Windows 7/vista and VLAN Tagging (802. 1 q) on VMWare Workstation 7?

Similar Questions

• HP Support Assistant for Windows 7, Vista and XP

  This is for all of you who are looking to find HP Support Assistant for different versions of Windows 7, Vista and XP.

  The link is http://h18021.www1.hp.com/helpandsupport/hp-self-support.html

  Installation luck!

  Hey, MKKhan.

  I see that you are having a problem Uninstall HP support Assistant, and during the uninstallation you get the message "Error 1316.

  The 1316 error is a common error message when you try to reinstall/upgrade to level a software (such as iTunes, etc.)

  Follow this document and go to the bottom of the page and run the fix they have posted which should look like this.

  

  Run this fix, it will ask you what type of program you are trying to uninstall. After you uninstall it through the fix, you can go ahead and install the wizard help again.

  Be sure and go to the HP website and download the current HPSA from there.

  Let me know the results of this step. If you have any questions ask me.

  THX

• The update wants to do a net framework 1.1 SP1 on Windows XP, Vista and windows server 2008 x 86. KB2656353 but can not. Why not?

  The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not.  Why not?  He simply has it again and again without updating.

  I finally got by a 'person' and he took over the computer.  It took almost 2 hours, but he finally managed to fix the problem and get the update installed.  Hooray!

• ARP expire for Windows XP, Vista and 7

  What is the exact value or ARP expire for Windows XP, Vista and 7, if the primary remote DHCP server is not available, then how long long time, it will release ARP and send DHCP broadcast again?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Can I use a printer HP Officejet 6310 on windows XP, vista and 7

  Original title: HP Officejet 6310 printer

  I have two computers, a desktop computer running XP Pro and a laptop running Vista.  I recently bought a laptop running Windows 7 64-bit.  Can I use a HP 6310 printer on all three?

  Hello

  Windows Compatibility Center shows that this printer is compatible with windows XP, Vista and 7. Drivers for all the operating system three are offered by HP, so you should be able to use this printer on all three OS.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• With the help of VLANS and VLAN Tagging is not working / no connection

  Hello

  I m trying to configure a VLAN between some virtual machines on ESX host 3.

  I want to do this way:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004074

  I got 1 dedicated NETWORK adapter to each ESX host that is connected to a dvSwitch in which I configured a portgroup

  with VLAN ID 2121. I have configured each virtual machine to use this network.

  When I put the virtual machines on a single host, they are able to communicate.

  When they are placed on different hosts they are (if the VIRTUAL LAN is enabled on portgroup) not able to communicate.

  So I m assuming it must be a problem in the config NIC on the ESX host or switch.

  I m using a HP2910AL on which I activated mode trunk for each port that is connected to a NETWORK card with

  the dvSwitch/Portgroup I try to use for the vlan. In the hp switch, I have a default VLAN with ID 1 where

  the Ports are marked not signposted. I install a second VLAN on the switch with ID 2121 in which I scored

  This tag ports.

  Is there something else to do - perhaps side ESX host?

  I tried changing the settings as "forged transmission-> allow ' on portgroup and I found other things

  in the web, but always without success.

  Kind regards

  Patrick

  Were you referred to this guide? :

  http://CDN.ProCurve.com/training/manuals/2910-ATG-Feb09-2-VLAN.PDF

  "show vlan ports" would be my next check to make sure that you have connected to your ESXi host 3 ports in the vlan 2121.

  As Duncan has said if you have a VLAN ID on the portgroup in the vSwitch and you have the port on the pSwitch as trunk not acess and VLAN ID is allowed on the trunk port pSwitch you should be ok.  Just to clarify the trunk is 802. 1 q No 802.3ad.

  The reverse is not VLAN ID on the portgroup vSwitch, use coelio on pSwitch with VLAN ID.  Limited pSwitch port to a VLAN, this may be ok for you?

• Guest Windows always opens at 640 x 480 after restart of VMware Workstation?

  Whenever I do this sequence of operations, my guest operating system comes in the resolution of 640 x 400 lean instead of the usual 1400 x 1050.

  1. Stop or suspend my Windows prompt (Windows XP Professional SP3)
  2. Leave VMware Workstation (version 10.0.1 for Linux)
  3. Restart my Linux (Ubuntu 13.10) host
  4. Restart my Windows XP guest

  This happens even if I simply suspended the guest (as opposed to closing) before the quit/restart.

  It did not used to happen; as in recent months.

  At the same time, I run a Windows 7 guest in another tab (if it goes through the same procedure), and it comes in full resolution.

  Any ideas? My vmx configuration file is attached.

  I solved the problem by downloading QRes and running in Windows XP prompt:

  "C:\Program Files\QRes\QRes" / x 1050 1680/y

  This has not only changed the resolution once again, it seems to have solved the problem completely each time you start.

• Running the VCS 4 and ESX 4 and computer virtual on a PC using VMWare Workstation 7.01

  Hello

  I could not install on my PC Windows 7.01 vCenter. I was getting a "28035.Setup error". I was told that you can run vcs on a virtual machine, so I decided to create a machine virtual W2K3 just for my VCS. I have 1 VM ESX 4.0 and 1 VCS 4.0 VM on my PC. I'm using VMWare Workstation 7 to join my VM and vSphere Client on the desktop. How can I run VCS? Normally, it will show on vShere customer. Do I need to reinstall from the CD of vCenter? Any ideas? Thank you.

  When I try to add my vcs on the domain controller server

  I don't understand exactly what you are trying to add?

  Basically, what you need to run a test environment is:

  -a domain with DNS controller and - if you want - DHCP

  -Member Server windows on which you are installing vCenter Server

  -one or more host ESX (i)

  On your client, you must install the vSphere Client and connect to the server vCenter Server by using your credentials of the AD. Using the vSphere Client, you can add hosts ESX(I) and your installation configuration.

  André

• Camcorder JVC Windows says vista and XP ' device unrecognized try another usb port if it doesn't have a replacement device.

  Model of camcorder JVC GZ-MG50AA

  computors on XP sp3 and Vista laptop. Both give the same message when the camera connected to download videos and pictures.

  Hi Davo1957,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to connect the device to a different USB port and check if the problem persists.

  Method 2: There are chances that the USB cable may be defective. You can check the device connection through different threads.

  Method 3: You can run the Microsoft Fixit from the following link and check if the problem persists.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 4: You can follow the steps in the Microsoft Knowledge Base article and check.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

   

  Method 5: Install the drivers updated and chipset for the device and check the results. You can see the article mentioned for more information below:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know if that helps.

• ISA550W with multi SSID (each having separate DHCP and VLAN tag)?

  ISA550W can do the following (in order):

  (1) first group interfaces physical and Wi - Fi SSID (s) set

  (2) then assign with DHCP (ip or subnet)

  (3) then add a tag VLAN interfaces and SSID (s) wireless

  (4) repeat 1 to 3 for the remainging and SSID (s) wireless interfaces to create the following diagram:

  

  (1) I believe that could transform these ports in ports of junction. That said, I'll normally in the ports themselves through networking, change them to the Trunk ports and add the appropriate VLAN. Please keep in mind that as a general rule which present you to a Trunk port is another switch. Then you EF the VLAN appropriate to each switch coelio that attach a device such as a workstation. There are some devices that do not support be connected to a Trunk port, like the OnPlus of Cisco device however.

  (2) think SSID that only access ports. Because you could never connect a device that would support Trunking wireless, you can apply only 1 VLAN by SSID wireless-> basic settings.

  (3) because the SSID cannot be interconnection. See #2 above for configuring the VLANS on SSID.

  Sent by Cisco Support technique iPhone App

• Upgrade to Windows 7, Vista, and my Lexmark X 5470 printer was not and could not print. Site gave a download for Win 7 compatibility with which I tried to do, but it still does not work. Any ideas?

  With the help of a Media Center PC HP Pavilion.

  solution uninstall the lexmark program
  Download this file: http://support.lexmark.com/index?page=content&id=DR7353&actp=search&viewlocale=en_US&userlocale=EN_US+&segment=DOWNLOAD&productCode=LEXMARK_X5470&searchid=1257910229479
  Right-click on it (after downloading) and click on properties, then click on compatibility, then choose run this program in compatibility mode for windows vista service pack 2 and click ok
  now run the program and follow the directions.
  print the test page and "walla".

• Uninstall Windows 7 bootcamp and then install a new custom build desktop (workstation)

  My macbook memory is full and cannot breath

  So I need to remove my Windows 7 in boot camp.

  I intend to build a new machine,

  running on windows 7.

  I was wondering what the process

  especially about the product key for activation

  When I remove and install on a new machine.

  What should I do?

  Can I do this?

  Thank you

  See:

  Boot Camp: Remove Windows from your Mac - Apple Support

  Proceed to install the license on your new computer and reactivate by phone:

  Install, upgrade, and Activate - Windows help

  Boost telephone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Computer virtual configured NAT on a host of authentication 802. 1 x (VMWare Workstation)

  This setting works, if the host is not authenticated and the 802 network port. 1 x open mode. It also works, if the virtual machine is in bridge and the virtual machine is authenticated with the 802. 1 x parameter or in the LAM. But as soon as the host is authenticated with 802. 1 x and the VM is configured in NAT, if I restart the VM, it no longer works.

  I know that it is better to have all the VMS to authenticate to the network, but I want to know why it doesn't work?

  Sorry I found the answer! NAT and DHCP options was remove with the deployment package.

• Where can I download an evaluation version of Windows XP, Windows Vista and Windows 7?

  Hi, I'm doing a Comp TIA certification course has + and my teacher said he wants to make us a copy of Windows XP, Vista and Seven evaluation. Now the problem is that I don't know exactly what he means by that, but I guess he means a trial version. Could someone send me a link for the download and evaluation of operating these systems copy and tell me whether it is a trial version it wants, I tried searching Google for copies of evaluation of these systems but not had any luck with Vista and XP that I only got a trial version of Windows 7 Enterprise.

  As mentioned, the trial version only of Windows that is available is the Windows 7 Enterprise 90-day trial and testing of Windows Server 2008 R2.

  I have a Windows Server 2003 180 days trial version, but it came with my system administrator Guide book.

  I also have a 60 day trial of Windows XP Professional version, but it came with a bunch of software eval when Microsoft was the promotion of Windows Server System, it is quite rare to come across her, 9 years ago.

  Vista did a test of the company in 2006.

  When I made CompTia A + my instructor provided these resources for me.

  The best way, you can get these is to use existing commercial discs.

  Windows XP Professional with Service Pack 3 requires no activation required, nor does Windows Vista. Another option is to invest in a TechNet standard.