mats/slow_windows_performance

Method 2

If the problem persists I suggest you to try the different steps in the following Microsoft article and check if this may help. You can skip the steps that you have already tried.

Optimize Windows performance

http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

Running Microsoft Safety Scanner: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

Additional information:

For more information you can check the link below:

8.1 Windows, Windows 8 or Windows 7 hangs or freezes

http://support.Microsoft.com/kb/2681286

Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

Kind regards

Tags: Windows

Similar Questions

  • Lose the ability to access Internet after Windows updates published in the last 24 hours

    I lose the internet connection if I install the Windows updates published in the last 24 hours.  I have had access to the internet after restoring to a restore point.   I was able to recreate this problem be reinstall them again.

    Update the example is KB2121546

    Manually install a - alone.
    Reset.
     
    Still have Internet?
     
    Manually install the next one, one.
    Reset.
     
    Still have Internet?
     
    Repeat this until you lose Internet or have installed all updates - what comes first.  If you lose Internet - uninstall that one and install all others (using the same one at a time - at the most method you will have 8-9 for this cycle) then come here and let everyone know what update was kill your Internet connection.
     
    Why?  An update of the example is of no help.  There are 9 updates you could possibly have * if * you were aware through yesterday.  Knowing the SPECIFIC update that is causing your problem would be better for you and those who help you.

    --
    Martin Stanley
    MS - MVP
    --
    How to ask Questions the Smart way
    http://www.CatB.org/~ESR/FAQs/smart-questions.html
  • version of Windows 7 ultimate beta expires in 24 hours.

    My free trial version of windows 7 ultimate beta expires in 24 hours. Do I have to purchase the full version or buy an anytime upgrade.
    I received a message that says:
    To continue using widows backup files and then install any edition of windows 7 ultimate.

    I am running windows vista before my departure to the rc of windows version 7. What I have to reinstall windows vista or I can buy any version of windows 7 ultimate to run on my computer.

    Your question is answered in the post of TaurArian: "to avoid any interruption, please reinstall an earlier version of Windows or switch to Windows 7. In both cases, you will need to do a custom (clean) installation [emphasis] to replace the RC. "~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • XP shows Windows 7 time-stamped systems files an hour earlier.

    Reading files from other systems Windows 7 via the local network the same files displayed on the Explorer of Windows XP have stamped time one hour earlier than the time displayed on Windows 7 systems.  For example, a Windows 7 system file has 19/03/2010 08:34 while the same file on the XP system in question has 18/03/2010-07:34.

    I checked the XP system time settings and Windows 7 systems.  They all adjusted automatically DST.

    I wonder what could make the difference.

    continue to http://social.microsoft.com/Forums/en-AU/partnerwinclientxp/thread/d50e1008-8de1-4558-a504-65be899064b9

  • Upgrade Windows Vista to Windows 7 Home Premium and it has been slain on "Windows is finalize your settings" for 14 hours!

    I am trying to upgrade my computer Windows Vista Home Prem to Windows 7 Home Prem, how long should it take? I started the upgrade last night at 5:30 this morning, I entered the product key numbers. I then got an icon ' Windows is finalize your settings ' and it is still running14 hours later!

    original title: problem with the upgrade.

    Hi, Gom_148

    Disconnect external devices you have connected to the computer.

    Have you tried to shut down the computer, unplug, wait 10 minutes. Plug in there yet, run it, skip entered the product key and then see if she makes it to the office? If not, try unplugging all non-essential devices.

    If it does on the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link to change your product key

    Enter your product key and use the phone Activation to activate your license. Be sure to explain your situation to the Appeals Officer.
    -A.DaCosta-

  • Windows Vista freezes all the 1-2 hours

    It seems that I just discovered a few new problems... :(

    I tried to uninstall Skype (the only program that I had recently installed for the startup problems), but my PC gives me the error that Setup of Windows are not accessible... Which means that I can't seem to be able to uninstall it.

    Regarding the restoration of the system, I have done several restorations in recent days, but the problems persisted each time (in addition, I also discovered that I can not put of new restorations system manually).

    Yes, I ran a registry cleaner in the last days, just before the crash problem has worsened since 2 hours after the start in 5 minutes.

    Regarding the driver problem, I went to the site, that you talked about me, and although I discovered how to uninstall tunnel.sys, I found no information as to where I can find this yarn (?) and how to re - install later.

    Finally, in regards to Vista, the problem is that I have not received any disc of recovery or installation with my PC and the support of the store that I bought the PC offers no technical support, just to sell me the same version of Windows for about $100...

    It seems that I just discovered a few new problems... :(

    I tried to uninstall Skype (the only program that I had recently installed for the startup problems), but my PC gives me the error that Setup of Windows are not accessible... Which means that I can't seem to be able to uninstall it.

    Regarding the restoration of the system, I have done several restorations in recent days, but the problems persisted each time (in addition, I also discovered that I can not put of new restorations system manually).

    Yes, I ran a registry cleaner in the last days, just before the crash problem has worsened since 2 hours after the start in 5 minutes.

    Regarding the driver problem, I went to the site, that you talked about me, and although I discovered how to uninstall tunnel.sys, I found no information as to where I can find this yarn (?) and how to re - install later.

    Finally, in regards to Vista, the problem is that I have not received any disc of recovery or installation with my PC and the support of the store that I bought the PC offers no technical support, just to sell me the same version of Windows for about $100...

    If you have tried to uninstall in safe mode, it's normal that you can not! If it happens in normal mode then is another problem! So where have you tried to uninstall?

    If this has happened in normal mode is done so that you do not disable the service for her!

    on the pilot, there is nothing to download just right-click on it in the device manager then choose either update or right click Choose temptation and then on the driver tab click on roll back driver button if it is available! or alternatively unistall it... then restart normal then windows automatically install driver again.

    your pc has any recovery tool, to create recovery CDs yourself?

  • Windows Search - Advanced 'modified files above 1 hour ago'

    Hello

    I'm doing what I think should be relatively easy, but is very difficult...

    Documentation refers to things like this:

    Relative dates: today, tomorrow, yesterday

    However, I would really like to be able to reduce it to 1 or two hours...

    I found a few tools that seem to be similar, but I did not "want to do something fancy so I figure why do I need YET ANOTHER utility to install and manage... but maybe that I don't - agentransak, astrogrep, all (voidtools)) some seem to have a format such as" # "that would be ideal (and intuitive?), but I can't find any doco and can't make it work with any combo I tried" "" , so I guess it just cannot be done.

    Tools for working with search in windows 7/8 don't seem to be that big... 8 seems to be better, but its still very obscure, what I can/cannot do with search...

    I searched in the XML code in the saved searches, but I don't really understand how his work and can't seem to get a lot more twisting the weird values (for example: R00UUUUUUUUZZXD-1NU... where THIS is documented.)

    the best that I've got so far is to use "changed: today" and the order of descending dateModified... but when there is a lot of activity, so sometimes it's a little slow...

    Any ideas/suggestions?

    Oh, for anyone to play with this stuff:

    • nice feature that I have not found in any of the doco... If you create a search and save and then select search and then add more to the search in the search and then save, it "refines" research... (Search IN THE SEARCH), it is somewhat impressive... too bad there isn't a GUI interface with that... maybe a massively underrated v. powerful feature!
    • Doesn't seem to be anything I can find which will restrict things for me at a time (always full of hope), but I found the following useful - it looks like you can save the view of folders with the research, so I did this, order by datemodified, group records as well as by type of file, to help me filter things and small practices , via the above 'cool' feature-, it appears (in the XML file that the searches are "booleanable" (so you can say "this AND this AND this OR this") and I managed to do is RELATIVELY fast (in some situations).)
  • How can I stop Windows Live Messenger issuing alerts every minutes, hours and days of the year? I don't use it.

    I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

    I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

    I assume you have Windows Live Messenger, because you have installed the Windows Live Essentials.
    If so, a brief explanation...
    Windows Live Essentials includes some programs that can be installed or NOT, must be installed. You can choose whoever you want.

    Now, you have 2 options...

    1. you can disable. He will remain in the system but inactive.

    2. you can purely and simply uninstall it, and it will be out of the system.

    RE: Disable Messenger
    Open MSN Messenger > at the top, click on tools > click Options > column to the left, click on Sign In > straight column, uncheck all boxes > click OK done wnhen.

    RE: Uninstall Messenger

    Start button > in the search box, type programs and features > press the Enter key. Scroll down to Windows Live Essentials > right click it > click on uninstall...
    Follow the guests but be careful to screen > it will ask you what program to uninstall. Select Windows Live Messenger. Follow the prompts.

    You can check out this tutorial:
    http://www.dkszone.NET/uninstall-remove-Windows-Live-Messenger-How-to

  • Guide to Windows Media Center will not be updated, hourly almost empty

    Using WMC with antenna and Uverse Internet connection.  These days Guide in Windows Media Center has been warning me about the guide with less than 3 days on his calendar.  Now I see that the schedule tomorrow.  It asks if I want to update the guide, I say OK and it says it is complete, but the guide never gets updated.  After tomorrow, if the guide is not updated, this feature will be worthless.  How can it get updated since it controls recording? (Win 7 Home Premium SP1)

    On Wednesday, July 22, 2015 03:14:30 + 0000, SolarMaximum wrote:
     
    > Was never able to provide feedback via https://connect.microsoft.com/site1145.
     
     
    you need to login and create an account to see the Feedback tab on the
    left.
     
     
     
    __________________________________________________________________________________________________
    Barb
    MVP Windows experience
     
    Please mark as answer if that answers your question
     
     
     
  • Backup for windows vista, it counts 22 dvd - are up to 7 hours.

    My backup for Windows Vista Home Premium takes 7 more hours and is not yet complete.  I'm also up to 22 dvd - r.  Can someone tell me what I'm doing wronge?

    Hi Nancy-Cruz

     

    1. you perform a backup of the file as well as the system image backup?
    2. what type of backup you make?


    The backup may take time depending on the type of backup and the backup size. Please refer to the below help links -.

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

    http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files

     

    I hope this helps.

  • Windows updates... take hours to check

    I bought a used computer with Windows 7 and take hours to search for Windows updates... more than 6 hours, and it is always check the updates.

    I found that the last time updates have been verified for was there over 2 years (2014) and then by "updates have been installed", it gives the same date by said IMPOSSIBLE. Does this mean that updates cannot be installed on this computer?

    Windows 7 update problems? First read this.

    :)

  • My movie is 2 hours, but Windows shows 4 hours.

    My film is finished and it takes 2 hours. I want to download the movie on Youtube and I see that Windows shows that the film is 4 hours. I'm afraid people will see 4 hours and not watch. The film ends after 2 hours. How can I make a movie of 2 hours of it?

    Koolmees37

    Don't give up. There is something to this hour there 4 brand timeline, and we'll find it.

    How many pieces do you have in your project, 3 or more?

    1. make sure that the - + slider is set all the way to the right (max expansion).

    2. press the end key which should send the indicator timeline until the end of the fault of the chronology (this brand of 4 hours).

    3. with your mouse cursor, click on the top of the timeline so that the tip of the appearance of the cursor mouse as two horizontal lines with a vertical arrow

    Through this medium and then drag the mounting up as far as you can it should look like the following screenshot.

    In the screenshot above, I have not yet developed the Timeline with the - + cursor. And, where it is said "false end nothing showing" is a clip

    with a duration of 1 master (0.03 seconds) which is not visible. In this case, I worked with only 1 audio/video 1. So, I did not open the other

    titles to see what is there. You may need to open all of the tracks, if you have used more than 1 Audio Video 1 or you can't find something on

    Video/Audio 1 1.

    Now, I moved the - + slider all the way to the right (max chronology expansion) and then was able to see this 1 framework (0.03 seconds) clip that

    gave me the "False End show anything." See following screenshot.

    Once you right-click this clip giving the false ending and select delete in the menu drop-down, you can get your workspace to the 'normal' by

    going in the window Menu and selecting "restore workspace. If you don't find anything on Video 1 and Audio 1.

    Then, you must open each track (audio and video) and inspect the scope.

    Please let me know if this worked for you.

    Thank you.

    RTA

  • Fault that no associated application could not be found is the message that I get when I click on a link embedded in an e-mail message. All started to do this 24 hours.

    No previous difficulty following links via Firefox. When I click on the down-pointing triangle, a popup opens with content; However, when I click on 'Open with Firefox', the window closes. In the same 24 hour period, I tried to enter data in a form online with the same experience. By clicking on the link produces the above error message. By clicking on the triangle pointing open down the form, but the form closed when I tried to enter data in the fields. Thank you.

    It was very good work. Play well.
    Please mark your last post as solved so other will know.

  • Open a new tab in fact opens a new window

    I updated Firefox to 29 a few hours ago, and it causes a lot of problems. I've just restored to ffx 28, but it does not solve everything. One thing that's happened, it's that when I open a new tab at the top that looks like a second tab, but when you look down the toolbar, you see that there are actually two Windows Open ffx. If you hover over the icon ffx (I'm running Windows 7), two windows pop up. This happened six hours ago. He came with ffx 29, but do not go far with demotion to 28. It's really annoying. I'd rather have tabs grouped within windows. For the most part, I have a window open with all my tabs in it, but other times I want to have several tabs in each of the different windows several, because this organization works for me. How can I get rid of this?

    You can check the following parameter:

    the button Firefox orange (or the Tools menu) > Options > tabs

    Is the last box: "show glimpses of tab in the Windows task bar.

    I am sure that you must uncheck that and it should solve your problem.

    Success?

  • Why did Windows 7 freezing when using Firefox?

    S ' went for months now with many attempts to identify the cause. Came to the conclusion that it is Firefox but can't understand why.
    -If you use Firefox, my whole PC, not only Firefox freezes. Sometimes in the first 5 minutes of use of Firefox, other times it can happen an hour in a session. A hard reboot is the only way to get back to my Office I waited an hour before, after a freeze and nothing happens. The mouse pointer move, nothing.
    D ' first thought it was a hardware problem or a problem of antivirus protection.
    -Reinstalled windows on three different hard disks that all have the disk check. Still happens
    -Installed windows 8 to see if this could solve the problem. Nope, did the same thing on Windows 8.
    -Ran Memtest 86 + 14 hours overnight to see if it was my memory. No, zero found errors of memory
    -To be sure I even tried to use only a strip of ram in my PC at the same time to see if the chopsticks were bad. No, it froze with each stick
    -Tried to change my anti-virus. He froze with every single one, AVG Free, Avast free, Microsoft Security Essentials.
    -J' realized that my PC freezes only when I'm on the web in firefox. If I use chrome or Internet explorer, it doesn't happen. These total PC freezes happen when I use firefox.
    -My only adds on / plug that I use is Adblock more and more those who come with default Firefox.
    -My firefox is updated, I reset and reinstalled [everything by adding only Ad Block +] and again, this does not solve the problem
    -In the event log window, the only thing that happens every time my PC freezes is the error "Session"Microsoft Security customer OOBE"stopped because of the following error: 0xC000000D", why this would affect Firefox, I don't know.
    -I would like to understand the cause of this because I really want to use Firefox again.

    I finally understood that Firefox isn't the problem with this problem, but it's actually the Nvidia drivers. It's a shame as Nvidia pushes the hard driver updates. Drivers to eliminate this problem are 314.22. After you have uninstalled the latest drivers and replacing them with 314.22 I did have the problem at all in any program, including Firefox.

    Here's a thread from Nvidia on the issue.

    https://forums.GeForce.com/default/topic/596642/GeForce-drivers/please-help-event-ID-14-from-source-nvlddmkm-cannot-be-found/2/

    I had to replace a lot of my material before I figured out it was the Nvidia drivers because I don't have the correct error message on my old set up which pointed me in the direction of the video card.

    If someone has this problem I highly recommend demotion to 314.22 driver version if you have a Nvida GPU in your system.

    I'm very disappointed in Nvidia for not solving this problem after 15 + updated since 314.22 driver.

Maybe you are looking for