old canon BJC 250 printer to laptop

Similar Questions

• I can not connect windows 7 to an old Canon BJC 250 (have USB to parallel cable. conv)

  I have a Canon BJC 250 printer connected to the USB port ieee. Its a printer Workhouse. Never had a paper jam all these years. (1996), I found ink cart. to do this in a thrief store. I can't seem to part with them. His semple to operate and works better than my Dell 725 and the Epson conbo. I would like to know if there is conpatable with Windows 7. I can't install the driver of this OS. If anything can work with other pilots from cannon. Notes; I still have the installation CD. but it will not be installed.

  If you go to the website of Canon in the following link, it shows as the latest drivers for XP.  In addition, if you click on "Service and support" at this link and then search for "Windows 7", you will find a document that lists the BJC series printers that are supported for Windows 7 and the 250 is not on this list. "  Here is the link to Canon: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/bjc_series/bjc_250_series#ServiceAndSupport
  I thought that maybe the BJC-240 which is support could be close enough, but based on what follows, where the user asking the question said he tried this driver, apparently we don't: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/canon-bubble-jet-bjc-250-printer/d27af8d2-a770-e011-8dfc-68b599b31bf5

• I have a Canon BJC-250 printer which is not printing. I checked the ink (OK) supply. I even tried to test print and it did not work.

  The canon BJC 250 is not printing. I have tsried trouble shooting but failed to print. Help, please

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Canon BJC 80 printer prints only with Windows 7

  I installed Windows 7 on my laptop and downloaded the new driver for my Canon BJC 80 printer.  The computer seems to recognize the printer, but it does not print.  I do not understand why my printer is listed as the default printer and appear to be installed correctly, but does not print.  My printer works already without problem with XP and Vista.  Is there anything I can do to get the printer to work?  Or my printer won't work with Windows 7?  Thank you.

  I have Canon BJC-80, working on Windows 7 Sony Vaio laptop: USB-parallel interface did not work. Bought and installed StarTech 1 Port PCI Express (x 1) basic parallel ExpressCard ($70 +) that supports two-way equipment. Removed the previous installation of BJC - 80 and reinstalled the printer on LPT3 (was on LPT1). Worked perfectly. Hope you have an ExpressCard interface to use; If this isn't the case, maybe there are other bidirectional port LPTx more robust handling solutions. Found this solution of amateur astronomers who were trying to get the old CCD cameras to work via the printer port. They found the USB interface / incomplete and required parallel bidirectional handling. Nice to have this small printer with me on travel now. I hope this helps.

• canon mp 250 printer

  Hello

  I have a problem of recognition between my pc and the canon mp 250 printer

  Thanks for your help

  French

  Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:

  http://support.Microsoft.com/common/international.aspx

  Please click the language icon at the bottom of this page to select your language from the list of countries / regions pour post your question in the language of your choice. The forum you posted is fr English only. If you can't find the language here, additional support options to international destinations can be found by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you.

• Canon BJC-50 printer and scanner work with Windows 7?

  I have a printer Canon BJC-50 with the cartridge scanner.  I ordered a USB to parallel cable adapter must be able to connect to my laptop, because I do not have a parallel port.  The Windows 7 compatibility page says that this printer is compatible with Windows 7.  Canon said that it is not.

  Has anyone successfully connected and used a Canon BJC-50 with Windows 7?  If so, were there any problems?

  HI - same issue with Canon BJC-80. Says Windows is compatible and Cannon did not write! My BJC-80 prints OK with a USB/parallel cable and install via Windows 7 OK - but printer response time is in minutes to hit a comand "Print" in any program, for example. MS Word 2010?

  Suppose that we are victims of the creep of technology and need to buy a new printer - shame I have heaps of cartridges left!

• Canon BJC 5000 printer driver

  I have a Canon BJC 5000 which stopped printing. I tried to reinstall, but get the error message driver will not load.
  How can I get printrer work - where can I get a driver suitable for the installation. The CD supplied with the printer will not provide the correct driver.
  Thank you

  http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

  Link above is for Canon Drivers/Downloads.

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 driver for Canon BJC 210 inkjet printer

  I need a Windows 7 driver for my Canon Bubble Jet BJC - 210 printer.

  Does anyone know how to get a printer driver for my old inkjet Canon BJC-210 printer.  When I bought in the late 1990s a driver disc wassupplied with a driver for Windows 3.1, and he continued working when I upgraded to a laptop running Windows XP.

  Now have a new laptop with Windows 7 loaded and Microsoft no longer supports the driver.
  Does anyone have an idea.  The printer is a nice, small, just to feel and I was always happy with it and I have lots of spare ink.
  It would be a shame to have to throw away sust in the interest of a printer driver.

  1990? If the drive was origonally to the win3 its will not work under win7. The printer is not compatible with win7.

  If you have win7 Pro or Ultimate installed there are some options, which can be complicated to impliment.

• Need driver for printer Canon BJC-210 for XP

  I have Windows XP, need a driver for a Canon BJC-210 printer.  It works very well, have the ink.  Driver got wiped out when entire disk had to be wiped clean to caused by a virus.

  Canon itself does not have one, and there are all kinds of scams out there to want not to download whatever it is not safe.
  This printer still works, ink lasts forever and able to get cartridges still easily.
  Do not want in the trash without no reason.

  The driver integrated in Windows XP does not work for you?

  What happens when you connect the printer to the computer?  Please provide error messages without paraphrase.

  Or try:

  • Connect the printer.
  • Cancel the Wizard "new hardware found" opens.
  • Click Start > printers and faxes > add printer
  • Select "local printer attached to this computer.
  • Uncheck "automatically detect and install my plug and play printer."
  • Select "Use the following port", and then select the appropriate port in the drop down list (see note below)
  • On the next screen, select Canon and BJC-210.
  • Complete the wizard.

  Note: Things can be difficult if the printer connects USB and there is not "virtual printer to USB port" in the drop-down list.  The simplest solution I've seen is to connect any generic USB printer.  After installation of Plug and Play, you can remove the printer but the USB virtual port will be there.

• Windows 7 and Canon BJC printer drivers?

  New laptop Dell Inspiron 14 has Windows 7 OS. It recognizes my Canon BJC-80 on buy infrared does not print. No error message. Seems that the printer does not appear in my devices. The original CD has not helped. Downloaded drivers from Canon doesn't help. Try to add the printer via an infrared connection does not work. Is there a driver for Windows 7?

  "spokes2" wrote in message
  News: 21a2d0c4-ac66-41a6-9891-17085055204d...

  > Dear Dominique, please can you tell me how to find this driver for
  > printer Canon BJC80 of the windows 7? I looked in the windows
  > updated the site and can't find it. Can you give me a link to go directly
  > It please? I love my BJC80, it's such a good little printer with
  > so useful scanner option. I also need the driver for the scanner to
  > courses, but the printer driver for W7 is vital. Thank you, Simon.
  > (spokes2 email address * address email is removed from the privacy *)
  > PS. My laptop has no problem with parallel port and reads the
  > printer with XP, quite happily but I want to change my W7 and keep
  > the printer will.

  Go in the * Canon * Website and look. I can't tell you if
  the drivers, you need exist or not, but keep in mind that each time a
  new operating system comes out, the former hardware manufacturers
  often decide that it is is not worth their time and their efforts to develop
  new drivers for it. So, you might well be out of luck.

  --
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003

  Ken Blake

• Canon BJC-265SP, but after Setup printer, still unable to print

  I use the 64 bit and Canon BJC-265SP, window but after Setup printer, still unable to print. The installation works fine with 64 bit window.  Please advice.

  Hello

  1. What is the error message you get when you try to print?
  2. what operating system is installed on your computer?

  If you use Windows 7, check if the Canon BJC-265SP is compatible with the operating system on the Compatibility Web site (your device is however not listed).

  I suggest that you run the utility troubleshooting printer and check if that helps.

  See also: solve printer problems.

• My new HP Pavilion Desktop PC has no option for my old Canon Pixma iP 2600 printer usb connection

  Greetings:

  I can locate is no longer the installation disc for my my old Canon Pixma iP 2600 printer.  I am able to install it w / add it as a printer in the Control Panel, but the Office feature fails to read that the printer is connected via the usb cord.  I'm not find no possibility to install it as a usb printer.  Please help as soon as possible.  I can't afford to replace the printer and I have several documents that I need to print today or early tomorrow, or there will be dire financial complications for me.  I NEVER had that problem w/Dell.  (the operating system is windows 7, which is exactly what I was running on my old dell model - I searched this forum and find a similar question, but that the consultant has been able to find a usb option in the drop down menu to the port facility.)  that option is absent in my attempts).

  Thank you!

  Interestingly, I discovered (after wasting a ton of time online and on the phone w/less useful HP tech) that the problem was in the two faulty usb ports on the front of this new processor.  at this point, I plan to return to the model of costco and return to dell.  Thank you for your help.

• Need driver for printer Canon BJC - 210 Windows 7

  No further questions.

  Windows 7 will drive a printer Canon BJC-210 (have the CD). It does not appear in the downloaded list. Also with windows XP (my deskatop).

  Hi stlarry,

  You will need to contact Canon, because they are responsiblie for Windows 7 drivers for their devices.

  http://www.USA.Canon.com/consumer/controller?Act=SupportIndexAct

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When installation printer Canon BJC-8200 error comes up 'not compatible '.

  Original title:

  Canon BJC-8200 ink jet printer

  I tried to install a Canon BJC-8200 as a local printer and cannot find any driver for it.  I am running Win7 (64 bit) and by a forum it seems that Windows 7 contains the driver but still cannot print and when I try to use the Canon CD supplied with the printer Windows said: it is not compatible.  Help.

  Hello
  Windows 7 Compatibility Center says that the device is compatible and the printer installs automatically without extra software.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=Canon%20BJC-8200%20Inkjet%20Printer&v=Canon&UID=0803A003&l=en-us&PF=22&PI=5&s=Canon&OS=64-bit
  In the meantime, you can contact Canon to see what they have to say on the matter:
  http://www.Canon.com/contacts/
   
  You can also try to run the printer Troubleshooter and check:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.