Windows 7 mass storage peripheral communication problem

Similar Questions

• USB mass storage device driver problem

  I have 64 bit computer purchased new in July 2012, running Windows 7 with a Lexmark Interpret S405 printer.  It has been installed and works well for months and today, I asked a print a page on a Web site, and it would not print.  I received an error message indicating that the printer cannot communicate with the computer.  I tried to delete the request for printing, but the computer did not respond.  So I rebooted it.  After it restarted, I went to devices and printers to check the printer, and there the image representing that she needed troubleshooting.  Tried, but it did not fix the problem.  Then I received another message: USB Mass Storage Device has a driver problem.  Tried to find and install the updates for it, but the info said that the driver was already installed.  Can you help me solve this problem?  I'm not a computer scientist, just a frustrated computer user.  Thank you!

  I asked a question yesterday about an error message that says: USB Mass Storage Device has a driver problem.  This morning I tried unplugging the power to the printer and then plugged back in.... problem solved.  No need for additional assistance at this time.  Thanks anyway!

• Satellite M70: Could not find a mass storage driver

  Hey there,

  I installed a new satellite m70. But I can't seem to find a driver for mass storage. The problem is I don't know which driver it is but my machine keeps bugging me. If anyone happens to know what device need to install please, help me.

  Thanks in advance!

  zichzach

  Hello

  Why don t you use the recovery CD?
  It all the drivers, tools, and utilities are preinstalled and you only need to start the recovery procedure. It takes 20 minutes, and then the unit works very well.

  Good bye

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• PlayBook of Smartphones blackBerry Desktop Software does not recognize. not recognized as peripheral mass storage

  Work Machine - Windows XP question: I installed, removed, close and re-installed the latest version of the Software Desktop 6.0.2 B45, but failed to get the Office to recognize my Playbook.  As the system does not recognize the computer as a mass storage device either

  Home Machine Windows XP problem: I did as above and now not only the softare does not recognize the Playbook but it charges 6.0.2 B45 whenever it is connected.  The computer recognizes the Playbook as a mass Storage device, but 570 MB 100% full (it is a machine of 64 G)

  Ideas for one or both?

  Sorry, I was in the wrong community section

• Re: NB550D - 'No mass storage devices' during the installation of Windows

  Hello!

  I recently bought a laptop Toshiba NB550D. It goes with Windows 7 Starter. So I decided to change the operating system, I want XP Pro or Windows 7 Edition Home Premium. Because the laptop is not a CD/DVD drive, I looked on the net for Windows USB installation.

  Problem is that when I install the USB, with regard to the partitions, it says I have no mass storage devices. I tried with XP and Home Premium, used 2 different programs to make bootable USB (WinSetupFromUSB and WinToFlash) and I tried with 3 different USBs to be sure that the problem is not of them. Both seem to do the job, but it still says I have no mass storage devices. I read on this forum, found [how to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] thread. I tried this, make an ISO with the built-in driver, made an another bootable USB key with it, but still, when I reached the partitions, they seem to be missing.

  I checked if the partitions will show if I start installing Windows directly from the Explorer to the laptop and partitions are then normally, so it seems that the problem only occurs when you try to install from a USB. But I want a * install own bootable *. I have no CD/DVD lens, so this isn't an option more.

  I'm really out of options on the left, tried everything I thought, it seems that I'm not the only one having this problem, but found no solution to it. Even if I put up with the Starter (even if I don't like), the HARD disk is separated into 2 partitions the two 116GB which is also very annoying.

  I'd appreciate any help! Thanks in advance!

  P.S. I also installed the latest drivers, BIOS seems to be too, but still did not help.

  Hey,.

  Which AHCI driver, I joined?

  Article you found how is just an example and is written for models with Intel chipset. I checked the NB550D specifications and this model has chipset AMD A50M, so you need another driver and the Intel driver will not work.

  So if you are looking for Toshiba NB550D European driver download page, you will see a driver called AHCI driver. This package contains the correct AHCI driver, but the problem is e for Windows 7 only. For obsolete XP it will not designed more pilots and that AMD is brand new. There is no old drivers.

  If you want to only Windows 7 Home Premium that s no problem. Therefore, you can use the mentioned AHCI driver. For example, to create a new Windows 7 bootable USB key with this driver and installation should work fine. :)

• problem when installing win7 lack of mass storage driver

  Dear Sir

  I have a problem during the installation of win 7 in HP PAVILION DV6700

  This laptop has been using vista so I want to change to win 7

  his wonder MASS STORAGE driver

  so I need this driver to install windows7

  Thank you

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string like this PCI\VEN_1217 & DEV_7130 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• Satellite P200-1JY - Windows mass storage controller driver 7

  Hello
  I own a P200-1JY PSPB6E, and I installed Windows 7. One device no driver found, is the "mass storage controller" and I havn't found this driver...
  Am I the only one having this problem?
  Kind regards.

  Hello

  You are not alone.
  I aso had this on a P500 when you perform a clean install of Win7.

  Go to the Toshiba website for your area and download the Toshiba Win7 drivers for the driver problem, you... P200 I found here - http://support.toshiba-tie.co.jp/windows7/download/Satellite_P200_32_au.htm

  There is a storage config atch here as well I think solved my problem in a few weeks ago...

  Windows7

  Pilot

  PatchFiles (TOSHIBA Storage Configuration Patch for Windows7)

  BR /.
  Rob

• Satellite L670-153: problem with a SONY 4 GB mass storage

  I have a portable satellite L670-153 with Windows 7 64 bit. When I conect a 4 GB SONY USB mass storage, Windows install the USB mass storage. But after a few minutes, the USB mass storage is disassemble and assemble and disassemble some indefinitely.
  I update the bios and the driver from the chipset, but I still have the problem.

  And what now?
  You can test the functionality with the other 4 GB USB key? Just to see if other brands will be recognized correctly. The problem when used on another PC with the same operating system?

  I have 2 SanDisk and 1 stick USB Toshiba and each of them are recognized properly on different laptops?

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• Peripheral mass storage USB is recognized as DVD player while the original disc is missing

  Hello

  I use windows vista Home premium (32 bit) on my HP pavilllion laptop. After getting updated for service pack 2 for vista my dvd player was absent. I was using Microsoft fixit to solve the problem and the use of the internet by wireless USB reliance data card and my laptop has recognized this usb mass storage device, dvd player and I have uninstalled this usb device several times as I tried to restore to their original factory condition, but my problem has not been resolved. Help, please

  Hi ss_gour,

  Please see an additional post that resembles your problem with a possible fix:

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/d416cfcd-366B-4B50-B976-29b5edc169c1/

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• two problems RY5U870-ImageSensor06 not recognized as mass storage controller is not found

  I'm a technical novice so what a mass-storage controller is I need one that is recognized by windows vista 32-bit also RY5u870_Image Sensor06 is not compatible so can you tell me how to solve these problems, hopefully with the downloads. One or two of these problems prevent me to activate windows.

  Hello

  1. are you enter the product key during the installation of Windows Vista, or just try to activate?

  2. don't you make changes to your computer?

  3. What is the exact error message you get?

  4. who is your production of computer?

  That the compatibility of the product status is unclear, I suggest you contact the manufacturer for assistance on this issue.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=hardware&p=RY5U870%20ImageSensor&v=Lanier&UID=&pf=0&PI=0&s=RY5u870_Image%20Sensor06&OS=32-bit

  I suggest you install the controller of the website of the manufacturer of the computer mass storage and check

  Method 01:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 02:

  RY5u870_Image Sensor06 is not compatible, I suggest you to install XP drivers in Windows XP compatibility mode

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• peripheral mass storage USB "unplug safely device" will not be released

  I plugged my camera memory chip and it does not load so I check the Device Manager and says USB Mass Storage Device "probably delete material" and I had not removed the chip... I had already deleted... that it will not come out... I tried to reboot so far with no results and tried to put the chip in and out to try to put in place the "surely remove device" to come and he did once but that didn't help... I will try to shut down the system and see if it works... has someone else had the same problem?

  Hi Jamievee,

  1. don't you make changes to the computer before the show?

  Follow the steps in the link given below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the steps above did not help, then you can try to format the chip on another computer and then check if the chip is detected.

  See the link provided below in order to format the drive.

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Formatting erases all existing files on a hard drive. If you format a hard drive with files it contains, the files will be deleted.

• Mass storage controller has no driver, windows update can't find a driver.

  After doing a full installation of Windows 7 Professional 64 - bit on a laptop previously with Windows XP MCE 2005 there is a problem with a piece of hardware. In Device Manager, the details are the following:

  Mass storage controller

  Device type: other devices
  Manufacturer: unknown
  Location: Bus PCI 6, device 7, function 2

  Device status:
  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  I tried the windows update and it cannot find a driver.

  I am pleased to provide you with any additional information needed, and I appreciate any help offered.

  Driver Vista for Clevo M570U :

  FTP://FTP.Clevo.com.tw/M57xU/others/CardReader_V.zip

  When there's some sort of problems with installing and then try to run in Vista compatibility mode.

  Resources:

  How to run a program in Compatibility Mode in Windows 7

  Make older programs in this version of Windows

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Windows 7 is installed, now missing "Mass storage controller" driver (Code 28)

  I installed Windows 7 (32 bit) and Bishop of device under the heading "Other devices" Windows could not find the device driver for the "mass storage controller".  My motherboard is an Asus P5AD2 - E Premium.

  Device type: other devices
  Manufacturer: unknown

  Location: Bus PCI 1, device 4, function 0

  After reading another similar thread, I clicked on properties, details and under Hardware lds, here are the values:

  PCI\VEN_1283 & DEV_8212 & SUBSYS_813A1043 & REV_13
  PCI\VEN_1283 & DEV_8212 & SUBSYS_813A1043
  PCI\VEN_1283 & DEV_8212 & CC_018000
  PCI\VEN_1283 & DEV_8212 & CC_0180

  Hope this info is helpful and now someone can help me solve this problem.

  Thank you

  Hi emender,

  It seems that there is no chipset driver for this motherboard for use with Windows 7.

  If you aren't able to find a working driver for the manufacturer, you may not be able to run this version of Windows on this material.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.