Windows 7 system crashes so that the installation of updates, not shut down
I've upgraded to Windows 7 using a disc of Microsoft; Windows Update started downloading the updates. Now it will not shut without doing it manually. If there are 5 updates, it may hang on the update 4. Then, after much cleaning in safe mode, etc, it will work perfectly, but hang in there 'shutting down '. even if left overnight.
You receive errors related to updates?
- Open Windows Update by clicking the Start button, all programs and then click Windows Update.
- In the left pane, click view update history.
- Find an update for Windows that has failed to install, and then double-click the update to view more information.
Updates that have failed to install will display failed under status, next to the name of update. - In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.
FYI
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
Open the Windows Update troubleshooting tool
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
Tags: Windows
Similar Questions
-
Setup cannot copy files?
I did a reinstall of windows xp sp2 when I got an error that says that the installation program could not copy migregdb.ex_ from the cd. Please make sure the disk is in the e: drive and try again. I can locate the file and find no problem sound on the disc. Here is a list of the files that gave this same error.
migregdb.ex_
icwconn1.ex_
ICWCONN2.ex_
INETWIZ.ex_
icwhelp.dl_
icwutil.dl_
icwrmind.ex_
ICWDL.dl_
icwx25a. COURIER
icwx25b. COURIER
icwx25c. COURIER
ICWIP. COURIER
Phone.ic_
Phone.ve_
State.ic_
MSICW.is_
MSN.is_
support.ic_
Msobshel.ht_
ISIGNUP.ex_
icwtutor.ex_
icwres.dl_
trialoc.dl_
Oobeinfo.in_
Oemlogo.gi_
Mouse.ht_
ISP.ht_
Oempriv.ht_I know that the volume control does not work, and that the windows sounds are not listed, if you try to change the sounds on the system. As the noise of opening and closing session. The drive installed on a different hard disk on the same computer without error, it should not be dirty or damaged. If anyone can help with this please?
JOEY
To the file copy stage of the registry would be game. It could be a permissions issue, you could mount the drive in a different Windows NT installation type and set the permissions.
John
-
I installed Photoshop CS6 extended (student version) on my Mac in May last year. It has worked perfectly until recently when the system tells me that the program is perhaps not able to work with OSX (I have OSX 10.9.5). I have now uninstalled the PS application and you want to reload. I have the S/N codes and redemption. How should I proceed?
Please visit to download applications download Creative Suite 6 .
Kind regards
Hervé Khare
-
Installation of updates on Shut down taking more than 1.5 hours for 1 update
Hello - I just bought a Vaio VGN - SR yesterday with Vista Professional on this topic.
I did very little for it, except that I installed Office, Firefox and Webroot AntiVirus. At the stop, he wanted to install updates 20 - he is now trying to install the 5 / 20 update and tried during the last 2 hours. It did not crash - the wheely thing always moves as the points after the "installation of update 5 of 20.
Help, please!
Thank you
JHi Jo,.
Welcome and thank you for viewing on the Microsoft Answers community forum.It is normal to take a long time to install the updates, but more than 1 hour to install an update is not normal.
However, you need not worry. All you have to do is to try to restart the computer. First try to restart the computer in normal mode and check if it progresses to install some other updates. Otherwise try to reboot again in safe mode.
Note: You can get the safe mode by pressing the F8 key repeatedly when the first screen displayed (after you turn on or restart the computer). Then, by choosing the option of safe mode.
After going to safe mode, installation, updates should be fine.
Please try these and keep us updated on the status.
Take care.
Kind regards
Cedric M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: same set of updates on both computers due to different problems, one problem being a system restore.
I have two Windows 7 computers in my house. They all have two problems after installing updates a month ago. The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2". 2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.
1 COMPUTER DETAILS:
News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled. Trend Micro Internet Security installed at the beginning of the use of the computer. Analyses Micro trend came clean.
Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use. Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.
While in the standard account, I welcomed these download/install updates and was prompted to restart the computer. I was done with the computer, so I just closed instead of restart. According to "Your update history Review", it's updates and they were all successful:
Update for Windows 7 for x 64-based systems (KB980846)
Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
Update for Windows 7 for x 64-based systems (KB982519)
Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)After you turn on computer back, everything seemed normal. I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot. Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator. (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM! Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored"). I do not have the computer to eat, and it don't has not asked me if I wanted to restore it. He just did, just on its own initiative, when I went on the admin account. A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed. I am not absolutely sure if nothing else was touched.
I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates. It doesn't seem to help. Shortcut icons are still missing. Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed. (The first time, the little checkmarks were already there for all five.) This is the update that is NOT now pre-checked:
Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
Do not reinstall the five updates. I don't know if I should jump install them again, or if I should install only the
now, four are already "pre-checked." I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.Since I installed the latest updates for 1 computer with no apparent problems:
X 64-July Windows malicious software removal tool (KB890830) 2010
Update security for Windows 7 for x 64-based systems (KB2032276)NEWS ON COMPUTER 2:
The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months. It has not come with any pre-installed antivirus. Trend Micro Internet Security installed at the beginning of the use of the computer. Analyses Micro trend came clean.
Reminder: Set up immediately with an admin account and a standard account for everyday use. Computer has been set to automatically download and install updates for Windows, but is about to inform me first.
At the time of the problem above with the laptop, desktop computer has been enabled. As all loading,.
an error message came that there was some kind of issue with the .NET framework. At another person asked if he knew what was up with that, and it didn't. Did not note the specific message, thinking he would tell me again if there was a real problem. I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems. I have yet to see this message. After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it. Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates. Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been. Changed the automatic Windows Update setting to warn me before you download and install updates. I have not installed the missing update. Said the only other person in the House who would probably bother install updates to not install it.A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office). The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea. I installed all the 'important' updates and have not seen any more problems with computer 2.
BACK TO THE COMPUTER 1:
Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen? I have a feeling I will say that the random system restoration do not occur, but he did.
Thanks for any help.
No, I don't use the Norton removal tool.
IN RE COMPUTER 1 ONLY:
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4 for good measure, reset Windows Update by...
How to reset the Windows Update components?
-Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
http://support.Microsoft.com/kb/9710585. restart & test.
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Literally what the title above says. I just can't get anything to boot. CS4, CS5, PSE 8 PSE 9. It worked just the other day when this laptop had NOTHING on this subject. but now that I have all my files migrated absolutely nothing does not yet have flash player.
Have you checked: error: "Setup cannot initialize ' | Windows
Failed to initialize the installation of Adobe
Mac - installer failed to initialize. (etc.) Help! I can't install the CS6 Master Collection Suite.
Setup could not initialize photoshop cc, Fixed - YouTube
Concerning
Stéphane
-
When I try to put a wallpaper of connection with the windows 7 edition program account screen whenever I chose a photo, a message came and he said in details, I had to turn off my administrative authorization.
Hi Ruth163,
Thanks for posting on Microsoft Windows 7 answers Forum!
User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users.
We do not recommend disable user account control.
If you turn it off, you must reactivate as soon as possible.Use the following procedure to change UAC settings.
To perform this procedure, you must be logged on as a local administrator or provide the credentials of a member of the local Administrators group.
To change UAC settings:
1. click on start and then click Control Panel.
2. in Control Panel, click user accounts.
3. in the window user accounts, click user accounts.
4. in the tasks window user accounts, click Enable user account control or disable.
5. If user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click Yes.
6. in the Security section of the Windows solution Center page, click on adjust UAC settings.
7. on the user account control settings page:
8. to turn off UAC, move the slider to never notify, and then click OK.9. to enable UAC or change levels of notification, move the cursor over the appropriate notification option, and then click OK.
For more information about user account control, see the following documents:
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider
http://Windows.Microsoft.com/en-us/Windows7/what-is-user-account-controlIt will be useful.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum
-
The printer door does not shut down after printing
HP Envy110 model D411c. I printed out a page, the door opened, the extension arm is released, but was partially blocked. The printed page in the status bar and was recovered, the extension arm retracted, but the printer door has not closed completely. I printed the pages since then, everything works well except for the door. It closed partially and stops. No warning appears on the screen. I have to close to allow the doors close. Help!
OK, I have a solution thanks to the autonomy and the helpline UK. At least, it works for my desire 120th All In One.
The door / cover will always return to the position where the task was started. I don't remember to start work with the Panel in the raised position, but apparently I did.
Solution: With the printer, gently push the door closed. Now print or copy. As the work that started with the door closed, he will return to this position even when the work is completed.
Why oh why is anybody's guess. Good luck!
-
Satellite L300D - 13 X: Vista crashes everytime during the installation of updates
Hello!
I have a Satellite L300D Vista HB.
It started with the machine crashing, thought it would be OK after reinstalling operating system.
But it hangs whenever he has installed updates.Anyone experienced the same problem?
I know, I can just ignore the updates, or choose another OS, but what I would like to know if there is a general failure with this machine and updates.
It must be some recent updates to this year, since the problem first started a few weeks ago.Hello
I never had problems with the Vista updates.
Sometimes I need to update the driver WLan driver sound to the latest version after Vista has received some updates, but the operating system has never crashed.
But I switched to Windows 7 and now I m using the latest Win 7 OS which is much better than Vista.I don't know why the updates affect the mobile-specific features; m may be due to old drivers.
Maybe you should install Vista and should update the OS before installing drivers or softwareGood luck
-
SP3 stops when a file named beethov9.wma could not be copied
Do you Google? -Online http://lmgtfy.com/?q=beethov9.wma+%2B+sp3
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)? Who were these applications that run in the background when you tried to install SP3 (Windows XP)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
update problem failure in the installation of updates to restore changes
I use windows 8 unique language. Whenever I have install the update and try to restart my pc, when you set up the window, there is message 'Failure in the installation of updates to restore changes.'
Help, please.
Thank you.
Hi Manish,
This problem may occur if Windows updates are not getting not properly installed or damaged.
I suggest you try the steps from the following link:
"Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
http://support.Microsoft.com/kb/949358
Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.
Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.
-
I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time
See link below and check:
-
My antivirus and windows firewall was also automatically disabled and I was not able tun back on
So, I tried to reinstall the windows operating system 7, but when I try to install, I get an error saying:
Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. »
The error code is: "0xE0000 100."
I think that some virus or malware is rampant in my installation of windows system. So, I want to know there is a way to solve this problem...
Ideas or suggestions that anyone has would be greatly appreciated!
Thank you!
See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-code-oxe000100-windows-installation/aea498e2-09c3-43aa-bfa5-c06e68b1ea0c
J W Stuart: http://www.pagestart.com
-
I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."
I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»
Problem is that I must install on a Compact Flash 4 GB.
Can someone help me please?
For Windows Embedded-related problems, please post in the forum on TechNet:
http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded
-
I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.
Download the 64-bit Installer,
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
Maybe you are looking for
-
HP ENVY 5530: B814E906 error code
Bought this machine yesterday, works fine when connected with the USB of my count. However I can't work in Wi - Fi. Judge for 2 evenings together now more than a dozen suggestions posted here. Also run printing HP and Scan Doctor several times. Withe
-
upgrade to from7d 6 d - flash &; wifi issues - with a value of upgrade?
Dear friends, Currently, I have the following for about 2 years: 7 D Canon EF-S 15-85mm Canon EF 24-105mm L Canon EF 35 mm f2 and Blackberry 9900 I plan to sell 7 d & lens EF-S for the 6 d and use the lens with the new body. The main objective is of
-
I need some serious help please someone... I get a message that Windows File Protection is! and he says that "files which are required for Windows to run properly must be copied into the DLL cache" that I know, but I do not know why this has happened
-
HelloSince a few days I have can´t open a report in EN Studio.Connection works fine, but if I try to open a report, the following error occurs:1.) out of memory.(2.) HARSnapin Initialize error 372. Failed to load control 'DesignPty '.Any ideas?EN Stu
-
I can't upgrade my lightroom 5 for lightroom cc after buying the plan of photography
How to do the above? There is no way, as CAP I see upgrade.