Tecra S3 - error code 43 on video card

Similar Questions

• Windows 7 - Pci to Pci bridge (error: Code 10)-PCI video card

  Before that I declare my problems I will list what I'm running and I am trying to accomplish.

  I'm under edition 64-bit of Windows 7 Enterprise, not the Beta or RC. I have 3 video cards in my possession (listed below).
  -(PCIe) Evga GTX260
  -(PCI) Evga 9400GT
  -Evga (PCI) Fx5500
  Out of these 3 cards I only use the GTX260 and the 9400GT. I had to "retire" the Fx5500 because drivers latest WHQL (certified) only provided support as far down as the cards of Nvidia "6 series". Unfortunately the Fx5500 is a 'series 5' and falls below this line. I already tried to use the GTX260 and Fx5500 in earlier versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same video card do - you will have nothing else to errors. There is the option to go to a place like guru3d.com and download a supported driver custom which covers both the GTX260 Fx5500, but drivers are not certified and lack support. Therefore, I bought and now use the 9400GT is covered by pilots for the GTX260, which eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.

  Now that you have some info here is my problem, whenever I have install the 9400GT as I get a second entry "pci to pci bridge" (the other entrance has no errors) that appears under "System devices" in Device Manager. The entrance of bridge pci to pci second has a yellow triangle with an exclamation point, which refers to a problem. When you check the properties of this unit it is more or less said that Windows has detected a problem (error Code 10). The GTX260 is still working and still comes in "graphics cards" as a GTX260, but there is no entry for the 9400GT. I tried the 9400GT in two PCI ports and each time it does the same thing. If I get out the GTX260 and ONLY operate the 9400GT, I always get the question of the pci to pci bridge, BUT I get a picture and can boot into Windows 7 without a hitch. When I do that it is still nothing listed under "graphics cards" as a 9400GT or even a VGA compatible device.

  After messing around with this for 10 hours (Yes, I said 10 hours) I decided to dig my retirement (the Fx5500) PCI video card. When I installed this card I had no entry bridge PCI to pci 2nd appear under "System Devices", and one that appeared had no yellow triangle or error codes. I then checked under "Graphics cards" and Windows 7 it was recognized as a VGA-compatible device and asked for drivers.

  Now, I have concluded that there is absolutely no problem with the motherboard or my material (including video cards). In a first time EVGA support and I had suspected that the motherboard may be bad because of all the pre-diagnostic steps I had taken during my test of 10 hours. I won't enumerate what I did because it would literally take 3 hours to type everything in it. Just believe me when I say I've tried many things including but not limited to the latest bios updates (flashed 4 times and reset to ensure accuracy), IRQ customized management, all OS X 2, multiple/latest chipset drivers installed, reinstalling video multiple/last drivers installed, memtest test, complete equipment disassembly and re - build (adding a device at a time) and MUCH more. The only thing I have not tried installing another OS other than Windows 7 64 - bit to see if I could reproduce the problem. It's a waste of time, but because that let's say I install Windows XP Pro and the 9400GT doesn't have this problem... Well, that's fine, but who cares on XP Pro when I used it for the last 9 years and when I have a version full of Windows 7 I want to use? I'm certainly not running XP Pro on Windows 7 just to use the PCI video card. Second, if I install XP Pro and it always gives me the same error of bridge pci to pci and then, I only lost more time than because if it s not to go to work or the other OS, then I m sure that hell will not leave XP Pro installed when I use Windows 7.

  Thank you
  Piyush

  Maybe a stupid question now but has your post anything to do with Toshiba and Toshiba computers laptops?

• Tecra M2: Can I replace the video card integrated?

  Is it possible to put a new video card for Tecra M2? Pls answer... Thank you :D

  GPU is mainly set at the Board of Directors and cannot be upgraded.
  It's not only a case with the portable Toshiba but and graphic map update is not possible on all laptops from different manufacturers.

• Error code 39 on network card

  I just had to perform a custom installation of Windows 7. Before the restoration had a network card using a USB port to connect to my local network.

  After installing Windows 7 get an error code 39 on the adapter.

  Troubleshooter does not solve the problem.

  I've uninstalled and reinstalled the driver and get a message saying that it is up-to-date.

  I have checked the registry and do not see 'Lower or upper filters' under the appliance.

  Am at a total loss as to how to solve the problem.

  Any help gratefully received.

  Thanks a lot for your suggestion. Unfortunately, as the problem is with the network card driver were not able to access the internet through this computer.

  However I solved the problem by restoring the system to just after the installation of Windows, by removing the material and the old drivers. Reboot and then install a new driver from the manufacturer of the chipset instead of the drivers on the website of the manufacturer of the device.

  Thanks for the good suggestions - much appreciated

• Tecra M2: Error Code 10 on NVIDIA GeForce FX Go5200 32 M / 64 M

  When I am browsing on the internet my screen suddenly cracks like a t.v with no signal cable, but I still see the mouse... when I restarted the laptop, start up, cracks on the screen and lines etc. are always there-_ - I can't install my display driver, it's always the (10) error code - need help pls...

  Looks like a hardware problem. Especially if you see the problem * front * Windows start.

  It could be the LCD screen, but if you can not install the correct display of Toshiba driver, which usually indicates a problem with the graphics chip (on the motherboard)

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) my video card does not work why?

  can u help me quickly?

  Hello

  -For how long have you had the problem?
  -Did you change your computer, after which the question began?

  I suggest that you uninstall and reinstall the drivers for video card and check if that helps.

  Uninstall or reinstall a device

  Note: Not applicable for Windows Vista also.

• Is Tecra A9 - possible to upgrade the video card?

  Hey there,

  I have a Tecra A9 PTS52E and it has an Intel integrated graphics. I read that this means that I might not be able to upgrade to a better graphics card.
  Is this true?

  Thank you

  Hi glintings,.

  > Is this true?
  Yes, it of true because the graphics card is attached to the motherboard, so an upgrade is not possible.

  Also visit this interesting link:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Error code 38 for SD card reader

  I use Win 7 64 bit on a Dell Studio 17.  Everything has been fine for over a year.  Couple of last weeks, I can not read my SD card when I go out and reinsert.  Device Manager indicates this 38, software already load in memory.  I tried to uninstall without help.  Only solution is to restart the computer.  I use Norton and Malwarebytes, but they were up a race for quite some time with the SD reading very well.

  Thanks for the help.

  Hi EZFL,

  I proposed to open Device Manager, click on the view tab and select Show devices.

  You can remove all instances of the SD card and reboot the PC with the card in the drive to see if it loads correctly.

  You can remove all other devices from the PC while troubleshooting.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  Hello

  I recently rebooted my computer; (Packard Bell) and now cannot run games or screen savers because it does not start. I think my problem has something to do with a Direct3D card? When I run screensavers, I get this message:

  Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D.

  I have the impression that sound when I run the 3D games, such as minecraft or GMOD.

  I run on Windows Vista Edition Home Premium and does not do anything but re - install my computer because it wouldn't start.

  It is not as if the graphics card is not there, so I'm really confused!

  Please help me, like playing games is my favorite thing. ;)

  Charlie

  I also ran minecraft to double check and I got this error code:

  Bad video card drivers!

  -----------------------

  Minecraft could not start because it did not find an accelerated OpenGL mode.

  Generally, this can be corrected by updating the video card drivers.

  -BEGIN 7fe0271 error REPORT-

  Generated 10/10/12 21:04

  -Minecraft Version: 1.3.2

  -Operating system: Windows Vista (x 86) version 6.0

  -Java Version: 1.7.0_07, Oracle Corporation

  -Version Java VM: Java hotspot Client VM (mixed mode), Oracle Corporation

  -Memory: 422585352 bytes (403 MB) / 518979584 bytes (494 MB) up to 1037959168 bytes (989 MB)

  -JVM Flags: 2 total; Xms512m-Xmx1024m

  -LWJGL: 2.4.2

  -OpenGL: ~ ERROR ~ NullPointerException: null

  -Is Modded: Probably not

  -Type: customer

  -Texture Pack: ~ ERROR ~ NullPointerException: null

  -Position profile: N/A (disabled) [can't get system (java.lang.NullPointerException) properties]

  org.lwjgl.LWJGLException: Pixel format not accelerated

  at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)

  at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)

  at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:185)

  at org.lwjgl.opengl.Display.createWindow(Display.java:311)

  at org.lwjgl.opengl.Display.create(Display.java:856)

  at org.lwjgl.opengl.Display.create(Display.java:784)

  at org.lwjgl.opengl.Display.create(Display.java:765)

  at net.minecraft.client.Minecraft.a(SourceFile:233)

  at net.minecraft.client.Minecraft.run(SourceFile:516)

  at java.lang.Thread.run (unknown Source)

  -REPORT of ERROR END bb61788b-

  Hello

  After you reinstall the operating system, you should also go to the website of your computer manufacturer > drivers download section > put your computer model number > search for your operating system and drivers (graphics, audio, etc.) > download and install.

  See you soon.

• Runtime error on the desktop - no error of birdthrowing comes from the video card software

  Original title: graphics card error I guess that

  computer is turned on after 15 minutes, run-time error is an error right when I say he sometimes makes the desktop icons does not reset, no birdthrowing error is from the video card software
  How can I solve this problem

  name: Toraman Uygar

  Hello

  • What is the full error message that you receive?
  • How long have you been faced with this problem?
  • What were the changes made before the issue occur?

  You can check this link:

  Windows XP restarts unexpectedly or restarts when you shut down the computer

  http://support.Microsoft.com/kb/320299

• Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

  I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

  We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
  Kind regards
  Sam Towle

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: make sure the game is compatible with your computer.

  Method 2: update the video card driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If both methods fail, you will then need to get a new video card.

  I hope that helps!

• Code 39 - video card driver. already tried to reinstall the drivers several times.

  Suddenly, I lived this issue one day after having had a normal life with a new video card.  It was quite well until you restart the next day, where he then reports in Manager device which:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I am completely puzzled, as I have:

  -If she had problems with drivers-free work provided by the CD the initial day of the installation,
  -A tried several installations of:
  (a) CD drivers provided by.
  (b) latest driver from nVidia.
  (c) later twist driver Xtreme-G.
  (d) to allow Windows Update to install the drivers.
  -Also attempted to return to the old video card and using [compatible] drivers for it, but it returned code 39; This video card, I had no such problems with in the past.

  The first noticeable symptom has been toggled off Aero and the resolution to 640.  I am unable to run several games/etc. as the video card is automatically disabled "because he has a problem.  My graphics card is an ASUS 240 512 DDR5 ENGT, and the old one is eVGA 9400 GT; my OS is Windows 7 x 64.   The first time using the map with this computer, it was compared with the time 3D games Vantage / real and proved to be stable and functional order.

  I can't do a restore with the drivers, or have no system restore points.  Everything is fine and I can still watch videos (assuming that the CPU is handling); I can also run games like Starcraft, which I suppose doesn't require DirectX or anything that requires a dedicated card.

  I tried the sweeper driver as well as the General uninstaller, and he still refuses to acknowledge the drivers - this was done after a full withdrawal of all components of nVidia ("NVIDIA Drivers", PhysX and NVIDIA Control Panel); However, I saw again the nVidia control panel in the Panel of the menu start (no uninstall programs and features). my steps were:

  (1) Uninstall using programs uninstall,
  (2) secure using mode driver sweeper,
  3) reset, once again in SafeMode to aid driver sweeper,
  (4) restart, install the drivers.

  Of this, I was successfully able to disable the generic automatic installation of drivers window; later, I was able to install the video drivers.  However it still does not.  The Control Panel also continues to say, "Now you do not use a screen attached to a NVIDIA GPU", and Device Manager reports code 39.

  I'm running out of ideas, so I'm looking for outside help for this problem - I appreciate any information you may be able to provide.

  Check the programs and features (and memory), I can say that I have nothing else that the drivers installed for the new video card.

  I reinstalled the drivers for the 9400GT when I was testing to see if the replaced card would fail, and he gave the code 39.

  Thanks for your comments.

  EDIT: The problem seems to be fixed after a reinstall of Windows.  I give my thanks to both of you for the effort.

• Used the update and now the video card is not recognized

  I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized.  I get the BIOS beep code for no video card or bad video memory.  I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
   
  System-Vista Home Premium 64-bit
  Palit-card nVidia GeForce 9600 GT graphics card

  Oh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.

  Hi JohnyDick,

  This problem seems to be due to the updates of Windows, although it could be a coincidence.
  I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
   
  If the problem persists then I recommend you to contact the computer manufacturer for assistance.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to upgrade my video card?

  My kids want to play minecraft on my laptop but I get this error msg

  Bad video card drivers!
  -----------------------

  Minecraft could not start because it did not find an accelerated OpenGL mode.
  Generally, this can be corrected by updating the video card drivers.

  How to upgrade the video card?
  Please help =)

  Thank you

  Hello

  If it is a laptop, you cannot change the video card. Only thing you can do is to
  of course, you have the most recent drivers. Laptops almost always have a built-in video device
  that is wired in and cannot be deleted.

  Check with the manufacturer of the laptop computer for updated video drivers.

  I hope this helps.

• My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any mention of this code error or failure anywhere

  My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any reference to this error code or failure anywhere, either in the "help", on Microsoft Support sites, or on the community boards.

  I have updated all drivers for this graphics card (AMD Radeon HD series 7900) and all the surrounding drivers with the AMD software.

  I can't find any information, so I don't know if I should get a new video card (which seems to work very well) or if I should just ignore it.

  Someone at - it ideas?

  Raven

  Computer Alienware Aurora R4
  Windows 7 x 64 OS
  AMD Radeon HD series 7900 graphics card

  Original title: Error Code WVC07-LB8

  Hello

  As you mentioned that you have already updated the AMD graphics card drivers, could you let us know if you see any exclaimation or any error in the device under graphics card Manager?

  Are you facing any problem with your graphics card, video, or your screen resolution?

  As Alien Autopsy Global System Tests showed you the error, I suggest you to get tap dell JDM for more support asiistance if you have any problem with Yon graphics/video card or screen resolution.

  For your information: once you uninstall your graphics card drivers, windows has its own built-in drivers that will automatically charge the generic drivers. If in case it does not load you can search the hardware changes, this will probably load the generic drivers.