Windows 7 will not activate reinstall after Asus M3A Council.
Recently, I did a reinstall of costs of upgrading windows 7 on an Asus M3A mother card. When I tried to do the validation, it is not accepted. This license from a windows 7 upgrade kit 3pk @ Walmart I bought shortly after the release of windows 7. I had no problem with the original installation but having moved and the system being stored for about 2 years, I thought I would clean the system with a new facility. This update was conducted from Windows XP that was originally installed on the card. I've updated the processor, memory and bios over the years. I do a reinstall once before long after the upgrade and had a similar problem. In this case, I had to go back to older BIOS and CPU that was in the system when I did the initial upgrade. I took some of the old avalible yet bios from Asus but do not have the original CPU. Attached are the results of the windows validation tool. Any ideas? I also tried the route to reinstall windows XP by using the original XP license and then done installing windows 7. No luck.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - WT6R8 - 6327 K-GWWKG
The Windows Product Key hash: Gmsv/jf + QoTK9qcNbahxLaD0eU =
Windows product ID: 00359-030-4975712-85824
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {1F86B26A-08E7-476B-B899-EA720352BF6E} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7600.win7_rtm. 090713 1255
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
Other data-->
Office details:
Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385
Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00170-030-497571-01-1033-7600.0000-2672015
Installation ID: 022112811074556642838793008526244620559831615076826121
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: GWWKG
License status: initial grace period
Time remaining: 39300 minute (s) on (27 day (s))
Remaining Windows rearm count: 3
Trust time: 27/09/2015-17:54:02
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:
--> HWID data
Current HWID of Hash: MgAAAAEABAABAAEAAAABAAAAAgABAAEA6GHwqmY1uJGQpsgiejnCq/hqHMUq06 plus 7qJw
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
OEMAPIC 040208 APIC
FACP 040208 OEMFACP
HPET 040208 OEMHPET
MCFG 040208 OEMMCFG
040208 AMI_OEM LASRYVITRAGE
You should try the phone activation.
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with
activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
Tags: Windows
Similar Questions
-
XP will not activate / validate after reinstall the original pc
my windows xp must be reinstalled after lightning struck this weekend. I used the origanal windows disk to reinstall everything. The thing will not activate. I would like to talk to someone live as you used to be able to. I'm back 53 and on a fixed and cannot afford a new pc or OS of the computer came with Windows 98 origanaly is and I update to XP home in 2003 I believe. It is an old machine, but keep intouch with my children emails is very good. Any help would be appreciated.
You will find instructions on these pages:
http://support.Microsoft.com/kb/950929
http://support.Microsoft.com/kb/307890
http://pcsupport.about.com/od/osproductkeys/SS/change-Windows-XP-product-key_10.htm
-
Windows 7 will not activate with the OEM key, after the failure of HARD drive.
Hello
I was recently asked to repair my brother DELL laptop. The HARD drive failed and the system unusable. I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media. The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.
The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid. I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case. The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.
I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).
Any help would be greatly appreciated!
Thank you
Brian o '
Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - QCPVQ - KHRB8-RMV82
Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
Windows product ID: 00359-OEM-8992687-00095
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130104 - 1431
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{AC8177E3-D2B0-45ED-B79B-E129894262D3} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-RMV82 00359-OEM-8992687-00095 2 S-1-5-21-1225630707-1574482703-4192685535 Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F8 0409 0409 Time(GMT-05:00) Standard is 0 3 DELL WN09 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
Installation ID: 004806170012218410865063155553272544088463952332351022
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: RMV82
License status: initial grace period
Time remaining: 43080 minute (s) on (29 day (s))
Remaining Windows rearm count: 3
Trust time: 31/03/2013-02:23:35Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbKActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL WN09
FACP DELL WN09
HPET DELL WN09
MCFG DELL WN09
WN09 DELL SLIC
OSFR DELL WN09
SSDT PmRef CpuPmyou use an OEM SLP key that only works with the manufacturers recovery media.
change the product key to that on computers of COAClick Start, type slui3, press ENTER.Additional information:
Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:
OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)
COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)
-
Windows Vista will not activate after I reload.
* Original title: Windows Vista
Hi, I had to reload Windows Vista on my laptop that has been loaded correctly. My problem is that it will not activate its telling me the code and I need to get another.
This software is used only on my laptop so why wont he accepts the code, can someone help me with this please?
Thank you
Hello
Do the activation of the phone and hold on to explain to a real person it's a reinstallation on the same laptop you do.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Windows Vista will not be validated after clean install
Windows key, title: product original vesta H P,.
buy windows key, product vesta p h, it will not be validated after a clean installation, only to discover, to upgrade only, that cost me $ 160 in two, three years ago, can aney help, how to fix this, davie.
Hi David,
Install and activate the original operating system provided with the computer first (I guess it's XP).
Update to upgrade to Vista, then use the Vista product key that you used at the time to update (because it works now as you WILL upgrade and do not try to install only a facility full after an installed clean).
Good luck!
Kosh
-
Windows 7 will not activate after a clean install and several improvements to my computer.
I bought a copy of Windows 7 Home Premium 64-bit. I installed my old hardware running, but found Windows 7 either too many resources. When there was enough money kicking around to upgrade my computer a few months later I did (new card mother cpu and ram). Windows 7 would not start normally or in safe mode, my old installation of XP would not boot normally but would start in safe mode. So I reinstalled Windows 7 with a clean install (reformatted my hard drive) and it works fine but now it won't turn on! It says that I have to type in a different product key because I typed the product key cannot be used to activate Windows on my computer.
I understand the need to fight against piracy, but the thought that I can't upgrade my computer without having to buy another product key is ridiculous! There are solutions to this problem?
Activate manually. It is detect your previous installation and seeing this as an attempt to install the product on another computer. It is a common phenomenon.
To activate manually, go to start, search, and type in slui 4 enter. Enter your country and press Next. You will be on a screen with a phone number and a bunch of codes below. Dial the number and browse automatic guests until you get to a human being. Have your handy product code because it will be asked. Explain the situation, but it's the same PC and only installed on this PC. They should give you a code to enter on this screen to activate the operating system.
I hope this helps.
Good luck!
If this does not work (these procedures are for Vista, but I guess they will work with Windows7), and then republish your questiion in Windows7 Forums:http://social.answers.microsoft.com/Forums/en-US/w7install/threads where they can provide the procedure for this OS if it is different.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Windows 7 will not activate after a hard drive failure
I tried the phone activation option and it will not work. IM assuming that it's because I reinstalled windows once before, the upgrade from 32 bit to 64 bit. Im not sure what to do and id prefer not to buy another copy of windows. My computer specs are as follows:
OS: Windows 7 Home PremiumMotherboard: Asrock Z77 Extreme 4CPU: Intel Core-i5 3570 kGPU: NVIDIA EVGA GeForce GTX 560 TiHelp, please! Thank you!Use the phone activation:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Windows 8 will not activate after Windows 8 PC Refresh? Help, please?
We recently got a new windows PC 8, we had some network problems, so we have refreshed the PC to the factory settings. When he returned, he said he had to turn on PC, of course we do not have a key to use, as the laptop came with windows 8 on it. When I go to activate windows in the settings, it says: "error not found Activation Description." I don't have any idea what to do. When I try the thing ' Slui.exe 4' they ask me for the things of this ID, which, of course, I didn't, because it says not found description of ideas?
Hey Asim,
I'm sorry to know that you can not activate Windows.
1. don't you get an error message when you try to activate?
2. don't you refresh, Reset or any other hardware or software fact replaces the PC before the show?
Follow these items to solve problems on the issue.
Why can't I activate Windows?
http://Windows.Microsoft.com/en-us/Windows-8/why-activate-WindowsGet help with activation errors
http://Windows.Microsoft.com/en-in/Windows-8/activation-errors
Kindly, answer us with more information to help more.
-
Windows 8 will not activate after 1 year of service
Purchased a HP Desktop for over a year and it came with Windows 8 (not happy) and it worked fine until a week ago. All of a sudden when I turn on PC, I get a window that makes me go to the PC game up and says Windows will not turn on, please try again later or contact MS help. At the same time all products Office has stopped working and I cannot print pdf files either. Recent activity that can be connected; Norton came on PC but I never signed, I signed up 2 weeks ago. Norton does not feature anti-adware so I also loaded System Mechanic. I had to because my machine had become infected with adware which was causing slowdowns and annoying pop ups. How to solve this problem so that Windows is reactive?
A few other items of interest:
I always had problems with the download of updates to TurboTax for Windows updates, sometimes work, most of the time not. Usually, it will look like this works, but progress will be zero for hours if let you it go.
Thank you for your help.
First of all:
Try to do a system restore before you start who encounter this problem to see if it corrects the problem:
System Restoration - how do in Windows 8 - eight Forums
If the problem persists, try the phone activation:
Help with the activation process, contact technical support.
-
Windows Defender will not activate in Windows Vista
I use windows vista and after I bought Norton 360 and put it on my HP laptop... whenever I wish my PC it seems there is a problem with windows security. When I open my windows Defender would emerge but let me enable it by running the update for it. Now it lights up at all... I get a message that windows security is unable to activate windows defender on please try again later... more later she just said and did the same thing and will not let me install another version of windows defender... OH one thing... after having installed Norton on this laptop as well as my other more old or my CD/DVD burner drivers works not at all... will not read a disc at all... what happens?
You should never have 2 versions on any antivirus installed on your computer, or 2 different AVs installed.
It will cause problems.
I suggest that solve you your Norton anti-virus to address any problem of CD.
http://www.Symantec.com/support/index.jsp
Contact the Norton Support.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.
Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.
If it's not:
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off
Turn Windows Defender on or off the information on the link above of Microsoft.
Hope the above explains the common compatibility issues with Windows Defender and other security programs.
See you soon.
Mick Murphy - Microsoft partner
-
Installed a new hard drive and now Windows XP will not activate.
Resettlement on new disc
Hey there-
I bought a new SSD, had it installed and installed Windows XP by using a Setup disk I had laying around. He wants to be activated (even if the original installation is always on the computer, but on the 'slave', non-Boot drive). When I try to use the activation code that was on the original hard disk, it will not work. On the last 10-15 years, of which several were recovered for parts, I bought at least a half dozen computers with Windows XP (i.e., I have many more devices running Windows XP licenses). I tried to enter codes Activation of certain decisions which have been taken down, and I can't at work either one of them. I tried to use dial-in Activation (by entering the installation of 54-digit ID), with no luck as well. Is it possible to get it work?
Thank you
The fSomething to try...
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person. -
Our computer crashed, then we realised the motherboard was faulty, then we replaced. After starting the computer, everything went well, windows said to activate before it could begin. We went through the activation by phone, but he said, that he could not activate. We have not changed anything in the computer except the motherboard, is there a way to get this reactive?
As Noel mentioned, if the XP is initially pre-installed on this PC, it is an OEM version and is linked to the computer (specifically the motherboard of the PC).
However, if it is not an OEM version, while the question is perhaps that you have to re - activate by phone.
If none of these scenarios fits your specific problem, so please follow post Christmas how view a diagnosis report
Thank you
Darin -
Windows XP will not activate.
Starting a box appears on the screen and Windows asks me to activate, when I do this another box comes up and says that Windows is already activated. I now have four days to activate Windows XP.
It was a new update in a store, and yes a new motherboard has been implemented with only a few weeks. What is this business of piracy? This copy was placed in the shop and I used my original disc number I had in my old machine for a while?
What we say here that XP original and the number isn't good and everytime I update, I have to buy a software from Microsoft?
This means you are trying to install an OEM of Windows version which was provided by a computer on another computer manufacturer. A new motherboard is classified as a new computer and will not work.
-
Hello
I have a Windows 7 Pro OEM from a friend of mine that I installed on my laptop a few months ago. This machine died and I had to replace it with a new desktop PC. I installed the same copy again, but it will not be activated. This old machine is over now and I use hard drive as a second drive on my new pc is not possible to disable (if there is an option like that). As far as I know, that I can still use windows copy on a new pc as long as I'm not using it on the former as well. Am I wrong? If this is not the case, what can I do to activate it?
Concerning
Dimitar
The license for the software on a PC OEM used may not be transferred to a new or different PC.
= Charges / credit: Andre Da Costa =.
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
- The OEM licenses are tied to all first computer you install and activate it on.(Once installed, it cannot be moved / installed on another computer)
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
(Or install on a 2nd computer / replacement computer)
-OEM versions does not move directly from an older Windows operating system
J W Stuart: http://www.pagestart.com
-
Hello, I would be very happy to help. I recently tried the upgrade to windows 10 Professional, but then tried to downgrade to 7 Professional and problems have occurred. the downgrade was not working. So, I tried:
* a clean install with a disc of windows 7 sp1 (from the original e6430 provision for computer Latitude) and found windows 7 would not be updated.
* updated windows troubleshooting it is constantly with the same error and corrections:
Problems encountered:
-windows update error 0 x 80070003 (2016-06-13-T-11_06_27A) not set
-subscription to the service is missing or damaged fixed
-problems of recent installation updates fixed
-problems of recent installation updates fixed
* Reinstall system backup image
Same problems as each time I tried windows update it is stuck and troubleshooting that it comes up with the same error above.
Thanks in advance
M$ just came out this
You must use Internet explorer to download from the catalog
It is expected by M$, we must now jump through hoops to clean install.
http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/
On an existing installation after the restoration of an image...
https://support.Microsoft.com/en-us/KB/971058
And the most recent client update
Maybe you are looking for
-
I uninstalled Snap.do but not completely erase my whole history, nothing has worked so far. Whenever I open a new tab in Firefox, Snap.do is like the search bar. What a pain!
-
I am looking for the part number for the Windows 7 Professional SP1 reinstall the operating system on the desktop LTS Pro 4000. I'm working on the reinstallation of the operating system on a computer group for a company that installs and got mixed a
-
NI5105 digitizer and Measurement Studio 2010
Hi I'm new here. I have a problem that needs your help. My company just bought a PCI-5101 digitizer of NOR, we want to continually read an output signal of all 8 channels of this device for our project. Our project is under Microsoft VS 2010 and .net
-
Power RF transmitted by WRT54G
Hello I wanted to have a quick understanding of the power transmitted from WRT 54 G. The specification says that RF output power is 18 dBm. I guess it must be the max output power. However, I wanted to understand what that is the RF output power, alt
-
Problems type withWindow Vista Home Premium
Well Mr President... I did visit my mother yesterday and had a computer sitting next to her door, if it was a nearby computer and it ask me to look at him because he thought he had a virus. It's a Hp Pavilion with a processor AMD Phenom x 4... model