Camcorder JVC Windows says vista and XP ' device unrecognized try another usb port if it doesn't have a replacement device.

Similar Questions

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows says no audio output device after you install windows 8 pro in my desktop computer.

  * Original title: sound problem

  After you have installed windows 8 pro in my desktop my windows says no audio output device is installed, I am already updated my audio driver in Device Manager, but its cant work, I'm also controls to restart windows audio in services.msc you please try to help me solve this problem

  Hello

  Press the Windows key + R to open the run

  Type dxdiag

  Click Ok

  Click on the sound tab

  If the drivers have been omitted you won't see a name only no Loaded device

  If you do not see a charge device click Test DirectSound

  If the Director plays with sounds, but you can not hear, check your speakers that can be turned off, disconnected, or broken.  Verfy pregnant are very good.

  Click Exit

  If the speaker is fine, go to the website of the manufacturer of your sound card and search for updated drivers.

  Download and install the drivers.

  Return to the screen of dxdiag and repeat the test for sound

  Click on the help tab if still problems

  Windows will guide you through more tests

• HP Support Assistant for Windows 7, Vista and XP

  This is for all of you who are looking to find HP Support Assistant for different versions of Windows 7, Vista and XP.

  The link is http://h18021.www1.hp.com/helpandsupport/hp-self-support.html

  Installation luck!

  Hey, MKKhan.

  I see that you are having a problem Uninstall HP support Assistant, and during the uninstallation you get the message "Error 1316.

  The 1316 error is a common error message when you try to reinstall/upgrade to level a software (such as iTunes, etc.)

  Follow this document and go to the bottom of the page and run the fix they have posted which should look like this.

  

  Run this fix, it will ask you what type of program you are trying to uninstall. After you uninstall it through the fix, you can go ahead and install the wizard help again.

  Be sure and go to the HP website and download the current HPSA from there.

  Let me know the results of this step. If you have any questions ask me.

  THX

• The update wants to do a net framework 1.1 SP1 on Windows XP, Vista and windows server 2008 x 86. KB2656353 but can not. Why not?

  The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not.  Why not?  He simply has it again and again without updating.

  I finally got by a 'person' and he took over the computer.  It took almost 2 hours, but he finally managed to fix the problem and get the update installed.  Hooray!

• ARP expire for Windows XP, Vista and 7

  What is the exact value or ARP expire for Windows XP, Vista and 7, if the primary remote DHCP server is not available, then how long long time, it will release ARP and send DHCP broadcast again?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Can I use a printer HP Officejet 6310 on windows XP, vista and 7

  Original title: HP Officejet 6310 printer

  I have two computers, a desktop computer running XP Pro and a laptop running Vista.  I recently bought a laptop running Windows 7 64-bit.  Can I use a HP 6310 printer on all three?

  Hello

  Windows Compatibility Center shows that this printer is compatible with windows XP, Vista and 7. Drivers for all the operating system three are offered by HP, so you should be able to use this printer on all three OS.

• Windows 7/vista and VLAN Tagging (802. 1 q) on VMWare Workstation 7?

  Hello

  It is possible to activate the tagging VLAN in a virtual machine running Windows 7/Vista on VMWare WorkSation 7?

  I have which must be executed in a VLAN from diferent VM. In my case I use 802. 1 q in a bridged interface.

  Thank you

  Pato

  Perhaps.  If you configure your client to use a virtual Intel e1000 NETWORK card, then you could install the Intel NIC drivers within your comments... I think that the drivers Intel supports VLANS.  But I have not tested it myself.

• I have a Logitech USB 350 and Windows 7 headphones not not even seen in any USB port

  Recently, I built my new system and installed Windows 7 Home Premium 64-bit.  I was using my Logitech USB Headset on my previous bench which was under Vista without any problems.

  After all the installations and updates, it was time to see what games and Movies looked and sounded like.  I plugged my faithful helmet in a USB slot... and nothing happened.  And I hear nothing.  My system is not same recgonize that nothing is plugged into the USB port.  I tried other 8 available USB slots and got the same results - absolutely nothing.  And Yes, all the slots work. Connect any other device (external hard drive, Memory stick, etc.) each any every site works very well.

  Plug the headphones on another computer running XP. It is recognized and works perfectly.

  Back to my new PC, open the control panel with the connected headset and go to the appropriate screen - I see my speakers and Realtech Audio, but no helmet, no unidentified device, nothing.

  The compatibility section of this web site confirms that this helmet is AOK with Wndows 7.

  So, anyone have any ideas?  Any help is greatly appreciated.

  I'm having the same problem. Never understand you a solution?

• Hi, my Aspire Z5600 is stuck on the Windows re - screen and I can't use the USB keyboard screen

  Hi, I hope someone can help with a problem I have with my Aspire Z5600 all in one computer. I can't restart the machine because it is blocked on the page re-loader of Windows when I try to reboot.

  The screen is grey anthracite dark with white writing and gives me two options, to select one of the options that I would need to use the arrow keys on the keyboard and press ENTER to the action of the selection. The problem is fashion seems to be invalid the USB ports and the touch screen, so I can't select and option of each key board or screen and it will not pass, is just stuck on the screen, making the computer unusable.

  Can someone give me a solution to remedy to this problem please?

  USB should work even in this form, have you tried another keyboard?

• Wireless Xbox 360 Controller for Windows all of a sudden not connect into any USB port

  Original title: Wireless Xbox 360 Controller for Windows issue.

  Hi, I bought this back in 2008 and it has been flawless since today... I tried to use it and the controller is unable to connect to the receiver.

  There is no light on the receiver, even when I plug it into a different USB port there is still nothing... I even tried another computer. I assume the receiver is nakered?. Can anyone shed some light on this?

  If the receiver is so broken, can I buy this receiver on its own and that it will be compatible with my wireless controller Xbox 360 instead of having to buy another expensive controller...

  Thank you very much.

  Hello

  I suggest you to post your questions or comments about the Xbox 360 Forums, so that you will be provided with the assistance of your Xbox 360 product.

  Link: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Hope this information helps you.

• All USB ports not working doesn't no causing of mouse and keyboard doesn't work either (considered the source of the problem). Need help fixing without using the mouse or the keyboard.

  None of my usb ports work, and I can't get my mouse and keyboard to respond.  The computer will start, but none of the usb ports work, and I don't have the use of a mouse or a keyboard works through all the patches.  Help!

  I have PS/2 ports, but no mouse PS/2 or a keyboard... did not have those last few decades and don't know anyone who has these features more

  $6.36 (free delivery if you have Amazon Prime, otherwise on $11 including shipping): http://www.amazon.com/V7-Standard-PS-Keyboard-KC0A2-4N6P/dp/B007R9YV0C/ref=sr_1_1?ie=UTF8&qid=1372529682&sr=8-1&keywords=ps%2F2+keyboard

  during boot, or perhaps in Safe Mode

  Assuming that your keyboard works during boot (and it should; trying to tap F8 to access Advanced Boot Options Menu), probably the simplest method would be to make a Hiren Boot CD, boot from it and use one of the many included tools.  I have not experienced with your particular situation, so I can not tell you what tools will be or will work for you, but my guess is that USBDeView might work.

  Description: http://www.hiren.info/pages/bootcd

  Download and burn (copied from ElderL):

  Download the Hiren ISO here (download important enough but worth it).

  http://www.hirensbootcd.org/download/

  I like to use ImgBurn to create a bootable ISO CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask Toolbar (ever).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  Thanks for all the help. Seems that there is no easy 'reset' for bad hardware configurations.

  However, I dug to the bottom of my Lac 'tech' and found a USB-to-PS/2 adapter, which allowed me to use the USB mouse into the PS/2 port and reactivate my USB ports.

  All is well now.

  Thank you all for your answers!

  Kind regards!

• I reinstalled windows xp.sound and audio devices say there is no audio devices installed.

  Device Manager displays multimedia audio controller, sm bus controller and video controller with yellow? and under properties all say device not configured properly.i I'd appreciate any help, thank you

  Hello clarksdad,

  It seems that you have not installed all the drivers after your new installation.

  Try to install the drivers for chipsets motherboard from the CD driver provided by the manufacturer/supplier of your PC.

  And then you continue with the installation of drivers VGA and Audio.

  For the most part, all these drivers come packaged with the CD provided by the manufacturer/supplier of your PC.

  Thank you and best regards.
  Roger

• When I attach my USB to one of my USB ports, I get a message that says "unknown device". However if I plug my mouse and my keyboard in the same USB port it works fine... What do I do? Need HELP I have the info out of my flash drive...

  I need to download a driver?

  It would be difficult to say that you haven't told us the manufacturer and model of the flash player.
  Neither you told us what version, edition and level of service pack of Windows® you are running.
  All of the above information is important to answer your question!

  Please note, however, that in Windows® XP Service Pack 3 , drivers are not necessary for newer flash players.  If you have not upgraded to the SP2 minimum, you can have trouble reading flash drives.  Download and installation of the SP3 may solve your problem.

  In addition, your hardware supports USB 2.0?  If this isn't the case, you may need to install a separate USB controller to use flash drives.  See the documentation for your system.

  If you have SP3 and your hardware supports USB 2.0, answer these questions and we will take it from there...

  No member of this forum is omniscient.  You just have to tell us about your hardware.  
  In addition, Please read KB555375 - how to ask a question

• I tried to update my laptop (windows vista) and every time I try the error Code: 80072EE2 presents itself, how can I?

  I recently had to re - install my disk boot, because for some strange reason, it wouldn't work. But I fixed that, he places the first version of windows vista. I tried to connect to the internet, but I couldn't because the original software did not support wireless, so I had to update, but I couldn't go without an internet connection. I am connected to internet via ADSL and it worked... but still can not update because the error Code: code 80072EE2

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx