Windows 7 - the Audio Service is not running

Similar Questions

• Problems with error Windows Audio and Control Panel "one or more of the audio service is not running.

  I'm a bit of a technophobe, but I'll try to explain my problem, I got better.  I recently had a problem with Windows 8 and refreshed my system.  After refreshing, I installed AVG Anti-virus and that's where my problems really started.  After installing AVG I have no sound and my control panel usually pop up.  The box is displayed but there is nothing in it and it sorts just of sticks, frozen.  I tried the fixes recommended to fix my sound. The speaker in my taskbar icon has a red x on it and when I try to open it it goes right to the problem-solving mode, then comes up with "one or more of the audio service is not running.  When I try "run services.msc' and try to start Windows Audio through Services I get error 0x800706cc.  I tried to uninstall AVG and reboot, but it did make a difference.  Please help, this leads me to the madness now.  Nothing I try seems to work!

  Installation of AVG is when the problems started, I would start by undoing that.  Since the normal uninstall did not help, use system restore to return to a work situation.  Check here and use the #1 option.

• HP Pavilion Notebook PC g7 - The Audio Service is not running

  I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

  HP Pavilion Notebook PC g7

  #ABA product number A6Z29UA

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• When I turn on my laptop and it does not have the startup sound, video, or audio won't work.sound icon shows the audio service is not running.

  Hello
  I'm not a problem with my his laptop. I don't get all the sounds, even start-up noise. the audio icon indicates that the audio service is not running.when I try you trouble shoot the problem. I get the message the windows audio and generator of endpoint audio windows needs to run correctly for audio work for sound. At least one of the device does not work correctly.
  waiting for answer

  Sincerely

  Hello

  Did you of recent changes to the computer that caused the problem?

  What is the brand and model of the computer?

  What issues you're having with videos?

  To solve the problem, see these articles:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  It will be useful.

• No sound. Error "The Audio Service is not running"

  The sound stopped working on my Dell XPS M1210. I get the message "The Audio Service is not running" and the resolution of problems can't fix. Any suggestions?

  Hello

  See if that helps you.

  Do to Dell drivers and download page > equip your Dell model number > follow the prompts to find the drivers for your operating system > Search Audio drivers > download and install.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  See you soon.

• Any solution for "The Audio Service is not running"?

  Searching high and low on the Internet, I can't find a solution to the difficulty of the notification in the status bar:
  "The Audio Service is not working" even if my audio works.  I find that this problem exists for many people using Win7.

  I just found this link that Microsoft provided, (which means that it is indeed a problem acknowledged by Microsoft), but without any real fix.
  http://support.Microsoft.com/kb/2011656

  Hey, someone from Microsoft can we give a hint he will never be a solution to this?

  Thank you.

  Reach:

  Control Panel > administrative tools > view local Services
  It's the "service" window, it lists all system services. Find "Windows Audio", NOT "Windows Audio Endpoint Builder.
  [just click on any service, then press the letter 'W' on your keyboard, will need you the services starting with the letter 'w']
  Right-click on the "Windows Audio" service and choose "Properties".
  You will see 4 tabs, click on the last one, titled "dependencies".
  In this tab, you will see the box "this service depends on the following system components", it displays 3 services
  Next to each service, there is a "+" icon, click on it to expand the list. 2nd service 2 child services, the 3rd service will be 1 serving children.
  Now make sure that all 6 services (3-hand, 3 children) have the status of "started" in the "Services" window you opened earlier
  Most propably you will find one of these services don't work, just start all the, then try to start the service "Windows Audio" in the tab "general".
  That's all

• The audio service is not running

  Today, I turned on my laptop to discover that the sound did not work. I tried updating the drivers, restart the computer and try the default of repair tool, but nothing has worked so far. Any ideas?

  I have Lenovo Z50

  Thank you

  Hello! I recently solved this problem on my pc. AVG detected malware in the last patch of Win8.

  However, it is not a malware and relates to your audio services.

  Start AVG, click history, and then click quarantine.

  Click on the item with the EXACT time that you started windows was last updated, NOT get back anything else. Worked for me.

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• Windows Firewall settings cannot be displayed because the associated service is not running

  I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.

  Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
  is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
  than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
  you are, of course, that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Base filtering engine service, I learn by Norton that the windows base filtering engine service is not running on our laptop.

  I was informed by Norton that the windows base filtering engine service is not running on our laptop.

  And I need to notifify you.

  The filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications.

  Firewall Windows depends on BFE works correctly.

  To find out if BFE is running on your system, click Start, and then type this command:

  cmd /k sc qc bfe

  Press {ENTER}

  If you receive the following error:

  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service.

  It is generally the work of one or more malicious software. See this address for the explanation and information on how to restore the missing service:

  The motor filter (BFE) basic service is missing: why it is happening and how to restore:
  http://www.hageltech.com/blog/2012/02/07/base-filtering-engine-problems.html

  or you can download and apply the patch from BFE (#11) of this page service registry:

  Register various fixes for Windows 7/XP/Vista - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• audio service is not running

  I use a HP Pavilion dv4 laptop, product #WA683UA #ABA. There is a red X next to the "speaker" icon. When I move my mouse over the "speaker" icon, I saw the following message, "the audio service does not work."  How to fix this?

  Hello

  Hold down the Windows key and press R.  In the run box, type services.msc and press ENTER,

  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• Update for Windows vista 64-bit service is not running. I tried to restart. How to start or load update service? I explorer 8.

  Explorer 8

  I have Nortorn 360 installed and running.

  Windows Vista 64-bit

  So far the service is not running. I tried to restart, Fix.

  I deleted the update log I saw another thread, the fix o.

  Hello

  1 did you changes to the computer prior to this problem?
  2. you receive an error message?
  3. what solution did you try?
  4. What are the troubleshooting steps you have tried?
   
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can try to temporarily disable anti-virus installed on your computer and check.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 3:
  You can see the following link.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  For more information about how to back up and restore the registry, follow the steps from the following link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  It will be useful.

• Windows 7 SP1 bits service is not running.

  I got my lenovo T400 a year (bought previously) and the gate opener 200 GB sea was starting to show signs of failure. I decided to replace the drive with an ssd 240 GB Kingston and I did a new install of windows 7 ultimate. and it worked fine for a few days. It downloads all the necessary drivers and updates. then manually install sp1 and ran wusuoffline he get windows to 532 speed windows installation updates. and after windows installed 30 or so other updates. and ran very well for two weeks. I turned it on and I did things and the basics of Microsoft Security said it could not complete its update if windows update service. I started the update of windows, and he had the red shield as one of my friends put it. and I clicked on search for updates. and he said: 'WINDOWS CANNOT CHECK THE UPDATES, because WHAT THE SERVICE IS NOT running. "YOU MAY NEED TO RESTART YOU COMPUTER. I reboot and run the troubleshooting of windows. and it gave me an error 0x8E5E0247, and that did not help. and I reset tool of windows updates. No deletion software distribution. Nope. and ran to the windows https://support.microsoft.com/en-us/kb/2730071 repair firm. and it still didn't work. so I whent in command prompt and I ran and received a system error 5 access denied. (and I would have ran windows 10 but my dose of video driver do not work in the ten windows environment).

  I need help this is way over my head.

  and this laptop is use for school so there is not another option for me up to what a few weeks or more

  If you can, make a backup of your system, or at least your data important (if there is) first.

  1 it seems that you have seen this article, but its worth a try again after the first reboot of your PC - https://support.microsoft.com/en-us/kb/2730071

  In accordance with the above article, if you look in the "services" window, is the "Background Intelligent Transfer Service" listed and running? If his try listed but not running, starting on the left by clicking to select and right click then click on START. It starts then? If it is not in the list, something's up, see below. NOTE: You may be in an ADMINISTRATOR account in order to start or stop a service.

  If his list but still does not start, then try - https://support.microsoft.com/en-us/kb/971058 and then see if you can run it.

  2 BITS if is not listed, then open MSE and see if you can update from the tab [UPDATE] force? If this fails, then go here and download the latest definition files for MSE to your PC and see if you can install manually. If you install them, now run a scan then full to see if it detects malicious software. Finally, download, install, update and run a scan complete with (free) Malwarebytes. Keep it free, no need to start testing. This analysis found a malware?

  If each scan detects and removes malicious software, then repeat the '2730071' and then '971058' above.

  3 if BIT is missing from the list of services, and the above do not restore, then check out http://www.winhelponline.com/blog/misc-registry-fixes-for-windows-10-7-8-xp-vista/

  Number 14.

• HP G71-449WM. Windows 7 64-bit. "The audio service does not work.

  I downloaded all the updates that I can find anywhere. My roommate has deletion of things on my laptop for 'performance' and now I have no sound. I go to my device manager in the computer and it is says my IDT HD audio CODEC works correctly. And my Intel(r) High Definition Audio HDMI does not work correctly. What should I do to get his new? The the small speaker in the far right of the task bar icon has an X on it, as she was mute. BUT it's not. Help? /

  Hello

  Open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all displayed as status = started and the Startup Type = automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  Kind regards

  DP - K