Windows 7 Pro update problem

Similar Questions

• Windows XP pro update page 0x8024400A error number

  I'm on my pc Windows XP pro and since I format, distribution it over and over and then re install Windows XP pro again and again (9 or 10 times) in the last week.,.

  I can't work Windows XP update page.

  I get "" error number: 0x8024400A this website has encountered a problem and cannot display the page you are trying to show. ' "

  All suggestions on this site of Microsoft points people he difficulty page.

  How to practice, this will not work unless Windows XP SP3 is installed.

  Is there something silt, then this thing stupid construction of Microsoft, to find the solution on how to solve an error with windows XP pro updates?

  I just don't feel the HD reformatting and waisting my time again and again when I have the same problem each time.

  BTW, someone read this if you have to re install windows XP and plus size your time by signing up immediately as you will certainly have to start over and over again!  MONEY IS good TIME BILL! Laughing out loud

  Hi phoe_nix,

  (1) what is the update that you are trying to install? I would like to the KB article number.
  (2) what are the troubleshooting steps you have tried to solve this problem?
  (3) did you change on your computer recently?

  I suggest to try the steps in the following link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

  Hope this information helps.

• When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  * Original Title: windows update

  When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  If anyone has any ideas on how it can be fixed please tell me

  Adam

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• Windows 8.1 update problem (I want to improve my Windows 8 Pro with media center pack)

  Hi, this is Rafi K, I recently installed win 8 64-bit on my computer dell laptop XT3, so activated my product key with MEDIA CENTER PACK, so now I want to improve it to WIN Pro 8.1. But I keep if you search windows 8.1 update, but it says "sorry this update is not available for your PC or you can run an edition of windows that does not support the update of the store", is if there's someone who can help me to update my windows 8.1 pro. Thank you! am waiting for your valuable response.

  Hello Rafi K,.

  Welcome to the Microsoft community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  According to the deciphering of the question, you can not upgrade your computer Windows 8 to 8.1 of Windows. So, I suggest to try the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/kb2919355-Windows-81-update-fails-800f0092-and/4d4d23a3-695a-4bd4-B340-d2ce9c75919d

  If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

  Kind regards

• Unable to get Windows XP Pro update

  When you try to install updates for Windows XP Pro, the installatoin fails. He said: "the following updates have not been installed, .net Framework 1.1 Service Pack 1 KB951847, KB2600217, KB2604121, KB2737019, KB2742595, KB2789642." How can I fix?

  View your history of update for the error codes.

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982 (including Windows 8)

  Use the foregoing as guides to solve the problem.

  If necessary, click the following link to download the .NET Framework cleanup tool:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
   

  You can use this to check what versions are actually installed on your computer:

  The user guide for the .NET framework installation check tool
  http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  If any - relocation order:

  1. .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
  2. .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  3. .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  4. .NET framework 4

  For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx

  For .NET Framework 4

  You can try the applicable repair just only the .NET Framework versions affected - http://support.microsoft.com/kb/976982

  Windows XP users follow these steps to repair the installation of .NET Framework 4:

  1. Close all running applications.
  2. Click Start, click Control Panel , and then click on Add / Remove Programs.
  3. Click Microsoft .NET Framework 4 Client Profile in the list of installed programs, and then click Change/Remove.
  4. Select repair .NET Framework 4 Client Profile to its original state , and then click Next.
  5. Repairs completed, click Finish.
  6. Click restart now.
  7. After you log in to Windows, click the Start button, then type Windows Update in the box to search for and then click Windows Update.
  8. Click find updates. When the scan finished, click install updates to Windows.
  9. Follow the instructions on the screen to install the updates of Windows.

  Ref: http://support.microsoft.com/kb/976982

• Windows 7 Pro update is not after the new installation

  I know that this question is asked many times, but I tried pretty much everything that is suggested and nothing seems to work, some worked for others, but they have not worked for me.

  I have replaced a failed hard drive on a Lenovo X 200 an old laptop that I was giving away he a son of friends who needed just for the College.

  I stuck in an SSD and saw genuine window 7 Pro licenses as was previously on Vista, I made a new installation as I've done a hundred times before, and then as always update windows first, but I'm just update Windows scroll bar I left it all night nothing happened.

  I tried using the Microsoft Easy Fix times nothing.

  I tried Windows Update Agent still nothing.

  I tried a suggestion here that seemed to have worked for others install (KB3102810) I did as stated on this occasion, he worked told him there are 225 updates and 18 in option more, I jumped in option one it seemed to work very well it installed just 13 with the lack of rest I restarted as requested but recede in windows it says Windows is up to date, that was impossible.

  I clicked on update again and it does what it was originally just to get the scroll bar that I left for hours and nothing, this is seriously my head in, I think that Microsoft is not going like it the impression that I'm being bullied by installing Win 10 and the person wants to win 10 , because they prefer to Win 7.

  Please could someone help me on this pickle was on this thing now for almost 2 days of installation then put in solid form and re install all to nothing does not.

  I would seriously some knowledge on it.

  Concerning

  It was pointed out Alan

  Ken Morely has the solution.   Follow precisely...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/following-a-clean-install-Windows-Update-remains/ff3c442e-79a6-40d3-AC35-29e130cebef1

  I've used several times, as many others have, and it does not have the problem you describe.

  Install all that it offers to the exception updates Windows that are not labeled security and are dated after 2014.  The reason is that all those who since have no value to your system and prepare your system to accept Win10 and provide information to Microsoft.

• Windows not genuine after failure of windows 10 Pro update

  I used my verson of Air Force free of windows xp for home when I was in the US Air Force as a 2E2.  I have more the instal XP disk or key.

  In the past that I had updated since XP to Vista Ultimate 3 pack.  So improved from that of Windows 7 Ultimate.

  Long story short, I left the Army Air and when moving apparently LOST those upgrade CD

  About 3 years ago, I decided to build an another PC game from scratch and bought a computer 3 Windows 7 Ultimate installation, NOT an upgrade.

  Because no windows 7 Ultimates were sold at the time I resorted to pay 350,00 USD or around that for a USB installation downloaded.  The people who sold me the download I put on a USB stick never ends by send me the actual key.  I'm at level my new computer Windows 10 Pro now and checked that the key was genuine before you install the update for windows 10.

  The windows 7 ultimate key reported as checked and I was receiving all the Microsoft updates on this computer for the last 3 years.

  I was running in the 80070005 error code when you try to run windows 10 update of Microsoft Update, so I decided to install from a USB key.  He was now working and install until after the first reboot when it has encountered an error and came home from my windows 7 Ultimate.

  My problem now is that my windows 7 Ultimate has no restoration no longer points at ALL!  And now my windows says that it is not authentic!

  I bought 2 x Windows 7 ultimate for autour almost 3pc in total 600 dollars!

  I try to contact Microsoft, but in any case, was told to reinstall from upgrade Xp to vista, upgrade to win7, then switch to 10!

  This is insane and now I am unable to do anything with my now NOT copy AUTHENTIC *!

  Can someone at Microsoft Search my MS account and check please that I own these 6 installs, 3 upgrades and 3 costs to install the keys!

  I can only find my machine key multi 7 fresh victory that I used 2 x so far on other computers, BUT I lost the installation software.

  I don't know what other that spend another $ 200 on a windows installation package cost 10.  But after this recital Im updated to scrap Windows and looking for a more user-friendly and coherent user to the BONE.

  IM limited to my handicap of 80% pay per month right now and don't really have an extra 200 bucks to pay and I ALREADY BOUGHT somany other keys!

  My fear is that 3 fresh keys 7 win a scam and I hope that my information has not been compromised.

  Please help this hardware tech with this software problem.

  There is no pack of 3 licenses of Windows 7 Ultimate version, only Windows 7 Home Premium has been sold as a bunch of family.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows 8 Pro Update 80096002 error code

  Hello

  I had also encountered same error

  Windows Update error: 80096002

  Windows 8 Pro (64-bit)

  Tried to use two convenience stores said that the problems are solved, but become again the same error

  Windows store says I have to install all updates to upgrade to 8.1 Windows, but unable to install updates

  This is a new Installation Windows 8 Pro (00178-10294-33899-AA447)

  

  

  Hi Olivier,.

  This problem is usually caused if you plug in external devices other than the mouse and keyboard, or if there is no program third party or apps that blocks the update settings. I would like to know some information about this problem so that we can help you further.

  1. have you connected external devices other than the mouse or keyboard?

  2 have you tried to install/check updates after a reboot?

  3. what security software is installed on your computer?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  If you connect the external devices other than the keyboard and mouse, then try to disconnect if and check if you are able to install/check updates.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. Clean boot helps you disable all non-Microsoft services, so that we can check which third party/app program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try the procedure described in the following Microsoft Help article and check if that helps. This article contains information about how to upgrade to Windows 8.1 Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Please reply with the status of the issue so that we can better help you.

• Windows 8 Pro startup problem

  Dear friends

  I have a Pc assembled with 8 GB of Ram. Hard drive 1 to, 1 GB memory graphics + DVD Writter.

  There the partion to C. H. I have a licensed version of Windows 8 Pro 32 bit (Dick Original). Win 8 pro is installed in C: (space is 100 GB).

  It was working fine. Latest installation has Samsung Kies.

  But the day before yesterday when I swtich on the machine it started but I noticed that it took more time to start. and sudddenly he freezes on.

  So I stop it and new Rebooted

  He then suddenly splashed the message below (or similar) I would not even read. The only offer I got was ' your PC encountered a problem '.

  So I googled and got the other party. It could be another message but I am sure that the ' your PC encountered a problem ' part is the same.

  "Your PC ran into a problem and it restarts. responsible for collect just some info the error and then put back on well for you (100% complete). »

  The message did not sleep there. Immediately another message showed so wording

  "Prepairing for the repair of some/automatic '.

  I waited about 1:30 hours and nothing happened. No Progressive bar (which Microsoft shows everywhere). So I sat there like a statue. I didn't know what was going on inside. No message, full of persentage nothing.

  Yet once restarted, it with my dvd pro Win 8. And selected repair my computer from the installation screen.

  It is said

  Diagnosis of your computer... Two hours went by. Suddenly the message changed to check for disk errors. I waited for more than 3 hours. Nothing happened. So I closed the computer.

  I am really frustrated because I have important data inside. I need to start it up in any way.

  Please, help me to enforce. I do not have backup.

  Hi Baro

  Happy news. I got it to work. Yesterday, I have issued an order to repair the MBR (bootrec.exe /fixmbr). After that I again checked with no luck. I unplugged my hp printer. Removed all the software I installed by inserting my victory 8 dvd and boot from dvd and then using evil taken view option. When I start the computer it goes immediately to "auto repair mode. So I decided to leave it as such to see what will happen. After 3 hours the mode changed to mode "Diagnostics of your computer".

  After that the 3rd hour, it changed to "Disk error checking" Mode  I left and went to sleep.

  I woke around 02:30 and checked state. Identical to the latest fashion. The benben8484 came after 45 minutes. When I came back, he showed my login screen. Immediately, I've connected and then turn off the computer correctly. Today, I'll check and start to reinstall what I removed.

  Sort of thank God it's fine now.

  I tried to go back my memories as I was able to pin point the exact reason, why this happened.

  Please, do not try things.

  1 if please do not connect your mobile phone then turn on the computer. Put first on the PC and after login, connect you Mobile.

  2. do not try to stop updates (Windows updates).

  3. do not stop between updates.

  Windows 8 takes more time for average error Windows 7. In my case, it took 7 hours.

  Thank you once again

  Sen

• How to copy windows XP pro update fills

  I want to save a copy of windows, all files updates which is for my PC, for after stop of the windows xp pro in favor Web site.

  How can I do this because I have hardware that is not supported in any newer OS.

  Hello

  For benefits during the different phases, you can open the link below and choose "Support Life Cycle policy" on the left side.

  http://support.Microsoft.com/lifecycle

  For reference

  http://support.Microsoft.com/lifecycle/?ln=en-GB&C2=1173

  Integrate the end of Support Date	Extended Support end date	Service Pack Support end date
  31/12/2001	14/04/2009	04/08/2014

  If you reinstall Windows until the end of cycle, you will get the benefit as shown in the link. The best way is to download and save Service packs for XP that will cover more updates, or you can make a note of the update currently installed in the computer and manually download as backup.

• IEEE 1284 PARALLEL USB driver in Windows XP Pro SP3 problem

  I have a max system pc which has no parallel printer port and is designed to run Windows 7 or Windows XP pro. I installed XP pro. I had bought the wrong cable (USB to DB25) and inadvertently installed a driver for it that was only compatible with Win98 or me. Now, I have the right parallel to USB cable and when XP detects and tries to install it, it stands automatically and asks this Win98 / ME .inf file that does not work. Technical Support for the cable has told me to update the USB Mainboard drivers, however, is not available for download from the manufacturer of the motherboard. I think that there is something stuck in the registry that keeps pointing to this file .inf that is not valid. I want to know how to update or delete it the register so I can get a clean reinstall the driver for the IEEE 1284 cable. Thanks in advance

  See if you can see what he listed as a hidden device when its not connected.

  Panel system and launch of open control. Click the Advanced tab. Click the environment variables button. Click the new button at the top under user variables. In the name of the variable type: devmgr_show_nonpresent_devices. In variable value, type 1. Click OK, click OK again.

  Click on the Hardware tab, click the Device Manager button. Click view on the top menu and select "Show hidden devices" in the list.

  Now expand the + box next to Ports (COM & LPT). If you can see the device listed there, right-click on it and select Delete.

  If you were able to remove it from this way, you should be able to plug the new peripheral and prompted for the drivers in the usual way.

• Windows 8 Pro update product key cannot be used to activate Windows after an installed cleaning

  Hi guys,.

  I bought a Windows 8 Pro Upgrade and received the product key I used to download and run a clean install to my laptop using a USB Flash drive (format my HD then install). But now, in my new installed Windows 8, I can't use this product key to activate Windows as it says that the key is for an upgrade, not a clean install. I was not aware of this problem when I did the clean install. So, how can I activate my Windows now?

  It! s a upgrade, you need to UPGRADE your existing system. New installation is not supported. I'm sorry.

  This is simply not true.

  If you had a hardware problem and you will need to re - install Windows 8, you can do this by using installation media that the wizard allows you to create (or installation media that you ordered, if you chose to order discs).

  If you don't have installation media, you can re - install your older version of Windows and rerun the upgrade.

  Whatever it is, you will need the product key you received when you paid for Windows 8. If you choose to do a clean install of Windows 8 from the installation media, you will also need to call Customer Service for help activating your copy of Windows.

  Kind regards

  Ben Herila

  Program Manager | Windows Server

• Windows 8 pro update - we cannot connect

  Try to upgrade to windows 8 pro to windows 7.  Have you tried the troubleshooting and still nothing.  Spent 2.5 hours on the phone with tier 2 support last night and they did everything that I had already tried and nothing.  I tried the following

  sfc/scannow

  chk

  Msconfig (clean boot)

  safe mode

  deleted drivers/apps that show not compatible

  different internet connections (fully functional for the web and other app downloads)

  This is updated to windows (including patches and fixit)

  proxy commands

  Remove the Web installation

  Rename the Web install

  Different user profile

  etc.

  etc.

  etc.

  Here is the log file

  2012-10-29 11:57:19, ConX::Setup:Web:COnlineStore:GetOfferForEdition CONX error: failure! [Error: 0x803d0013.]
  2012-10-29 11:57:19, ConX::Setup:Web:COnlineStore:GetOfferForEditionAsync CONX error: failure! [Error: 0x803d0013]
  2012-10-29 11:57:19, ConX::Setup:Web:CWizardPageReviewLateEntryPresenter:OnShow CONX error: failure of the API online store [error: 0x803d0013.]
  2012-10-29 12:06:12, ConX::Setup:Web:COnlineStore:GetOfferForEdition CONX error: failure! [Error: 0x803d0013.]
  2012-10-29 12:06:12, ConX::Setup:Web:COnlineStore:GetOfferForEditionAsync CONX error: failure! [Error: 0x803d0013]
  2012-10-29 12:06:12, ConX::Setup:Web:CWizardPageReviewLateEntryPresenter:OnShow CONX error: failure of the API online store [error: 0x803d0013.]
  2012-10-29 12:54:25, ConX::Setup:Web:COnlineStore:GetOfferForEdition CONX error: failure! [Error: 0x803d0013.]
  2012-10-29 12:54:25, ConX::Setup:Web:COnlineStore:GetOfferForEditionAsync CONX error: failure! [Error: 0x803d0013]
  2012-10-29 12:54:25, ConX::Setup:Web:CWizardPageReviewLateEntryPresenter:OnShow CONX error: failure of the API online store [error: 0x803d0013.]
  2012-10-29 12:59:15, ConX::Setup:Web:COnlineStore:GetOfferForEdition CONX error: failure! [Error: 0x803d0013.]
  2012-10-29 12:59:15, ConX::Setup:Web:COnlineStore:GetOfferForEditionAsync CONX error: failure! [Error: 0x803d0013]
  2012-10-29 12:59:15, ConX::Setup:Web:CWizardPageReviewLateEntryPresenter:OnShow CONX error: failure of the API online store [error: 0x803d0013.]
  2012-10-29 13:15:12, ConX::Setup:Web:COnlineStore:GetOfferForEdition CONX error: failure! [Error: 0x803d0013.]
  2012-10-29 13:15:12, ConX::Setup:Web:COnlineStore:GetOfferForEditionAsync CONX error: failure! [Error: 0x803d0013]
  2012-10-29 13:15:12, ConX::Setup:Web:CWizardPageReviewLateEntryPresenter:OnShow CONX error: failure of the API online store [error: 0x803d0013.]
  2012-10-29 13:32:09, ConX::Setup:Web:COnlineStore:GetOfferForEdition CONX error: failure! [Error: 0x803d0013.]
  2012-10-29 13:32:09, ConX::Setup:Web:COnlineStore:GetOfferForEditionAsync CONX error: failure! [Error: 0x803d0013]
  2012-10-29 13:32:09, ConX::Setup:Web:CWizardPageReviewLateEntryPresenter:OnShow CONX error: failure of the API online store [error: 0x803d0013.]

  I tried to download the installation file and runnning the web he asks key, then it says please wait while we're online and get stuff

  and then said: we cannot connect you right now

  Get exactly the same thing, even using level 2 mouth gaping for 2 hours. He said he spoke to Washington from Microsoft? and they said it was due to the amount of people trying to upgrad, said would call me back tomorrow to continue the matter. I don't hold much hope but to keep up-to-date.

  Hello world

  I asked around and for the error:

  "We cannot connect you right now. Check your internet connection and try again.

  I think that you need an agent that specializes in ESD.   May be a few people who receive this fault contract this team and let us know how it goes?

  ESD team contacts list is located here:

  http://support.Microsoft.com/GP/ESD-support-phone-numbers

  Bill

• Windows 8 Pro: email problems, files not shown.

  I installed Windows 8 Pro on my PC and laptop.  I use a yahoo address.  Problem 1: When I enter the Mail App on the start screen and the e-mail page there is a difference between the "applications" available at the bottom of the screen when the right button of the mouse is used.  On the PC only four options, two on the left (Sync & Pin at the beginning) and two on the right (move the brand & unread).  When the same thing is done on the Laptopthere are nine options available, four options on the left (pine Sync, folder, start Options & Select All) as well as five options on the right (Print, flag, Junk, Move & mark as unread).  How do all these options to display on the PC as well?  Problem 2: on the laptop, in the upper left of the Yahoo screen appears on the screen and at the top right, there are three options (new (+), return to sender (answer) & clear).  Next to the sign of Yahoo, overcoming the messages, there are two available options (all & the icon 'search').   On the PC the Yahoo (upper-left) and three options at the top right is available, but there is no option available above messages: I can not select all or search because there is nothing is not displayed.  Messages goes all the way to the top.

  Problem 3: I want to send something that seems impossible to select the entire message.  I can not also transmit images.  How can I select the full message and transfer ALL the content?  This problem is on the PC and the laptop.  Fact: I had no problem with the good old XP and wonder why I spent the money to "upgrade"?  It seems also impossible to talk to any human being when you need help, a very frustrating situation.  Your help will be appreciated.  Kind regards.  Brandie.

  Hello

  This problem may occur if the mail application is not properly synchronized.

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

• Windows 8 pro update failure Code 80070BC9

  I show no update Windows since July 2013.  Whenever I have check I get a download of update, but during the installation I get 'impossible '. Code: 80070BC9 and others. No updates installed after KB2864629. This time, it's KB2871777 and KB2871690.   KB2871690 download and install 'Successful' but after reboot back to the previous setting.  The version is Windows 8 Pro 64 Bit. I can't upgrade to windows Pro 8.1 until the windows updates are installed.

  If you uninstall KB2864629, KB2862073 andKB2855336), [1] restart twice & then do not install them again once the behaviour continues?

  Restoration/refresh/reset page applies to Win8 & Win8.1.

  Because you are apparently missing a value of 5 or 6 months of security updates (as well as the updated prerequisite Win8.1), you are the best solution at this point is a Reset ("all delete and reinstall Windows").

  Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  ======================================================
  [1] KB2851284 is a update or a section of the play.