Windows 7 network printer tcp ip port problem

Similar Questions

• Windows 7 - network printer installation fails - lack of hpzpplhn.dll

  Using psc 1610 all-in-in-one as a network printer on a small home network wired workstations XP and Vista.  Worked fine until I replaced the Office XP with a Windows 7 one.  First I installed directly connected to the Win 7 desktop computer, using the original CD - worked well.  Move the cable to the router, but the network printer could not be identified.  So added the printer giving the IP address of the port, but could not print with it.

  The latest version of the AIO_CDB_NonNet_Full_Win_WW_130_141.exe software, but still could not print.  Have another printer Photosmart C4480, decide to pass.  Had excatly the same experience.

  Has begun to hunt the messages of error, and in the case where the Viewer, I found the message that the network printer could be brought after due to a missing driver - hpzpplhn.dll.

  Where can I find the hpzpplhn.dll?  Help please!

  Wow, impressive set of tests!  Well done!  I think you have proved that it is not your computer or your software with this test.

  Non standard routers can often have standard and odd firmware means of handling something other than a Windows PC, Internet connection.  In my view, that a new router you would solve problems.

  Looking for a router "Wi - Fi Certified".  I like Linksys because, well, they are inexpensive and they seem to work reliably for years.  The WRT120n or WRT160n are easy to find on sale.  Amazon is a good start.

• (64-bit) Windows 7 network printing

  I want to print directly from my desktop Windows 7 (64 bit) on a network of HP printer WITHOUT the USE of an OTHER COMPUTER. I looked in the Web Jetadmin product, but from the technical description, I understand that print using Web Jetadmin on Windows 7 server does not support the definition of print queues. If this is correct, I need another solution. Any ideas?

  Hello.

  Install the printerdriver you need, IE 64-bit upd on maschine you and then insert the ip address or the printer dns name in the properties/port under ip address settings. This is the standard way to print directly to a network printer.

• Windows updates broke printing tcp/ip (Windows XP)

  After having installed XP 16 separate security updates 11 Oct, TCP/IP printing has stopped working. A "Test Page Print" prints and sends data to the printer (2 different printers installed all both have the same number), but then the print job stops and after a timeout there is an error of ball "this document failed to print" message  ~62K/62K sent to the print queue. A small part of the beginning of the document is left in the buffer of printing. Very small documents consisting only of a few words will print completely, but not normal printing. When printing large print jobs, only the first 64 K should be sent to the print queue.
  The author of the XPS document works very well.
  There is plenty of space on the hard disk > 120 GB free, and the file system is clean.

  Tried the following remedies:
  -Reinstall printer drivers - no difference, two printers are located during the driver installation, but fail in the same way
  -KB324757 followed by the printer driver won't reinstall - no difference
  -Disabled windows firewall (no firewall present AV) - no difference
  -Reinstalled NIC - no difference driver
  -Reset the stack TCP/IP - no difference
  -Added 3 new test printer, printing TCP/IP by WiFi - fails to find the printer on the network.

  Windows updates that have been installed:
  KB2861189, KB2862330, KB2883150, KB2879017, KB2827329, KB2861697, KB2868038, KB2827324, KB2760591, KB2827326, KB890830, KB2862335, KB2762585, KB2847311, KB2863239, KB2827330

  Maybe the dreaded KB2862330 once again:

  http://Permalink.Gmane.org/Gmane.comp.Security.patch-management/2795

  Also mentioned in this article of mega:

  http://home.Comcast.NET/~itdave/site/?/page/Microsoft/&PHPSESSID=5c4a2c67d806f72bcab8f936e6b63e84

  However at the time of writing, the TCP/IP fault is not mentioned specifically on the document of Microsoft for KB2862330:

  http://support.Microsoft.com/kb/2862330/en-GB

• 5150 Windows 8 network printing

  I have a new HP AIO running Windows 8.1 and want to print on a Deskjet 5150 connected to an XP machine (on the network).

  First of all - if I use Windows 'printer' Add dialog box shows the network printer in the flat view and then I select him and it purrs away for a while and said his "connection to HP 5150 on...» ", after much checking Windows Update, he said"no driver found ".

  In the same dialg box there is an option to install the driver manually, after which he wants one. INF file. So I point to various HP 5150 driver downloads Windows, Vista, full XP, XP 8.1 a minimum and he do not like one of them.

  Second - if I use the HP Windows 8.1 Deskjet 5150 driver and check the "my printer is already configured for use on the same network as my computer", after much soul search (and probably printer hunting), until appears a dialog box saying that 'no network device found ". Well we can't try too hard too stupid little more sees me the shared network printer-5150.

  Third, I put some time in the search on the internet and to this day, I found not anyone who tries to do. I don't want to put the 5150 on Win8 machine because of the desktop environment.

  Anyone?

  Try to set up as a local printer 5150 on Win8 computer.

  Add a printer
  Add a local printer
  Select create a new port:
  Select Local Port for the port Type:
  Enter the name of the network to the XP computer that is. \\XPcomputername\printerid
  Install the 5150 driver when prompted

• Windows 7 network printing problems

  I've upgraded to Windows 7 from Vista Home premium, the two versions are 32-bit. If you are using Vista and I tried to connect to the printer on my home network using a wireless network to a runing XP Home Office, I receive an error message that says: access denied. I get this same message using Windows 7. He sees the printer on the network but will not connect. If I connect the printer directly to the laptop, it works fine.

  Your "Access denied" error indicates that you do not have file/printer sharing set up properly.

  Configure file sharing / print:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers.

  How install a printer connected locally to a different computer if the driver installation routine does not help:
  
  Go to the computer to which the printer is connected. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

  Now, go to the remote computer to which you want to add the printer. Control Panel > printers > add printer

  Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

  ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

  Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish. MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 network printer problem

  I have a desktop running on SBS 2003 network.  All except one of the clients are Win XP Machines, it of a Win 7 machine installed a few years ago and has access to all network printers.  I have added a new Windows 7 PC to the network, Office 2007 works very well, as with most applications, but unlike the other Win 7 machine when we try to add a printer, he said ' User Services Active Directory Domain is currently not available ".  I tried to copy the victory & machine which works ok, but a drawing space.

  Also I can not access the company Intranet for our system to SharePoint, do not know if the two problems are related?

  Any help is appreciated as the number of entrances to the ' hasActive User Directory Domain Services currently not available ' do not seem to solve my problem briefly.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  I hope that helps!

• HP Deskjet 970Cxi: HP printers - install another driver in Windows 7 to print USB connection cable - PROBLEM

  Hi - I have a HP Elitebook6930P running Windows 7 Ultimate x 64 and a printer HP Deskjet 970Cxi with a USB connection.

  I try to get printing to work.

  There is a 970Cxi pilot in the laptop, but it won't work.

  HP have a support document - "HP printers - installing year Alternate Print Driver in Windows 7 for a USB connection cable" - and I tried to follow this exactly a number of times without success.

  The problem is that it is inaccurate and contains instructions that do not work and refers to procedures that do not exist in Windows 7.

  Therefore, I have no success in the conclusion. I can not communicate with HP for assistance, or no explanation as to why their document will not so blatant.

  Can anyone help please?

  This widget could not be displayed.

• Duplex with our laserjet HP4100 and Windows 7 network printing

  We have two new HP with Windows 7 desktop computers and you try to use the front and back of our network service HP laserjet 4100 dtn can you suggest the correct drivers or settings please?

  Hi, this might be the question why his does not work.

  It's a bug in Windows 7. The duplexor is reported as not installed by default, so you'll have to change that.

  Go to the Control Panel, find the devices and printers, then click on it. Then right click on your printer icon and choose 'printer properties '. In the new screen go to the "Device settings" tab and under "automatic duplex print unit" set installation options on installed. Should be on is not installed by default, so change installed, then click on apply. Restart the software and perhaps even your computer and check that duplex printing is an option now.

• Network printer does not print the laptop Documents

  I have an Epson SW235X printer wireless connected to my network via WiFi.

  2 desktop computers, 1 laptop and Tablet are also on the network.
  I can print from the 2 computers and tablets, but can't from my laptop.
  When I print (from word, the adobe reader software, etc...), it shows "Printing Page 0/0", epson event Manager, and after a while I get an error in the printing queue that says "error - printing".
  The problem images are below.
  Images:
  http://ImageShack.us/photo/my-images/715/printstats.PNG/
  http://ImageShack.us/photo/my-images/32/eventmanagerf.PNG/
  I uninstalled and reinstalled the software from the disc supplied.
  I have updated the drivers for the printer from epson site.
  I tried the application Microsoft Fix It printer problems.
  None of the above worked.
  Help please?

  Hello

  I'm sorry to hear that you have problems printing the laptop.

  Did you make any changes before the show?

  He has already worked?

  You receive an error code?

  I suggest to follow the items below and let us know if it worked.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Also applies to Windows 7

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  You can follow the suggestion of MichaelT777 from this link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-printing-problems/49458c16-e99e-4af9-8cd9-40299af66f8e

  Temporarily turn off the firewall and Antivirus

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• Network printer with XP and Vista

  I initially installed my printer (Canon i850) on the XP computer, then I disconnected the USB cable and plugged into the Vista computer.  Vista has found a driver and it worked.  Then I put in network computers via ethernet and a router.  Now, I try to add the printer as a network printer on the XP computer, but he can't find a driver.  Computer that needs a new driver and what type?
  Is not the XP computer generate a print file using a XP compatible driver, send the file to the Vista machine, and it sends the file to the printer?  If that's true, he should be able to use the driver that is already on the XP machine.

  Extremely misleading terminology

  When you use the Add Printer Wizard you must select: "Local printer attached to this computer" even if the printer is connected to another computer.
  Only after that I tried this option has noticed the "(i) ' who says: to configure a network printer that is not attached to a print server, use the»»
  local printer option.  Indeed, he tells you to do two things in the face.

  I think that the Assistant must have been modified to only three choices: (1) Local printer, network (2) printer connected to another computer, (3) network printer attached to a print server.
  The underlying confusion is due to the double meaning of the term "network printer".

  My problem is now solved, but not through Microsoft or you guys.

• Active Directory Domain Services unavailable problem windows 7, wireless printer; no TCP/IP ports

  Hello.  I have a HP 8600 printer that is no longer connects to my home PC.  The printer will always print whne using my laptop with no problems. The printer was working with the PC at home until about 6 days ago.   I tried a system restore and the question did not correct himself.  The error I get is related to ports TCP/IP is not available.  These errors occur when I try to add devices.  I installed and re installed the driver a couple of times and that didn't work.  I tried to add a TCP/IP port and the error message refers to the TCP/IP Wizard is not available.   I tried to add the HP 8600 via a USB cable and I get the same errors and have the same problems as described above.  I tried to add a HP 6310 to the PC via USB and I get the same errors and have the same problems as described above.    The 6310 works however with my laptop.   I tried the HP printer doctor software, but the question does not seem to be with a printer.  Issues seem to be attached to the PC and ports TCP/IP is only not available.  Can someone help me please to solve problems?

  Hey Joe,

  This might have caused due to corrupted printer drivers or ports.

  Uninstall of the printer with traces and reinstall again will be able to remedy the situation.

  Please try to follow the suggestion and check them off below if it helps:

  Please disable third-party firewalls installed on the computer, sometimes firewall blocks ports.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 1: Reset TCP/IP

  Please follow the below article which will help you to reset TCP/IP

  https://support.Microsoft.com/kb/299357?WA=wsignin1.0

   

  Method 2: Troubleshooting printer

  It is an automated tool that will check for problems and automatically fix the problem.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  IF the first method did not fix the problem go to method 2.

  Method 3: Uninstall the printer using Microsoft fix

  This fix it will remove drivers with all traces in the computer.

  Note: Please uninstall all programs associated with the printer.

  http://Support2.Microsoft.com/mats/program_install_and_uninstall/

  Method 4: Reinstall the printer

  Please use the floppy disk provided by the manufacturer of the printer to reinstall the printer into the computer and see if it helps.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows XP + kyocera FS-720 + EPSON TM, network printing problem

  Hi all, I am coneccted a Kyocera FS - 720 to compurter 'A' using a USB port, the impression here is ok. I have a second computer 'B' with an Epson thermal paralel set as printer by default, 'A' is the hollow network the Kyocera printer share.

  If I have any software in 'B' printing default Kyocera open impression and send anything to print, printing!, but if I selected in 'B' the EPSON as the default printer, open any program (IE, Acrobat, etc.) one try to print to the printer Kyocera, the app crash and nearby.

  If I select a different paper size in the config EPSON, A4, for example, a test print, once again works!, but using the paper as "Roll 80mmx270mm" size printing fails. I don't think that he is a pilot error or cause of error printer I print if I put it by default before you try to print, any suggestions?

  See you soon,.

  Alan

  Hi ZagatoGekko,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. you receive an error message when printing application crashes?

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  Method 2

  If the previous step fails, then I suggest that you uninstall all drivers and software associated with the computer Windows XP Epson printer using the Device Manager and the Add/Remove Programs, and then later reinstall the latest Epson printer drivers from Epson site and check if that helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  See the link below to download the drivers for the Epson printer.

  http://POS.Epson.com/contactus/contactTS.htm

• Problem installing HP Pro L7590 JO as a network printer on Windows 7 64-bit DT new

  I replaced a Vista desktop with a new Windows 7 Pro 64-bit office.  HP OJ Pro L7590 was installed as a network printer on the previous computer.  The new Win 7 DT is in place and works very well (has internet access).  I downloaded the complete function for Win7 64 bit driver but am unable to complete the installation.

  When I run the Setup.exe application it shows in the task manage but no installation windows don't open.  I tried as admin, no luck.  I run the script to uninstall HP and rebooted.  I disabled the time real AV or firewall (McAfee) and tried to run setup.exe as administrator.  Same behavior.  Setup.exe shows 20K memory usage, but no installation window opens.

  I have not yet tried change the startup settings (selective startup, disabling all services other than Windows).  This will be my next step.

  Any other recommendations would be appreciated.

  Kind regards

  Jim

  Solved the problem by running msconfig.exe and disable all McAfee services.  Printer installed without problem.  Printer installed just to disable the AV and firewall in real-time.  Actually had to stop all McAfee services.

  Jim

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1