Windows 7: memory.dmp files disappear

Similar Questions

• Error Windows with Memory.dmp after registry cleaner

  Hello

  Often, I run my registry (Eusing) cleaner to help my computer work better. But recently, he finds more errors than usual and after cleaning the registry, I lost the use of my touchpad (because I use a laptop), my computer ran more slowly (even if she becomes faster), and restart, shut down or even shut down my laptop, it will always do, then come (when it comes) telling me an error that forced the phone to restart. The error concerns the files

  C:\windows\minidump\061114-26972-01.dmp

  C:\Users\*username*\appdata\local\temp\wer-76471-0.SysData.XML

  C:\windows\memory.dmp

  After restarting my computer in safe mode, the errors have not persisted, but restarting leads to a DPC_WATCHDOG_VIOLATION.

  Please let me know which files you need to see, and how I can download them.

  Wednesday, June 11, 2014 18:41:22 + 0000, Shnerdling wrote:

  Hello

  Often, I run my registry (Eusing) cleaner to help my computer work better. But recently, he finds more errors than usual and after cleaning the registry, I lost the use of my touchpad (because I use a laptop), my computer ran more slowly (even if she becomes faster), and restart, shut down or even shut down my laptop, it will always do, then come (when it comes) telling me an error that forced the phone to restart. The error concerns the files

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read
  http://www.howtogeek.com/171633/why-using-a-registry-cleaner-wont-speed-up-your-PC-or-fix-crashes/
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  You can also read the section on the registry of CCleaner
  Here cleaning product:
  http://www.howtogeek.com/113382/how-to-use-CCleaner-like-a-Pro-9-tips-tricks/

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 DMP files included BSOD Please Help!

  For last 1-2 weeks have BSOD on my pc. I reinstalled Windows 7 Home Premium several times. A few days after each re - install Win 7 I start receving BSOD. I formatted my disk, partitions, etc. I just need to solve these BSOD. I've included below DMP and Dump WhoCrashed logs files. In these papers he suggests that my drivers could be the cause of crashes of theses. Let me know what is wrong in the comments below.

  Thank you

  Mike Read

  DMP files:
  https://onedrive.live.com/redir?RESID=40F0655702713F9A%21176

  Data sheet:
  Motherboard:
  -All Series, ASUS, ASUSTeK COMPUTER Inc., Z87.-k.
  CPU:
  -GenuineIntel Intel (r) Core i5 - 4670 K CPU @ 3.40 GHz Intel586
  Graphics card:
  -GeForce GTX 660 ti
  RAM:
  -8 GB company unknown.<-------Ran memtest="" 86="" on="" this="" ram,="" no="">
  Hardrives:
  -C = disk 128 GB SanDisk SSD drive
  -Drive(Gaming/storage) E = TOSHIBA 2 to 7200 RPM 64 MB cache

  WhoCrashed reports:

  Saturday, may 10, 2014 3:55:02 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5023-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (0xFFFFF6FCC8078408, 0xFFFFF80002CE089A, 0x2, 0x0)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:36:38 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-10405-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0 x 4211)
  Verification of error code: 0 x 24 (0xFFFFF8800B088068, 0xFFFFF8800B0878C0, 0x1904FB, 0xFFFFF80002DBEB05)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, may 10, 2014 3:33:49 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-28782-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 34 (0x55F, 0xFFFFFFFFC0000420, 0 x 0 0 x 0)
  Error: CACHE_MANAGER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a problem has occurred in the file system cache manager.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 3:29:40 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5912-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA800339B0A0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:49:28 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-54974-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA80033A5C30, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:40:44 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-8829-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003335C10, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:37:22 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-5506-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002ABDAC5, 0xFFFFF88009801810, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, may 10, 2014 2:32:51 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\050914-7753-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFFA8003389BE0, 41790, 0 x 0 x 0, 0xFFFF)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Hello

  We have three controls compatible bug:

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {41790, fffffa800339b0a0, ffff, 0}

  - Parameter 1 of the bug check is 41790 indicating a page table was corrupted.
  

  3: kd > dt nt! _MMPFN fffffa800339b0a0
  + 0 x 000 u1:
  + 0 x 008-u2:
  + 0 x 010 PteAddress: 0xfffff6fb'40000050 _MMPTE
  + 0 x 010 VolatilePteAddress: 0xfffff6fb'40000050 empty
  + lock 0 x 010: 0n1073741904
  + 0 x 010 PteLong: 0xfffff6fb'40000050
  + 0 x 018 u3:
     + 0x01c UsedPageTableEntries: 0xffff
  + 0x01e VaType: 0 ''
  + 0x01f ViewCount: 0 "
  + 0 x 020 OriginalPte: _MMPTE
  + 0 x 020 AweReferenceCount: 0n128
  + 0 x 028 u4:

  UPTE has fallen below zero, which implies usually a driver caused the corruption (or faulty RAM memory).

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Bugcheck 3B, {c0000005, fffff80002abdac5, fffff88009801810, 0}

  3: kd > fffff80002abdac5 ln
  (fffff800'02abdac5)   nt! ExpInterlockedPopEntrySListFault16 |  (fffff800'02abdad0) nt! ExpInterlockedPopEntrySListEnd16

  The exception is produced in nt! ExpInterlockedPopEntrySListFault16.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  ---------------------

  Run Memtest for NO LESS than ~ 8 going on (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Clear the MEMORY. DMP file?

  I have Windows 7 Ultimate 64-bit. Can I remove the huge C:\Windows\MEMORY. DMP file? It has been amended 30/12/2010, so I doubt that the information it contains is necessary.

  Yes, you can remove it.

• downloaded files disappear once downloaded from the download window. How to stop this means?

  version 3.6. When I download a file that the download window appears and the file is downloaded. The second, he finished the download of the file he disappears. Then I have to go to download the file in Explorer to victory to treat the file - a pain ~! How can I stop the file disappear, please?

  Check if the solutions proposed in this article helps solve your problem: the downloads window is empty.

• Need help with a DMP file. Windows XP

  Hello guys!

  Need your help impeccable with a dmp file? What is the problem causing blue screen?
   http://data.fuskbugg.se/skalman02/4e04ed908a06f_Mini122210-01.dmp (latest version)
   http://data.fuskbugg.se/skalman02/4e04edab036c8_Mini113010-01.dmp
   http://data.fuskbugg.se/skalman02/4e04edbce5212_Mini112710-01.dmp
  Thank you for the kind help!

  Hello Molphyr,

  The first discharge seems to have been caused by viahduaa.sys and it should be updated.  My comments on the discharge are in bold:

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  100000 1 error checking, {a824a000, 2, 0, acc5e0d8}

  Probably caused by: viahduaa.sys (viahduaa + 280d 8)<-- debugger="" suspects="" this="">

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: a824a000, memory referenced
  Arg2: 00000002, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: acc5e0d8, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: a824a000

  CURRENT_IRQL: 2

  FAULTING_IP:
  viahduaa + 280d 8
  acc5e0d8 3b0f cmp ecx, dword ptr [edi]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  BUGCHECK_STR: 0XD1

  LAST_CONTROL_TRANSFER: from acc6134c to acc5e0d8

  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  acc6134c 80551384 a8249fe0 00000020 a8249fe0 viahduaa + 0x280d8<---driver is="" at="" top="" of="">
  805513a 8 acd8d676 847bcd58 a8249fe0 a9abcc80 viahduaa + 0x2b34c
  805513d 0 80551401 00000020 80551400 portcls acd8d945! CPortPinWaveCyclic::Copy + 0 x 56
  80551410 acd877bf 00024fa0 8055c0c0 ffdff000 portcls! CPortPinWaveCyclic::RequestService + 0 x 298
  80551428 80545ebf 847 4238 4228 portcls 00000000 847c c! CServiceGroup::ServiceDpc + 0x2a
  8055be60 80551440 ffdffc50 00000000 8055be60 nt! KiRetireDpcList + 0x61
  80545da4 80551450 0000000e 00000000 00000000 nt! KiIdleThread0
  80551454 00000000 0000000e 00000000 00000000 nt! KiIdleLoop + 0 x 28

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  viahduaa + 280d 8
  acc5e0d8 3b0f cmp ecx, dword ptr [edi]

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: viahduaa + 280d 8

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: viahduaa

  Nom_image: viahduaa.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a24e854

  FAILURE_BUCKET_ID: 0xD1_viahduaa + 280d 8

  BUCKET_ID: 0xD1_viahduaa + 280d 8

  Follow-up: MachineOwner
  ---------

  0: kd > lmvm viahduaa
  start end module name
  acc36000 acd85900 viahduaa T (no symbol)
  Loaded symbol image file: viahduaa.sys
  Image path: viahduaa.sys
  Image name: viahduaa.sys
  Timestamp: Kills Jun 02 03:52:36 2009 (4A24E854)<--- driver="" from="" 2009-="" should="" be="">
  CheckSum: 00156D7B
  ImageSize: 0014F900
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• When I create a new folder in Windows Explorer, I hit F5 to refresh the screen, the file disappears.

  When I create a new folder in Windows Explorer, I hit F5 to refresh the screen, the file disappears. If I try to create the same again, I get a message that I already have a folder with that name. It is nowhere on my computer.  I've searched for it & he's not here.

  R.Click on the desktop, properties, desktop, customize, web, search & check

  "lock desktop items" closes when thru.

• Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications.

  When I start my laptop I get "your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications. "and my laptop takes forever or does not open my programs. any help? Thank you.

  less than low disk space,

  What seems to be the case, it's that your windows is having a hard time resize its file for virtual memory.

  my suggestion is to remove "auto" at that time, and then set a custom format.

  I recommend that you set the initial size of 2 and max at 1152.

  Here's how to put a link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• I have windows vista and my scan reads memory corrupted files and nothing seems to work

  I have windows vista and my bed scan memory files are damaged. Last week your beople helped me with a problem of viruseshad infected also a Trojan horse which has blown on my windows essentials, I had at the time I had to move to AVASTfirewall and defender but he still reads memory corrupted files what I wear what we can do.  * E-mail address is removed from the privacy *

  Hi Larry-664,

  ·         You try to retrieve files or is it just an error of analysis?

  ·         What is the full error message?

  ·         When you see this error message?

  ·         What analysis do you use?

  ·         You have some problems to access the files, or if you find missing files?

  Give the link to the thread in which you received the virus removal help.

  Follow the steps to run the Windows memory diagnostic tool.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

• Files disappeared after restore of Windows Vista recovery

  Hi, there, PC of my little brother had a big problem today. Coz the files disappeared after restore of Windows Vista recovery.
  How can he recover his files and other data?
  Thank you to you all.

  Hello

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• The files 'disappear' when you add a period to a folder or a file name in windows through GUI

  The files 'disappear' when you add a period to a folder or a file name in windows through GUI

  I don't know if it's a bug, but certainly doesn't seem like it should be the case. I tried on both 64-bit and 32-bit on windows 7. Does not make this error on XP or vista.

  Can someone explain to me what is happening?

  To reproduce, in windows 7 make a file or folder, and THEN add a ".". (period) to the end of the name of the file and look at the file "disappear". It's still there, just need to refresh (F5) and it reappears (w/o of the annex "." because it's an illegal file naming convention).

  I tried to do the same thing but through command line and it always auto corrects names of files to the conventions, and correctly, it remains on the GUI, so I think that the problem is related to the graphical mode of name change

  -Favre a. Reid

  Hello

  This seems to be a bug with Windows 7. We really thank you for this bug in our opinion. This will be the team of developers. Thanking you once again.

  Concerning
  Anthony.

• Delete or not; "System error Memory Dump Files" & "Debug dump files" in the Windows 7 disk cleanup program

  I am new to Windows 7, 64-bit OS and making the disk cleanup program. There are 2 unfamiliar topics with boxes to check what are the "Debug Dump Files" and "system error memory dump files.  I'm naïve as to what are these files and whether they contain all files that possibly should not be deleted.  Can anyone say and find out about what are the debug files and system error Memory Dump and if; Should I or not the check their boxes to get rid of all these files in particular type box?  Or could there be some Debug files & system error Memory Dump that might be of some importance and should not be deleted?

  Thank you for your time and any comments on this would be greatly appreciated.  Have a nice weekend.

  Tom R

  One good thing about Windows Disk Clean up is, only offer files delete them it is safe and will not harm your PC. Files of system errors and debugging dump files are created when there is an error in your system, and it creates a dump file that could be used for analyses. That say if you encounter blue screen error, dump file will create and if you find analysis you of cause of this problem. Whether or not you want to remove, you, some people will delete it only while others will keep the Explorer themselves later. But more importantly, it is wise to report them to Microsoft before deleting.

  To do this, open Control Panel and click under Maintenance contract and Action Center, click Check for solutions then it will collect all the information related to the errors and dump files and he could ask permission to send them and if you great permission, they will be sent. Once it was successful you can delete them.

  Sending the Microsoft dump files is a good idea, because there are teams who revisit and they try to find the cause and resolve it through Windows Update, or inform you about the possible solution in the center of the Action.

• In Windows 7 How to remove system error memory dump files?

  On windows 7 I got "system error memory dump files" when I tried to use the disk cleaner.  My computer is slowing down and does well at the mouse arrow.

  Advice so far is to use "Disk Cleanup" deleat these files however dialogue disk cleanup does not offer the choice to deleate "system error memory dump files" so what should I do?

  Hello GeorgeHood hugeohood1,

  You tried to perform drive cleaning in a clean boot?  Please let us know status.

  The problem of clean boot:

  http://support.Microsoft.com/kb/929135

  Thank you

• Dmp file that is created by Windows in a collision

  Why the dmp file that is created by Windows in a collision is unreadable by Windows, with a message that Windows does not recognize this file type. Really, it's quite shocking to have the operating system to create a file once a critical failure and the operating system cannot even read this type of file. It would be laughable if Windows has cost £/ $0.01 but it doesn't. It is quite appalling. I really don't want to download a third party software to do this, and neither turning well should I.

  You can follow the link below:

  http://support.Microsoft.com/kb/315263
  The reason does not provide native support for the type of file, is that the file contains complex entries that must be consulted for debugging by people who are aware of the work of Windows. But, Windows is used by the common people and it is not possible to expect everyone to be aware of this (like Linux) and so Microsoft provides no native support in Windows for the file type. So, those interested can download all the necessary tools to open the file. It's like Visual Studio.