Windows 7 - remove the AMD64 and I386 folders

Similar Questions

• Why windows 7 adds the locks and new folders I create?

  Hi all,

  This is the situation that I am and I'm all out of ideas.  Whenever I create a new folder on my desktop a lock icon with the folder icon.  Then I go to the Security tab and under the entry for group names or the user domain is listed. SYSTEM, my own profile name and finally to account Unknown(S-1-5-5-0-xxxxx) with a red question mark icon.  I am able to delete the account unknown entry, but then when I create a new folder lock still appears along the unknown account entry in the Security tab.  Why we do this? And how could solve this problem?

  For the person who has this problem, I thought of her.  This has to do with the permissions that are allowed for your parent folder that the new folders are created in.  For example, if you experience this issue when you create new folders on your desktop, then you check the permissions in the desktop folder.

  In my case it was the desktop folder, so that I did this, I opened windows Explorer, went to the Security tab of the desktop folder and saw that none of my users or groups had no authorization for the office.  That's why when I created a new folder of the user account unknown would be in the region of groups or users from the Security tab.

  To remedy this, I did the following:

  • Go to the Security tab of the offices.
  • Clicked on edit and gave full control to SYSTEM, administrators, and my two users that I created.
  • Click apply then OK to close.

  The lock on the new folder I created earlier was gone.

  I'm not sure how my permission I messed up, but I think it had something to do with me after trying to move the desktop folder of the standard on the Office of the administrator user, and I was logged into the Admin account.  I tried to recreate it, but I was unable to.  Anyway now fixed it.

• I moved folders amd64 and i386 to another partition, later deleted them there and now have copies of 0 bytes in the trash who refuse to go away or to restore.

  I found the folders containing these subfolders on my C:\ drive and thought I would move to another partition, because they are not referenced in the registry.  Years later, I deleted those same files, then erased and then removed again from the trash.

  But they refuse to go away... remaining as with attrib C 0 byte files.  Does not restore.  Trash has no security tab by which I could take control of these nuisances, and Unlocker does not work.

  Any way to rebuild the trash or otherwise to clean?  The files remain an embarrassing reminder of my foolishness, but otherwise my system is always very good.

  See if this sounds like your situation and react accordingly:

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is a good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• "Symantec service framework stopped working" 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is removed from the privacy of available'Email

  "Symantec service framework stopped working" 'a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is not available"

  Favorite

  E-mail address is removed from the privacy *.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080917103626EN&LG=en&SEG=HHO&CT=us&PVID=nis_2009&selected_nav=5

  http://Service1.Symantec.com/support/Norton360.nsf/0/a5ae667bcb41502b6525729f002036b2?OpenDocument

  It's a Symantec/Norton problem; read the links above.

  Contact Norton Support:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  See you soon.

  .

  Mick Murphy - Microsoft partner

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• How can I remove the footer and header view print?

  The function "file > config page" does not display the options to remove the footer and page header.

  This has happened

  Each time Firefox opened

  == I try to print

  If you want to remove the header or footer at all times (there is no user interface as in the layout under Windows or easily change) in Firefox under Linux, you can erase the preferences different values to get rid of both of them.

  Type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.

  Filter = header
  Each of these prefs right click and select Edit, then backspace or use delete to erase the characters - and then click OK.

  Repeat the same for the footer.

• Media Center has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Computer: Vista Home Edition Premium, SP2

  My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.

  This is the error in the event log

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2011-08-09 16:49:45
  Event ID: 3084
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: rb - CCP
  Description:
  Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available.  .

  The event XML:
  
   
     
      3084
      0
      2
      3
      0
      0 x 80000000000000
     
      380048
     
     
      Application
      RB - CCP
     
   
   
     
     
      Search.MediaCenterHandler.1
      A server error occurred. Verify that the server is available.
   
  

  Hello

  I suggest you follow the methods and check if it helps.

  Follow the steps below and check if it helps.

  (a) exit any running instance of Windows Media Center.

  (b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:

  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB

  To remove the file, follow these steps:

  i. Click Start and then click Run.

  II. in the Open box, type run and then click OK

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.

  IV. in the details, click pane right mediacenterdatastore.db and then click on remove.

  c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.

  (c) start Windows Media Center.

  I hope this helps.

• I get a pop up window that says: "a problem causing the stoppage of work of the program. Windows will close the program and notify you if a solution is available.

  Original title: window problem

  How can I get rid of window that States "causing problem program to stop working. Windows will close the program and notify you if a solution is available"when he was actually without any problem?

  I do not have this message before I had another and removed advice Advisor total care and the problem resolved. Thank you for taking the time to help.

  Al Ashton

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error message "Windows cannot remove the password. "Password policy or account require the account has a password.

  original title: remove administrator account or remove password

  I am trying to remove a user administrator account or remove the password and I get the error message below. Also, I can't delete the password as an administrator in Windows 7 32 bit or delete the account. I get this error message "Windows cannot remove the password. "Password policy or account require the account has a password. I tried to create another admin account, but it does however not take away the password or delete the account else

  Someone has put a policy on your machine to enforce some rules for passwords. Best is to ask that person to change these rules for you. Alternatively, you can run gpedit.msc, then follow this path to edit yourself: Local computer policy / Computer Configuration / Windows settings / security settings / account policy / password policy.

  Note also that:
  -You cannot delete the built-in Administrator account.
  -Administrator with a blank password accounts is a big security risk.

• Security How can I remove the copy and paste the files I used?

  Security How can I remove the copy and paste the files I used?

  I can't get rid of all the e-mail addresses I have copied and pasted.  No matter what I will always appear if I hit paste again.  This is a shared computer and I would rather not have my copy and paste the files stored on the computer, after that I quit.

  Thank you

  Hi Ron,

  You can copy or move information (for example, text and pictures) between files and programs using temporary storage called the Clipboard. The Clipboard is not visible, so even if you use it to copy and paste information, you never actually see the Clipboard when you do this.

  The Clipboard contains a block of information at a time. Whenever you copy information to the Clipboard, the old contents of the Clipboard is replaced by the new information.

  When you shut down the computer everything is stuck in the memory of the Clipboard is cleared.

  Please click the below mentioned link to get an overview of the clip board memory.

  http://Windows.Microsoft.com/en-in/Windows7/copy-information-between-files

  Answer please if you have any questions.

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• Cannot connect to windows to receive the updates and run windows Defender

  I am more able to receive windows updates or run my windows on my PC Defender. I had some malware problems that I removed, but

  After you have cleaned the malware I notice my windows Defender, windows update didn't work more and my printer software has been removed.

  If anyone can give some suggestions I would greatly appreciate the help and advice.

  Thank you

  Hi Byron,

  Thanks for posting your query in Microsoft Community.

  I do not understand that you are unable to connect to Windows to receive the updates and run Windows Defender and I'll be happy to answer your query.

  This could be due to any dispute of third party software or system files missing or corrupt. We will try the following methods and check.

  Method 1: Put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  From now on, try the methods above and let us know the result.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• can I remove the drm and save them in pdf format

  Hi I just got a book on google and then discovered that I need to install digital adobe to be able to read it offline. I use linux and now I can not read the book offline, unless I use a windows box... uh boring. Can I remove the drm, and save the book in pdf format, so I can read it on my computer laptop linux? Any help appreciated

  Found something... How to remove the DRM with Calibre ebook | TechRadar

  Need to recover the file with adobe waste, then install calibre so then install an addin for caliber to be able to open DRM shit and then save it as a pdf DRM crap. What a pain in the anus when I lost a lot of money to buy the book. That's why people just download the dubious in the first place? Now I can read the book I brought legit on my portable linux using calibre.