Scanning with HP Scanjet N6310

Similar Questions

• HP 4100C scanning with imac Mavricks 10.9

  Since the upgrade to 10.9 OSX, I am unable to scan and save documents using my HP 4100 C.  I get a message, most of the error, cannot write to the document, the permissions may need to be changed.  When you view the document, all I see is a black page with a series of white lines.

  How can this problem be fixed?

  Hi okeithp,

  Welcome to the HP forums!

  I'm sorry to hear you had problems with your Scanjet 4100c scan since update to OS X 10.9 but I will certainly do my best to explain why and to point you in the right direction

  As far as I know, the Scanjet 4100c is not supported in Mac 10.9. This list of printers supported for OS X 10.9 does not list your scanner at all, so I'm leaning towards the Scanjet not supported in Mac 10.9.

  Before moving the scanner well, I'll recommend you try one of the third-party scan software solutions offered by HP and see if it will work first.

  Otherwise, please call HP Technical Support to see if they have a job in the options to help you with your decision of what it will have to level to

  Hope this helps, have a great weekend!

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• After the update to firefox 17.0 when I do a scan with Norton 360 it does not pick up the tracking cookies which changed 16.0.02

  After the update to firefox 17.0 when I do a scan with Norton 360, it is no longer captures the rejected. These cookies that have been picked up with firefox 16.0.02 what you have changed? Plus, I'm getting sick of these updates - at least we tell users what has changed in new versions.

  First of all, we do not say what has changed in each version, http://www.mozilla.org/en-US/firefox/17.0/releasenotes/.

  Secondly, Norton should always be able to delete your cookies (just so that you know that the cookies are generally harmless, and you don't need to worry to remove). If not, you can delete the cookies in Firefox Cookies - Information that Web sites store on your computer

• Can't scan with HP LaserJet MFP M127fw Pro

  I have installed the printer driver and tried to follow the instructions in the manual to scan a document.  When I find my printer folder in the start menu/all programs, there is no option to scan. Help!

  Hi @3Digit .

  I see that you are having problems of analysis, it is not any scanner in the HP folder software. I would like to help you today.

  Open the HP scanning with one of the following methods:

• OfficeJet 8730: Scanning Resolution maximum of scanning with ADF for OfficeJet 8730/40 models

  I found that the reolution max for scanning with the ADF for the 8720 model is 300 dpi.

  The question is whether this limitation is also on 8730/40 models?

  Hello
  
  Thank you for using the HP Forums.

  This post will explain the limitation.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quot-add-scan-pages-quot-for-resolution-up-to-300dpi-only/TD-p/5371575

  In addition, this resource will show or how to set high resolution:

  Create a shortcut to scan and scans high-resolution (HP Officejet Pro AiO 8700 series)

  Hope that helps!

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• HP Photo Smart D5110 will not scan with Mac OS 10.9

  Help. I've looked everywhere and can't always come up with a solution to scan from my Photosmart. Worked fine until I upgraded to Maverick. Thank you!

  WelchSHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking in your scanning options. I would try to help.

  Due to the age of the printer, there is no HP software for this printer on Mavericks.  You can, however, use the characters of basic Mac OS and drivers to scan.  I'm including a document on the installation and using the printer on a Macthat should help you to solve this particular section of the document titled "How to scan with Apple software update driver?"

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Not able to scan with my printer [Krishna]

  Hello

  I am not able to scan with my printer.

  Model No.: P3010

  Serial No.: P3015d

  If you have a HP Laserjet P3010 is a printer function and it has not any ability to scan.

• Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

  When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

  Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

  In addition, Windows Fax and Scan cannot scan to PDF.

  Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

  If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

• Scanning with Paint in Windows 8

  Hello everyone

  Here's a video that shows how you can scan with Microsoft Paint in Windows 8.

  Sometimes your scanning software may not work, or your printer may not have a print driver basis. If Yes, you can use Microsoft Paint to scan. Scan using MS Paint will allow you to save them as JPEG, BMP image files, etc. Digitization of paint cannot scan to PDF.

  Scanning with MS Paint can also be used to as a troubleshooting step. If you are having problems scanning try using MS Paint. If it works, then the scanning equipment works properly.

  When you install a printer driver in Windows 8, you can scan using paint from your computer without having to install any additional software to HP.
  
  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  I hope that the video turns out to be useful.

  Scanning with paint, it's quick and easy to analyze something in an image format.

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!