XP shows Windows 7 time-stamped systems files an hour earlier.

Similar Questions

• Why Windows 7 did install system files on my secondary internal hard drive, preventing it to be formatted or considered a Windows backup location?

  My computer has a Seagate hard drive 500 GB internal SATA that has the operating system on it and also a secondary internal Seagate IDE HDD 80 GB that I was drag files on a backup. I tried to format this drive of 80 GB to get a fresh start and use Windows backup to back up my files. Windows 7 will not format the drive, and he does not see the drive as a location of backup because apparently the clean installation of the Windows operating system, updated system files on the secondary drive. Disk management reports the operating system drive (500 GB one) as "disk 1-Boot, Page File, crash dump, primary Partition. It reports the secondary drive (the 80 GB one I would use with Windows Backup) as "disk 0-system, active, primary Partition". I would very probably disconnect the secondary drive and do other clean install of Windows 7, so he places all the files on the hard drive and do not involve the secondary drive, so I can format the secondary drive and use backup Windows? Or y at - it another way to fix this without doing a clean install? Thanks for any help!

  To create a new, full backup

  After you create your first backup, Windows backup will add new information or changed to your subsequent backups. If you save your backups on a hard drive or network, Windows backup will create a new backup, full for you automatically if necessary. If you save your backups on CDs or DVDs and could not find an existing backup disk, or if you want to create a new backup of all the files on your computer, you can create a full backup. Here's how to create a full backup:

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. In the left pane, click on create new, full backup.

     

     Note

     You will see this option if your backup is saved on CD or DVD.

  http://Windows.Microsoft.com/is-is/Windows7/back-up-your-files

• theme Windows vista missing, no system files.

  I have Windows Vista Home Premium. My windows vista theme disappeared and reset my computer to the windows Classic view. I looked at all issues similar and no worked solutions. I can't click Restore system, command prompt, & also, my windows will not update. I get error 0x800700e6 (channel status is incorrect) whenever I try to click on one of the programs, I download anything to the internet, the same code every time. So I cannot use the system restore, cannot use command prompt and can not update anything from windows update in Control Panel. I also do not have a cd of windows vista as it was installed on the computer when it is purchased. I tried high grade on Windows Aero, and it also came with the same 0x800700e6 error code. Also now when I press the Start button, click Control Panel configuration or the computer, it does not move up, and if he does, his does not...

  Hi love,

  You did changes to the computer?

  When it's this last work good?

  You have security software installed on the computer?

  Do you see the theme on the personalization page?

  Follow the steps mentioned below:

  Method 1:

  You start the computer in safe mode and check if you face the same problem, follow the steps from the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed, no internet connection available in safe mode.

  Method 2:

  Visual effects Aero Glass in Windows do not work or display http://support.microsoft.com/mats/aero_effects_not_working/

  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Method: 3

  If you encounter the same problem in normal mode perform the scan online safe mode with network according to the link below:

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Once your in safe mode with network perform a scan online as mentioned below:

  Microsoft Security Essentials

  http://OneCare.live.com/site/en-us/default.htm

  Note: perform a full service analysis

  Reply back with the results

• Windows Server 2008: Corrupted system files

  On a Windows Server 2008 R2:

  SFC/scannow fails to 58% with "corrupt files unable to fix some".

  Subsequent DISM / Online/Cleanup-Image /RestoreHealth

  Error 3:

  C:\Windows doesn't seem to be a valid directory.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 7 network icon systems do not show popup connections

  Normally, when you simply right click on the Windows 7 network icon in the system tray, it opens a window showing your connections and available all other connections. Now however, after using the laptop for several hours, and after that unlocks a few Office and a resumption of the mode standby, this no longer works. I click and nothing happens. The only way I can access this is right-click on the icon, open the network and sharing Center then click on "connect or disconnect." It is a pain I need to connect/disconnect continuously different VPN.

  If I re-boot it starts working again. I can't find the exact scenario to make, work stoppage, but it happens regularly.

  Hope there is a fix for this.

  James

  Hello

  Try these but I recommend that you ask in the TechNet forums also as perhaps more
  He has seen this happen. Usually, this is the icon itself disappearing, not functionality
  you encounter.

  Try the methods below and if no success asking on TechNet.

  Windows 7 IT Pro Forums
  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  -----------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ====================================================

  After that the foregoing: (here, the NETWORK card and Wifi are interchangeable in the sense that the two must be
  fact that you can do if you first use).

  Follow these steps:

  Control Panel - network - write down of the brand and the model of the Wifi - double click - top
  tab of the driver - write version - click on update driver (can't do anything like MS
  is far behind the pilots of certification). Then right click on the Wifi/NIC device and UNINSTALL
  -Reboot - it will refresh the driver stack.

  If necessary to download drivers on another machine and transfer on the problem computer via
  removable media such as a USB key or CD - DVD.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  ======================================

  If necessary:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  Other possibilities include something running is interfering - programs suspects antivirus/security
  Among others.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• A few bookmarks do not show so I asked to restore (in the menu bookmark)-now all disappeared. What files are stored bookmarks in (in the system) so I can use time machine to restore from an earlier date?

  I do a lot of work on the web and I have a ton of bookmarks that I use to maintain sites. I lost all!

  I tried to install a new copy of the program and restore the file Mozilla from the library to the user (in time machine), but all I have is a white space where was the bookmarks bar! I also have a problem trying to re-enter manually all bookmarks. I can open the bookmark drop down, but I can't save all bookmarks. Firefox don't mark all new pages. I still all the passwords in the preferences if I don't want to install a new copy of the program and lose these.

  Are there other system files that Firefox uses that I can restore the backup to solve the problem?
  I have a Mac Pro and I am OSX 10.6.4
  I have used Firefox for years and never had a problem before.
  Can anyone help - please?

  This may be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• Windows system file checker (sfc.exe) for vista

  for some time I have been questions in Microsoft questions and things answers.mainly does not properly in my computer.now that I just learned that I have a System File Checker tool in my computer that finds all windows corrupt the file in my computer and fix it.and if I have windows files missing they will replace it... I didn't know I had.it States if your computer is slowing down or crashing, no matter what material is slow or does not work it is most likely that you have a lack of windows file or a file that is corrupted .you can find your rejection to start your computer.now wouldn't great if it could come in automatic mode say every month check on your computer, repair files lost or corrupted, if your computer runs like new. I an engineer coming around today to tell me any it.because as I said I'm on over the years and a lot about computers, I don't have really know.like much people.if it is a tool to help us with our computers, we should use it.please Microsoft allows to get this working so its on our computers automatic to keep running as new.also whole body outside their who can help me with more info about system file sfc.exe.would auditor all be aid.

  Bob

  http://support.Microsoft.com/kb/929833

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  System File Checker is not a universal solution, but it can help in certain situations.

  You really ned to determine the nature of the error before deciding on solutions.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Hide the Desktop.ini from the 'view' position, while leaving the ticked the checkbox show all system files?

  This worked fine with XP, but doesn't seem to work in Vista or W7.  I need the abililty to see all systems files and folders when you use the Explorer; However, I don't want to see the files on my desktop system.  After the 'bureau' is a special "display".  Is she can combine and display information from several sources (for example. C:\Users\Public\Desktop as well as my profile).  In addition, the desktop contains icons that are not in the profile of a user (for example. Network, computer, etc.), but they also present.  My point is that Microsoft has made a point to differentiate the Office Explorer view but incoherent.  As said above this worked fine with XP (and Windows 2000), but deserted in Vista and W7.  Y at - it another way to display all the files and folders system without displaying on the desktop?
  Concerning

  You have a bug because desktop.ini is not displayed, even if you check Show hidden files.

  On computer and network - icons you can hide using a customization: right-click on the desktop > personalize > change desktop icons > uncheck these icons

  ...

  I was wrong, showing desktop.ini is not a bug... You just bought too many options of folder and Search Options. I wonder how many times you need to see the protected file system? Because you unchecked to hide the protected operating system files . Another option: driver, Show hidden files and folder will show you everything you need. If you are not convinced, just go in a place where you expect that Hide protected system files will hide something important to you and to see these files will really disappear after choosing that Hide protected operating system files.

• Windows 10 shows a bad time in boot camp

  Windows 10 shows the wrong time. It is a big problem because it my ability to connect to some programs that I regularly use the effects. Even if I went into the Windows settings and set the Windows system clock to EASTERN time is 7 to 8 hours off the coast. I tried parameter, the parameters of time automatically detect and then turn off automatically detect with no joy.

  I heard that this happens because Apple uses GMT and Windows uses another method. I really need this to work.

  Someone at - he found a solution for this?

  OS X shows the exact time? If this is the case, change your source Windows time to be identical to the source of Apple, which is usually time.apple.com site or the use of the public NTP servers for the two operating systems.

  If you connect to a Windows domain/AD server, make sure that you have a good VPN or local connection to such a server.

  

  

• file lvm recorded with time stamp graphic display

  Hello

  I have headaches display my data with correct timestamp. There are so many methods to save the data. Here, I decided to save it in a text delimited as lvm. a screenshot of my vi segment is attached. I want to use this way rather than other methods is the flexibility it offers. I'll be able to add more data to store that I develop the vi. (So I'm storing data of the DAQ assistant and my calculated values.) I've attached a screenshot of the file I also read.

  I would use another vi to open this file and it draw a chart/graph to show a trend of the acquired data. Can someone pls Advisor mid on which is a better way for mi to do?

  Thank you very much!

  POH

  Hi Malou,

  Sorry for the late reply, I was rushing to complete my project, has not been able to answer.

  Yes, I managed to solve it. In any case, I've used this high rate in the acquisition of data wizard is to allow the acquisition of continuous mode & use a software filter instead of filter material. However writes to the folder this way - write string in .lvm, max is 10 samples/s unless I have use tdm (I'll then everything in the newspaper).

  I was not able to display the correct timestamp was due to the fact that I have does not add to the timestamp of the start time for the timestamp in waveform display. I won't be able to go down to my lab, & my machine have no LabVIEW, so what I do is to extract some parts of my report to share.

  For the part that I used to display the graph (can be seen on the attachment), I deleted the 1st column, which is the time stamp (for display of the spreadsheet), but extract the 1st element - convert timestamp DBL it when I start recording in the DAQ vi (written with the header).

  This excerpt (which could be considered as a group of numbers in the file lvm) and converted to the type timestamp and wired for generating waveform block, providing the start time of the wave.

  Then I replace the use of the chart with graphic, graphic is suitable for data acquired and graphic tracing is better for the time of execution of the data display. now it seems to work fine for me, except for the load time may take some time for larger files.

  Thank you for your participation in this thread!

  See you soon!

  POH

• Time stamp indicator system?

  I try to use the theme of the 'system' for my front panel, and my orders and simple digital indicators converted (from 'modern'). However, I noticed that there is no indicator of stamp simple 'time' apparent on the system > digital (or elsewhere).

  Is it one that I can't find? Or do I have to hard code it so that it displays using the theme of the system?

  Thank you

  The more trivial would be to simply use a double floating point control and set its absolute timestamp format. Then convert the type timestamp in DBL with the conversion function according to.

  If you really want to go the way of a genuine system of type control, you will need to go into the control editor, which is a bit tedious editor that shows its age of beginnings of LabVIEW and William. It you start with a classic time stamp check and replace the cosmetics with a string of system or a similar control. It takes a little time to get to know the editor control and work around his troubled behavior sometimes.

• Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

  Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.

  Hello

  Follow these steps and check if that helps:

  (a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.

  (b) click on the arrow next to public folder sharing, and then click one of the following options:

  i. turn on sharing so anyone with network access can open files

  II. turn on sharing so anyone with network access can open, change and create files

  III. turn off sharing (people logged on to this computer can still access this folder)

  (c) click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  You can also read this article and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

• Trying to backup computer, get the error message "the C: drive has errors" "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. »

  I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :).  Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. "  and then nothing happened.  What should I do?  How can I save my files?

  I planned it, rebooted, and nothing happened.  I have tried three times now

  Hey Ruffscicle

  read the information on how to run the check disk at the link below vista64.com

  If the first method does not work, try the other methods

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  have a Happy New Year

  Walter, the time zone traveller

• Windows 7 continues to write thousands of jpg files on c:\windows\serviceprofiles\networkservice\appdata\local\microsoft\media player\art cache\localmls subdirectory in the form of system files.

  Let me describe what is happening. I used the 'get info' in iTunes to add various jpg work at the individual level of CD (i.e. selecting song at the same time) multiple.  ITunes displays the work very well and works very well. Over a period of time, I noticed deterioration in system performance and when I tried to create a disc using CMS Bounceback Ultimate image has noticed that the number of files on my hard drive had increased from 250,000 to about 1 000 000. After much research and a bit of luck, I determined that Windows 7 has written these JPGs repeatedly in the subdirectory cache\localmls of c:\windows\serviceprofiles\networkservice\appdata\local\microsoft\media player\art. These are the same files jpg, I added in iTunes. When I discovered, there are about 700,000 of these small files in this subdirectory in the form of system files which are hidden files. I was able to remove these files first reset file attributes (attrib s h - r *.jpg) and using the del command. Unfortunately, the system continues to write the same files in the same sub and a few hours, I have thousands of these files written again. I checked the system for virus/malware using the latest versions of sophos, malwarebytes, and spy hunter. There is no malware reported by one of these programs.  I also stopped Sophos and tried again but the problem persists. I have also rebuilt iTunes library by following the steps described by Apple, but this does not solve the problem. Any suggestions I can try next?

  "Turn off"Windows Media Player Network Sharing Service"seemed, if stop it... for now =)"

  Lack of disk space (windows 7)
  http://forums.techguy.org/Windows-7/920441-missing-hard-drive-space-Windows.html

  Microsoft.public.Multimedia.Windows.MediaPlayer
  http://groups.Google.com/group/Microsoft.public.multimedia.Windows.MediaPlayer/browse_thread/thread/b4593bd2d12cec0f?TVC=2

  http://www.Google.com.au/search?q=c%3A%5Cwindows%5Cserviceprofiles%5Cnetworkservice%5Cappdata%5Clocal%5Cmicrosoft%5Cmedia+player%5Cart+cache%5Clocalmls&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = Bt99TMivOM2PcffGtcgJ

  If not, perhaps, you create a batch file to run at startup or schedule tasks to remove *.jpg files that appear in this folder?

  An approximate example of a batch file would be in this sense. It would be created in Notepad but recorded in a .bat file.

  C:
  CD "windows\serviceprofiles\networkservice\appdata\local\microsoft\media player\art cache\localmls".
  DEL *.jpg

  pause

  This is only a rough guide and may need a lot of amendments by you that I'm not familiar with batch files, but it shouldn't be too hard to do.  The batch by operating manually or in scheduled tasks file would need administrative privileges or the localmls access permissions set properly for the user.

• Windows system files cannot be deleted.

  Hi, I have just re installed Windows 7 Professional on my Compaq Presario C700 and what happened was, when it restarted, I forgot to remove the USB and it installed more than 4 times the disk with. I thought that he wasn't supposed to do that, so I took the USB key before the next re start.

  Now, I installed with 5 Windows folders: Windows old, old.001 - old.004
  I searched the Internet and I took possession of the files, but still they can not be deleted because I need the consent of some installer or something, I tried a software called Unlocker but still - no progress, they take more than 70 GB on the disk. The only options that appears when I try to delete the file are: retry and cancel.
  Please tell me a solution, it is losing too much disk space.

  Hey Murtaza Nadeem

  
  
  Follow the steps below to remove the windows.old folder:
  1.) open by clicking on the button start disk cleanup. In the search box, type and then disk cleanup in the list of results, click Disk Cleanup.

  If you are prompted to choose a drive, click the drive that you have just installed Windows on and then click OK.

  2.) dialog box in disk cleanup, on the Disk Cleanup tab, click on clean up system files.

  If you are again prompted to choose a drive, click the drive that you have just installed Windows on and then click OK.

  3.) select the Previous Windows installations check box and the other check boxes for files that you want to remove, and then click OK.

  4.) in the message that appears, click on delete files.
  BryanNeil