Windows 7 server IP versus \\server problem

Similar Questions

• Windows 2003 - server problem

  When I try to connect my windows 2003 Server service, it gives below error:

  12029 - unknown error.

  On the internet I can find that 12029 - could not establish a connection to the server.

  Legacy code is written in VB6.

  Code:

  objXmlHttp.open "POST", modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "WSURL"), False
  objXmlHttp.setRequestHeader "Content-Type", "application/x-www-formulaires-urlencoded.
  objXmlHttp.setRequestHeader 'Permission', modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "Release")
  mfurlxml = "SERVICE = VALIDATE & DATA =" & URLEncode (objDom.xml)
  "objXmlHttp.send"FUNCTION = VALIDATE & DATA ="& URLEncode (objDom.xml)
  objXmlHttp.send (mfurlxml)

  I tried all ways below to make it work. Yet my request does not reach the server. Can someone help me please?

  1 has changed the default Web site to use IP addresses (all unassigned)

  2. clear firewall problem

  3. not controlled all three boxes under Internet options-> connections-> lan settings

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 2008 server problem

  Windows 2008 Server starts providing DHCP itself after you enable the DNS suffix. How to stop the same?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• A purple screen of death (.. .exception 14 to the world...) with Vsphere 5.5 and Windows 2012R2 Server (problem solved)

  Hello

  I think it is good to add here...

  I started now to migrate my server under Windows Server R2 2012. The virtual environment is vSphere 5.5 HP DL380G7 servers.

  Today, I have solved a hard crash of the host server after you have added a server Win2012R2. The symptoms are CMTF (purple screen of death) to the host (I was pleased that I have disabled the new customer HA; that would be a blow my other hosts).

  Basic message was "...". exception 14 worldwide xxxx... ».

  I solved it very simple by changing the E1000 to VMXNET3 virtual network card. For me, it looks like a bug to develop by VMware in the next versions. For now it works.

  I hope this information helps you!

  Good luck!

  See this article.

  VMware KB: ESXi 5.x host undergoes a purple diagnosis with errors E1000PollRxRing and E1000DevRx screen

  Frank

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Home Server + Config IP/LAN WRT54G problems

  Hello

  I tried to fix this for days now, and I feel more I read on questions from other people who appear to be similar (at the beginning), I realize that I don't know even where to start... [: Confused:]

  What I know:

  I can't access my Windows Home Server from outside my home network. Whenever I have try and enter the domain name, setting Page of the WRT54G (identical to display when you enter http://192.168.1.1. inside my network) is displayed. Seems I found a way to configure my router remotely - but it's really not what I want... I rather like to access my home server, but it does not work. My LAN, I don't have a problem to connect to my server via remote desktop, but not from outside.

  I'm sure it's a (simple?) Number IP/LAN, but I just don't know how to solve. I know that something is obviously wrong with the IP addresses, but I don't know which ones to change without messing up my network, server, router etc...

  My presentation of Setup/settings:

  1.) WRT54G (v6) installed with latest firmware. Active DHCP.

  2.) HP MediaSmart Server (running Windows Home Server 2003) is configured with a static IP address > TZO domain name.

  3.) WRT54G Port Forwarding: all need ports (80, 443, 444, 4125, 3389) passed on to the Home Server (192.168.1.222)

  What strikes me (as shown in the tab "Status" of WRT54G):

  The IP address of the router is the same as my domain TZO address... is that supposed to be like that? -Need help, Pleaseeeeee!

  Q1: How can I access my home server from outside my network without pulling up the configuration of my router settings?

  Q1: which of my IP addresses & settings need to be changed... and where?

  Any help is appreciated...  Many thanks in advance!

  Armin

  Simply turn off remote access of configuration on the router or change the port that it sits on.

  The problem is that the web INTERFACE of configuration for the wrt54g is on port 80, so when you try to access port 80 (internet) outside it goes directly to the configuration UI instead of the server on port 80.

  Don't ask me where it is that I do not run firmware factory on wrt54g nmy.

  Concerning

  Fred

• Installation of WINDOWS HOME SERVER on a server that I just built. Driver problems.

  I'll use my old office of 3 years of Dell (Inspiron 531) as a server. I will be installing WINDOWS HOME SERVER software on this subject. The vehicle currently has Vista Home Premium on it. Someone I know said I could have driver problems. Is this true? If it is that drivers enough to be responsible and how to see their loading? Chris Mah

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  Kindly repost your question in the above Windows Home Server Forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Live Mail send any emails. "Your server has terminated suddenly the connection. The possible causes for this include server problems. »

  original title: live mail not sending

  My windows live mail 7 stopped sending a reason any.  It has worked very well.  It receives mail ok.

  Whenever I try to send an email I get the following error

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Topic 'task on cognition.
  Server: 'smtp.tiscali.co.uk '.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  Any help appreciated.

  It can be something as simple as turning off email in your anti-virus program that is unnecessary and can cause this. However, if it does not, ask the experts in this forum. Here, few people use this e-mail program.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired. "Please wait a few minutes by trying again.

  Original title: store Windows and Microsoft Services does not

  I tried for awhile to update to Windows 8.1, and whenever I open the Windows store, I get the following message:

  "We could not connect to the Bank.  This could have happened due to a server problem or network connection has expired.  Please wait a few minutes by try again. »

  I looked through a large number of subjects and lived simple solutions, like check that the time is correctly synchronized and clear the memory cache to store.

  Just today, I found another solution posted, to make my computer trusts.  To do this, I had to connect my local account to my microsoft account, I tried to do, only to be met with the following message:

  "Sorry, we could not connect to the Microsoft services right now.  If the problem persists, look for "referee" in the start screen. »

  I did the research you suggested, and nothing came.  When I watched this show online, I found the idea of creating a new user account, which has been received with the same question.  The suggestion of other involved running a diagnostic tool for Microsoft account who investigated the issue, which has turned a few 'problems found', namely an Unfixed 'Problems with the strategy of Microsoft account' and a Detected "Rootcauses found and created newspapers", but this is not what that means, or how to solve.

  In addition, some of the suggested solutions were an antivirus program, but I do not have a third part of the installed antivirus program.

  Any help is appreciated, because I really want to solve this problem.

  I had this problem too. Here is how I fixed it in about 3 seconds.

  1.) by scanning in the right and type "WSReset.exe" (without the quotes) in the search bar.

  2.) click on the application that appears. It will look like a Windows Store icon.

  BAM... done. I hope this helps!

• Error Windows Store"we were not able to connect to the Bank. This could have happened due to a server problem or network connection has expired

  Original title: Store of Windows 8

  I got the message to upgrade to windows 8.1. When click to upgrade it shows following message.

  "We could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please, wait a few minutes and try again"

  The error message appeared as early as February 2014, so I can't update windows 8.1 or go to store.

  Hi Rikas,

  You might face this problem if the proxy connections are enabled.  Cache clearing Windows Store is also known to solve the problem.

  Kindly, follow these methods and check if that helps.

  Method 1: Follow these steps to disable the proxy settings.

  a. open Internet Explorer to the desktop.

  "(b) click on the" "Tools button", then click on "Internet Options".

  "c. click on the" "connections ' tab and then click on"parameters LAN '.

  d. uncheck use 'Proxy Server '. .

  "e. click on" "Apply" and "okay ' to save the changes.

  In addition, run the troubleshooter app and check.

  This tool can automatically identify and fix some issues with the store.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  
  Method 2:
  Reset Windows store the cache and check if that helps.

  a. press on 'Windows and R ' key to open the Run dialog box. "

  b. Type "'WSReset.exe ' and press enter."

  In addition, follow the suggestions of this blog.
  Unable to connect to the Windows store (Windows, 8.1, 8, RT and Pro)

  http://blogs.technet.com/b/dennis_schnell/archive/2013/10/26/cannot-connect-to-Windows-store-Windows-8-1-8-RT-and-Pro.aspx

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."

• Problem with Windows Home Server 2011 licens?

  I recently bought a custom, compatible material to try the beta version of Windows Home Server 2011 (Vail), and now I want to upgrade to the full version. How do I proceed because there is only an OEM version of the operating system?

  Please repost your request in the good Forum Windows Home Server.  Thank you!

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• PX1237E HARD drive - 1 40 disconnects from the "Windows 2000 Server".

  I have 3 USB HARD disk, 2 are the Toshiba model named, and the other is a Seagate HD on a USB enclosure.

  I put the tree on a server with "200 Windows server" with Sp4 to make copies of security during the night. When I connect I have 3 new units (E, F & G), but on some instant overnight, 2 hard drives of Toshibas disconnect units F and G and does not copy because there is no such thing as units

  I use two disks of password.
  Any problem with windows 200 server, because on the product page only mentioned the windows xp pro and home, but say nothing about windows server.
  Any idea on the problem?

  Thank you

  Hello

  so if you have used their password, then this might be the reason why disk´s disconnected. Maybe the operating system simply does not support.
  Remove the password and try to copy the files again to your server.

  Greetings