Running the VCS 4 and ESX 4 and computer virtual on a PC using VMWare Workstation 7.01

Similar Questions

• TypeError: try to run the script compilation and go on a 'mistake' in scope cleared when message returns the transfer through images for each image. Does not affect viewing.

  TypeError: try to run the script compilation and go on a contour

  Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)

  -> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working.

• I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  Hello

  Contact the Support of IDM in this regard.

  The link there is a Support tab on the top right > run the mouse cursor over them for the Support Options > 'how to use IDM.

  http://www.internetdownloadmanager.com/download.html

  See you soon.

• I try to run the security essentials and it tells me that I'm missing msvcp90.dll

  I try to run the security essentials, and he tells me that I'm missing msvcp90.dll. Same problem occurring with a real player has not re - install. How can I recover file?

  Hi BradleyMitchell,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what version of Real player installed on the computer?

  Msvcp90.dll error can be caused if the Visual C++ Library Runtime components are missing or corrupt on the computer.

  Method 1

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2

  If the previous step fails, then install the Package redistributable Microsoft Visual C++ 2008 and check if it helps.

  Microsoft Visual C++ 2008 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  You can also post your request in the Microsoft security essentials forums using the link below.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start

• Lets run the multilingual method and input of blackBerry Smartphones

  I've updated the 7.1 os and it took me to multilingual method and input. I had once managed a whole upward. in any case, it seemed now missing on the phone, and on the desktop PC does not show language. I did remove the OSI and reinstall, the the same problem. I want that it multilingual and other language input method. Any suggestion? Please take note.

  OK... that now makes sense... the automatic method detects your BB and the level of operating system installed, but is not able to download correctly what it needs from the Internet to continue. And the Red Star means that there is an update, he wants to offer you, but again he has trouble to download what suits him.

  So, what you need to do is to defeat the automatic method and force instead of things. The easiest way is, on a PC (you can not do on MAC):

  1) uninstall all the BB OS packages from your PC,

  (2) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/apps-software/desktop/?lid=us:BBsoftwareesktopSoftware & Cal = us: bbsoftware

  (3) download and install to your PC, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If you want to just reload your current version, you can access your carriers download portal and get the same exact package you are already running
  • • KB23393 How to check the model number and the version of the BlackBerry device software on a BlackBerry smartphone
  • But if you want to go for an update, you can see what your company has, or you can dig into all of the companies that support your specific model BB number and compare versions of each provision.
  • Also consider this information as you choose your BB OS package:
  • • KB05305 Location of support for BlackBerry smartphones

  4) remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (5) run the Desktop software and connect your BB

  If you chose to update your BB OS, then the software should immediately offer the bundle of BONES that you have installed on your PC, before you can do anything else. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  If you have chosen your BB exact same OS package that is already running on your BB, then you should be able to proceed with the installation language you want (assuming, based on the location of KB, you have installed the right BB OS package that includes the language of your choice).

  Do not forget to save.

  Good luck and let us know!

• I get this error message on photoshop cs6 "one or more files in the Adobe Application Support folder necessary to the operation of photoshop are missing. ' Run the photoshop Installer and re-install photoshop. Could not help people talk to adobe. Does Any

  I get the following error message when I open photoshop cs6 "one or more files in the Adobe Application Support folder necessary to the operation of photoshop are missing. ' Run the photoshop Installer and re-install photoshop. Chat room Adobe could not help. I don't have a disc - it has been downloaded online. Does anyone have a suggestion?

  Hello

  Try re-download Photoshop CS6 license with your serial key and the link below:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

• You will need to run the script for some ESX hosts.

  Dear team,

  I m connected to 4 esx host, but I want to run the script only 2 esx host asking you to help me how to do?

  concerning

  Mr. VMware

  You could start the script with the cmdlet Get-VMhost to select only the two hosts that you want to output to. For example:

  Get-VMHost host1, host2. Get - VM

  Displays only the virtual machine running on host1 and host2.

• Just DLd CD player. Now, nothing will be printed. I also get error app for Windows (0xc0000022) whenever I start CD player. I uodated download of the last update and tried an auto repair. Using Win 7 Pro 64 bit machine.

  Just DLd CD player. Now, nothing will be printed. I also get error app for Windows (0xc0000022) whenever I start CD player. I uodated download of the last update and tried an auto repair. Using Win 7 Pro 64 bit machine. I tried several printers and I can test printing from other applications such as Outlook and Wordpad.

  None of this has worked. I have to get rid of the error (0 x 000022) and he got good printing. I did clean the Adobe Reader DC machine, reinstalled drive XI 11.0.10 and in the preferences to disabled Adobe protected in Security (Enhanced) Mode and set "view documents I have PDF/A mode" forever in the Documents tab...

  It seems that each player version as it becomes more complex (with the "features enhanced security") gets more unstable.

  I'll try Adobe Reader DC when I eventually have to WIN 10 which is never if all goes well.

• I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask fo

  I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask you to please provide me with the version complete.

  Did you buy the full version or an upgrade?

• You try to run the scan mode and mode interface fpga at the same time is causing errors

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:
  
  Open FPGA interface reference.
  Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »
  

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  rex1030 wrote:

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

  1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

  2. right click on the frame element and select deploy.

  3. repeat your VI.

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141

  
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:

  Open FPGA interface reference.
  Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

  The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

• Problems running the check disk and disk defragmentation

  I tried to throw a disc defrgmentation and I ask rubbing a disk check I don't know how. I tried to go to the Run comand.com, which is written ' chchdsk/f' and tells me that it is a function of "read only". My system information, it says I have Service Pack 3. Help, please. Everything else works fine.

  When you run chkdsk /f in the command prompt window, you should see a message like this:
  The type of the file system is NTFS.
  Cannot lock the current drive.
  Chkdsk cannot run because the volume is in use by another process.  You want to schedule this volume to be
  checked on the next reboot of the system
  ? (Y/N)
  If you answer "Yes" by typing Y, chkdsk /f turns to the next boot XP (or he will try to run).
  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do it yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run, and in the box enter (or copy and paste):

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Look in the Application log for a recent event proposed Winlogon, and it should look like this:

  Event type: Information

  Event source: Winlogon

  Event category: no

  Event ID: 1001

  Date: 04/08/2010

  Time: 11:25:57

  Description:

  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You

  may cancel the disk check, but it is strongly recommended

  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.

  CHKDSK checks Usn Journal...

  Audit of the USN Journal is complete.

  39070048 KB total disk space.

  28017948 KB in 100571 files.

  56540 Ko 10556 index.

  0 KB in bad sectors.

  236440 KB in use by the system.

  65536 KB occupied by the log file.

  10759120 KB available on disk.

  4 096 bytes in each allocation unit.

  9767512 total allocation on the drive units.

  2689780 allocation units available on disk.

  Windows has finished checking your disk.

  Please wait while your computer restarts.
  If your report has errors, you may need to run chkdsk /f again until the report indicates no error.  If you get errors, then your hard drive may be failing.
  If you want that take us a look at your report of chkdsk that you see in the event viewer, you can copy it to the Windows Clipboard and paste it back here like this:
  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis
  .  Remove personal information from your information
  After having stuck if you are forced to do so.
  If you paste an event, it will look something like this annoying system startup event:
  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer
  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.
  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error message in another language when you try to run the perfect world and Forsaken World

  Hello everyone I have a problem that I've been up to this unable to solve, and I hope someone here can...
  in the last month or more I tried to run the following games perfect world and abandoned managed both by entertainment world perfect but continue to receive the error message, http://i187.photobucket.com/albums/x7/steven2601/fw.jpg

  and seems to be able to resolve the question pls help

  the game is the English version, but apparently it was based on the Chinese version, when they converted or something I don't know about this in any case I installed all the Japanese and Korean language Chinese packs and the message is always out the same... However, I took a radical and simply implemented measure to upgrade to windows 7 now here's the funny thing I didn't redownload the game then I copied the installed folder of vista on my new installation of windows 7 and he ran right away I would have thought with it being installed on 1 OS, then copied to another , one that would give an error message... anyway problem solved but thnx for answer and enjoy my little story :)

• You try to run the system restore and get this error__unexpected error filename directory or volume label syntax incorrect (0x8007007B) __What can do?

  Try to run system restore and get this error
  error unexpected filename directory or volume label syntax incorrect (0x8007007B)
  What can I do?

  Hi Larry Bogie.

  1. you receive error message when creating point system or performing system restore?

  2. did you of recent changes on the computer?

  Usually, this would happen if there is any place in doubles in the system restore properties.

  To set the path of the appropriate Windows Vista restore point as follows:

  (a) click on the Start Menu.

  (b) type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.

  (c) click continue.
  The System Properties window appears.

  (d) click the System Protection tab.

  (e) to the automatic restore points, uncheck the any location invalid or duplicate

  (f) click to check drive C: with the Windows Logo.

  (g) click on apply, and then click Ok.

  (h) restart the computer and check if it works.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Where can I find documentation on how to get the VCS - C and VCS-E to Exchange presence information

  I turned presence on my VCS - C and VCS-E, but depending on whether I am VPNed or not, I don't see the State of the presence of my side of the firewall.

  I checked for x7.1 Administrator's guide, I looked in the guide of authentication devices, and I'm at a bit of a loss.

  Is what I'm trying to do as possible, and if so, what do I have to do to make this work?

  I have a pretty simple setup - that works very well, could give you some ideas;

  Two VCS - Independent C (soon to be clustered) and a VCS-E;

  all internal clients of the JabberVideo register with a VCS - C, and when external registers with the VCS-E (all of my users of Singapore recorded with the VCS-E).

  Authentication is directly with AD and is made on the a WHAT VCS - C regardless of the user is registered with the VCS - C or the VCS-E.

  PUA and presence disabled on VCS-E and activated on the VCS - C, which is used as SIP registrar.

  Authentication on VCS - e:

  Default subfield "do not check".

  Default zone "do not check".

  Traversal server box "do not check".

  Authentication on VCS - C:

  Default subfield "audit powers.

  MOVI area 'audit powers.

  Point final SIP registration box "treat as authenticated.

  Course customer area 'audit powers.

  Authentication works well, the users cannot sign up for the VCS-E with the wrong password or user name, and presence works well too - both inside and outside.

  /Jens