Windows 7 Startup logo does not completely load

I know this is something relatively minor and without important, but that it concerns me, is because there could be other underlying factors may in time affect the performance.

I am running Windows 7 Home Premium 64-bit.  During the sΘquence of dΘmarrage the colorful logo in sight into pieces and then joined to form the glowing logo of Microsoft.  Well, on my instalation stops loading logo as parts are in sight and the DSI logo has never done, instead, the computer just starts.

I feel a little silly for bringing this place actually, because who could complain about a boot even faster?  However, I would be interested to hear if someone else observed this, and even if there is a cure?

Mark

Hello Mark,

No problem raise any problem. First, a question, you have a solid state (SSD) drive? If so, its probably beyond the ability of the screen draw the logo before its ready to move on to the next operation.

Second question: is any loading correctly / functioning normally? If so, I wouldn't worry on this subject. It looks like a case of the computer moving more quickly than the screen can draw. Things to check specifically include the Device Manager (Control Panel |) Device Manager); is there yellow triangles with exclamation points indicating? All devices show that they loaded correctly?

If they are, even once, I wouldn't worry on this subject. If they don't, then you need to understand what the problem is. Go to the individual yellow triangles and click on those to read error messages.

Hope this helps you. Please post with how you fare.

Kind regards

BearPup

Tags: Windows

Similar Questions

  • Share of software Flip does not completely load due to not write the script of window installation package

    Part of Flip software does not completely load on windows vista... error message windows package install will not write script to complete the installation

    Hello hedubang,

    Thanks for posting on the Microsoft answers Forum.

    I suggest to try the safe mode and see if you can install it in safe mode or if there is a conflict.

    Start the program in safe mode

    1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.

    2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

    3 log on to Windows by using the administrator account or any account of a user with administrator privileges.

    Note: In Safe Mode, your display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return the system to Normal mode, we can simply restart the computer.

    To determine if the problem that occurs with the program is caused by another program that is running in the background, we recommend that you restart the computer in safe mode and then test the program. If the program runs correctly in safe mode, but does not properly run in normal mode, it probably is another program that is conflicting with the program in question.

    To determine which program is causing a conflict with the program in question, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.

    For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base:

    929135 (http://support.microsoft.com/kb/929135/) how to solve a problem by performing a clean boot in Windows Vista and Windows 7

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Recovery CD does not completely load.

    I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

    Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

  • Facebook: ssl_error_illegal_parameter_alert and does not completely load friends comments

    often we get the above error.
    Games won't load - and now messages from friends are not completely loading.
    I have reset FF - uninstalled - and reloaded. Now, I suffer from withdrawals of Scrabble.
    Help!

    A few other users have reported that the error 10 days ago.

  • Microsoft Office 2007 student does not completely load

    I tried to get my Office 2007 student 60-day trail to load but it get back to me with the message:
    Microsoft Office Student 2007 is not completely load.

    Please can someone tell me what to do thanks

    Hello!

    Here is a user to user of Toshiba forum and I think that it is a problem of Microsoft. Then I would contact Microsoft technical support.
    There may be something wrong with the website or something.

    Good bye

  • WRT54GS V7 Web UI does not completely load

    I already talked to Linksys support and they had to do a hard reset to my router but it does not solve the problem. What is happening is that I'm constantly having to plug and unplug my router to access the Web user interface. I go to the default address 192.168.1.1 and my computer sees the router, but the page does not fully load and shows in the lower right corner, there is an error any (yellow triangle) and it is constantly "waiting for 192.168.1.1 of." Its a system XP with IE8, but I also tried Firefox. Now, if I have access to the router with my laptop, connected wireless, it loads but it takes forever to load up, minutes to load, but it will load.

    If I unplug the router wait 30 seconds or so, plug again, the office gets access again. I don't know what to do at this point. I have another router that I could use, but it never seemed properly open ports and this one seems to do.

    Otherwise, the router works fine. Internet connects, the network looks good... of ideas please?

    Try to update the router to the latest firmware... This might help...

  • my computer starts shows windows xp then restarts around back and does not completely load. Disks hard my are dead? Can not even go in safe mode.

    I have sony vio computer of 8 years, os is xp. It was off and I have to restart and it started in a loop.  Starts booting and then display the "xp" logo and then the screen looks like it lights up then goes back to the start screen, then back to xp logo and it never loads to the bone.  can't go in safe mode or anything.

    Thanks for writing again for me.  This morning I used my f10 key and brought my computer back to original data.  It's all good now.
    Thank you once again.

    Hi falowme57,

    ·         You get the error message?

    ·         What happens when you try to start in safe mode?

    ·         Have you made changes on the computer before this problem?

    Follow these methods.

    Method 1: Disconnect all external devices such as printer, scanner, etc.

    Method 2: Disable the option of automatic restart under advanced boot options.

    http://support.Microsoft.com/kb/307973

    Method 3: See the article.

    http://support.Microsoft.com/kb/314503

    Reply back with the results.

  • Portege Z830 - Windows restart issue - it does not completely restart

    Although I now use 8.1 this problem has occurred with previous versions of Windows.

    When I click on restart, the machine closes as expected, but does not restart completely.
    The flash Toshiba screen does not appear, so that the Windows logo.

    At this point, it crashes and the fan accelerates at full rate, with only the logo on the screen.
    The version of the BIOS is Toshiba 3.90.
    8.1 setting often issues calls for a restart and I would be happy to not always having to do it manually.

    Thanks in advance

    Windows 8.1 does not perform a full stop down by default.
    It access the hybrid stop mode.
    I think that you should just disable this mode in Windows power options
    Maybe it would improve the functionality of the system s notebook.

    Here is a statement that shows you how to do this:
    [Make a full stop in Windows 8 or 8.1 Win | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

  • Google mail does not completely load

    My gmail accounts does not fully open, and no information is displayed.

    I can fix this by disabling the cache.

    Have you also tried to delete cookies?

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • My laptop does not completely load

    I have windows vista and the computer starts up and goes to my homescreen but finish loading so I can't really do anything. I tried to restore but made sure he will not load even that much more. What should I try now?

    Hello

    1. you receive a specific error message?

    2. have you made any changes to the computer prior to this problem?

    Method 1:

    You can try to start the computer in safe mode and check if the computer starts correctly.

    You can see the following link.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:

    You can follow the steps mentioned in the link.

    What to do if Windows does not start correctly

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

    It will be useful.

  • After setting up standard accounts, a few Web sites that should be OK does not completely load on Vista

    I put in place of the standard accounts for my kids to block/monitor, etc.  It blocks certain pages, but the other pages that are OK, the entire page (photos, etc.) does not load.

    * original title - I put in place of the standard accounts for my kids to block/monitor, etc.  It blocks certain pages, but the other pages that are OK, the entire page (pictures, etc.) not no charge.*

    Hi Gary_2525,

    Please tell us what Web browser you are currently using.

    Also, is there a content especially on the Web site that does not charge?  For example, flash player?

    If you use Internet Explorer, see the following article for some possible troubleshooting:

    http://support.Microsoft.com/kb/967897

    I hope this helps!

  • Service Pack 3 does not completely load on Windows XP despite trying Mr. Fixit and clean boot.

    Windows Update says that our computer requires Service Pack 3.  However, after about 70-80 MB or more very slow laborious effort he stops and tells me that download has failed.  The same thing happens when you try to load the update Garmin map that need Net Framework 4 - it's just too hard for her.  I tried mutual aid run Mr Fixit solutions [who proudly says he fixed three different things and installed Powershell for me] and also do a clean boot manually.  They have produced no benefit at all.  Any advice would be welcome.

    First of all, make sure that you have enough free space on your hard drive: http://www.winhelp.us/index.php/windows/enhancing-windows-performance/free-up-disk-space-in-windows.html

    Can download SP3 from http://www.microsoft.com/en-us/download/details.aspx?id=24 and run it.

  • Windows Update win/xp family (KB8982670) does not completely load

    last update 03/04/12 to my PC. NTFramework 3.5 S(P 1 update) Win Server 2003 a Win XP X 86... repeatedly failed. what I'll do... .This is considered a critical update.

    Go to windows update, let it check for updates and see if this update is required.

    Also in the history of update of the review, you can see the updates failed.

    You can click the icon has failed and a box will come up with the error.

    Post here with the error and whether or not this update is always necessary. I checked with the Microsoft update catalog, and I can't find a list for this update.

  • Corrupt Windows files, startup repair does not, blockages when touching a certain area of computer

    Hello, I had a lot of problems with my computer.

    In the past months, if a tap some area of my computer when my computer is turned on, my computer has two answers to this. 1.) screen turning black but computer remaining on. Restart computer 2.). (This area is located to the left of my touchpad / touch area of my computer.)

    If I try to turn on my computer, the three "signs Lock" light on my computer and the icon of a cell tower. The screen remains black. So that my computer to turn back once again, I have to remove the battery for a few seconds and put back in.

    Recently, my computer wanted to check one of my disks for consistency. and on a different file each time, my computer is stuck on this one for a minute or two, then said the file file is unreadable / it is corrupt. It is then placed on the following, and the same thing again and again.

    Another problem is that some programs on my computer take a very long time to load, as well as tabs.

    Also, sometimes when I start my computer, he recommends that I launch startup repair. So I press on enter and it takes me to a screen that says basically that my OS is corrupted / not working properly.

    I tried to restore my computer to an earlier time, and when I do it gives me an error message saying something about Windows files is corrupt and cannot restore my computer to an earlier time before the problem is resolved.

    In the past, my computer had problems of heat fan.

    It also has a battery problem in which it loses its charge very quickly if not connected to a power source.

    I talked to a technician of the answer, and he gave me instructions to/on will my command prompt and try to create a new user account.

    On the first attempt, he told me to type the following: net user "Test" / Add

    The CMD response was that the password did not meet the requirements of the policy.

    Then he told me to try the following: ' user 'Test' net account / add ".

    The response was that «the system is not the specified path»

    Finally he told me to try the following: net user administrator / Active: Yes

    The answer was: "the user name was not found. More help is available by typing NET HELPMSG 2221.

    Technology reply told me that the problem was more complex than he thought and said he had to do a session of access on my computer. He told me about the tax of $149.99 and I told him that I couldn't do it.

    Now, I came to the community in the hope of help.

    Thank you for your help, it's greatly appreciated! :)

    News of the computer:

    Dell Latitude E5410

    Windows 7

    32 bit

    Processor i5

    KB, try the steps that apply to your operating system, in the links below.

    Use the System File Checker tool to repair missing or corrupted system files.

    https://support.Microsoft.com/en-us/KB/929833

    Difficulty of Windows Update errors by using the DISM tool or System update preparation tool.

    https://support.Microsoft.com/en-us/KB/947821

    Note: Download and run the "System Update Readiness Tool.

  • I visit my daughter and they have DSL but it so slow and Facebook does not completely load. How can I know what the problem is and fix it?

    I visit my daughter and they have DSL for the game but not a computer. I can connect to the internet with my laptop very well, but it is so slow and especially never finishes loading. Unable to get Facebook and Farmville to load correctly how to find what is the problem and ffix it? Its driving me crazy!

    Hi DonnaSuttles,

    ·         What operating system is installed on your computer?

    ·         If it works well before?

    ·         Did you do changes on the computer before the show?

    I suggest you to check and clean the boot if the problem persists.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

    You can also view the article mentioned for more information:

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

    Let us know the results.

Maybe you are looking for

  • Satellite A200 - 18 M - HD - DVD player faulty

    Hello One of my clients bought a laptop Toshiba Satellite A200 - 18 M. The HD-DVD player, works very well, but now is not ready any CD / dvd, including e Toshiba recovery DVD. The drive has become defective. How do I get this repaired / replaced? The

  • Variable and nested loops

    Hi, I'm a relatively new to programming of LV, so be gentle. In a Word, I am running nested loops than the material test power on and off cycles. The parameters for each loop is entered on the front panel of the user. For example, the power supply at

  • IAM trying to install a mobile navigation system Silvercrest ANP-E3540T / OTP-E354ON

    It will install not automatic, but when I try the insraller.exe nothing happens, can you help thank you

  • Pls Help! Uninstall Intel without wireless/Bluetooth

    Pls help! I try to upgrade to Windows 8 but Update Wizard says that I should uninstall "Intel proset wireless/Bluetooth" for reasons of compartibility. I used "Microsoft Fix IT" to uninstall. I tried the upgrade, and he says "Intel Wireless/Bluetooth

  • Link to CD or the download of Windows 7...

    Dear Sirs, At our office, we have an HP desktop computer that has installed Windows 7 Pro. We would like to do a complete reinstallation of the system. Unfortunately there is no CD original Windows 7, delivered with the pc. Of course, we have the key