Windows 7 personal folders and trash of slow loading.

Similar Questions

• Windows XP - I connection and it hangs at "loading personal settings".

  Original title: Windows XP - I have login and it says "loading personal settings".  I can't go further than that.

  I ran Microsoft Security Scanner and we remove an adware.  Then I need to restart the computer, which I did and not it's just straight up "loading personal settings".  I can go from here to solve the problem?

  Hello

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2:

  I suggest you perform the clean boot and check

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfigand click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Need help as soon as POSSIBLE! I can't turn the volume on Windows Live Movie Maker and video is slow

  I'm reading a file .mov on Windows Live Movie Maker 2011 Version (Build 15.4.3555.0308). I had to install the media player codec pack (version 4.2.3.1001 the file) in order to get the video to play on WLMM and he finally managed to where I could see the video, but now will not play sound. I went into Edit and the Volume of the video and mute is activated, but he won't let me not reactivate the sound by clicking on it. The scroll bar can slide backwards, but does not make a difference. Already, I went and "repaired" Windows Live Movie Maker in my programs. The video has sound when he played on Windows Media Player isn't the video or the speakers.

  In addition, the video is very slow and jumpy. It's almost as if it was in slow motion or something.

  Help, please!  I need to have this video made as soon as POSSIBLE. I need to be able to start editing here tomorrow!

  Thank you
  Tamara

  I'm reading a file .mov on Windows Live Movie Maker 2011 Version (Build 15.4.3555.0308). I had to install the media player codec pack (version 4.2.3.1001 the file) in order to get the video to play on WLMM and he finally managed to where I could see the video, but now will not play sound. I went into Edit and the Volume of the video and mute is activated, but he won't let me not reactivate the sound by clicking on it. The scroll bar can slide backwards, but does not make a difference. Already, I went and "repaired" Windows Live Movie Maker in my programs. The video has sound when he played on Windows Media Player isn't the video or the speakers.

  In addition, the video is very slow and jumpy. It's almost as if it was in slow motion or something.

  Help, please!  I need to have this video made as soon as POSSIBLE. I need to be able to start editing here tomorrow!

  Thank you
  Tamara

  ========================================
  Apple QuickTime. MOV video files were problematic
  in all versions of Movie Maker. Best bet would be to convert
  the. MOV files to the. Before you import into WMV format
  Movie Maker.

  There are to many converters available on the net... both retail
  and freeware... the following freeware converter is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

• I reinstalled Windows XP Professional SP3 and also formatted my HDD (IDE), but before it displays the loading screen, it shows a BSOD disappear but before I can read it. What is the problem?

  Hello, as I said in my title, I reformatted my IDE HDD and reinstalled Windows XP Pro SP3, and before that it loads, s it just shows a BSOD screen without me being able to read. Anyone know the problem?

  Microsoft? Why always SP3 Gets the problem? -__-

  Did disable the auto reboot not to reveal information of BSOD?

  On your SkyDrive, you must click on share, change permissions and adjust the slider upward, so that we can him.

  In fact, you have an XP with SP3 installation CD?  It's kind of a miracle here.

  Where did you buy that and when you bought it (just curious).

  I'd take a peek here first:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01457284

  and then here (too much info really):

  http://msinfluentials.com/blogs/Jesper/archive/2008/05/08/does-your-AMD-based-computer-boot-after-installing-XP-SP3.aspx

  If you need help, enter the XP Recovery Console, just ask.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• EA4500 - slow loading for Web sites randomly

  Hi guys,.

  I have this problem, try to load sites like http://animeflv.net/ or http://www.reddit.com/r/leagueoflegends/ that they get stuck and start very slow loading. I follow the guide MTU and set it to 1300, but it did not improve it.

  Also, I did reset using the administrator and manually by pressing the red button. Really, I don't know what to do and would like to help.

  Thank you.

  At the end of the day, he fixed himself, ISP problem, I guess. Thanks for the help.

• TWO wanted work stations, one with my working files and other with personal folders. It seems that spaces works with windows, no records.

  I have OS X 10.11, El Capitan, on MacBook Pro.

  I would like to have TWO offices and one with my files to work with personal folders.

  How can I do this?

  I looked at spaces, but it seems to work only with windows, no records.

  "with my work folders and the other with personal folders": you can not do this.

  The best method is to create two accounts: a personal and a professional. What accounts are for. Pass from one to the other may takes 2 seconds.

• Is it possible to extract personal folders from my hard drive and transfer to an external hard drive if Windows does not start?

  Hello, I recently started my Windows XP Dell computer and it should start up normally unless it would run the ChkDsk utility. It would freeze then 68% on stage 1 and goes no further. I called the people of Dell and after trying so many solutions, including safe mode, safe mode with network and CommandPrompt, we ran the diagnosis. The hard drive and memory are fine, no errors. He concluded that it was the operating system and must be restored. However, I have important files, I need to extract from my hard drive and he recommended me an external hard drive. I bought it, but now I'm not sure how to extract my files from my drive hard if Windows can not even boot the desktop computer. Is it possible to extract these files without the use of the desktop computer?

  And you've burned the .iso image, and not as data? If Yes, then you have created a bootable CD. Put it in your optical drive and restart the computer. You may need to change the boot order in your BIOS. With some machines, you can get a temporary startup command menu by pressing a function such as F12 at startup. Other computers require that you enter setup and change the boot order in the optical drive first of all from there. When you start your computer it will be information about which key press to enter the BIOS (Setup) or give you the temporary boot order.

  After you changed the boot order to boot first from the CD and rebooted the computer, Knoppix will boot. Have your external hard drive connected to the computer before you start doing this. After Knoppix is finished booting, you will be in his office. It will be very similar to Windows. There are icons on the desktop for your internal hard drive and the external hard drive. Copy files from the internal to the external drive as you want. Review what I wrote about the use of Knoppix in my previous answer. MS - MVP - Elephant Boy computers - don't panic!

• I have two with att pop3 e-mail accounts and 1 Imapi e-amil account G-mail. I'm trying to use one of the personal folders, but that a single e-amil acct will work with a personal folder. Can I change this?

  Windows XP MS Office 2003, all installed service packs, xp Pack all. Processor AMD x 2 with motherboard Gigabyte.
  Professional Outlook allows me to specify records personal on my e: drive, not in the Documents and settings folder, but continues to put the Imapi gmail Inbox there after that I told it to use the folder to the E: drive.  Pop3 e-mail accounts allow me to use the E; the player in the form of personal folders folder, but that one email can only be sent or received.  Is it possible to use all email accts a personal folder where I want instead of the default value. Where is the default definition that requires him to go into the Documents and Settings folder, and why should I have a personal file for each email account?

  No, if you have an imap account configured, they must all be of pop email accounts, then you would have a unique set of default folders.

  In your current configuration, you would have one set of personal folders (for pop mail) and a second set of Imap folders

• Mail electronic-Windows - lost my personal folders in the Windows Messaging

  I lost my personal folders in the Windows Messaging, I think they are still on the computer that I don't know where to look or how to get Windows e-mail to reattach them?

  Go to view | Layout and make sure the folder list is checked.  If this does not help, and then search for *.eml locate messages.
   
  Steve
   
  "wlh601" wrote in message News: 0186e018-cf09-49 d 5-994b - da24881eef30...

  I lost my personal folders in the Windows Messaging, I think they are still on the computer that I don't know where to look or how to get Windows e-mail to reattach them?

• Slow, remove messages received, sent and trash messages ok Norton tech support does not say their prob.

  Messages slow removal, sent and trash work correctly. Contacted Tech Norton Norton disabled still have the problem. Don't reset Norton firewall no help.

  Try to start Windows in safe mode with active network. -Win10 https://support.microsoft.com/en-us/help/12376/windows-10-start-your-pc-in-safe-mode

  Always in Windows safe mode, start Thunderbird in safe mode. - https://support.mozilla.org/kb/safe-mode

  The problem goes away?

• NAS200 - cannot access personal folders of Windows

  Live chat with Linksys re: NAS200: my side of it.

  On a NAS200 I install a user called 'jon' with a personal file and a password. Problem is, I don't see how now to access folder Jon of Windows XP in the same way that I can access the public folder.

  I get "\\Nas200_9792de\public disk" Windows and files read/write without problem, including several subdirectories, I created it there.

  After you create a user, I guess I would then be able to access the file with something like \\Nas200_9792de\jon for example. I tried a drive letter of mapping, but get an error message

  on "network folder is mapped currently...... try a different username. But

  nothing alse is currently mapped.

  If I try"add a network place" I get "the folder you entered is not valid. Please choose another. "

  I've updated the firmware to V3.4R75, but this made no difference

  I searched throughout the "NAS200 User Guide.pdf" and he gives no explanation on how to access the personal folders of Windows.

  I searched also Linksys FAQ but could not find a help there.

  Sincerely, Shaun.

  You can try using the network drive mapping utility that is included on the cd to map the file. To map a shared folder, please follow the instructions of thses:

  Right-click on the icon in the system tray. Click shared folder mapping. The folder mapping split screen appears. Select the appropriate network storage System.Select the shared folder if you don't see the folder you want, click the Refresh button. Keep the default drive letter or enter a different letter in the field of training. Then click on the map button. The shared folder opens automatically, and a new window will appear to inform you that the shared folder has been mapped. Click the OK button. On the mapping of shared folder screen, click on the close button. Double Clcick workstation. the shared folder will appear as a network drive.

• How to import personal folders of sbcyahoo e-mail in Windows mail

  Help, please!

  I'm syncing/importer my current emails from my account sbc.yahoo without problem.  My question is how to import all my personal e-mail folders (and files) to my email sbc.yahoo in Windows Mail account?

  I would like to access these emails/files offline and have a backup on my hard drive.

  Thank you

  Renee

  Hello

  You can check the following links for assistance:

  Configuration of Windows Mail to an account of end-to-end:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Import your calendars and contacts in Windows Live mail email:
  http://Windows.Microsoft.com/en-us/Windows7/importing-your-e-mail-contacts-and-calendar-into-Windows-Live-Mail

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After Windows 7 upgrade - duplicate files, folders, and applications

  I don't know if this is the right place for this question. After the upgrade to Windows 7 from Windows Vista, I had a lot more on my computer that I did before. I did an inventory of what's on my computer and found copies of almost everything I had 2-3. Is my only recourse now go through all the files, folders and applications and delete the extras? It is a mammoth task since I have almost 1 million files (such as indidcated by my most recent scan). I did this or he was depending on the upgrade to Windows 7?

  Leave me a comment aside: I've been using Windows since Windows 95, and whenever I go through an upgrade, need me 2 months to get my computer to where I could simply use it instead of having to fix it and fix it and fix it. Is this '' fun '' reserved for me alone, or others have the same experience?

  Never read your problem of duplicates of files is also system files or simply your personal files?
  If it's that much of a hassle tried to do a clean install?

  There are many duplicate files in the Windows.old folder on your C: drive?

  Usually, but not always, after I installed Windows 7, you'll have a Windows.old folder on your C: drive that contains data from the previous installation of Windows. Open Windows Explorer and under 'Computer' click the C: drive - if the Windows.old folder is on your hard drive, it will contain all of your files to the Windows system, and it can be removed if you do not need to free up space on your hard drive.

  Make sure that you can see the Windows.old folder:
  1. click on start, type: hidden
  2. click on 'display the hidden files and folders '.
  3. Click to select "show the hidden files and folders".
  4 uncheck the following three points:
  Hide empty drives
  Hide extensions of known file types
  Hide protected operating system files
  5. click on OK
  (Note: after you are done go back and double check "Hide protected operating system files.") If you want to change the other return parameters are.)

  How can I remove the Windows.old folder?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  If the Windows.old folder does not remove:
  In Windows Explorer, you should see a folder called Windows.old on your C: drive. That contains all of your files from your previous installation. If you need all the files, you can copy them to another folder and then delete Windows.old. If you do not need anything in the folder, it is safe to delete.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Start and stop is slow in Windows 7

  Original title: I desperately need some help here.

  I have a Toshiba LT, running the Windows 7 operating system. Start and stop is slow, so I downloaded

  MicrosoftFixit to analyze and fix my computer. It is scanned and was told that more than one anti-virus program is running, I'm only using Microsoft

  Security Essentials, also more than one user is logged on when I'm the only person using this computer!

  Several programs are currently running in the background at the start and during the shut down, but I can safely remove. Help, please!

  Hello

  Have you made changes on the computer before this problem?

  Method 1: Resolution of Performance problems.

   

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

   

  Method 2:

   

  Step 1: Check in safe mode.

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• Folder pane issue related to the folders that I created, compared with the default Inbox, sent, junk, and trash

  I have a bunch of folders and subfolders, I created for various projects, but I don't always want to see them. (that is, I want to "collapse", while most of the time - I just see the Inbox, sent, spam and trash folders.)

  The only option I see is the equivalent of a power switch - that is to say, file view/page/component layout, or no record.

  If you uncheck the folders pane, you lose the Inbox, sent, spam and trash folders.

  If you check the option part of file, regain you your visibility of the Inbox, sent, junk mail and folders trash... but you also see the bunch of files again.

  Is there an option in-between - where I can see (again) the Inbox, sent, junk, and trash folders - but only see a collapse (as in 1 folder that says something like "folders") - without having to create such a file and paste the slew of my other folders in the folder manually created?

  The only suggestion that I would have to choose the name of the account, not the Inbox but the name of the main account.
  Right-click on the account name, and then select new folder.
  Name the project or something that makes sense to you.
  Now right-click in project and select new subfolder.
  The name of the subfolder.
  Repeat if necessary.
  There will be a pointer next to the projects folder where you can expand or collapse the tree of project files.
  This will only add an extra folder, projects, when the project tree is reduced.