Windows 7 Ult has suddenly and bad start showing a message "non-genuine copy".

Similar Questions

• Can I put a non-genuine copy of windows to a genuine copy of Windows 8 Pro?

  Now before anyone starts to judge I want to give some context as to what happened.

  I bought the upgrade Windows 8 Pro pack which was a student offered to host my new hybrid hard drive. I installed on my previous Vista hard drive and I noticed that I was required to install the pack to upgrade the disk with a previous version of Windows. Therefore, I decided install Windows 8 Pro Vista hard disk and clone new hard disk.
  The cloning went perfectly. However, when I entered the hard drive containing the Windows 8 Pro clone, it did not allow my turn and in Device Manager it does appear that the system. There is also a Build number located at the bottom right of my desktop screen. Think I should reinstall windows from scratch, I proceed to the real system command (the one containing Vista previously which is now upgraded to Windows 8 Pro) and decided to reinstall windows in the control panel and wipe all readers.
  I quickly realized that this is a mistake, because when I boot into the previously-Vista drive, reinstalling Windows 8 became a trial version instead (with XXXX to build lower-right again). In regards to the cloned drive, the error starting screen (that require you to reinstall windows because of lack of boot configurations).
  I lost the disc Vista it long time ago and I don't have the box of windows with me more. I copy down the so-called activation key but it's one with xxxxx-OEM-xxxx. Before this script together, under my computer properties, the product key seems to be forever in a State of "2 days before automatic activation" and when I click on it, he said: I'm unable to activate this product key.
  So that being said, I was wondering if I could just download and run a picture of a non-genuine copy of Windows in order to start a new installation (ie. choose with windows installation disk and reformat the drive containing the windows build demo).
  Thank you.

  I just decided to hell with it and contacted Microsoft technical support for assistance.

  Managed to activate my windows and things work fine now.
  Thanks for the comments without worrying about all of you who responded and sorry for taking your time.

• Windows Media Center has suddenly stopped being able to see tuners. Error "could not find the tuner or all tuners are busy."

  Original title: Windows Media Center has suddenly stopped being able to see tuners.

  I am running Windows Media Center and have a 6 Ceton infinitv tuner connected to my network.  Since a few weeks things have worked very well.  Now suddenly after installing a faster wifi adapter, I get messages such as unable to find tuner or all tuners are busy... who don't feel like I can always go to the tuner by Explorer or chrome, by typing the address of it and it arises but also shows that it is set on the channels that I am no longer watching.  Any ideas on why WMC is suddenly acting when the only thing I did was install an a6200 netgear adapter, nothing has changed.

  Hi Eviln,

  Please contact Microsoft Community. I understand that you have a problem with the TV Tuner card, I will surely help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 driver corrupted or obsolete.
  3. wrong settings.

  Try the steps listed here:

  Method 1:
  I suggest you perform a clean boot and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to download and install the latest driver for TV Tuner card on the manufacturer's Web site and check if it helps.

  http://cetoncorp.com/product-support/

  Method 3:
  If the problem persists, you can see the steps in the following article and check if it helps.

  Watch TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions

  See the article for more information.

  Get help for your TV tuner
  http://Windows.Microsoft.com/en-in/Windows7/get-help-for-your-TV-tuner

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Windows Live Mail has suddenly stopped working

  My Windows Live Mail has suddenly stopped working.  I get the error message below.  I contacted Time Warner - talked to 3 different technicians, each gave different instructions, of which none has solved the problem.  I contacted Microsoft and they said that they do not support Windows Live Mail.   I am able to access my e-mail through Time Warner Webmail, but I want to get Live Mail works again.  Can anyone help?

  Can't send or receive messages on behalf of Wi.rr (jxxxxx). Windows Live Mail could not open a session secure e-mail server using password authentication. Contact your e-mail provider and verify that it supports secure password authentication. To change the connection setting, in the folder list, right-click on the account name, and then click Properties on the shortcut menu. In the Properties dialog box, click on the servers tab, and then under incoming mail server, select a logon option.

  Server error: 0x800CCC90

  Server response:-ERR an authentication mechanism MUST be entered

  Server: 'mail.twc.com '.

  Windows Live Mail error ID: 0x800CCC18

  Protocol: POP3

  Port: 110

  Secure (SSL): No.

  Windows Live Mail could not open a session using authentication Smail server fix Password has.

  I don't think it's something that 'suddenly' happened. Does not support the server you connect to SPA, so if you have this option, you will be not be been able to connect to this server. You may have changed the setting to try to solve another problem?

  Right-click on the account name in the folders pane, and then select Properties. On the servers tab, select connect with authentication in clear text. Then try send/receive for this account. If you see an error message, please copy and paste into your answer.

• back to vista from a non-genuine copy of windows 7

  I let someone borrow my desktop computer for a month and they have installed a non-genuine copy of 7 on it and I want to know if there is an easy way to get back to my real vista without the disc. I never had the drive with my computer, it came pre-installed with windows vista on it. I want to just return.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• A non-genuine copy of windows vista__ activation

  I have a non-genuine copy of windows vista and I can't activate it without a product key.

  I have a non-genuine copy of windows vista and I can't activate it without a product key.

  Hey Maso72

  Sorry, but microsoft doesn't sell more vista

  and the vista product keys are not available for free

  Search for vista purchase on amazon.com, etc.

  Microsoft now sells windows 7

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Walter, the time zone traveller

• How do you get a message that has been marked "do not show this message again" to reappear?

  How do you get a message that has been marked "do not show this message again" to reappear?

  Preferences > General > reset all warnings.

• My Windows Media Player has suddenly stopped opening and launch, I can't access it at all! Why?

  Last night I was able to watch movies and listen to music on my Media Player. Today, I can not open it... No matter how I try to open it, I get a message indicating the failure of execution of the server. I don't know what happened or what I'm supposed to do! Pleeeeease help!

  Hello

  1. what version of Windows operating system is installed on your computer?

  2. What is the error message or an exact error code?

  I would suggest trying the following methods and check if it helps. It applies to Windows 7.

  Method 1:

  Run the troubleshooting Windows Media Player settings tool and check if it helps.

  Open the troubleshooter in the Windows Media Player settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Re-register regsvr32.exe jscript.dll and check if it helps.

  Follow the steps to re - register the .dll file:

  a. click Start, type cmd.exe in the search box and right-click on cmd.exe and click run as administrator.

  b. type the command: regsvr32.exe jscript.dll and press enter.

  c. open Windows Media Player and check whether the problem is resolved.

  Method 3:

  Try to uninstall and reinstall Windows Media Player and see if it helps.

  Step 1:

  Uninstalling Windows Media Player:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find multimedia and uncheck the brand in the face of Windows Media Player.

  d. restart the computer

  Step 2:

  Reinstall Windows Media Player:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the multimedia functions and place a check mark in front of the Windows Media Player.

  d. restart the computer.

  Hope the information is useful.

• Message non-genuine windows appeared after Norton ran food Eraser and remove DNS 'bad '.

  Hi, seemed to be getting some questionable e-mails of * address email is removed from the privacy * and then similar Skype allegedly asking me to download the voice message so contacted Norton and made scan with power eraser to check the virus.  They removed DNS 'bad' (no other prob) and then restarted the pc - then a message appeared suggesting I had non-genuine windows (this is XP Professional) and the background became black.  Well, pc from Dell with XP loaded about 6 years ago but about 3 years ago I got the virus and engineer new version of XP.  A friend told me to check it was authentic and I ran across Microsoft, and it was.  Receive regular updates of Microsoft for it and get the messages from Microsoft saying they would stop supporting it in April next year.  I really think I have a genuine version of Windows.  What is wrong and how there address.  It would be very happy if you could advise.

  Hi, seemed to be getting some questionable e-mails from * address email is removed from the privacy * and then similar Skype allegedly asking me to download voice message so contacted Norton and made scan with power eraser to check the virus.  They removed DNS 'bad' (no other prob) and then restarted the pc - then a message appeared suggesting I had non-genuine windows (this is XP Professional) and the background became black.  Well, pc from Dell with XP loaded about 6 years ago but about 3 years ago I got the virus and engineer new version of XP.  A friend told me to check it was authentic and I ran across Microsoft, and it was.  Receive regular updates of Microsoft for it and get the messages from Microsoft saying they would stop supporting it in April next year.  I really think I have a genuine version of Windows.  What is wrong and how there address.  It would be very happy if you could advise.

  Hi Carolina,.

  Was it a Dell engineer who has reinstalled Windows for you?

  In any case, if this is a Dell machine, there will be that a license key joined the PC somewhere, usually on the back, but if it's a laptop, it'll be below.

  See this article for what to do if you can not solve the problem:
  http://support.Microsoft.com/kb/916247/en-GB

• Windows 7-7 has BSOD and F4

  Original title: bob cadena

  Hi all

  I meet a closed blue screen that started when I had a bigger hard drive installed. I took the device to the place that installed and their test showed no problem with HD. I mainly get the info even afte each event. :

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 7A

  BCP1: 0000000000000.20

  BCP2: FFFFFFFFC000009D

  BCP3:FFFFFA8006CBA7CB

  BCP4: 00000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  C:Windows\Minidump\11816-33883-01.dmp

  C:\Users\bobcadena\AppData\Local\Temp\Wer-52759-0.SysData.XML

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               f4

  BCP1: 0000000000000003

  BCP2: FFFFFA8006CA7060

  BCP3: FFFFFA8006CA7340

  BCP4: FFFFF8000337C750

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\011816-41215-01.dmp

  C:\Users\bob cadena\AppData\Local\Temp\WER-57611-0.sysdata.xm

  Any help would be greatly appreciated.

  Thank you

  Hello

  7 has error checking, {20, ffffffffc000009d, fffffa8005dae7c8, 0}
  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 4 fc 70)
  BugCheck F4, {3, fffffa8006ca7060, fffffa8006ca7340, fffff8000337c750}
  ETW unavailable minidump
  Probably caused by: ntkrnlmp.exe (nt! PspCatchCriticalBreak + 92)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  Make sure that you have checked carefully to such malware indicated previously.

  1. uninstall AVG and mbam then run their Creator removal tools to avoid problems causing remains. Use MSE - free which offers an excellent protection, detection, and
  compatibility.

  AVG removal tool
  http://www.Avg.com/us-en/utilities

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  MSE - free
  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  2 Chekc with HP Support, their documentation online and drivers and ask for their
  Forums about known problems. Update the BIOD'ZYL chipset drivers and major
  device drivers embedded and separate (see above driver update methods).

  BiosVersion = 1 786 v01.26
  BiosReleaseDate = 12/07/2011
  SystemManufacturer = Hewlett-Packard
  SystemProductName = HP Compaq dc7900 Convertible Minitowers
  Family = 103C_53307F
  SystemVersion =
  SystemSKU = NK943UP #ABA
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct =: 3032

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  3 as it is necessary to use ALL other methods in the above and those below.

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7 
  -------------------------------------------------------------------------

  Code: 7A 0x0000007A

  The main causes of this error are virus/malware, drivers, memory, and disk damage. And it may even be combinations of those so meticulous control of all is necessary. Added the possible causes are clerical errors such as the motherboard damaged or other materials.

  BCCode: 7A 0x0000007A<-- read="" this="">
  * 1137.html? order = votes http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  BCCode: 7A 0x0000007A
  https://msdn.Microsoft.com/en-us/library/ff559211%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  ==================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Security/antivirus/anti-spyware programs have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  ======================================================

  BCCode: F4 0x000000F4<-- read="" this="">

  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
  https://msdn.Microsoft.com/en-us/library/ff560372%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  Rob - SpiritX

• Windows XP sp3 has suddenly stopped show all devices in Device Manager.

  Found problem when I couldn't put any printer online or can I install a new device. Everything else seems OK with a USB hard drive and modem works fine. Queue Pinter seems to have several printing with no name, but all around 34 bytes which keep coming back when removed.

  Hello

  1. you receive an error message when you access the Device Manager?

  2 have you made changes on the computer before this problem?

  3. What is the brand and model of the printer?

  Method 1:

  Follow the articles and check them out below:

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539

  Download the update and check:

  Device Manager may not show that all devices and network connections may not display network connections after installing Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/953979

  Method 2:

  Assessment of problem printer if the Printer Spooler service is running.

  Step 1.

  You can start the print spooler by using the following procedure:

  a. in the Administrative Tools folder (click Start, then Control Panel, then system and Maintenance and then Administrative Tools), open the Services snap-in.

  b. Locate the print spooler service in the services list and confirm that the status is started. If this is not the case, select the service, and on the Action menu, click Start.

  You can also do this from an elevated command prompt window (right click on prompt in the start menu and click Run as administrator) by typing the following command: net stop spooler & net start spooler

  (It of actually two commands, "Net stop spooler" and "Net start spooler", came at the same time for that process control Windows both, one after the other).

  Step 2.

  To start the dependencies for the print spooler service, follow these steps:

  a. in Services, right-click on print spooler and then click Properties.

  b. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.

  c. take note of each service, click OK, and then restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.

  Reference: http://support.microsoft.com/kb/946737

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Hope the above information is helpful.

• Windows updates keep neglecting returns and finally starts successfully.

  Hello

  I have to be ongoing problems with Windows Update failures for several months and nothing to do, it seems to me and nothing from what I've read online seems to help.

  I have a laptop Acer E1-531 runs a 64-bit version of Windows 8.

  Almost every time that the laptop starts, it tries to install the updates fails (3 times), comes back and finally starts successfully. It takes anywhere from 10 to 20 minutes.

  Can someone please? I'm desperate.

  Thank you

  Hi Mark,

  Microsoft updates are getting failed?

  This problem may occur when you try to install Windows updates, Windows failure configuration updates. Restoration of the changes. Do not turn off your computer.

  I suggest you to try only Windows 8 steps from following link and see if that helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Note: Perform an upgrade on the spot will restore you the current installation of Windows for the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD. If your computer came with Windows pre-installed, see your computer documentation for instructions on how to do an upgrade on the spot. Otherwise, follow these steps.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Windows 10 Pro has failed and I restore my laptop OS (Widnows 7 pro) plant how can I upgrade again to Windows 10?

  Dear Ms team

  In October, I've upgraded to windows pro via Ms 10 and after that error during the download of updates in Nov 22, all possible windows for disk repair HARD is not too and on DVD for windows 10 cannot repair my Sony Vaio VPCF1.

  So now, even once, I want to upgrade to Windows 10 please advice how I can, also here the internet speed is low.

  Your more early comments very appreciated.

  You can download the. ISO for Windows 10 November update and upgrade the repair:

  How to download official Windows 10 ISO files

  then

  How to: upgrade an of repair using the file ISO for Windows 10

  also check:

  How to: 10 tips before installing Windows 10

• On windows 8 CC stopped working and install new show no programs control panel CC

  Hello

  For several weeks, I tried to update my programs since the CC Control Panel, but when I open the CC table it opens but shows not all programs. Please see this file that shows a WHITE Panel: http://magnetart.com/CCPanelBlank.jpg.

  I use Windows 8 on an HP laptop. Before today, I've updated my CC on 11 August 2013 and CC had worked before my problems in mid-December.  Here's what I've done so far:

  1. Downloaded the latest CreativeCloudSet file - Up.exe on 28/12/13; installed and still no show of the CC Control Panel programs
  2. sent an email to support CC (but received no reply)
  3. Today, I opened the CC table - and still no programs have shown
  4. uninstalled CC in my task manager
  5. downloaded and intsalled the last CreativeCloudSet - Up.exe today
  6. run the file CreativeCloudSet - Up.exe "again" and appeared to install, BUT at the opening of the CC Panel - I AI No. PROGRAMS ACCUSE AGAIN.

  My end of subscription in March - my renewal notice begins Jan. 24 - according to me, I need to get this problem resolved before renewing. My products will work after January 24? I have sent numerous emails to another area of support, but received no answers.

  It is interesting to note that I am successfully able to run the application on my Windows 8 HP PC CC. It shows all the intstalled apps and applications that are available for download.

  Best regards for any help on this problem.

  Karen

  This issue has been resolved via the Adobe support Chat option!

  NOTE TO SELF: read the forum posts and try to solve the problem. When this does not work, use the Adobe Chat support. I just managed to solve the problem in less than 10 minutes.

  When all else fails I suggest that others use chat support!

  Karen

• Message "Non-genuine Windows" &amp; Windows Update does not work after replacing the RAM.

  Hello

  I have a PC desktop HPE-170 a current running Windows 7 Home Premium SP1, which has been installed on the machine by the store where I bought it. It has been properly activated and has worked very well for 18 months or more.

  The other day it decided to not start and a computer savvy friend corrected the problem by removing the RAM memory cards, clean the gold plated connectors and re - insert the. This fixes the problem and it started again.

  Today I received a message on the computer of Microsoft saying "your copy of Windows is not genuine" and he invited me to "solve online. Well, click on the 'My Computer' icon showed me that windows was still active.

  By clicking on the "solve Online" link took me to a validation page, where after she tried to validation, it says "The Validation failed" and advised me to buy another copy of Windows 7 HP for AUD $149. Gee, thanks, but no thanks Microsoft. I clicked on cancel and the non-genuine message has not yet reappeared.

  I also found now that Windows Update doesn't work that way.

  I rang MS that says that I need the Windows 7 Setup disk. When I said that I don't have one, they advised me to ring HP. I didn't have time to complete the phone call from HP, but I believe that HP wants me to reset the system to factory with them State guide me by phone.

  I have a genuine copy of Windows, a product key, and it shows as activated.  From what I understand the system think that I tried to put my copy of Windows 7 on a new computer or similar? I'm not sure.

  Is it really difficult to get the system works just like before?

  Thanks for the reply.

  I'm afraid I don't understand your instructions. I think that you are a fair way waiting for me in the issues of tech savvy.

  I think I have stumbled upon something here; http://support.HP.com/us-en/document/c02219204

  Download and update this driver seemed to do Windows Update includes itself.

  I can now go here; realwww.microsoft.com/ /validate/ and he says: "Welcome to Windows".

  I hope I now get no more fake messages on my OS Windows is non-genuine.

  I'll see what happens tomorrow.

  Last update 18/7: seems to be fixed, no more problems.