Windows 7 Windows Update error 80070422 and empty list updated

Similar Questions

• Why windows constantly error reports and turn off

  Why windows constantly error reports and turn off. It is THE most reliable service.

  * original title - sucks of windows *.

  Hello williamiscome,

  This error message do you receive?

  The computer shuts down or restarts it?

  Let know us and we will continue to help you.

  Best regards

  Matthew_Ha

• Windows Vista - Windows Defender error 0xc80000222 AND Windows Update, error 800800005

  I replaced the hard drive on my HP laptop and used the recovery disks to restore my computer to factory setting.  I also uninstalled Norton Anti Virus, download Mozilla Firefox and downloaded Avast Antivirus.  I tried to update, but got 2 two errors - Windows Defender error 0xc80000222 (the program cannot check the definition updates) and Windows Update error 800800005 (Windows could not search for new updates.).  I even tried to install Microsoft Fix to perform diagnostics, but it does not have (we're sorry, but Windows PowerShell could not run).  My system sign says that Windows is activated.  In the end, I want to use my upgrade for windows disk 8.  I used these discs before recovery without any problem.  Thank you.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Cannot install the update to windows. Error 66A and 643

  Original title: update

  What to do? the computer tells me to update I'm going through windows Updater runs and after a minute error 66 has 643 error happens and no updates, what can do to solve this problem?

  Hello

  1 how long have you been faced with this problem?

  2. don't you make changes on the computer before this problem?

  3. this happens while trying to install a specific update?

  Run the fix it tool in the following article and check

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  You can also consult the following articles that may help you resolve this problem.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  You receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
  http://support.Microsoft.com/kb/976982

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update
  http://support.Microsoft.com/kb/2507641/

• Service center security Windows XP (error 1060) and firewall (error 1075) have stopped working. dependencies not installed.

  I have Windows XP Pro SP3 and the Security Center and firewall stopped working. I couldn't restart using various commands in the statutes for help. I keep getting the below error messages. It seems that there is a service or services that I have to install that I'm not aware of...

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  My comment * Security Service does not work

  C:\>cmd/k SC QC WSCSVC

  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service.

  My comment * Windows Firewall does not work

  C:\>SC query sharedaccess

  Service_Name: sharedaccess

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)

  WIN32_EXIT_CODE: 1075 (0 X 433)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  C:\>net start sharedaccess

  1075 system error has occurred.

  The dependency service does not exist or has been marked for deletion.

  HOWEVER, when I click Start, click network connections: I have no icons to work with on the screen. See my other related post I copied below:

  "" error failed with error 0 x 80070424: the specified service does not exist as an installed sercies: "."

  To restore the missing "Network connections" service, you can use the reg. here:

  http://WindowsXP.MVPs.org/NetMan.htm
  But what cleared it is still a mystery. I would also run an analysis for virus/malware.

• DeskJet f4180: always E error message and empty cartridge light flashing after installing new cartridge

  I always get the error message E and empty flashing cartridge light after installing new black cartridge.

  Welcome to the @vinylzappaforum!

  I read on the 'E' and the empty cartridge light blinks after I installed a new black ink cartridge. If you have tried the guides that I suggested in our other thread here, so the next step would be to call phone support at HP to discuss your printer options coming with them. I let the info below.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Windows install error 2203 and system error 2147023504

  When I try to download programs I get error messages saying: MICROSOFT SQL SERVER 2008 NATIVE CLIENT - Setup has encountered an unexpected error and.  The error code is 2203. Database: C:/Windows/Installer/158445.ipi - cannot open the database file - system 2147023504 error

  Hello

  ·        What program are you trying to install on the system?

  Method 1:

  I suggest to follow the steps mentioned in the article below and try to install the program again and check if you are able to install the program without any problem or not.

  Note: This article applies to the Office application, but you can follow the steps, and then try to install the program on the system and check.

  You receive an "error 2203. An internal error has occurred"when you install Microsoft Office on Windows Vista

  http://support.Microsoft.com/kb/2000547

  Method 2:

  You can rename the file 158445.ipi to the former and then checks to see if you are able to install the application on the system. Follow the steps mentioned below to rename the file.

  a. click on Start menu and type run in the search box start and press to enter.

  b. in the run box, type setup, and then on enter.

  c. the Setup window will open and locate the file 158445.ipi and rename it to 158445.old and the tyre to install the application and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• No firewall or Internet, Windows Firewall errors: "0x8007042c" and "error 1068: the dependency service or group could start.

  Problem started when the McAfee Firewall shuts off and I could not turn it back on.  Also I can't activate Windows error 0x8007042c firewall.  Also no Internet access due to firewall restrictions.  Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start.  Strangely, the McAfee Firewall seems to be OK again?

  McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Windows Installer error message and CS6

  I installed Design Standard CS6, and the last message I got was Windows 7, that the software may not be installed correctly.

  What should I do?  Install again?  Is there something I can check?

  I opened CS6 and it seems to work very well, but at the end, I got another message that something was wrong.

  Thanks for any help.

  Carla

  Hey, I downloaded and installed new cs6, and am happy to say, without error messgages!  I think I'm good to go now.  Thanks for the reply fast tho.  I'll keep this email, just in case I have other problems.

  Carla

  770-546-3943

  www.CRedPhoto.zenfolio.com

• Why my vista basic machine displays error 80070422 with windows updates

  An older operator and an older machine, using Vista Basic, SP2, when downloading updates Windows gives error 80070422, cannot install updates.  Any ideas, could it be a virus or a decoration.  Nothing on the net about error 80070422

  Hello

  Were there any changes or updates made on the computer before the show?

  I suggest you to read the article about the Windows update 80070422 error and check if it helps:

  Windows Update, error 80070422, 80244019, or 8DDD0018

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Let us know if it helps.

• Code error 1058 and 80070422 in Windows Vista SP1 update

  I use Vista Home premium SP1 and now for a long time, that I was not able to use windows update. Im not sure when or how it started, but when I try to update, it gives the message: 'windows not can find new updates' Code 80070422.  In the Services under administrative tools for windows update description is: and when I try to start the service, it comes with a: Error 1058

  I also tried a few fix by doing a repair.bat I've read here, but when I run the application it (it disappears quickly) it says something about error 1058 so...

  I really hope someone here can help me!

  Best regards...

  Hi DonJazz,

  The most common cause is a computer virus that has disabled the automatic update of Windows, or another service on your computer that is required by Windows Update. If your computer is infected with a virus, you will need to analyze and clean first and then restart these services. While your computer may not be infected with a virus, it is recommended that you follow the steps to search for viruses and then turn on the services.

  To restart in Mode safe and search for possible viruses

  If a virus infects a computer, it often blocks the ability of the computer to run antivirus programs or causes these ineffective programs. Follow these steps to control and eradicate any viruses:

  1. reboot your computer in safe mode. For more information, see start your computer in safe mode .

  2. scan your computer for viruses.

  3. Please see How to get rid of malware for more information on removing the virus programs and malware from your computer

  4. Once you've scanned and removed any viruses, restart your computer.

  For more information about restarting the services required by windows update, please see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Hope this information helped you.

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Update error codes: 00000646, 8024402C, 80070422, 80244019, 8DDD018 and 80070643?

  HP laptop (pavilion dv2000) Vista os - bad began last Dec

  BartBrammer,
  I suggest starting with this thread: what to post in the Windows Update forum

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update, error 0 x 80070422

  Windows Defender can't check for definition updates.

  Windows Update error 80070422 http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80070422>

  Consult the below Microsoft article and try the steps mentioned and check if it works.

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355/en-us>

• I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

  Windows Update
  Error (s) found: code 80070645 windows has encountered an unknown error.
  I had before the shock of two antivirus this proven system restoration started but no help.
  Fix it to charge microsoft, but has not helped any.

  How can we if this problem, so I can install the updates I need?

  Hi Wyattsdaddy,

  Thanks for posting your question.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

  Step 5: Disable the security software
  Note: You can enable it later.
  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  http://support.Microsoft.com/kb/949104/

  Step 7: Components to reset Windows Update
  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried windows update but keep getting error code 80070490 and 8024402 C which can do then, I'm not a computer expert, somebady ga help.

  the problem began with frequent blue screens, and then a few updates for SP1 and SP2

  Are you using Vista?

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vista - step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed. http://support.Microsoft.com/kb/948537

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services